Rhenium chemistry of azooximes: oxygen atom transfer, azoimine chelation, and imine-oxime contrast

The concerned azooximes (L1OH, 1) are of type p-X-C6H4C(N2Ph)(NOH) (X = H, Me, Cl). The reaction of [Re(MeCN)Cl3(PPh3)2] with [Ag(L1OH)(L1O)] in cold dichloromethane-acetonitrile solvent has furnished the green colored ionized azoimine complex [ReV(O)Cl(PPh3)2(L1)](PF6), 2. In effect L1O- has undergone oxidative addition, the oxygen atom being transferred to the metal site. Upon treatment of [ReV(NPh)Cl3(PPh3)2] with L1OH in solution, the neutral azoimine complex [ReV(NPh)Cl3(L1H)], 3, resulted due to the spontaneous transfer of the oxime oxygen atom to a PPh3 ligand, which is eliminated as OPPh3. In contrast, the oxime of 2-acetylpyridine (L2OH, 4) did not undergo oxygen atom transfer and simply afforded the imine-oxime complex [ReV(NC6H4Y)Cl2(PPh3)(L2O)], 5, upon reacting with [ReV(NC6H4Y)Cl3(PPh3)2] (Y = H, Me, Cl). The spectral and electrochemical properties of 2, 3, and 5 and the structures of three representative compounds are reported. In the cation of 2 (X = H) the two PPh3 ligands lie trans to each other and the equatorial plane is defined by the five-membered azoimine chelate ring and the oxo and chloro ligands. The oxo ligand which forms a model triple bond (Re-O length 1.616(6) A) lies cis to the imine-N atom. In 3 (X = Cl) the ReCl3 fragment has meridional geometry and the imido nitrogen lies trans to the imine nitrogen of the planar azoimine chelate ring. In 5 x H2O (Y = Me), the Cl, oximato-N, and P atoms define an equatorial plane and the pyridine-N lies trans to the imido-N. The water of crystallization is hydrogen bonded to the oximato oxygen atom (O...O, 2.829(5) A). Reaction models in which chelation of the azooxime precedes oxygen atom transfer are proposed on the basis of oxophilicity of trivalent rhenium, Lewis acid activity of pentavalent rhenium, electron withdrawal by the azo group, and observed relative disposition of ligands in products.     

Synthesis of cationic rhenium(VII) oxo imido complexes and their tunability towards oxygen atom transfer

A facile method is described for the synthesis of cationic Re(VII) cis oxo imido complexes of the form [Re(O)(NAr)(salpd)+] (salpd = N,N'-propane-1,3-diylbis(salicylideneimine)), 4, [Re(O)(NAr)(saldach)+] (saldach = N,N'-cyclohexane-1,3-diylbis(salicylideneimine)), 5, and [Re(O)(NAr)(hoz)2+] (hoz = 2-(2'-hydroxyphenyl)-2-oxazoline) (Ar = 2,4,6,-(Me)C(6)H(2); 4-(OMe)C(6)H(4); 4-(Me)C(6)H(4); 4-(CF3)C6H4; 4-MeC(6)H(4)SO(2)), 6, from the reaction of oxorhenium(V) [(L)Re(O)(Solv)+] (1-3) and aryl azides under ambient conditions. Unlike previously reported cationic Re(VII) dioxo complexes, these cationic oxo imido complexes can be obtained on a preparative scale, and an X-ray crystal structure of [Re(O)(NMes)(saldach)+], 5a, has been obtained. Despite the multiple stereoisomers that could arise from tetradentate ligation of salen ligands to rhenium, one major isomer is observed and isolated in each instant. The electronic rationalization for stereoselectivity is discussed. Investigation of the mechanism suggests that the reactions of Re(V) with aryl azides proceed through an azido adduct similar to the group 5 complexes of Bergman and Cummins. Treatment of the cationic oxo imido complexes with a reductant (PAr(3), PhSMe, or PhSH) results in oxygen atom transfer (OAT) and the formation of cationic Re(V) imido complexes. [(salpd)Re(NMes)(PPh(3))(+)] (7) and [(hoz)2Re(NAr)(PPh(3))(+)] (Ar = m-OMe phenyl) (9) have been isolated on a preparative scale and fully characterized including an X-ray single-crystal structure of 7. The kinetics of OAT, monitored by stopped-flow spectroscopy, has revealed rate saturation for substrate dependences. The different plateau values for different oxygen acceptors (Y) provide direct support for a previously suggested mechanism in which the reductant forms a prior-equilibrium adduct with the rhenium oxo (ReVII = O<--Y). The second-order rate constants of OAT, which span more than 3 orders of magnitude for a given substrate, are significantly affected by the electronics of the imido ancillary ligand with electron-withdrawing imidos being most effective. However, the rate constant for the most active oxo imido rhenium(VII) is 2 orders of magnitude slower than that observed for the known cationic dioxo Re(VII) [(hoz)2Re(O)(2)(+)].     

Mechanistic insight into hydrosilylation reactions catalyzed by high valent ReX (X = O, NAr, or N) complexes: the silane (Si-H) does not add across the metal-ligand multiple bond

Treatment of oxo and imido-rhenium(V) complexes Re(X)Cl3(PR3)2 (X = O, NAr, and R = Ph or Cy) (1-2) with Et3SiH affords Re(X)Cl2(H)(PR3)2 in high yields. Cycloaddition of silane across the ReX multiple bonds is not observed. Two rhenium(V) hydrides (X = O and R = Ph, 4a; X = NMes and R = Ph, 5a) have been structurally characterized by X-ray diffraction. The kinetics of the reaction of Re(O)Cl3(PPh3)2 (1a) with Et3SiH is characterized by phosphine inhibition and saturation in [Et3SiH]. Hence, formation of Re(O)Cl2(H)(PPh3)2 (4a) proceeds via a sigma-adduct followed by heterolytic cleavage of the Si-H bond and transfer of silylium (Et3Si+) to chloride. Oxo and imido complexes of rhenium(V) (1-2) as well as their nitrido analogues, Re(N)Cl2(PR3)2 (3), catalyze the hydrosilylation of PhCHO under ambient conditions, with the reactivity order imido > oxo > nitrido. The isolable oxorhenium(V) hydride 4a reacts with PhCHO to afford the alkoxide Re(O)Cl2(OCH2Ph)(PPh3)2 (6a) with kinetic dependencies that are consistent with aldehyde coordination followed by aldehyde insertion into the Re-H bond. The latter (6a) regenerates the rhenium hydride upon reaction with Et3SiH. These stoichiometric reactions furnish a possible catalytic cycle. However, quantitative kinetic analysis of the individual stoichiometric steps and their comparison to steady-state kinetics of the catalytic reaction reveal that the observed intermediates do not account for the predominant catalytic pathway. Furthermore, for Re(O)Cl2(H)(PCy3)2 and Re(NMes)Cl2(H)(PPh3)2 aldehyde insertion into the Re-H bond is not observed. Therefore, based on the kinetic dependencies under catalytic conditions, a consensus catalytic pathway is put forth in which silane is activated via sigma-adduct formation cis to the ReX bond followed by heterolytic cleavage at the electrophilic rhenium center. The findings presented here demonstrate the so-called Halpern axiom, the observation of "likely" intermediates in a catalytic cycle, generally, signals a nonproductive pathway.     

Chelated hydrazido(3-)rhenium(V) complexes: on the way to the nitrido-M(V) core (M = Tc, Re)

Neutral and asymmetrical hydrazido(3-)rhenium(V) heterocomplexes of the type [Re(eta(2)-L(4))(L(n))(PPh(3))] (eta(2)-L(4) = NNC(SCH(3))S; H(2)L(1) = S-methyl beta-N-((2-hydroxyphenyl)ethylidene)dithiocarbazate, 1, H(2)L(2) = S-methyl beta-N-((2-hydroxyphenyl)methylidene)dithiocarbazate, 2) are prepared via ligand-exchange reactions in ethanolic solutions starting from [Re(V)(O)Cl(4)](-) in the presence of PPh(3) or from [Re(V)(O)Cl(3)(PPh(3))(2)]. The distorted octahedral coordination sphere of these compounds is saturated by a chelated hydrazido group, a facially ligated ONS Schiff base, and PPh(3). Reduction-substitution reactions starting from [NH(4)][Re(VII)O(4)] in acidic ethanolic mixtures containing PPh(3) and H(2)L(n) (or its dithiocarbazic acid precursor H(3)L(4)) produce another example of chelated hydrazido(3-) rhenium(V) derivative, namely [Re(eta(2)-L(4))Cl(2)(PPh(3))(2)], 3. On the contrary, the N-methyl-substituted dithiocarbazic acid H(2)L(3) reacts with perrhenate to give the known nitrido complex [Re(N)Cl(2)(PPh(3))(2)]. Rhenium(V) complexes incorporating the robust eta(2)-hydrazido moiety represent key intermediates helpful for the comprehension of the reaction pathway which generates nitridorhenium(V) species starting from oxo precursors. An essential requirement for the stabilization of such chelated hydrazido-Re(V) units is the triple deprotonation at the hydrazine nitrogens, thereby providing efficient pi-electron circulation in the resulting five-membered ring. The thermal stability of these units is affected by the nature of the anchoring donor, thione sulfur ensuring stronger chelation than nitrogen and oxygen. The eta(2)-hydrazido complexes are characterized by conventional physicochemical techniques, including the X-ray crystal structure determination of 1 and 3.     

Selective Oxygen Transfers with Iron(III) Porphyrin Nitrite

The reaction of octaethylporphyrin iron(III) chloride with potassium crown ether (18-crown-6) nitrite in N-methylpyrrolidone-1% acetic acid under argon generates the iron(III) nitrite salt (PFeNO(2)). The latter is a unique and selective oxygen atom transfer reagent. The reaction of a broad range of substrates (S) proceeds quantitatively to yield the oxidized substrate and the iron(II) porphyrin-nitrosyl adduct: PFeNO(2) + S --> PFeNO + SO. Diatomic molecules to which oxygen is directly transferred from PFeNO(2) are NO, CO, and O(2). The conversion NO to NO(2) is shown via (15)NO(2)(-) labeling experiments to proceed exclusively by the O atom transfer process. The ozone, generated from dioxygen, was trapped with nitrite ion and the two olefins 2-methyl-2 butene and 2,3-dimethyl-2 butene. These substances are inert to PFeNO(2) under argon. However, in an oxygen-saturated reaction mixture, nitrite produced nitrate. The olefins, following reduction of the reaction mixture with Zn/HOAc, yielded 1 mol of acetone and acetaldehyde and 2 mol of acetone, respectively. Other simple O atom transfers under argon were observed with dimethyl sulfide and triphenylphosphine. The PFeNO(2) reagent shows a preference for O insertion into allylic, benzylic, and aldehydic C-H bonds. Thus, no olefin containing these moieties is epoxidized. However, styrene and cis-stilbene are converted to styrene oxide and cis-stilbene oxide, respectively. The double oxidation of allylbenzene to trans-cinnamaldehyde entails an allylic rearrangement that suggests radical character to the O insertion process. However, no kinetic evidence for this was obtained. The reaction is an overall third-order process, rate = k(PFe(III))(NO(2)(-))(S). There was no correlation of observed rates with relevant C-H bond dissociation energies of substrates. The fastest reacting substrate was nitric oxide (k(22) degrees = 52 M(-)(2) s(-)(1)) and the slowest was toluene (k(50) degrees = 6.3 x 10(-)(4) M(-)(2) s(-)(1)). The range and selectivity of these O atom transfers sets them apart from the catalytic oxidations brought about by reactions of iron(III) porphyrins with peroxides, iodosoaryls, hypochlorite, and other oxidants. The driving force for the relatively mild oxidations with PFeNO(2) resides in the thermodynamic stability of the heme-NO adduct. Given the broad presence of nitrite in the environment and the ubiquity of porphyrins in the biosphere, the activation of nitrite by iron porphyrins has both an environmental and biochemical significance.     

Efficient catalytic conversion of pyridine N-oxides to pyridine with an Oxorhenium(V) catalyst

The compound CH(3)Re(O)(SR)(2)PPh(3), where (SR)(2) represents the dianion of 2-(mercaptomethyl)thiophenol, catalyzes the rapid and efficient transfer of an oxygen atom from a wide range of ring-substituted pyridine N-oxides to triphenylphosphine, yielding the pyridines in high yield.     

Rhenium complexes with triazine derivatives formed from semicarbazones and thiosemicarbazones

Benzil bis(semicarbazone), H2L(1), reacts with common rhenium(V) nitrido complexes such as [ReNCl2(PPh3)2] or [ReNCl2(PR2Ph)3] (R = Me, Et) under the release of one semicarbazone unit, cyclization, and formation of stable triazine-3-onato complexes of rhenium(V). The resulting 5,6-diphenyltriazine-3-one, HL (2), acts as monodentate or chelating, monoanionic ligand depending on the reaction conditions applied. Complexes of the compositions [ReNCl(L(2)-kappaN(2),kappaO)(PR2Ph)2] (R = Me, Et) or [ReN(L(2)-kappa N(2),O)(L(2)-kappaN(2))(PPh3)2] were isolated. The N(2) nitrogen atom is the preferred binding site of the monodentate form of the ligand. This contrasts the behavior of the analogous thione HL(3), which preferably coordinates to nitridorhenium(V) centers via the sulfur atom. HL(3) is readily formed by the abstraction of methanol from 5-methoxy-5,6-diphenyl-4,5-dihydro-2H-[1,2,4]triazine-3-thione, H2L(3)OCH 3. In the presence of [ReNCl2(PPh3)2] or [ReNCl2(PR2Ph)3] complexes (R = Me, Et), this reaction yields stable complexes of the composition [ReN(L(3)-kappaN(2),kappaS)(L(3)-kappaS)(PR2Ph)2] (R = Me, Et, Ph) in good yields. Reduction of the metal atom and formation of the seven-coordinate [Re(PPh3)(L(3)-kappaN(2),kappaS)3] was observed during reactions of H2L(3)OCH3 with [ReOCl3(PPh3)2] or [ReO2I(PPh3)2], while no rhenium complexes could be isolated during similar reactions with H2L(1), although cyclization of the bis(semicarbazone) and the formation of H 2L(2)OEt were observed.     

Photoexcitation in Cu(I) and Re(I) complexes containing substituted dipyrido[3,2-a:2',3'-c]phenazine: a spectroscopic and density functional theoretical study

Copper(I) and rhenium(I) complexes [Cu(PPh(3))(2)(dppz-11-COOEt)]BF(4), [Cu(PPh(3))(2)(dppz-11-Br)]BF(4), [Re(CO)(3)Cl(dppz-11-COOEt)] and [Re(CO)(3)Cl(dppz-11-Br)] (dppz-11-COOEt = dipyrido-[3,2a:2',3'c]phenazine-11-carboxylic ethyl ester, dppz-11-Br = 11-bromo-dipyrido[3,2a:2',3'c]-phenazine) have been studied using Raman, resonance Raman, and transient resonance Raman (TR(2)) spectroscopy, in conjunction with computational chemistry. DFT (B3LYP) frequency calculations with a 6-31G(d) basis set for the ligands and copper(I) centers and an effective core potential (LANL2DZ) for rhenium in the rhenium(I) complexes show close agreement with the experimental nonresonance Raman spectra. Modes that are phenazine-based, phenanthroline-based, and delocalized across the entire ligand structure were identified. The nature of the absorbing chromophores at 356 nm for ligands and complexes was established using resonance Raman spectroscopy in concert with vibrational assignments from calculations. This analysis reveals that the dominant chromophore for the complexes measured at 356 nm is ligand-centered (LC), except for [Re(CO)(3)Cl(dppz-11-Br)], which appears to have additional chromophores at this wavelength. Calculations on the reduced complexes, undertaken to model the metal-to-ligand charge transfer (MLCT) excited state, show that the reducing electron occupies a ligand MO that is delocalized across the ligand structure. Resonance Raman spectra (lambda(exc) = 514.5 nm) of the reduced rhenium complexes show a similar spectral pattern to that observed in [Re(CO)(3)Cl(dppz)](*-); the measured bands are therefore attributed to ligand radical anion modes. These bands lie at 1583-1593 cm(-1) for [Re(CO)(3)Cl(dppz-11-COOEt)] and 1611 cm(-1) for [Re(CO)(3)Cl(dppz-11-Br)]. The thermally equilibrated excited states are examined using nanosecond-TR(2) spectroscopy (lambda(exc) = 354.7 nm). The TR(2) spectra of the ligands provide spectral signatures for the (3)LC state. A band at 1382 cm(-1) is identified as a marker for the (3)LC states of both ligands. TR(2) spectra of the copper and rhenium complexes of dppz-11-Br show this (3)LC band, but it is not prominent in the spectra of [Cu(PPh(3))(2)(dppz-11-COOEt)](+) and [Re(CO)(3)Cl(dppz-11-COOEt)]. Calculations suggest that the lowest triplet states of both of the rhenium(I) complexes and [Cu(PPh(3))(2)(dppz-11-Br)](+) are metal-to-ligand charge transfer in nature, but the lowest triplet state of [Cu(PPh(3))(2)(dppz-11-COOEt)](+) appears to be LC in character.     

Rhenium and technetium complexes with N,N-dialkyl-N'-benzoylthioureas

N,N-Dialkyl-N'-benzoylthioureas, HR(1)R(2)btu, react under single deprotonation and form air-stable chelate complexes with common rhenium or technetium complexes such as (NBu(4))[MOCl(4)] (M = Re, Tc) or [ReOCl(3)(PPh(3))(2)]. Compositions and molecular structures of the products are strongly dependent on the precursors used and the reaction conditions applied. Reactions with [ReOCl(3)(PPh(3))(2)] in CH(2)Cl(2) give complexes of the general formula [ReOCl(2)(R(1)R(2)btu)(PPh(3))] (3), with the benzoyl oxygen atom of the chelating benzoylthiourea being trans to the oxo ligand, and/or Re(III) complexes of the composition [ReCl(2)(R(1)R(2)btu)(PPh(3))(2)] (4) with the PPh(3) ligands in trans positions to each other. In polar solvents such as MeOH, EtOH or acetone, corresponding reactions without addition of a supporting base only result in intractable brown solutions, from which no crystalline complexes could be isolated. The addition of NEt(3), however, allows the isolation of the bis-chelates [ReOCl(R(1)R(2)btu)(2)] (1) in good yields. In this type of complex, one of the chelating R(1)R(2)btu- ligands coordinates equatorially, while the second occupies the position trans to the oxo ligand with its oxygen atom. The latter compounds can also be prepared from (NBu(4))[ReOCl(4)] in MeOH when no base is added, while the addition of NEt(3) results in the formation of [ReO(OMe)(R(1)R(2)btu)(2)] (5) complexes with the methoxo ligand trans to O(2-). Compounds of the type 5 can alternatively be prepared by heating 1 in MeOH with addition of NEt(3). A reversible conversion of 5 into oxo-bridged dimers of the composition [{ReO(R(1)R(1)btu)(2)}(2)O] (6) is observed in water-containing solvents. Starting from (NBu(4))[TcOCl(4)], a series of technetium complexes of the type [TcOCl(R(1)R(2)btu)(2)] (2) could be prepared. The structures of such compounds are similar to those of the rhenium analogues 1. Reduction of 2 with PPh(3) in CH(2)Cl(2) gives Tc(III) complexes of the composition [TcCl(R(1)R(2)btu)(2)(PPh(3))] (7) having the chloro and PPh(3) ligands in cis positions. When this reaction is performed in the presence of excess chelating ligand, the Tc(III) tris-chelates [Tc(R(1)R(2)btu)(3)] (8) are formed.     

Pyridylazole chelation of oxorhenium(V) and imidorhenium(V). Rates and trends of oxygen atom transfer from Re(V)O to tertiary phosphines

The concerned azoles are 2-(2-pyridyl)benzoxazole (pbo) and 2-(2-pyridyl)benzthiazole (pbt). These react with ReOCl(3)(PPh(3))(2) in benzene, affording Re(V)OCl(3)(pbo) and Re(V)OCl(3)(pbt), which undergo facile oxygen atom transfer to PPh(2)R (R = Ph, Me) in dichloromethane solution, furnishing Re(III)(OPPh(2)R)Cl(3)(pbo) and Re(III)(OPPh(2)R)Cl(3)(pbt). The oxo species react with aniline in toluene solution, yielding the imido complexes Re(V)(NPh)Cl(3)(pbo) and Re(V)(NPh)Cl(3)(pbt). The X-ray structures of pbt, ReOCl(3)(pbt), Re(OPPh(3))Cl(3)(pbt), and Re(NPh)Cl(3)(pbo) are reported. The lattice of pbt consists of stacked dimers. In all the complexes the azole ligand is N,N-chelated and the ReCl(3) moiety is meridionally disposed. In ReOCl(3)(pbt) the metal-oxo bond length is 1.607(9) A. The second-order rates and the associated activation parameters of the oxygen atom transfer reactions of the Re(V)O chelates with PPh(2)R are reported. The large and negative entropy of activation (approximately -24 eu) is consistent with an associative pathway involving nucleophilic phosphine attack. The rate increases with phosphine basicity (PPh(2)Me > PPh(3)) and azole heteroatom electronegativity (O(pbo) > S(pbt)). Logarithmic rate constants for ReOCl(3)(pbo), ReOCl(3)(pbt), and ReOCl(3)(pal) are found to correlate linearly with Re(VI)O/Re(V)O reduction potentials (pal is pyridine-2-(N-p-tolyl)aldimine). The relatively low rate constant of ReOCl(3)(pbt) compared to that of ReOCl(3)(pal) is consistent with the observed shortness of the metal-oxo bond in the former. Crystal data are as follows: (pbt) empirical formula C(12)H(8)N(2)S, crystal system orthorhombic, space group Pca2(1), a = 13.762(9) A, b = 12.952(8) A, c = 11.077(4) A, V = 1974(2) A(3), Z = 8; (ReOCl(3)(pbt)) empirical formula C(12)H(8)Cl(3)N(2)OSRe, crystal system monoclinic, space group P2(1)/c, a = 11.174(7) A, b = 16.403(10) A, c = 7.751(2) A, beta = 99.35(4) degrees, V = 1401.8(13) A(3), Z = 4; (Re(NPh)Cl(3)(pbo)) empirical formula C(18)H(13)Cl(3)N(3)ORe, crystal system monoclinic, space group P2(1)/c, a = 9.566(6) A, b = 16.082(8) A, c = 11.841(5) A, beta = 94.03(4) degrees, V = 1817(2) A(3), Z = 4.     

Kinetic isotope effects in cycloreversion of rhenium (V) diolates

Cycloreversion of 4-methoxystyrene from the corresponding Tp'Re(O)(diolato) complex (Tp' = hydrido-tris-(3,5-dimethylpyrazolyl)borate) was measured competitively for various isotopomers at 103 degrees C. Primary ((12)C/(13)C) and secondary ((1)H/(2)H) kinetic isotope effects were determined. The primary KIEs were k(12C)/k(13C) = 1.041 +/- 0.005 at the alpha position and 1.013 +/- 0.006 at the beta position. Secondary KIEs were k(H)/k(D) = 1.076 +/- 0.005 at the alpha position and 1.017 +/- 0.005 at the beta position. Computational modeling (B3LYP/LACVP+) located a transition state for concerted cycloreversion of styrene from TpRe(O)(OCH(2)CHPh) exhibiting dramatically different C-O bond lengths. A Hammett study on cycloreversions of substituted styrenes from a series of Tp'Re(O)(diolato) showed dichotomous behavior for electron donors and electron-withdrawing groups as substituents: rho = -0.65 for electron donors, but rho = +1.13 for electron-withdrawing groups. The data are considered in light of various mechanistic proposals. While the extrusion of 4-methoxystyrene is concluded to be a highly asynchronous concerted reaction, the Hammett study reflects a likelihood that multiple reaction mechanisms are involved.     

Hydrogenation studies involving halobis(phosphine)-rhodium(I) dimers: use of parahydrogen induced polarisation to detect species present at low concentration

Reaction of [RhCl(PPh3)2]2 with parahydrogen revealed that the binuclear dihydride [Rh(H)2(PPh3)2mu-Cl)2Rh(PPh3)2] and the tetrahydride complex [Rh(H)2(PPh3)2(mu-Cl)]2 are readily formed. While magnetisation transfer from free H2 into both the hydride resonances of the tetrahydride and [Rh(H)2Cl(PPh3)3] is observable, neither transfer into [Rh(H)2(PPh3)2(mu-Cl)2Rh(PPh3)2] nor transfer between the two binuclear complexes is seen. Consequently [Rh(H)2(PPh3)2(mu-Cl)]2 and [Rh(H)2(PPh3)2(mu-Cl)2Rh(PPh3)2] are not connected on the NMR timescale by simple elimination or addition of H2. The rapid exchange of free H2 into the tetrahydride proceeds via reversible halide bridge rupture and the formation of [Rh(H)2(PPh3)2(mu-Cl)RhCl(H)2(PPh3)2]. When these reactions are examined in CD2Cl2, the formation of the solvent complex [Rh(H)2(PPh3)2(mu-Cl)2Rh(CD2Cl2)(PPh3)] and the deactivation products [Rh(Cl)(H)PPh3)2(mu-Cl)(mu-H)Rh(Cl)(H)PPh3)2] and [Rh(Cl)(H)(CD2Cl2)(PPh3)(mu-Cl)(mu-H)Rh(Cl)(H)PPh3)2] is indicated. In the presence of an alkene and parahydrogen, signals corresponding to binuclear complexes of the type [Rh(H)2(PPh3)2(mu-Cl)(2)(Rh)(PPh3)(alkene)] are detected. These complexes undergo intramolecular hydride interchange in a process that is independent of the concentration of styrene and catalyst and involves halide bridge rupture, followed by rotation about the remaining Rh-Cl bridge, and bridge re-establishment. This process is facilitated by electron rich alkenes. Magnetisation transfer from the hydride ligands of these complexes into the alkyl group of the hydrogenation product is also observed. Hydrogenation is proposed to proceed via binuclear complex fragmentation and trapping of the resultant intermediate [RhCl(H)2PPh3)2] by the alkene. Studies on a number of other binuclear dihydride complexes including [(H)(Cl)Rh(PMe3)2(mu-H)(mu-Cl)Rh(CO)(PMe3)], [(H)2Rh(PMe3)2(mu-Cl)2Rh(CO)(PMe3)] and [HRh(PMe3)2(mu-H)(mu-Cl)2Rh(CO)(PMe3)] reveal that such species are able to play a similar role in hydrogenation catalysis. When the analogous iodide complexes [RhIPPh3)2]2 and [RhI(PPh3)3] are examined, [Rh(H)2(PPh3)2(mu-I)2Rh(PPh3)2], [Rh(H)2(PPh3)2(mu-I)]2 and [Rh(H)2I(PPh3)3] are observed in addition to the corresponding binuclear alkene-dihydride products. The higher initial activity of these precursors is offset by the formation of the trirhodium phosphide bridged deactivation product, [[(H)(PPh3)Rh(mu-H)(mu-I)(mu-PPh2)Rh(H)(PPh3)](mu-I)2Rh(H)2PPh3)2]     

Protic conversion of nitrile into azavinylidene complexes of rhenium, a mechanistic theoretical study

The mechanism of the protonation of the rhenium nitrile chloro-complexes [ReCl(NCCH3)(PH3)4] (2), taken as models of the real systems [ReCl(NCR)(dppe)(2)] (dppe = Ph2PCH2CH2PPh2), leading to the azavinylidene products [ReCl(NC(H)CH3)(PH3)4]+ (3) was investigated by theoretical methods at the B3LYP level of theory. Electrostatic and molecular orbital arguments and thermodynamic, kinetic, and steric factors are analyzed and indicate that the chlorine atom is the most probable site of the initial proton attack, although the direct protonation of the nitrile carbon atom is also possible as a concurrent process. For the cis-isomer of 2, the initially formed chloro-protonated species cis-[Re(ClH)(NCCH3)(PH3)4]+ further converts to the azavinylidene cis-3 via either an acid-independent 1,4-proton shift or an acid-base catalyzed pathway involving a second protonation of the nitrile carbon atom to give cis-[Re(ClH)(NC(H)CH3)(PH3)4]2+ followed by elimination of the proton from the chlorine atom.     

New approaches to high-activity transition-metal catalysts for carbon-carbon bond forming reactions. Rhenium-containing phosphorus donor ligands for palladium-catalyzed Suzuki cross-couplings

The rhenium complexes (eta 5-C5H5)Re(NO)(PPh3)((CH2)nPR2:) (n/R = 0/Ph, 0/t-Bu, 0/Me, 1/Ph, 1/t-Bu), which contain electron-rich and sterically congested phosphido moieties, give active catalysts for the title reaction; typical conditions (toluene, 60-100 degrees C): aryl bromide (1.0 equiv.), PhB(OH)2 (1.5 equiv.), K3PO4 (2.0 equiv.), Pd(OAc)2 (1 mol%), and a Re(CH2)nPR2: species or a 1:2 [Re(CH2)nPR2H]+X-/t-BuOK mixture (4 mol% rhenium).     

Scope and limitations of montmorillonite K 10 catalysed opening of epoxide rings by amines

Montmorillonite K 10 efficiently catalyses the opening of epoxide rings by amines in high yields with excellent regio- and diastereo-selectivities under solvent-free conditions at room temperature affording an improved process for synthesis of 2-amino alcohols. Reaction of cyclohexene oxide with aryl/alkyl amines leads to the formation of trans-2-aryl/alkylaminocyclohexanols. For unsymmetrical epoxides, the regioselectivity is controlled by the electronic and steric factors associated with the epoxide and the amine. Selective nucleophilic attack at the benzylic carbon of styrene oxide takes place with aromatic amines, whereas, aliphatic amines exhibit preferential nucleophilic attack at the terminal carbon. Aniline reacts selectively at the less hindered carbon of other unsymmetrical epoxides. The difference in the internal strain energy of the epoxide ring in cycloalkene oxides and alkene oxides led to selective nucleophilic opening of cyclohexene oxide by aniline in the presence of styrene oxide. Due to the chelation effect, selective activation of the epoxide ring in 3-phenoxy propylene oxide takes place in the presence of styrene oxide leading to preferential cleavage of the epoxide ring in 3-phenoxy propylene oxide by aniline.     

Kinetics and mechanisms of catalytic oxygen atom transfer with oxorhenium(V) oxazoline complexes

The rhenium(V) monooxo complexes (hoz)2Re(O)Cl (1) and [(hoz)2Re(O)(OH2)][OTf] (2) have been synthesized and fully characterized (hoz = 2-(2'-hydroxyphenyl)-2-oxazoline). A single-crystal X-ray structure of 2 has been solved: space group = P1, a = 13.61(2) A, b = 14.76(2) A, c = 11.871(14) A, alpha = 93.69(4) degrees, beta = 99.43(4) degrees, gamma = 108.44(4) degrees, Z = 4; the structure was refined to final residuals R = 0.0455 and Rw = 0.1055. 1 and 2 catalyze oxygen atom transfer from aryl sulfoxides to alkyl sulfides and oxygen-scrambling between sulfoxides to yield sulfone and sulfide. Superior catalytic activity has been observed for 2 due to the availability of a coordination site on the rhenium. The active form of the catalyst is a dioxo rhenium(VII) intermediate, [Re(O)2(hoz)2]+ (3). In the presence of sulfide, 3 is rapidly reduced to [Re(O)(hoz)2]+ with sulfoxide as the sole organic product. The transition state is very sensitive to electronic influences. A Hammett correlation plot with para-substituted thioanisole derivatives gave a reaction constant rho of -4.6 +/- 0.4, in agreement with an electrophilic oxygen transfer from rhenium. The catalytic reaction features inhibition by sulfides at high concentrations. The equilibrium constants for sulfide binding to complex 2 (cause of inhibition), K2 (L x mol(-1)), were determined for a few sulfides: Me2S (22 +/- 3), Et2S (14 +/- 2), and tBu2S (8 +/- 2). Thermodynamic data, obtained from equilibrium measurements in solution, show that the S=O bond in alkyl sulfoxides is stronger than in aryl sulfoxides. The Re=O bond strength in 3 was estimated to be about 20 kcal x mol(-1). The high activity and oxygen electrophilicity of complex 3 are discussed and related to analogous molybdenum systems.     

Photochemical synthesis and reactivity studies of dirhenacarboranes

Ultraviolet irradiation of [PPh(4)][closo-1-CB(8)H(9)] with [Re(2)(CO)(10)] in THF (tetrahydrofuran) at ambient temperature affords the dirhenacarborane anion [6,10-{Re(CO)(4)}-10-(micro-H)-6,6,6-(CO)(3)-closo-6,1-ReCB(8)H(8)]-, isolated as its [PPh(4)]+ salt (1). Further irradiation of 1 yields a second isomeric anion [6,10-{Re(CO)(4)}-6-(micro-H)-10,10,10-(CO)(3)-closo-10,1-ReCB(8)H(8)]- that was characterized as a [N(PPh(3))(2)]+ salt (2). Reaction of 1 with NOBF(4) produces the neutral dirhenacarborane compound [8,10-{Re(CO)(4)}-8,10-(micro-H)2-6,6-(CO)(2)-6-NO-closo-6,1-ReCB(8)H(7)] (3). Compounds 1-3 all consist of a central {closo-ReCB(8)} cluster with a second rhenium center which is exo-polyhedral. Attempts to substitute the carbonyl ligands of 3 with other donor ligands such as phosphines, isocyanides, or alkynes resulted in loss of the exo-polyhedral rhenium moiety and formation of a monorhenium anion, [6,6-(CO)(2)-6-NO-closo-6,1-ReCB(8)H(9)]-, isolated as its [N(PPh(3))(2)]+ salt (4). The heterometallic dimetallacarborane species, [6,7,10-{Cu(PPh(3))}-7,10-(micro-H)2-6,6-(CO)(2)-6-NO-closo-6,1-ReCB(8)H(7)] (5) and [6,7-{Au(PPh(3))}-7-(micro-H)-6,6-(CO)(2)-6-NO-closo-6,1-ReCB(8)H(8)] (6) were formed from reactions of 4 with {Cu(PPh(3))}+ and {Au(PPh(3))}+, respectively. Similarly, reaction of 4 with {Ir(CO)(PPh(3))(2)}+ afforded two products, [6,10-{Ir(micro-PPh(2))(Ph)(CO)(PPh(3))}-10-(micro-H)-6-CO-6-NO-closo-6,1-ReCB(8)H(8)] (7) and [6,9,10-{Ir(micro-PPh(2))(H)(PPh(3))}-9-(micro-H)-6-CO-6-NO-10-Ph-closo-6,1-ReCB(8)H(8)] (8). The solid-state structures of compounds 1-8 were all unequivocally established by single-crystal X-ray diffraction experiments.     

A novel series of rhenium-bipyrimidine complexes: synthesis, crystal structure and electrochemical properties

Four novel rhenium complexes of formula [ReCl(4)(bpym)] (1), [ReBr(4)(bpym)] (2) PPh(4)[ReCl(4)(bpym)] (3) and NBu(4)[ReBr(4)(bpym)] (4) (bpym = 2,2'-bipyrimidine, PPh(4) = tetraphenylphosphonium cation and NBu(4) = tetrabutylammonium cation), have been synthesized and their crystal structures determined by single-crystal X-ray diffraction. The structures of 1 and 2 consist of [ReX(4)(bpym)] molecules held together by van der Waals forces. In both complexes the Re(iv) central atom is surrounded by four halide anions and two nitrogen atoms of a bpym bidentate ligand in a distorted octahedral environment. The structures of 3 and 4 consist of [ReX(4)(bpym)](-) anions and PPh(4)(+) () or NBu(4)(+) (4) cations. The coordination sphere of the Re(iii) metal ion is the same as in 1 and 2, respectively. However, whereas the Re-X bonds are longer the Re-N bonds are shorter than in 1 and 2. This fact reveals that the bpym ligand forms a stronger bond with Re(iii) than with Re(iv) resulting in a stabilisation of the lower oxidation state. [ReX(4)(bpym)] complexes are easily reduced, chemically and electrochemically, to the corresponding [ReX(4)(bpym)](-) anions. A voltammetric study shows that the electron transference is a reversible process characterized by formal redox potentials of +0.19 V (1) and +0.32 V (2) vs. NHE, in acetonitrile as solvent.     

Cluster core controlled reactions of substitution of terminal bromide ligands by triphenylphosphine in octahedral rhenium chalcobromide complexes

Reactions of rhenium chalcobromides Cs4[{Re6(mu3-S)8}Br6].2H2O, Cs3[{Re6(mu3-Se)8}Br6].2H2O, Cs3[{Re6(mu3-Q)7(mu3-Br)}Br6].H2O (Q = S, Se), and K2[{Re6(mu3-S)6(mu3-Br)2}Br6] with molten triphenylphosphine (PPh3) have resulted in a family of novel molecular hybrid inorganic-organic cluster compounds. Six octahedral rhenium cluster complexes containing PPh3 ligands with general formula [{Re6(mu3-Q)8-n(mu3-Br)n}(PPh3)4-nBrn+2] (Q = S, n = 0, 1, 2; Q = Se, n = 0, 1) have been synthesized and characterized by X-ray single-crystal diffraction and elemental analyses, 31P{1H} NMR, luminescent measurements, and quantum-chemical calculations. It was found that the number of terminal PPh3 ligands in the complexes is controlled by the composition and consequently by the charge of the cluster core {Re6Q8-nBrn}n+2. In crystal structures of the complexes with mixed chalcogen/bromine ligands in the cluster core all positions of a cube [Q8-nBrn] are ordered and occupied exclusively by Q or Br atoms. Luminescence characteristics of the compounds trans-[{Re6Q8}(PPh3)4Br2] and fac-[{Re6Se7Br}(PPh3)3Br3] (Q = S, Se) have been investigated in CH2Cl2 solution and the broad emission spectra in the range of 600-850 nm were observed.     

Systematic synthesis, isolation, and photophysical properties of linear-shaped Re(I) oligomers and polymers with 2-20 units

Systematic synthesis routes have been developed for the linear-shaped rhenium(I) oligomers and polymers bridged with bidentate phosphorus ligands, [Re(N--N)(CO)3-PP-{Re(N--N)(CO)2-PP-}(n)Re(N--N)(CO)3](PF6)(n+2) (N--N = diimine, PP = bidentate phosphine, n = 0-18). These were isolated by size exclusion chromatography (SEC) and identified by (1)H NMR, IR, electrospray ionization Fourier transform mass spectrometry, analytical SEC, and elemental analysis. Crystal structures of [Re(bpy)(CO)3-Ph2PC[triple bond]CPPh2-Re(bpy)(CO)3](PF6)2, [Re(bpy)(CO)3-Ph2PC[triple bond]CPPh2-Re(bpy)(CO)2-Ph2PC[triple bond]CPPh2-Re(bpy)(CO)3](PF6)3 and [Re(bpy)(CO)3-Ph2PC2H4PPh2-{Re(bpy)(CO)2Ph2PC2H4PPh2-}(n)Re(bpy)(CO)3](PF6)(n+2) (bpy = 2,2'-bipyridine, n = 1, 2) were obtained, showing that they have interligand pi-pi interaction between the bpy ligand and the phenyl groups on the phosphorus ligand. All of the oligomers and polymers synthesized were emissive at room temperature in solution. For the dimers, broad emission was observed with a maximum at 523-545 nm, from the (3)MLCT excited-state of the tricarbonyl complex unit, [Re(N--N)(CO)3-PP-]. Emission from the longer oligomers and polymers with > or = 3 Re(I) units was observed at wavelengths 50-60 nm longer than those of the corresponding dimers. This fact and the emission decay results clearly show that energy transfer from the edge unit to the interior unit occurs with a rate constant of (0.9 x 10(8))-(2.5 x 10(8)) s(-1). The efficient energy transfer and the smaller exclusive volume of the longer Re(I) polymers indicated intermolecular aggregation for these polymers in an MeCN solution.