Multi-analyte sensing: a chemometrics approach to understanding the merits of electrode arrays versus single electrodes

A peptide-modified electrode array with a different peptide on each electrode is compared with a single electrode modified with many peptides for the voltammetric measurement of concentrations of Cu(2+), Cd(2+) and Pb(2+) in solution. The single gold electrode was modified simultaneously with peptides Gly-Gly-His, glutathione and angiotensin I each coupled to thioctic acid, and thioctic acid itself, and the calibration of mixtures of ions was compared with previously published data from an array of four sensors each with an individual modification. Calibration at the multi-peptide single-electrode sensor was by two-way partial least squares (voltammetric current measured with variables 'sample' x 'potential') and for the electrode array by three-way NPLS1 ('sample' x 'potential' x 'electrode'). The advantage of designing experiments to yield multi-way data is demonstrated and discussed.     

Voltammetric behaviour and trace determination of copper at a mercury-free screen-printed carbon electrode

Screen-printed carbon electrodes (SPCEs), without chemical modification, have been investigated as disposable sensors for the measurement of trace levels of Cu(2+). Cyclic voltammetry was employed to elucidate the electrochemical behaviour of Cu(2+) at these electrodes in a variety of supporting electrolytes. For all of the electrolytes studied the anodic peaks, obtained on the reverse scans, showed that the Cu(2+) had been deposited as a thin layer on the surface of the SPCE. The anodic peak of greatest magnitude was obtained in 0.1 M malonic acid. The possibility of determining Cu(2+) at trace levels using this medium was examined by differential pulse anodic stripping voltammetry (DPASV). The effect of Bi(3+), Cd(2+), Fe(3+), Hg(2)(2+), Pb(2+), Sb(3+) and Zn(2+) on the Cu stripping peak was examined and under the conditions employed, only Hg(2)(2+) was found to significantly effect the response gained. The sensors were evaluated by carrying out Cu(2+) determinations on spiked and unspiked serum and water samples. The mean recovery was found in all cases to be >90% and the performance characteristics indicated the method holds promise for trace Cu(2+) levels by employment of Hg-free SPCEs using DPASV.     

Amide Group Coordination to the Pb(2+) Ion

The binary and ternary (2,2'-bipyridine) complexes of dipositive lead formed by N-carbonyl and N-sulfonyl amino acids, which are ligands containing the peptide and the sulfonamide group, respectively, were investigated in aqueous solution by NMR and differential pulse polarography, and some were also characterized crystallographically. N-Tosylglycine, N-tosyl-beta-alanine, and N-benzoylglycine behave as simple carboxylate ligands at acid pH, while around neutrality they switch to dianionic N,O-bidentate chelating ligands due to the involvement of the deprotonated amide nitrogen as an additional donor site. The same coordination behavior is maintained in the presence of 2,2'-bipyridine. The binary and ternary species formed in solution, and their stability constants were determined and compared with those of the homologous complexes of Pd(2+), Cu(2+), Cd(2+), and Zn(2+). The Pb(2+) ion is the only dipositive metal which is effective in promoting peptide nitrogen deprotonation in benzoylglycine. The molecular structures of [Pb(N-tosylglycinato-N,O)(H(2)O)] (1), [Pb(N-benzoylglycinato-O)(2)(H(2)O)(2)].2H(2)O (2), and [Pb(N-tosylglycinato-O)(2)(bpy)] (3) were determined by X-ray crystallography (O and N,O refer to the ligands binding as carboxylates and as N,O-chelating dianions, respectively). These compounds are all polymeric with six- to eight-coordinate metals showing distorted coordination geometries indicative of a stereochemically active metal lone pair. Polymerization is invariably determined by a bidentate chelate carboxylate group with one oxygen bridging between two metals, and in 2 and 3 it occurs through the formation of chains of Pb(2)O(2) square-planar rings. The binding set in 1, involving a deprotonated amide nitrogen and a sulfonic oxygen, is unprecedented for the Pb(2+) ion. This work provides new information on the solution and solid state chemistry of dipositive lead with ligands of biological interest, a research area that has received little attention in the past, although it is of great relevance for understanding the mechanisms of metal toxicity.     

Bis[1,1'-N,N'-(2-picolyl)aminomethyl]ferrocene as a redox sensor for transition metal ions

The compound bis[1,1'-N,N'-(2-picolyl)aminomethyl]ferrocene, L(1), was synthesized. The protonation constants of this ligand and the stability constants of its complexes with Ni(2+), Cu(2+), Zn(2+), Cd(2+) and Pb(2+) were determined in aqueous solution by potentiometric methods at 25 degrees C and at ionic strength 0.10 mol dm(-3) in KNO(3). The compound L(1) forms only 1:1 (M:L) complexes with Pb(2+) and Cd(2+) while with Ni(2+) and Cu(2+) species of 2 [ratio] 1 ratio were also found. The complexing behaviour of L(1) is regulated by the constraint imposed by the ferrocene in its backbone, leading to lower values of stability constants for complexes of the divalent first row transition metals when compared with related ligands. However, the differences in stability are smaller for the larger metal ions. The structure of the copper complex with L(1) was determined by single-crystal X-ray diffraction and shows that a species of 2:2 ratio is formed. The two copper centres display distorted octahedral geometries and are linked through the two L(1) bridges at a long distance of 8.781(10) Angstrom. The electrochemical behaviour of L(1) was studied in the presence of Ni(2+), Cu(2+), Zn(2+), Cd(2+) and Pb(2+), showing that upon complexation the ferrocene-ferrocenium half-wave potential shifts anodically in relation to that of the free ligand. The maximum electrochemical shift ([capital Delta]E(1/2)) of 268 mV was found in the presence of Pb(2+), followed by Cu(2+)(218 mV), Ni(2+)(152 mV), Zn(2+)(111 mV) and Cd(2+)(110 mV). Moreover, L(1) is able to electrochemically and selectively sense Cu(2+) in the presence of a large excess of the other transition metal cations studied.     

Ion exchange of Pb(2+), Cu(2+), Fe(3+), and Cr(3+) on natural clinoptilolite: selectivity determination and influence of acidity on metal uptake

In the present study ion exchange of Pb(2+), Cu(2+), Fe(3+), and Cr(3+) on natural Greek clinoptilolite was examined in terms of selectivity toward the above heavy metals in single- and multicomponent solutions in batch systems. Also examined are the influence of clinoptilolite on solution acidity and the effect of acidity on the ion exchange process. Clinoptilolite increases solution acidity due to the exchange of H(+) cations with the cations initially present in its structure. H(+) cations should be considered as competitive ones in ion exchange processes, and consequently ion exchange of metals is favored at high acidity values. Cu(2+) and Cr(3+) are the most sensitive cations with respect to acidity. Selectivity determination demonstrates that the selectivity at total concentration 0.01 N and acidity 2 in both single- and multicomponent solutions is following the order Pb(2+)>Fe(3+)>Cr(3+) > or =Cu(2+). This order is set since the first days of equilibration. However, Cu(2+) shows remarkable changes in selectivity and generally its uptake and selectivity are increasing with time. On the other hand selectivity in single metal solutions where acidity is not adjusted is following the order Pb(2+)>Cr(3+)>Fe(3+) congruent with Cu(2+).     

Structural characterization of new Cd(2+) fluorescent sensor based on lumazine ligand: AM1 and ab initio studies

6-Thienyllumazine (TLM) is synthesized as a new fluorescent sensor that is capable of indicating selectively the presence of Cd(2+) ion via a fluorescence signal. Experiment has been performed in the presence of Ni(2+), Co(2+), Cu(2+), Ag(+), Mn(2+), Hg(2+), Zn(2+), Pb(2+), and Mg(2+) metal ions in aqueous solutions. The product was characterized by elemental analysis, mass, and NMR spectra. The spectral characteristics (maxima, quantum yields, Stokes shift, and lifetimes) of TLM in organic and aqueous solvents have been studied with the help of absorption and fluorescence spectroscopy, as well as, using time dependent spectrofluorimetry (single photon counting technique). The fluorescence dependence of TLM on the pH has also been investigated. The experimental results indicate that TLM exists in two ionic forms: neutral (acid) and anion (base). Electronic structure calculations of TLM were carried out using Semiempirical Austin Model 1 (AM1) and ab initio Hartree-Fock (HF) with 6-31G* basis set and using Gaussian 03 program. Absorption energies for TLM have been calculated using ZINDO method. The theoretical results confirm the presence of the thiophene and pteridine rings in two conformations: twisted at angle of about 35 degrees in the excited state and coplanar in the ground state.     

Terphenyl-phenanthroline conjugate as a Zn(2+) sensor: H(2)PO(4)(-) induced tuning of emission wavelength

A new terphenyl-based macrocycle 5 incorporating phenanthroline as a fluorophore has been designed, synthesized and examined for its recognition ability toward various cations (Pb(2+), Hg(2+), Ba(2+), Cd(2+), Ag(+), Zn(2+), Cu(2+), Ni(2+), Co(2+), K(+), Mg(2+), Na(+) and Li(+)) by UV-vis, fluorescence and NMR spectroscopy. The receptor 5 showed highly selective 'Off-On' fluorescence signaling behavior for Zn(2+) ions in THF. Interestingly, the addition of H(2)PO(4)(-) ions to the [5-Zn] complex regulates the binding site for additional Zn(2+) ions and hence leads to a blue-shifted emission band.     

Removal and regeneration of aqueous divalent cations by boehmite

Boehmite (Al(OH)O) was employed for the removal of aqueous Mg(2+), Cu(2+), Cd(2+), Pb(2+), and Co(2+) at 298 K. Although boehmite was able to remove these divalent cations, the greater removal rate with boehmite of Pb(2+) (28.7%) than with Mg(2+), Cu(2+), Cd(2+), and Co(2+) (5.6, 25.3, 10.9, and 13.3%, respectively) was observed under acidic conditions. Under stronger alkaline conditions, in which the lead species was completely dissolved, a greater removal rate of Pb(2+) (more than 80%) was observed under the corresponding conditions employed for the acidic conditions. The removed lead species could not be dissolved from boehmite in an acidic solution while an evident dissolution of lead species was detected using an aqueous NaOH solution. The results shown in the present study reveal that boehmite can be employed as a reagent for the removal and regeneration of aqueous metal cations.     

Chemometric analysis of voltammetric data on metal ion binding by selenocystine

The behavior of selenocystine (SeCyst) alone or in the presence of various metal ions (Bi(3+), Cd(2+), Co(2+), Cu(2+), Cr(3+), Ni(2+), Pb(2+), and Zn(2+)) was studied using differential pulse voltammetry (DPV) over a wide pH range. Voltammetric data matrices were analyzed using chemometric tools recently developed for nonlinear data: pHfit and Gaussian Peak Adjustment (GPA). Under the experimental conditions tested, no evidence was found for the formation of metal complexes with Bi(3+), Cu(2+), Cr(3+), and Pb(2+). In contrast, SeCyst formed electroinactive complexes with Co(2+) and Ni(2+) and kinetically inert but electroactive complexes with Cd(2+) and Zn(2+). Titrations with Cd(2+), Co(2+), Ni(2+), and Zn(2+) produced data that were reasonably consistent with the formation of stable 1:1 M(SeCyst) complexes.     

A highly selective fluorescence-based polymer sensor incorporating an (R,R)-salen moiety for Zn(2+) detection

A chiral polymer incorporating an (R,R)-salen moiety was synthesized by the polymerization of (R,R)-1,2-diaminocyclohexane with 2,5-dibutoxy-1,4-di(salicyclaldehyde)-1,4-diethynyl-benzene by a nucleophilic addition-elimination reaction. The fluorescence responses of the (R,R)-salen-based polymer toward various metal ions were investigated by fluorescence spectra. Compared with other cations, such as Na(+), K(+), Mg(2+), Ca(2+), Mn(2+), Fe(2+), Fe(3+), Co(2+), Ni(2+), Cu(2+), Ag(+), Cd(2+), Hg(2+), and Pb(2+), Zn(2+) can lead to a pronounced fluorescence enhancement as high as 7.8-fold together with an obvious blue-shift change of the chiral polymer. More importantly, the fluorescent color of the polymer changed to bright blue instead of weak yellow after addition of Zn(2+), which can be easily detected by the naked eye. The results indicate that this kind of chiral polymer, incorporating an (R,R)-salen moiety as a receptor in the main chain backbone, can exhibit high sensitivity and selectivity for Zn(2+) recognition.     

Selective colorimetric sensing of Cu2+ using triazolyl monoazo derivative

Although the high sensitivity, high selectivity and fast response make emission (fluorescence) based technique as one of the most promising tool for developing the chemosensors for metal ions, the past few years have witnessed a demand for the absorption based chemosensors for paramagnetic heavy metal ions, especially Cu(2+). Being paramagnetic, Cu(2+) leads to the low signal outputs ("turn-off") caused by decreased emission which may sometimes give false positive response, rendering the emission based technique less reliable for analytical purposes. Herein, we report synthesis and characterization of a hetarylazo derivative, characterized by a strong charge-transfer band which gets attenuated convincingly in the presence of Cu(2+) leading to distinct naked-eye color change (yellow to purple), and to a lesser extent in the presence of Cd(2+), Zn(2+), Co(2+), Pb(2+), Fe(2+), Ni(2+), Fe(3+) and Hg(2+) for which the naked eye sensitivity was comparatively (w.r.t. Cu(2+)) much less. No response was observed for the other metal ions including Li(+), Na(+), K(+), Mg(2+), Ca(2+), Ba(2+), Mn(2+), Ag(+), Zn(2+), Cd(2+), Pb(2+), and lanthanides Ce(3+), La(3+), Pr(3+), Eu(3+), Nd(3+), Lu(3+), Yb(3+), Tb(3+), Sm(3+), Gd(3+). The proposed sensing mechanism has been ascribed to the stabilization of LUMO after complexation with Cu(2+) and a 1:1 stoichiometry has been deduced.     

Adsorption of Pb2+, Zn2+, and Cd2+ from waters by amorphous titanium phosphate

In the current study, amorphous titanium phosphate (TiP) was prepared as an adsorbent for heavy metals from waters. Uptake of Pb(2+), Zn(2+), and Cd(2+) onto TiP was assayed by batch tests; a polystyrene-sulfonic acid exchanger D-001 was selected for comparison and Ca(2+) was chosen as a competing cation due to its ubiquitous occurrence in waters. The pH-titration curve of TiP implied that uptake of heavy metals onto TiP is essentially an ion-exchange process. Compared to D-001, TiP exhibits more preferable adsorption toward Pb(2+) over Zn(2+) and Cd(2+) even in the presence of Ca(2+) at different levels. FT-IR analysis of the TiP samples laden with heavy metals indicated that the uptake of Zn(2+) and Cd(2+) ions onto TiP is mainly driven by electrostatic interaction, while that of Pb(2+) ions is possibly dependent upon inner-sphere complex formation, except for the electrostatic interaction. Moreover, uptake of heavy metals onto TiP approaches equilibrium quickly and the exhausted TiP particles could be readily regenerated by HCl solution.     

2,1,3-Benzoxadiazole-based selective chromogenic chemosensor for rapid naked-eye detection of Hg2+ and Cu2+

We report a simple twisted intramolecular charge transfer (TICT) chromogenic chemosensor for rapid and selective detection of Hg(2+) and Cu(2+). The sensor was composed of an electron-acceptor 4-fluoro moiety and an electron-donor 7-mercapto-2,1,3-benzoxadiazole species where the S together with the 1-N provided the soft binding unit. Upon Hg(2+) and Cu(2+) complexation, remarkable but different absorbance spectra shifts were obtained in CH(3)CN-H(2)O mixed buffer solution at pH 7.6, which can be easily used for naked-eye detection. The sensor formed a stable 2:1 complex with Cu(2+), and both 2:1 and 3:1 complexes with Hg(2+). While alkali-, alkaline earth- and other heavy and transition metal ions such as Na(+), Mg(2+), Mn(2+), Co(2+), Ni(2+), Ag(+), Zn(2+), Pb(2+) and Cd(2+) did not cause any significant spectral changes of the sensor. This finding is not only a supplement to the detecting methods for Hg(2+) and Cu(2+), but also adds new merits to the chemistry of 4,7-substituted 2,1,3-benzoxadiazoles.     

A squaraine-based colorimetric and "turn on" fluorescent sensor for selective detection of Hg2+ in an aqueous medium

A novel squaraine-based chemosensor SQ-1 has been synthesized, and its sensing behavior toward various metal ions was investigated by UV-vis and fluorescence spectroscopies. In AcOH-H(2)O (40:60, v/v) solution, Hg(2+) ions coordinate with SQ-1 causing a deaggregation which induces a visual color and absorption spectral changes as well as strong fluorescence. In contrast, the addition of other metals (e.g., Pb(2+), Cd(2+), Cu(2+), Zn(2+), Al(3+), Ni(2+), Co(2+), Fe(3+), Ca(2+), K(+), Mg(2+), Na(+), and Ag(+)) does not induce these changes at all. Thus SQ-1 is a specific Hg(2+) sensing agent due to the inducing deaggregation of the dye molecule by Hg(2+).     

1H and (113)Cd NMR Investigations of Cd(2+) and Zn(2+) Binding Sites on Serum Albumin: Competition with Ca(2+), Ni(2+), Cu(2+), and Zn(2+)

1H and (113)Cd NMR studies are used to investigate the Cd(2+) binding sites on serum albumin (67 kDa) in competition with other metal ions. A wide range of mammalian serum albumins possess two similar strong Cd(2+) binding sites (site A 113-124 ppm; site B 24-28 ppm). The two strong sites are shown not to involve the free thiol at Cys34. Ca(2+) influences the binding of Cd(2+) to isolated human albumin, and similar effects due to endogenous Ca(2+) are observed for intact human blood serum. (1)H NMR studies show that the same two His residues of human serum albumin are perturbed by Zn(2+) and Cd(2+) binding alike. Zn(2+) displaces Cd(2+) from site A which leads to Cd(2+) occupation of a third site (C, 45 ppm). The N-terminus of HSA is not the locus of the two strong Cd(2+) binding sites, in contrast to Cu(2+) and Ni(2+). After saturation of the N-terminal binding site, Cu(2+) or Ni(2+) also displaces Cd(2+) from site A to site C. The effect of pH on Cd(2+) binding is described. A common Cd(2+)/Zn(2+) binding site (site A) involving interdomain His residues is discussed.     

Silver(I)-selective membrane electrodes based on sulfur-containing podands

Some podands, acyclic polyethers, were utilized as membrane active components to prepare Ag(+)-selective polymeric membrane electrodes. The thiapodand-based electrodes exhibited considerable selectivity toward Ag(+) over other heavy metal ions including Cd(2+), Pb(2+), Cu(2+) and Hg(2+). Also, good selectivity over alkali and alkali earth metal ions were observed. Response slopes, pH effects, response time, and signal baseline return of the sensor systems were studied in static mode and/or in a flow-injection system. The Ag(+)-selectivity was explained by the soft-soft interaction of the Ag(+) ion with the sulfur donor atoms as well as the stacking interaction between aromatic end groups of the host molecule on complexation.     

Studies on metallochromic indicators-III Hematoxylin and hematein

The use of hematoxylin and hematein as metallochromic indicators in direct EDTA titration of Zr(4+), Th(4+), Bi(3+), VO(+), Ga(3+), In(3+), Al(3+), Pb(+), Zn(2+), Mn(2+), Cd(2+), Cu(2+), Ni(2+), Co(2+), Mg(2+), and a few rare earths is described. Aluminium is titrated directly in presence of acetate buffer, lactic or glycoliic acid being used as auxiliary complexing agent. Mixtures of two metal ions can be titrated if one is Bi(3+) and the other Al(3+), Pb(2+), Zn(2+), Cu(2+), Cd(2+), La(3+), Ce(3+), Pr(3+), Nd(3+), Sm(3+), Gd(3+) or Er(3+). Aluminium alloys can be analysed via EDTA titrations, with these indicators.     

A water soluble Al(3+) selective colorimetric and fluorescent turn-on chemosensor and its application in living cell imaging

An efficient water soluble fluorescent Al(3+) receptor, 1-[[(2-furanylmethyl)imino]methyl]-2-naphthol (1-H) was synthesized and characterized by physico-chemical and spectroscopic tools along with single crystal X-ray crystallography. High selectivity and affinity of 1-H towards Al(3+) in HEPES buffer (DMSO/water: 1/100) of pH 7.4 at 25 °C showed it to be suitable for detection of intracellular Al(3+) by fluorescence microscopy. Metal ions, viz. alkali (Na(+), K(+)), alkaline earth (Mg(2+), Ca(2+)), and transition-metal ions (Ni(2+), Zn(2+), Cd(2+), Co(2+), Cu(2+), Fe(3+), Cr(3+/6+), Hg(2+)) and Pb(2+), Ag(+) did not interfere. The lowest detection limit for Al(3+) was calculated to be 6.03 × 10(-7) M in 100 mM HEPES buffer (DMSO/water: 1/100). Theoretical calculations have also been included in support of the configuration of the probe-aluminium complex.     

Dansyl-anthracene dyads for ratiometric fluorescence recognition of Cu2+

Dansyl-anthracene dyads 1 and 2 in CH(3)CN-H(2)O (7:3) selectively recognize Cu(2+) ions amongst alkali, alkaline earth and other heavy metal ions using both absorbance and fluorescence spectroscopy. In absorbance, the addition of Cu(2+) to the solution of dyads 1 or 2 results in appearance of broad absorption band from 200 nm to 725 nm for dyad 1 and from 200 nm to 520 nm for dyad 2. This is associated with color change from colorless to blue (for 1) and fluorescent green (for 2). This bathochromic shift of the spectrum could be assigned to internal charge transfer from sulfonamide nitrogen to anthracene moiety. In fluorescence, under similar conditions dyads 1 and 2 on addition of Cu(2+) selectively quench fluorescence due to dansyl moiety between 520-570 nm (for 1)/555-650 nm (for 2) with simultaneous fluorescence enhancement at 470 nm and 505 nm for dyads 1 and 2, respectively. Hence these dyads provide opportunity for ratiometric analysis of 1-50 μM Cu(2+). The other metal ions viz. Fe(3+), Co(2+), Ni(2+), Cd(2+), Zn(2+), Hg(2+), Ag(+), Pb(2+), Li(+), Na(+), K(+), Mg(2+), Ca(2+), Ba(2+) do not interfere in the estimation of Cu(2+) except Cr(3+) in case of dyad 1. The coordination of dimethylamino group of dansyl unit with Cu(2+) causes quenching of fluorescence due to dansyl moiety between 520-600 nm and also restricts the photoinduced electron transfer from dimethylamino to anthracene moiety to release fluorescence between 450-510 nm. This simultaneous quenching and release of fluorescence respectively due to dansyl and anthracene moieties emulates into Cu(2+) induced ratiometric change.     

Dual-mode unsymmetrical squaraine-based sensor for selective detection of Hg2+ in aqueous media

A novel chemosensor based on unsymmetrical squaraine dye (USQ-1) for the selective detection of Hg(2+) in aqueous media is described. USQ-1 in combination with metal ions shows dual chromogenic and "turn-on" fluorogenic response selectivity toward Hg(2+) as compared to Li(+), Na(+), K(+), Mg(2+), Ca(2+), Ba(2+), Al(3+), Cu(2+), Cd(2+), Mn(2+), Fe(3+), Ag(+), Pb(2+), Zn(2+), Ni(2+) and Co(2+) due to the Hg(2+)-induced deaggregation of the dye molecule. A recognition mechanism based on the binding mode is proposed based on the absorption and fluorescence changes, (1)H NMR titration experiments, ESI-MS study, and theoretical calculations.