Esterification of (RS)-Ibuprofen by native and commercial lipases in a two-phase system containing ionic liquids

Four commercially available lipases and two native lipases from Aspergillus niger AC-54 and Aspergillus terreus AC-430 were used for the resolution of (RS)-Ibuprofen in systems containing the ionic liquids [BMIM][PF₆] and [BMIM][BF₄]. The lipases showed higher conversion in a two-phase system using [BMIM][PF₆] and isooctane compared to that in pure isooctane. Although the best enzyme was a commercially available lipase from Candida rugosa (E = 8.5), another native lipase, produced in our laboratory, from A. niger gave better enantioselectivity (E = 4.6) than the other lipases tested (E = 1.9–3.3.). After thorough optimization of several reaction conditions (type and ratios of isooctane/ionic liquid, amount of enzyme, and reaction time), the E-value of A. niger lipase (15% w/v) could be duplicated (E = 9.2) in a solvent system composed of [BMIM][PF₆] and isooctane (1:1) after 96 h of reaction.     

Kinetic resolution of 5-(hydroxymethyl)-3-phenyl-2-isoxazoline by using the ‘low-temperature method’ with porous ceramic-immobilized lipase

A significant enhancement of the enantioselectivity (E value = 249) in the lipase-catalyzed resolution of a primary alcohol, racemic 5-(hydroxymethyl)-3-phenyl-2-isoxazoline (±)-1, was obtained by using the ‘low-temperature method’ (−60 °C) with porous ceramic-immobilized lipase (Amano PS-C II) and vinyl acetate in acetone.     

Efficient resolution of profen ethyl ester racemates by engineered Yarrowia lipolytica Lip2p lipase

Enzyme-catalyzed enantiomer discrimination is still a great challenge for the development of industrial pharmaceutical processes. For the resolution of ibuprofen, naproxen and ketoprofen racemates, three major anti-inflammatory drugs, only lipases from Candida rugosa present a high selectivity if solvent and surfactant use is discarded. However, their catalytic activities are too low. In the present work, we demonstrate that the lipase Lip2p from the yeast Yarrowia lipolytica has a higher catalytic activity than C. rugosa lipases to hydrolyze the ethyl esters of ibuprofen, naproxen and ketoprofen, but its selectivity is not sufficient [E = 52 (S); 11 (S) and 1.5 (R) respectively]. The enantioselectivity was further improved by site-directed mutagenesis, targeted at the substrate binding site and guided by molecular modelling studies. By investigating the binding modes of the (R)- and (S)-enantiomers in the active site, two amino acid residues located in the hydrophobic substrate binding site of the lipase, namely residues 232 and 235, were identified as crucial for enantiomer discrimination and enzyme activity. The (S) enantioselectivity of Lip2p towards ethyl ibuprofen esters was rendered infinite (E ? 300) by replacing V232 by an A or C residue. Substitution of V235 by C, M, S, or T amino acids led to a great increase in the (S)-enantioselectivity (E ? 300) towards naproxen ethyl ester. Finally, the variant V232F enabled the efficient kinetic resolution of ethyl ketoprofen ester enantiomers [(R)-enantiopreference; E ? 300]. In addition to the increase in selectivity, a remarkable increase in velocity by 2.6, 2.7 and 2.5 times, respectively, was found for ibuprofen, naproxen and ketoprofen ethyl esters.     

Chemoenzymatic approach to enantiopure piperidine-based β-amino esters in organic solvents

This research concentrates on the enantioselectivities of lipase-catalysed reactions with methyl esters of 2-piperidylacetic acid and 3-piperidinecarboxylic acid derivatives. N-Acetylated 2-piperidylacetic acid methyl ester displayed good enantioselectivity (E = 66) in a 1:1 mixture of diisopropyl ether and butyl butanoate in the presence of lipase PS-C II from Burkholderia cepacia. The reaction is known as interesterification with butyl butanoate rather than alcoholysis with the butanol, because butyl butanoate has to be first hydrolysed or go through alcoholysis with MeOH in order to release butanol. Other N-protective groups (Boc, Ns, Fmoc and Bzn) gave excellent enantioselectivity (E >200) under the same conditions, and a gram-scale resolution was performed with N-Boc-2-piperidylacetic acid methyl ester. Reaction with a 3-piperidylcarboxylic acid derivative took place with disappointingly low enantioselectivity (E = 4), with Candida antarctica lipase B being the best of the lipases screened.     

Isobaric vapor–liquid equilibria for ethanol–water system containing different ionic liquids at atmospheric pressure

Isobaric vapor–liquid equilibrium (VLE) data for ethanol–water systems containing ionic liquids (ILs) 1-methyl-3-methylimidazolium dimethylphosphate ([MMIM][DMP]), 1-ethyl-3-methylimidazolium diethylphosphate ([EMIM][DEP]), 1-butyl-3-methylimidazolium bromide ([BMIM][Br]), 1-butyl-3-methylimidazolium chloride ([BMIM][Cl]) and 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF₆]) at atmospheric pressure (101.32 kPa) were measured with a circulation still. The results showed that the VLE of ethanol–water systems in the presence of different ILs was obviously different from that of the IL-free system. All ILs studied showed a salting-out effect, which gave rise to a change of the relative volatility of ethanol, and even to an elimination of the azeotropic point. It was found that the salting-out effect followed the order of [BMIM][Cl] > [BMIM][Br] > [BMIM][PF₆] and [MMIM][DMP] > [EMIM][DEP], which was ascribed to the preferential solvation ability of the ions resulting from the dissociation of the IL.     

(Liquid + liquid) extraction of methanol from alkanes using dialkylphosphate-based ionic liquids as solvents

In this work, the feasibility of ionic liquids (ILs), 1,3-dimethylimidazolium dimethylphosphate ([MMIM][DMP]), 1-ethyl-3-methylimidazolium diethylphosphate ([EMIM][DEP]), and 1-butyl-3-methylimidazolium dibutylphosphate ([BMIM][DBP]), as solvents for the extraction of methanol from its mixtures with hexane and heptane was analyzed. The knowledge of (liquid + liquid) equilibria (LLE) of these mixtures is necessary for the design of the extraction separation process. Hence, the LLE data for the ternary systems, {methanol + hexane + ([MMIM][DMP], or [EMIM][DEP], or [BMIM][DBP])}, and {methanol + heptane + ([MMIM][DMP], or [EMIM][DEP], or [BMIM][DBP])}, were measured at T = 298.2 K and atmospheric pressure. The experimental results were correlated with the thermodynamic nonrandom two-liquid (NRTL) model. The solute distribution ratios of methanol and methanol/alkane selectivities, derived from the experimental LLE data, were calculated and analyzed to evaluate the capability of the studied ILs to accomplish the separation target. Meanwhile, these capabilities were also compared with that of other ILs obtained from the literature.     

Highly enantioselective enzymatic resolution of aromatic β-amino acid amides with Pd-catalyzed racemization

The kinetic resolution of an aromatic β-amino acid amide 3a–d via N-acylation was explored with two lipases, Candida antarctica lipase A (CALA) and Pseudomonas stutzeri lipase (PSL). The PSL-catalyzed resolution proceeded with excellent enantioselectivity (E = >400) to give both acylated products and unreacted substrates in enantiopure forms. Three additional aromatic β-amino acid amides 3b–d were also resolved by PSL with a high level of enantioselectivity (E = >200). The PSL-catalyzed resolution of 3a was coupled with a Pd-catalyzed racemization to obtain enantiopure N-acylated product (R)-4a (>99% ee) in high yield (90%).     

First chemoenzymatic synthesis of (R)- and (S)-1-(9H-fluoren-9-yl)ethanol

A simple chemoenzymatic synthesis of 1-(9H-fluoren-9-yl)ethanol stereoisomers is described. The enantiomers were resolved by a kinetically controlled transesterification with vinyl acetate in the presence of commercially available lipases. High-throughput screening and subsequent exhaustive investigation of the utility of the lipases in a stereoselective process of introducing chirality have been carried out. Lipase A from Candida antarctica as a cross-linked aggregate (CAL-A-CLEA) was the most efficient enzyme for the resolution of the title compound providing (S)-1-(9H-fluoren-9-yl)ethanol and its (R)-acetate in enantiopure form (>99% ee). Under mild reaction conditions, excellent enantioselectivity (E = 407), and good isolated yields of the products were obtained.     

Toxicity Measurement of Imidazolium Ionic Liquids Using Acute Toxicity Test

Ionic liquids (ILs) can be considered as environmentally friendly solvent, but they have the ability to dissolve in water and accumulate in the environment. Therefore, the toxicity of ILs should be assessed in order to prevent their harm to human and environment. This study was carried out to investigate the toxicity of ILs towards marine and freshwater fish. Three ILs have been tested, which are 1-Butyl-3-methylimidazolium hydrogen sulfate and 1-Butyl-3-methylimidazolium bis (trifluoromethylsulfonyl) imide toward marine fish and 1-Hexyl-3-methylimidazolium bis (trifluoromethylsulfonyl) imide toward freshwater fish. Two different marine fish were employed, which are: Cephalopholis cruentata (grouper) and Lates calcarifer (barramundi). For freshwater fish, male Poecilia reticulate (guppy) was employed. The toxicity tests were conducted according to OECD (Organisation for Economic Cooperation and Development) guideline 203. For 1-Butyl-3-methylimidazolium hydrogen sulphate [BMIM][HSO4], the median lethal concentration (LC50) estimated toward Cephalopholis cruentatato be 199.98 mg.L^-1. For 1-Butyl-3-methylimidazolium bis (trifluoromethylsulfonyl) imide [BMIM][TFSI], LC50 estimated toward LatesCalcariferto be 374.11 mg.L^-1. While, for 1-Hexyl-3-methylimidazolium bis (trifluoromethylsulfonyl) imide, [HMIM][NTf2], LC50 estimated toward Poecilia Reticulate to be 207.49 mg.L^-1. All the LC50 values obtained can be identified as practically nontoxic liquids based on Acute Toxicity Rating Scale by Fish and Wildlife Service (FWS). As to our knowledge, there is no previous reported toxicity studies of [BMIM][HSO4] and [BMIM][TFSI] on marine fish and [HMIM] [NTf2] on freshwater fish. Thus, this paper can be used as a benchmark for researchers who are dealing with these three ILs.     

Using ionic liquid [EMIM][CH3COO] as an enzyme-‘friendly’ co-solvent for resolution of amino acids

An ionic liquid (IL), 1-ethyl-3-methylimidazolium acetate [EMIM][CH₃COO], was used in 0–4.0 M (∼60% IL, v/v), as a nonvolatile organic medium for the enzymatic resolution of amino acids. When dl-phenylalanine methyl ester was studied as a model substrate, high enantiomeric excesses (ee) of l-amino acid were obtained in all ionic concentrations; however, lower yields were observed at high IL concentrations. This IL is more enzyme-‘friendly’ than the hydrophilic organic solvent acetonitrile and those ILs containing chaotropic anions (such as [EMIM][OTs]). Among three proteases and two lipases investigated, lyophilized Bacillus licheniformis protease exhibited the best enantioselectivity and activity. Highly enantioselective resolutions were also produced for several other amino acids in 2.0 M IL. Interestingly, high ee were also found in deuterium oxide (D₂O) rather than in ordinary water, and a further enhancement was achieved with the co-existence of [EMIM][CH₃COO]. The heavy water effect was explained in terms of protein stabilization by D₂O. The secondary structural changes of enzyme in various media were interpreted by the second derivatives of FT-IR spectra.     

Enantioselective acylation of rac-2-phenylcycloalkanamines catalyzed by lipases

The kinetic resolution of some 2-phenylcycloalkanamines was performed by means of aminolysis reactions catalyzed by lipases, with Kazlauskas’ rule being obeyed in all cases. The size of the ring and the stereochemistry of the stereogenic centers of the amines had a strong influence on both the enantiomeric ratio and the reaction rate of these aminolysis processes. Lipase B from Candida antarctica (CAL-B) showed excellent enantioselectivities toward trans-2-phenylcyclohexanamine in a variety of reaction conditions (E >150), whereas lipase A from C. antarctica (CAL-A) was the best catalyst for the acylation of cis-2-phenylcyclohexanamine (E = 34) and trans-2-phenylcyclopropanamine (E = 9).     

The effect of the migrating group structure on enantioselectivity in lipase-catalyzed kinetic resolution of 1-phenylethanol

We have studied the effects of the acyl moiety on the enantioselectivity of three lipases: Candida antarctica B, Pseudomonas cepacia and Candida cylindracea, frequently used in kinetic resolutions by acylation or hydrolysis. The size of the acyl group was examined using various enol esters during the transesterification of 1-phenylethanol and the hydrolysis of the corresponding phenylethylesters. C. antarctica-B lipase showed the highest selectivity in the transesterification of 1-phenylethanol with isopropenyl and vinyl acetate, vinyl decanoate, vinyl laurate, (E > 200). The esters 1-phenyl -ethyl-acetate, decanoate and laurate are also hydrolyzed with high selectivities (E > 150) with CAL-B. The results can be correlated to the three-dimensional form of each lipase. The effect of the migrating group on the reactivity and selectivity of the lipases are discussed for both reactions.     

A new enzymatic strategy for the preparation of (2R,3S)-3-phenylisoserine: a key intermediate for the Taxol side chain

Burkholderia cepacia lipase PS-IM catalysed the hydrolysis of racemic ethyl 3-amino-3-phenyl-2-hydroxypropionate with excellent enantioselectivity (E >200), when the reaction was performed with added H₂O as a nucleophile, in iPr₂O, at 50 °C. The hydrolysis of the less reactive enantiomeric ethyl 3-amino-3-phenyl-2-hydroxypropionate with 18% HCl afforded the corresponding enantiomerically pure (2R,3S)-3-amino-3-phenyl-2-hydroxypropionic acid hydrochloride, a key intermediate for the Taxol side chain.     

Synthesis of enantiomerically pure glycidol via a fully enantioselective lipase-catalyzed resolution

The efficient enzymatic synthesis of enantiopure 2,3-epoxypropanol (glycidol) has been achieved. The racemic glycidyl butyrate was successfully resolved by enzymatic hydrolysis using a strategy that combines different immobilization protocols and different experimental reaction conditions. A new enzyme (25 kDa lipase)—which is a lipase-like enzyme purified from the pancreatic porcine lipase (PPL) extract—immobilized on DEAE–Sepharose was selected as the optimal biocatalyst. The optimal results were obtained at pH 7, 25 °C and 10% dioxane using this biocatalyst and a very high enantioselectivity for the enzyme was displayed, obtaining both (R)-(−)-glycidyl butyrate and (R)-(+)-glycidol with enantiomeric excesses >99% (E >100). The hydrolysis of (R)-(−)-glycidyl butyrate produced pure (S)-(−)-glycidol.     

Resolution of racemic 4-hydroxy-2-cyclopentenone with immobilized penicillin G acylase

Enantiomerically pure 4-oxo-2-cyclopentenyl derivatives were prepared by kinetic resolution with penicillin G acylase (EC 3.5.1.11) immobilized on an epoxy activated polymer. The enzyme selectively hydrolyzes the phenylacetyl ester of the (S)-enantiomer to give the (S)-alcohol. The enantioselectivity E increases from 12.4 in 0.05 M phosphate buffer, to E = 100–110 in acetonitrile-buffer (20% v/v) and E >200 in diisopropyl ether. The immobilized enzyme is stable and retains >90% of its activity after 10 recycles over one week at room temperature.     

Phosphoric-based ionic liquids as solvents to separate the azeotropic mixture of ethanol and hexane

Ethanol and hexane mixtures are present in industrial processes producing oxygenated additives for unleaded gasoline. The separation of ethanol and hexane is important but challenging due to the formation of an azeotropic mixture. This research focuses on the study of phosphoric-based ionic liquids (ILs) as green solvents for the separation of ethanol from hexane in a liquid extraction process. The knowledge of the (liquid + liquid) equilibrium (LLE) of this mixture is essential for the design of the extraction separation technique. Hence, the experimental determination of the LLE data for the ternary system {ethanol + hexane + 1,3-dimethylimidazolium dimethylphosphate ([MMIM][DMP])}, {ethanol + hexane + 1-ethyl-3-methylimidazolium diethylphosphate ([EMIM][DEP])} and {ethanol + hexane + 1-butyl-3-methylimidazolium dibutylphosphate ([BMIM][DBP])} at T = 303.2 K and atmospheric pressure was carried out. The reliability of the experimental LLE data was confirmed by applying the Othmer–Tobias and Hand equations, and the NRTL model was used to correlate the experimental results for the studied ternary system. The solute distribution ratio and selectivity, derived from the experimental LLE data, were calculated and analyzed evaluate the capacity of the investigated ILs as solvents in liquid extraction process. This capacity was also compared with that of other ILs. The experimental results show that the studied ILs can be suitable solvents in a (liquid + liquid) extraction for the separation of azeotropic mixtures of ethanol and hexane.     

(Liquid + liquid) equilibria for the ternary mixtures (alkane + toluene + ionic liquid) at T = 298.15 K: Influence of the anion on the phase equilibria

(Liquid + liquid) equilibrium data for the ionic liquids 1-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide, [BMpyr][NTf₂], and 1-butyl-1-methylpyrrolidinium trifluoromethanesulfonate, [BMpyr][TFO], with toluene, and heptane or cyclohexane were determined at T = 298.15 K and atmospheric pressure. In order to check if these ILs can be used as potential solvents for the extraction of toluene from aliphatic compounds, the ability of the ILs as solvents was evaluated in terms of selectivity and solute distribution ratio. The experimental data were correlated accurately with the Non Random Two-Liquid model.     

Preparation of isoxazolidinyl nucleoside enantiomers by lipase-catalysed kinetic resolution

An efficient biocatalytic procedure to obtain chiral N,O-nucleoside derivatives consisting of a lipase-catalysed resolution of the corresponding racemates in organic solvent has been developed. Enantioselective esterification of thymine and cytosine derivatives, (±)-9a and (±)-9b, has been investigated by comparing the efficiency of different lipases and acyl donors. Since esterification of (±)-9a and (±)-9b, occurred with low enantioselectivity (E ? 14) in the presence of the lipases considered, for preparative purposes we resorted, with success, to a double sequential kinetic resolution, using Lipozyme IM as the best catalyst. This approach enables us to obtain all the enantiomers with ee ? 95%. The absolute configuration of the new chiral N-acetyl cytosine derivative 9b was established by circular dichroism spectroscopy.     

Enzymatic transesterification of pharmacologically interesting β-aminocycloalkanol precursors

Chemoenzymatic syntheses of both enantiomers of cis- and trans-2-aminocyclopentanol as well as cis- and trans-2-aminocyclohexanol, which are valuable building blocks for a plethora of ligands and pharmaceuticals have been efficiently carried out. The strategy involves the stereospecific syntheses of racemic aminocycloalkanol precursors via tagging of a phthalimide as a masking group and subsequent lipase-catalyzed kinetic resolution. Most of the lipases exhibited excellent enantioselectivity (E ? 200) in the transesterification reactions of trans-derivatives, with both N-protected (R,R)-amino acetates and (S,S)-amino alcohols being isolated in enantiopure form. With regard to cis-derivatives, lipases were also very selective, even though the biotransformations were significantly slower.     

Prediction of thermophysical properties of novel ionic liquids based on serine [Cnmim][Ser] (n = 3, 4) using semiempirical methods

Two novel ionic liquids based on serine [C_nmim][Ser] (n = 3, 4) were prepared by the neutralization method and their structures were confirmed by ¹H NMR spectroscopy and differential scanning calorimetry (DSC). The density, surface tension, and refractive index of the two ILs were measured from T = (298.15 to 338.15) K. Since these ILs [C_nmim][Ser] (n = 3, 4) could form strong hydrogen bonds with water, small amount of water in the ILs is difficult to removed by common methods. In order to eliminate the effect of trace of water, the standard addition method (SAM) was applied to these measurements. On the basis of the experimental data, the speed of sound (μ), thermal expansion coefficient (α), molecular volume (V_m), standard entropy (S⁰298), entropy of surface (S_a), energy of surface (E_a), parachor (P), molar polarization (R_m), and polarization coefficient (α_p) were calculated, and the relationship between each of these properties of [C_nmim][Ser] (n = 3, 4) and temperatures was discussed. According to the additivity, the average value of anionic parachor, P_−(ave), was 180.81 for [Ser]⁻. At the same time, the surface tension of these serine ionic liquids could be estimated from their parachor and refractive index. The estimated values of the surface tension and the corresponding experimental data were almost identical.