Densities and Viscosities of the Regular Quinary System: Benzene (1) + Toluene (2) + Ethylbenzene (3) + Heptane (4) + Cyclooctane (5) and Its Quaternary Sub-Systems at 293.15 and 298.15 K

The densities and viscosities of the regular quinary system: benzene (1) + toluene (2) + ethylbenzene (3) + heptane (4) + cyclooctane (5), and all its corresponding quaternary sub-systems were measured over the entire composition range at 293.15 and 298.15 K. Kinematic viscosity–composition data reported in the present study were utilized to test the predictive capability of some well-known viscosity models. The models subjected to testing were: the predictive version of the McAllister’s three-body model, a generalized corresponding states principle, the group contribution GC-UNIMOD method, and the Allan and Teja correlation. Results of testing these models led to an overall AAD (%) of 1.20 for the one quaternary system that did not contain cyclooctane, and an overall AAD (%) of 8.59 for the remaining cyclooctane-containing systems. For the quinary system, the overall AAD (%) was found to be 2.92; the last two values were calculated using the value of cyclooctane of 10.595.     

Study of some volumetric and refractive properties of {PEG 300 (1) + ethanol (2)} mixtures at several temperatures

Molar volumes and excess molar volumes were investigated from measured density values for {PEG 300 (1) + ethanol (2)} binary mixtures at temperatures from 278.15 to 313.15 K. Both systems exhibit negative excess volumes probably due to increased interactions like hydrogen bonding and/or large differences in molar volumes of the components. Volume thermal expansion coefficients were also calculated for both binary mixtures and pure solvents. Refractive indices were also determined for all these non-aqueous mixtures and neat solvents at all temperatures. Furthermore, the Jouyban–Acree model was used for density, molar volume and refractive index correlations of the studied mixtures at different temperatures. The mean relative deviations between experimental and back-calculated density, molar volume and refractive index data were 0.07%, 0.99% and 0.01%, respectively.     

Interaction between Glyoxal-bis-(2-hydroxyanil) and Bovine Serum Albumin in Solution

The interaction between glyoxal-bis-(2-hydroxyanil) (GBH) and bovine serum albumin (BSA) was studied by spectroscopic methods including fluorescence spectroscopy, circular dichroism (CD) and UV–visible absorption spectra. The mechanism for quenching the fluorescence of BSA by GBH is discussed. The number of binding sites n and observed binding constant K _b were measured by the fluorescence quenching method. The thermodynamic parameters ΔH ^θ , ΔG ^θ , and ΔS ^θ were calculated at different temperatures and the results indicate that hydrogen bonding and van der Waals forces played major roles in the reaction. The distance r between the donor (BSA) and acceptor (GBH) molecules was obtained according to Förster’s theory of non-radiation energy transfer. Synchronous fluorescence and three-dimensional fluorescence spectra were used to investigate the structural change of BSA molecules that occur upon addition of GBH, and these results indicate that the secondary structure of BSA molecules is changed by the presence of GBH.     

Synthesis, Solution Equilibria and Antibacterial Activity of Co(II) with 2-(Aminomethyl)-Benzimidazole and Dicarboxylic Acids

Formation equilibria of cobalt(II) complexes of 2-(aminomethyl)-benzimidazole (AMBI) and the ternary complexes Co(AMBI)L (L = aliphatic or aromatic dicarboxylic acids) were investigated in aqueous solutions at 25?°C and 0.1 mol?dm^?3 ionic strength. Stoichiometry and stability constants are reported for the complexes formed. The speciation of the complexes was resolved. Values of $\log_{10}\ (K_{\mathrm{Co(AMBI)L}}^{\mathrm{Co(AMBI)}})$ and Δlog?₁₀ K are calculated and discussed. The effect of chelate ring size of the dicarboxylic acid complexes on their stability constants was examined. The effect of temperature on the dissociation constant of AMBI, CBDCA, and the formation constant of Co(AMBI) and Co(AMBI)-CBDCA complexes was studied and the thermodynamic parameters were calculated. Formation of the metal complexes has been found to be spontaneous, exothermic and entropically favorable. The solid complexes of [Co(AMBI)L] (L = oxalic acid, 1,1-cyclobutanedicarboxylic acid (CBDCAH₂) and malonic acid) have been synthesized and characterized by elemental analysis, infrared, spectra, magnetic and conductance measurements. Electronic spectra and μ _eff values suggest a tetrahedral geometry for Co(II)-complexes. The isolated metal chelates have been screened for their antibacterial activities and the complexes show a significant antibacterial activity against Pseudomonas fluorescence (Gram ?ve) and Bacillus subtilis (Gram +ve). The activity increases at higher concentration of the compounds.     

Isopiestic Investigation of the Osmotic and Activity Coefficients of {yMgCl2+(1−y)MgSO4}(aq) and the Osmotic Coefficients of Na2SO4⋅MgSO4(aq) at 298.15 K

Isopiestic vapor-pressure measurements were made for {yMgCl₂+(1−y)MgSO₄}(aq) solutions with MgCl₂ ionic strength fractions of y=(0,0.1997,0.3989,0.5992,0.8008, and 1) at the temperature 298.15 K, using KCl(aq) as the reference standard. These measurements for the mixtures cover the ionic strength range I=0.9794 to 9.4318 mol⋅kg⁻¹. In addition, isopiestic measurements were made with NaCl(aq) as reference standard for mixtures of {xNa₂SO₄+(1−x)MgSO₄}(aq) with the molality fraction x=0.5000 that correspond to solutions of the evaporite mineral bloedite (astrakanite), Na₂Mg(SO₄)₂⋅4H₂O(cr). The total molalities, m _T=m(Na₂SO₄)+m(MgSO₄), range from m _T=1.4479 to 4.4312 mol⋅kg⁻¹ (I=5.0677 to 15.509 mol⋅kg⁻¹), where the uppermost concentration is the highest oversaturation molality that could be achieved by isothermal evaporation of the solvent at 298.15 K. The parameters of an extended ion-interaction (Pitzer) model for MgCl₂(aq) at 298.15 K, which were required for an analysis of the {yMgCl₂+(1−y)MgSO₄}(aq) mixture results, were evaluated up to I=12.075 mol⋅kg⁻¹ from published isopiestic data together with the six new osmotic coefficients obtained in this study. Osmotic coefficients of {yMgCl₂+(1−y)MgSO₄}(aq) solutions from the present study, along with critically-assessed values from previous studies, were used to evaluate the mixing parameters of the extended ion-interaction model.     

The Partial Molar Heat Capacities and Expansions of Inosine, 2′-Deoxyinosine and 2′-Deoxyguanosine in Aqueous Solution at 298.15 K

Solution densities over the temperature range 288.15 to 313.15 K have been measured for aqueous solutions of the nucleosides inosine, 2′-deoxyinosine, and 2′-deoxyguanosine, from which the partial molar volumes of the solutes at infinite dilution, V ₂^o, were obtained. The partial molar expansions for the nucleosides at infinite dilution and 298.15 K, E ₂^o {E ₂^o=(∂ V ₂^o/∂ T) _p }, were derived from the V ₂^o results. The V ₂^o values at 298.15 K for the two sugars D-ribose and 2-deoxyribose also have been determined. The partial molar heat capacities at infinite dilution for all the solutes, C _p,2^o, have been determined at 298.15 K. These V ₂^o,E ₂^o, and C _p,2^o results are critically compared with all of the results available from the literature, and the use of group additivity to evaluate these solution thermodynamic properties for the sparingly soluble nucleoside guanosine is explored.     

Coordination Features of a Polyaza-Bipyridine-Macrocyclic Ligand toward Co(II) and Cd(II) in Water and Dimethylsulfoxide

The coordination features of a polyaza macrocycle, containing the diverse bipyridine unit 4,4′-(2,5,6,11,14-pentaaza[15]-[15](2,2′)-bipyridylophane (L3), with Co(II) and Cd(II) have been studied in aqueous solution and in the aprotic solvent dimethylsulfoxide (DMSO). The study was carried out at 298 K by means of potentiometric, spectrophotometric and calorimetric techniques. The formation of the dinuclear species M₂ L3 is observed for Co(II) both in water and in DMSO, whereas Cd(II) is able to form this type of dinuclear complex only in DMSO. The FT-IR spectra of the mononuclear species ML3, formed in both solvents, provide evidence that the rigid structure of the polyaminic chain prevents metal ions from being coordinated by all of the nitrogens of the macrocyclic cavity, in good agreement with the behavior suggested by the thermodynamic parameters. The results are compared with those for the complexation of Co(II) and Cd(II) with similar polyazamacrocycles containing a bipyridine unit directly inside the cavity. Semi-empirical calculations were also performed to obtain structural information.     

Self-assembly snapshots of a 2 × 2 copper(I) grid

Self-assembled 2 × 2 grids have been characterised as high-fidelity species produced when the correct stoichiometric ratios are met, but rarely are the individual steps leading to and from their formation characterised. Here, we present such a study using equilibrium-restricted factor analysis to model a set of UV–vis spectra starting from a bis-bidentate ligand to the assembly of a 2 × 2 grid complex upon titration with 1 equiv. of [Cu(MeCN)₄](PF₆) and to disassembly upon further titration. Intermediate species [CuL₂]⁺, [Cu₂L₃]²⁺, [Cu₃L₂]³⁺ and [Cu₂L]²⁺ are evidenced along the assembly and disassembly pathways. Complementary ¹H NMR titrations are consistent with the rich set of complexes and equilibria involved. Given the nature of the assembly process, the assembly is entropy driven and likely enthalpy driven as well. The disassembly process is both enthalpy and entropy driven according to the standard free energy values derived from the modelling of the spectrophotometric titration data.     

Volumetric Properties of Some Aliphatic Mono- and Dicarboxylic Acids in Water at 298.15 K

The apparent molar volumes, V _φ , of two series of homologous aliphatic carboxylic acids, H(CH₂) _n COOH [n=0–5] and (CH₂) _n (COOH)₂ [n=0–5], were determined in dilute aqueous solutions by density measurements at T=298.15 K. Densities were measured using a vibrating-tube densimeter (DMA 5000, Anton Paar, Austria) at T=298.15 K. These results were used to calculate the apparent molar volumes of each solute over the concentration range 0.0050≤m/(mol⋅kg⁻¹)≤0.3000. Values of the apparent molar volumes of undissociated acids V_f(u)⁰V_{\phi (u)}^{0} were also calculated. The variation of V_f(u)⁰V_{\phi (u)}^{0} was determined as a function of the aliphatic chain length of the studied carboxylic acids.     

Density and Viscosity of a Ternary $$ x_{1} $$ 1-He xene(1) + $$ x_{2} $$ x2 1-Octene(2) + (1 − − x2) 1-Decene(3) Mi xture at High Temperatures and High Pressures

The density and viscosity of a ternary 1-hexene(1) + 1-octene(2) +1-decene(3) mixture (\( w_{1} = w_{2} = w_{3} = 0.333 \) weight fractions or \( x_{1} = 0.4257 \),\( x_{2} = 0.3190 \), \( x_{3} = 0.2553 \) mole fractions of 1-hexene, 1-octene, and 1-decene, respectively) have been simultaneously measured over the temperature range from (298 to 471) K and at pressures up to 196 MPa using a combined method of hydrostatic weighing and falling-body techniques, respectively. The combined expanded uncertainties of the density, pressure, temperature, concentration, and viscosity measurements at the 95% confidence level with a coverage factor of k = 2 are estimated to be (0.15 to 0.30)%, 0.05%, 0.02 K, 0.005 mol%, and (1.5 to 2.0)%, respectively. The measured densities and viscosities were used to calculate the excess molar volumes and viscosity differences. The excess molar properties (\( G_{\text{m}}^{\text{E}} , \, H_{\text{m}}^{\text{E}} , \, S_{\text{m}}^{\text{E}} \) and \( C_{\text{pm}}^{\text{E}} \)) and their pressure derivatives as a function of temperature and pressure have been calculated using the derived excess molar volumes. The measured viscosities were used to develop a theoretically based viscosity correlation model (Arrhenius–Andrade type equation) for the mixture.     

Facile and Efficient Michael Addition of Indole to Nitroolefins Catalyzed by Zn(OAc)2 · 2H2O

The Zn(OAc)₂2H₂O-catalyed Michael addition reaction of indole to electron-deficient nitroolefins to afford the corresponding adducts in good to excellent yields with high selectivity is reported.     

Computation of quasiclassical trajectories by symplectic algorithm for the N(4S) + O2(X ^{3}\Sigma_{\rm g}^{-})\rightarrow NO(X2Π) + O(3P) reaction system

Computation of quasiclassical trajectories for the N(⁴S) + O₂(X $^{3}\Sigma_{\rm g}^{-})\!\rightarrow\!$  NO(X²Π)  + O(³P) atmospheric reaction system, based on a new ground potential energy surface reported by R.Sayós et al., has been performed in this work by means of both the fourth-order explicit symplectic algorithm (S4) and the fourth-order Runge–Kutta scheme (RK4), and then computed results of two schemes are compared. It is shown that RK4 cannot preserve energy conservation and symplectic structure of the reaction system, which results in the bad veracity of the trajectory calculation. RK4 cannot rightly reflect both the colliding mode and the reaction mode of the trajectories. Moreover, the amplitudes of vibration of the reactant molecule and the product molecule become gradually small with the time increasing, and their rotation–vibrational levels in fact vary during the integration. For these reasons, RK4 cannot assure the accuracy of the quasiclassical trajectory (QCT) study of the atmospheric reaction. However, S4 maintains these characteristics and can actually describe the circumstance of the reaction system. S4 is better than RK4 is prospective in the QCT study of the chemical reaction.     

Densities and Viscosities of Tris(acetylacetonato)cobalt(III) Complex Solutions in Various Solvents

The densities and the viscosities of tris(acetylacetonato)cobalt(III) solutions in acetonitrile, dichloromethane, chloroform, tetrachloromethane, benzene, toluene, ethylbenzene, and p-xylene were measured in the dilute concentration regions at several temperatures ranging from 278 to 313 K under ambient pressure. The partial molar volumes of the solvents and solute were calculated. They are independent of concentration and increase slightly as the temperature increases. The viscosity A- and B-coefficients of the Jones-Dole equation were obtained. The A-coefficients were found to be zero within experimental error. The B-coefficients are positive and decrease as the temperature increases. Thermodynamic quantities of activation for viscous flow were calculated on the basis of Eyring’s viscosity equation. From the quantities obtained in this study, along with some information from the literature, it is suggested that structure-making interactions occur between the segments of the complex and the solvent molecules. These interactions include electrostatic interactions between the local charge on the complex and the dipole moment of the solvent in solutions of acetonitrile and dichloromethane, interlocking packing interactions along C ₃-axis of the complex with solvent in solutions of chloroform and tetrachloromethane, and π-electron interactions between the chelate ring of the complex and the solvent in solutions of benzene, toluene, ethylbenzene, and p-xylene.     

Stability and Coordination Mode of Complexes of Polyphosphates and Polymetaphosphates with Copper(II) Ions in Aqueous Solution—Potentiometric,Spectral and Theoretical Studies

Complexes of copper(II) with a number of polyphosphate and polymetaphosphate anions have been studied in aqueous solutions by potentiometric, spectroscopic and theoretical methods. Stability constants of the complexes have been determined as well as their coordination modes. Results of the equilibrium studies provided evidence for the formation of ML, MHL and ML(OH) _x type complexes with the ligands studied. The length of the polyphosphate chain was found to affect the oxygen atom charge that is reflected in the stability constants of the ML type complexes. Moreover, the stability of the complex is also influenced by the spatial arrangement of the phosphate groups in phosphates and metaphosphates. The spectral parameters observed for certain complexes have permitted us to deduce the inner coordination sphere of the studied complexes.     

Study of the alternating current electrical properties of ZrO2–7.5 mol% Y2O3 ceramics at room temperature and at 457–595 K

The impedance of a ZrO₂–7.5 mol% Y₂O₃ ceramic specimen was measured using the two-probe technique in the frequency range 20 Hz–1 MHz at room temperature and in the temperature range 457–595 K. The novelty of the research lies in the analysis of the intragrain part of the impedance spectra of the ceramics on the basis of the approach proposed in the literature for impedance of ZrO₂–Y₂O₃ single crystals. The method to determine a value of the intragrain direct current electrical conductivity from an impedance spectrum has been developed. The frequency dependence of the intragrain complex dielectric response was interpreted according to the common model used in the literature. Frequency domains, where a power-law dependence having different exponents n ₁=0.825–0.844 and n ₂=0.571–0.592 is observed, were found. The inner consistency of the model used is verified. Values of the transition frequency and the relaxation frequency were determined for the grain interiors and compared with each other. The values of the activation energies of the direct current conductivity, the transition frequency and the relaxation frequency are found to be the same within experimental uncertainty in the temperature range 457–523 K. Electronic Publication     

Hetero-heptanuclear (Fe–Na) complexes of salicylaldehydes: crystal and molecular structure of [Fe2(3-OCH3-salo)8 · Νa5] · 3OH · 8H2Ο

The reaction of Fe(III) with the substituted salicylaldehydes [X-saloH, where X = 3-OCH₃ (L ¹ ), 5-CH₃ (L ² ), 5-Cl (L ³ ), 5-NO₂ (L ⁴ )] led to the formation of four new iron(III) hetero-heptanuclear complexes (Fe–Na) under the general formula [Fe₂(X-salo)₈Νa₅] · 3OH · zH₂Ο. The two different coordination modes of the ligand, as well as the geometry around the metal ions were deduced by X-ray structure analysis of compound 1, [Fe₂(3-OCH₃-salo)₈Νa₅] · 3OH · 8H₂Ο. The complexes have also been characterized by physicochemical and spectroscopic (IR, UV–Vis, Mössbauer) methods.     

Measurement of reaction cross-sections for 64Ni(n, γ) 65Ni at E n = 0.025 eV and 58Ni(n, p) 58Co at E n = 3.7 MeV

The reaction cross-sections for ⁶⁴Ni(n, γ) ⁶⁵Ni at E _n  = 0.025 eV and ⁵⁸Ni (n, p) ⁵⁸Co at E _n  = 3.7 MeV have been experimentally determined using activation and off-line γ-ray spectrometric technique. The thermal neutron flux used is from the thermal Column of the reactor APSARA at BARC, Mumbai, whereas the neutron energy of 3.7 MeV is from the ⁷Li(p, n) reaction at Pelletron facility, TIFR, Mumbai. The ⁶⁴Ni(n, γ) ⁶⁵Ni and ⁵⁸Ni(n, p) ⁵⁸Co reactions cross-sections from present work are compared with the available literature data and found to be in good agreement. The ⁵⁸Ni(n, p) ⁵⁸Co reaction as a function of neutron energy is also calculated theoretically using TALYS computer code version 1.2 and found to be higher than the experimental data.     

Activity Coefficients of Electrolytes from Liquid Membrane Cells. XII. Magnesium,Lanthanum, and Tris(ethylenediamine)cobalt(III) Salts of the 1,5-Naphthalenedisulfonate Anion at 298.15 K

Activity coefficients of the highly charged electrolytes Mgds, La₂ds₃, and [Co(en)₃]₂ds₃ (en = ethylenediamine, ds²⁻=1,5-naphthalenedisulfonate anion), were determined at 298.15 K using liquid-membrane cells. These salts are found not to display large negative deviations from the Debye-Hückel limiting slope in the dilute regions, which characterize the corresponding sulfate salts. Theoretical calculations based on the primitive model (charged hard spheres in an unstructured dielectric medium) reproduce the behavior of these salts correctly up to concentrations of 0.01 mol⋅kg⁻¹ or more (0.1 mol⋅kg⁻¹ for Mgds), although ds²⁻, far from resembling a charged sphere, is a planar ion with charges distant from one another. The Pitzer model parameter values are reported for the activity and osmotic coefficients.     

Spectral and Mechanistic Investigation of the Osmium(VIII) Catalyzed Oxidation of Diclofenac Sodium by the Copper(III) Periodate Complex in Aqueous Alkaline Medium

The kinetics of the osmium(VIII) (Os(VIII)) catalyzed oxidation of diclofenac sodium (DFS) by diperiodatocuprate(III) (DPC) in aqueous alkaline medium has been studied spectrophotometrically at a constant ionic strength of 1.0 mol⋅dm⁻³. The reaction showed first order kinetics in [Os(VIII)] and [DPC] and less than unit order with respect to [DFS] and [alkali]. The rate decreased with increase in [periodate]. The reaction between DFS and DPC in alkaline medium exhibits 1:2 [DFS]:[DPC] stoichiometry. However, the order in [DFS] and [OH⁻] changes from first order to zero order as their concentration increases. Changes in the ionic strength and dielectric constant did not affect the rate of reaction. The oxidation products were identified by LC-ESI-MS, NMR, and IR spectroscopic studies. A possible mechanism is proposed. The reaction constants involved in the different steps of the mechanism were calculated. The catalytic constant (K _C) was also calculated for Os(VIII) catalysis at the studied temperatures. From plots of log ₁₀ K _C versus 1/T, values of activation parameters have been evaluated with respect to the catalytic reaction. The activation parameters with respect to the slow step of the mechanism were computed and discussed, and thermodynamic quantities were also determined. The active osmium(VIII) and copper(III) periodate species have been identified.