Incorporation of Sulfate or Selenate Groups into Oxotellurates(IV): II. Compounds with Divalent Lead

Four mixed oxochalcogenate compounds in the systems Pb^II/X^VI/Te^IV/O/(C), (X^VI = S and Se) were obtained as minority phases under hydrothermal conditions (210 °C, one week). Their compositions as determined on the basis of single‐crystal X‐ray diffraction data are Pb₃(SeO₄)(TeO₃)₂, Pb₇O₄(SeO₄)₂(TeO₃), Pb₅(SeO₄)₂(TeO₄)(CO₃), and Pb₂(SO₄)(TeO₃). All crystal structures are centrosymmetric, and in each case the oxochalcogenate anions are isolated from each other. The Pb²⁺ cations exhibit distorted coordination polyhedra with coordination numbers ranging from six to ten, in the majority of cases with a “one‐sided” coordination by oxygen atoms. The presence of the very rare square‐pyramidal Te^IVO₄^4– anion distinguishes the structure of Pb₅(SeO₄)₂(TeO₄)(CO₃) from the other structures, where the oxotellurate(IV) anions exist in the TeO₃^2– trigonal‐pyramidal configuration.     

Incorporation of Sulfate or Selenate Groups into Oxotellurates(IV): III. Compounds with Magnesium or Zinc

The mixed oxochalcogenate compounds Mg₂(SO₄)(TeO₃)(H₂O), Mg₃(SO₄)(TeO₃)(OH)₂(H₂O)₂, Zn₂(SeO₄)(TeO₃), and Zn₄(SO₄)(TeO₃)₃ were obtained under hydrothermal conditions (210 °C, autogenous pressure). Structure analyses using single‐crystal X‐ray data revealed tellurium in all four compounds to be present in oxidation state +IV, whereas sulfur or selenium atoms exhibit an oxidation state of +VI. In the crystal structures of the two magnesium compounds, [MgO₅(H₂O)] octahedra [Mg₂(SO₄)(TeO₃)(H₂O) structure, isotypic with the Co and Mn analogues] or [MgO₄(OH)₂] and [MgO₄(OH)₂(H₂O)₂] octahedra [Mg₃(SO₄)(TeO₃)(OH)₂(H₂O)₂ structure, novel structure type] as well as trigonal‐pyramidal TeO₃^2– anions make up metal oxotellurate sheets, which are bridged by SO₄^2– anions. The polar crystal structure of Zn₂(SeO₄)(TeO₃) is isotypic with Zn₂(MoO₄)(TeO₃) and consists of [ZnO₄] tetrahedra, [ZnO₆] octahedra, SeO₄^2– and TeO₃^2– anions as principal building units that are connected into a framework structure. Such a structural arrangement, with basically the same coordination polyhedra as in Zn₂(SeO₄)(TeO₃) but with SO₄^2– instead of SeO₄^2– anions, is also found in the tellurium‐rich compound Zn₄(SO₄)(TeO₃)₃ that crystallizes in a novel structure type.     

Preparation and Crystal Structures of the Hydrous Mercury Tellurates,HgII(H4TeVIO6) and HgI2(H4TeVIO6)(H6TeVIO6)·2H2O

Single crystals of Hg^II(H₄Te^VIO₆) (colourless to light‐yellow, rectangular plates) and Hg^I₂(H₄Te^VIO₆)(H₆Te^VIO₆)·2H₂O (colourless, irregular) were grown from concentrated solutions of orthotelluric acid, H₆TeO₆, and respective solutions of Hg(NO₃)₂ and Hg₂(NO₃)₂. The crystal structures were solved and refined from single crystal diffractometer data sets (Hg^II(H₄Te^VIO₆): space group Pna2₁, Z = 4, a =10.5491(17), b = 6.0706(9), c = 8.0654(13)Å, 1430 structure factors, 87 parameters, R[F² > 2σ(F²)] = 0.0180; Hg^I₂(H₄Te^VIO₆)(H₆Te^VIO₆)·2H₂O: space group P1¯, Z = 1, a = 5.7522(6), b = 6.8941(10), c = 8.5785(10)Å, α = 90.394(8), β = 103.532(11), γ = 93.289(8)°, 2875 structure factors, 108 parameters, R[F² > 2σ(F²)] = 0.0184). The structure of Hg^II(H₄Te^VIO₆) is composed of ribbons parallel to the b axis which are built of [H₄TeO₆]^2— anions and Hg²⁺ cations held together by two short Hg—O bonds with a mean distance of 2.037Å. Interpolyhedral hydrogen bonding between neighbouring [H₄TeO₆]^2— groups, as well as longer Hg—O bonds between Hg atoms of one ribbon to O atoms of adjacent ribbons lead, to an additional stabilization of the framework structure. Hg^I₂(H₄Te^VIO₆)(H₆Te^VIO₆)·2H₂O is characterized by a distorted hexagonal array made up of [H₄TeO₆]^2— and [H₆TeO₆] octahedra which spread parallel to the bc plane. Interpolyhedral hydrogen bonding between both building units stabilizes this arrangement. Adjacent planes are stacked along the a axis and are connected by Hg₂²⁺ dumbbells (d(Hg—Hg) = 2.5043(4)Å) situated in‐between the planes. Additional stabilization of the three‐dimensional network is provided by extensive hydrogen bonding between interstitial water molecules and O and OH‐groups of the [H₄TeO₆]^2— and [H₆TeO₆] octahedra. Upon heating Hg^I₂(H₄Te^VIO₆)(H₆Te^VIO₆)·2H₂O decomposes into TeO₂ under formation of the intermediate phases Hg^II₃Te^VIO₆ and the mixed‐valent Hg^IITe^IV/VI₂O₆.     

Synthese und Kristallstruktur von Te3O3(PO4)2, einer Verbindung mit fünffach koordiniertem Tellur(IV)

Synthesis and Crystal Structure of Te₃O₃(PO₄)₂, a Compound with 5‐fold Coordinate Tellurium(IV) Polycrystalline Te₃O₃(PO₄)₂ is formed during controlled dehydration of (Te₂O₃)(HPO₄) with (Te₈O₁₀)(PO₄)₄ as an intermediate product. Colourless single crystals were prepared by heating stoichiometric amounts of the binary oxides P₂O₅ und TeO₂ in closed silica glass ampoules at 590 °C for 8 hours. The crystal structure (P2₁/c, Z = 4, α = 12.375(2), b = 7.317(1), c = 9.834(1)Å, β = 98.04(1)°, 1939 structure factors, 146 parameters, R[F² > 2σ(F²)] = 0.0187, wR2(F² all) = 0.0367) was determined from four‐circle diffractometer data and consists of [TeO₅] polyhedra und PO₄ tetrahedra as the main building units. The framework structure is made up of cationic zigzag‐chains of composition [Te₂O₃]²⁺ which extend parallel to [001] and anionic [Te(PO₄)₂]^2— units linked laterally to these chains. This leads to the formation of [Te₂O₃][Te(PO₄)₂] layers parallel to the bc plane which are interconnected via weak Te‐O bonds.     

Sc2Te5O13 und Sc2TeO6: Die ersten Oxotellurate des Scandiums

Sc₂Te₅O₁₃ and Sc₂TeO₆: The First Oxotellurates of Scandium Sc₂Te₅O₁₃ and Sc₂TeO₆ are the first oxotellurates of scandium that could be structurally elucidated by X‐ray diffraction using single crystals. The scandium(III) oxotellurate(IV) Sc₂Te₅O₁₃ was synthesized by reacting Sc₂O₃ with TeO₂ at 850 °C and crystallizes in the triclinic system with space group (no. 2) and the lattice parameters a = 660.67(5), b = 855.28(7), c = 1041.10(9) pm, α = 86.732(8), β = 86.264(8), and γ = 74.021(8)° (Z = 2). The crystal structure contains chains respectively strands of alternatingly edge‐ and vertex‐sharing [ScO₆]^9? and [ScO₇]^11? polyhedra. These strands are connected by [TeO₃₊₁]^(2+2)? oxotellurate(IV) anions. The coordination spheres of Sc³⁺ appear markedly smaller than those of M³⁺ cations in the other known compounds of the formula type M₂Te₅O₁₃ (M = Y, Dy – Lu), therefore Sc₂Te₅O₁₃ is not really isotypic, but only isopuntal with these compounds. Single crystals of the scandium(III) oxotellurate(VI) Sc₂TeO₆ were obtained through the fusion of a mixture of Sc₂O₃ and TeO₃ at 850 °C. It crystallizes trigonally (a = 874.06(7), c = 479.85(4) pm and c/a = 0.549) with the Na₂SiF₆‐type structure in space group P321 (no. 150) and three formula units per unit cell. Its crystal structure is built up by a hexagonal closest packing (hcp) of oxide anions with the Sc³⁺ cations residing in ¹/₃ and the Te⁶⁺ cations in ¹/₆ of the octahedral interstices in a well‐ordered occupation pattern. Thus one can address the structural situation in Sc₂[TeO₆] as a stuffed β‐WCl₆‐type arrangement.     

Phase Formation Studies of Lead(II) Copper(II) Oxotellurates: The Crystal Structures of Dimorphic PbCuTeO5, PbCuTe2O6, and [Pb2Cu2(Te4O11)](NO3)2

Two modifications of the oxotellurate(VI) PbCuTeO₅ were isolated as single crystals from product mixtures obtained from solid state reactions, whereas single crystals of the oxotellurates(IV) PbCuTe₂O₆ and [Pb₂Cu₂(Te₄O₁₁)](NO₃)₂ were grown under hydrothermal conditions. The crystal structures of all compounds comprise of characteristic coordination polyhedra, viz. nearly square [CuO₄] plaquettes for divalent copper, octahedral [TeO₆] units for hexavalent tellurium, trigonal‐pyramidal [TeO₃] and bisphenoidal [TeO₄] groups for tetravalent tellurium, and distorted [PbO_x] polyhedra for divalent lead. PbCuTeO₅ is dimorphic and crystallizes in a monoclinic and a triclinic modification, related by a translationengleiche group‐subgroup relation of index 2. PbCuTe₂O₆ represents the ideal composition of the rare mineral choloalite. The characteristic feature of the crystal structure of [Pb₂Cu₂(Te₄O₁₁)](NO₃)₂ is its layered set‐up, comprised of cationic [Pb₂Cu₂(Te₄O₁₁)]²⁺ ribbons (width approximately 6.7 Å) sandwiched between nitrate anions that are only weakly bound to the cationic layers.     

Synthesis and Crystal Structure of Cs(VO2)3(TeO3)2, a New Layered Cesium Vanadium(V) Tellurite

Synthetic Cs(VO₂)₃(TeO₃)₂ is built up from infinite sheets of distorted octahedral V^VO₆ groups, sharing vertices. These octahedral layers are “capped” by Te atoms (as parts of pyramidal [Te^IVO₃]^2– groups) on both faces of each V/O sheet, with inter‐layer, 12‐coordinate, Cs⁺ cations providing charge compensation. Cs(VO₂)₃(TeO₃)₂ is isostructural with M(VO₂)₃(SeO₃)₂ (M = NH₄, K). Crystal data: Cs(VO₂)₃(TeO₃)₂, M_r = 732.93, hexagonal, space group P6₃ (No. 173), a = 7.2351(9) Å, c = 11.584(2) Å, V = 525.1(2) ų, Z = 2, R(F) = 0.030, wR(F ²) = 0.063.     

Syntheses, crystal structures and optical properties of the first strontium selenium(IV) and tellurium(IV) oxychlorides: Sr3(SeO3)(Se2O5)Cl2 and Sr4(Te3O8)Cl4

Two new quaternary strontium selenium(IV) and tellurium(IV) oxychlorides, namely, Sr₃(SeO₃)(Se₂O₅)Cl₂ and Sr₄(Te₃O₈)Cl₄, have been prepared by solid-state reaction. Sr₃(SeO₃)(Se₂O₅)Cl₂ features a three-dimensional (3D) network structure constructed from strontium(II) interconnected by Cl⁻, SeO₃²⁻ as well as Se₂O₅²⁻ anions. The structure of Sr₄(Te₃O₈)Cl₄ features a 3D network in which the strontium tellurium oxide slabs are interconnected by bridging Cl⁻ anions. The diffuse reflectance spectrum measurements and results of the electronic band structure calculations indicate that both compounds are wide band-gap semiconductors.     

Synthesis, crystal and band structures, and optical properties of a new lanthanide-alkaline earth tellurium(IV) oxide: La2Ba(Te3O8)(TeO3)2

A new quaternary lanthanide alkaline-earth tellurium(IV) oxide, La₂Ba(Te₃O₈)(TeO₃)₂, has been prepared by the solid-state reaction and structurally characterized. The compound crystallizes in monoclinic space group C2/c with a=19.119(3), b=5.9923(5), c=13.2970(19) Å, β=107.646(8)°, V=1451.7(3) Å³ and Z=4. La₂Ba(Te₃O₈)(TeO₃)₂ features a 3D network structure in which the cationic [La₂Ba(TeO₃)₂]⁴⁺ layers are cross-linked by Te₃O₈⁴⁻ anions. Both band structure calculation by the DFT method and optical diffuse reflectance spectrum measurements indicate that La₂Ba(Te₃O₈)(TeO₃)₂ is a wide band-gap semiconductor.     

Nd2(SeO3)2(SeO4) · 2H2O – a Mixed‐Valence Compound containing Selenium in the Oxidation States +IV and +VI

Pale pink crystals of Nd₂(SeO₃)₂(SeO₄) · 2H₂O were synthesized under hydrothermal conditions from H₂SeO₃ and Nd₂O₃ at about 200 °C. X‐ray diffraction on powder and single‐crystals revealed that the compound crystallizes with the monoclinic space group C 2/c (a = 12.276(1) Å, b = 7.0783(5) Å, c = 13.329(1) Å, β = 104.276(7)°). The crystal structure of Nd₂(SeO₃)₂(SeO₄) · 2H₂O is an ordered variant of the corresponding erbium compound. Eight oxygen atoms coordinate the Nd^III atom in the shape of a bi‐capped trigonal prism. The oxygen atoms are part of pyramidal (Se^IVO₃)^2? groups, (Se^VIO₄)^2? tetrahedra and water molecules. The [NdO₈] polyhedra share edges to form chains oriented along [010]. The selenate ions link these chains into layers parallel to (001). The layers are interconnected by the selenite ions into a three‐dimensional framework. The dehydration of Nd₂(SeO₃)₂(SeO₄) · 2H₂O starts at 260 °C. The thermal decomposition into Nd₂SeO₅, SeO₂ and O₂ at 680 °C is followed by further loss of SeO₂ leaving cubic Nd₂O₃.     

HoClTe2O5: Ein tellurdioxidreiches Holmium(III)‐Chlorid‐Oxotellurat(IV)

HoClTe₂O₅: A Telluriumdioxide‐rich Holmium(III) Chloride Oxotellurate(IV) While attempting to synthesize anionically derivatized holmium oxotellurates by reacting holmium chloride (HoCl₃) with tellurium oxide (TeO₃; molar ratio 1 : 3, 800°C 10 d) in evacuated silica ampoules, transparent, greenish yellow and coarse single crystals of holmium(III) chloride oxotellurate(IV) HoClTe₂O₅ (triclinic, P1; a = 762.07(6), b = 796.79(6), c = 1010.36(8) pm, α = 100.987(4), ß = 99.358(4), γ = 91.719(4)°; Z = 4) were obtained. The crystal structure contains eightfold coordinated (Ho1)³⁺ (only surrounded by oxygen atoms) and sevenfold coordinated (Ho2)³⁺ cations (surrounded by one chloride and six oxide anions). Each sort of holmium polyhedra convenes independently to chains along [100] by edge‐sharing which again combine alternately via O6 and O9 to form ²{[Ho₂O₁₀(Cl1)]^15—} layers parallel (001). Each of the four crystallographically different Te⁴⁺ cations are surrounded by three close oxygen atoms (d(Te—O) = 188 — 195 pm) and always one more situated further away. The stereochemical activity of the non‐bonding electron pairs (“lone pairs”) leads to ψ¹‐trigonal bipyramidal coordination figures. The ψ¹‐tetrahedral [TeO₃]^2— basic units form discrete [Te₂O₅]^2— doubles with ecliptic conformation which are arranged in a fish‐bone pattern parallel to (001) on both sides of the ²{[Ho₂O₁₀Cl]^15—} layers. The coherence of the ²{[Ho₂(Cl1)Te₄O₁₀]⁺} layers is exclusively maintained via Cl2—Te1 contacts with an extraordinary long distance of 335 pm. As (Cl1)^— belongs to the coordination sphere of (Ho2)³⁺ and (Cl2)^— is only surrounded by Te⁴⁺, the compound should be correctly named holmium(III) chloride oxochlorotellurate(IV) Ho₂Cl[Te₄O₁₀Cl] (Z = 2).     

The Crystal Structures and Raman Spectra of Three New Hydrothermally Synthesized Copper–Zinc–Oxotellurates(IV)

Abstract . Three new copper–zinc–tellurites, Zn₄Cu(Te^IVO₃)₄Cl₂, Cu₂Zn₂(Te^IVO₃)₂(SO₄)(OH)₂ · H₂O and Cu₂Zn(Te^IVO₄)(SO₄) · H₂O (henceforth I , II and III ), were synthesized under mild hydrothermal conditions (473 K, in Teflon-lined steel vessels). They were characterized in detail by a combination of crystal-structure determination (using single-crystal X-ray diffraction data), single-crystal micro-Raman spectroscopy and chemical analyses (energy-dispersive X-ray spectroscopy in a scanning electron microscope). Each compound crystallizes in a new structure type, and additionally, II and III represent the first two ever reported copper–zinc–tellurite–sulfates. I [systematic name: tetrazinc copper(II) tetrakis-oxotellurate(IV) dichloride] is triclinic, P1 , and forms a framework structure based on ZnO₆ and ZnO₅Cl octahedra, linked into sheets connected via Jahn–Teller-distorted CuO₄Cl₂ octahedra, with Te^IVO₃ trigonal pyramids and Te^IV₂O₆ dimers (composed of two edge-sharing Te^IVO₄ disphenoids) filling the remaining space. II [dicopper(II) dizinc bis-oxotellurate(IV) oxosulfate(VI) bis-hydroxide monohydrate] is trigonal, R3m, with a simonkolleite-like framework. Distinct layers formed from (Cu,Zn)φ₆ (φ = O, OH) octahedra and Te^IVO₃ trigonal pyramids extend parallel to (001) and sandwich disordered SO₄^2– anions and H₂O groups. III [dicopper(II) zinc oxotellurate(IV) oxosulfate(VI) hydrate] is orthorhombic, Pnma, and also has a layered structure [extending parallel to (100)]. Positively charged layers of composition [Cu₂ZnTe^IVO₄]²⁺ (containing Te as Te^IVO₄ disphenoids) alternate with SO₄^2– anions and H₂O groups in the interlayer space. Stacking disorder caused by the order-disorder nature of the crystal structure is reflected by the presence of residual electron density in difference-Fourier maps and the structure was refined as an overlay of two stacking possibilities.     

Low‐Dimensional Structural Units in Amine‐Templated Uranyl Oxoselenates(VI): Synthesis and Crystal Structures of [C3H12N2][(UO2)(SeO4)2(H2O)2](H2O), [C5H16N2]2[(UO2)(SeO4)2(H2O)](NO3)2, [C4H12N][(UO2)(SeO4)(NO3)], and [C4H14N2][(UO2)(SeO4)2(H2O)]

The crystals of four amine‐templated uranyl oxoselenates(VI), [C₃H₁₂N₂][(UO₂)(SeO₄)₂(H₂O)₂](H₂O) ( 1 ), [C₅H₁₆N₂]₂[(UO₂)(SeO₄)₂(H₂O)](NO₃)₂ ( 2 ), [C₄H₁₂N][(UO₂)(SeO₄)(NO₃)] ( 3 ), and [C₄H₁₄N₂][(UO₂)(SeO₄)₂(H₂O)] ( 4 ) were prepared by evaporation from aqueous solution of uranyl nitrate, selenic acid and the respective amine. The crystal structures of all four compounds have been solved by direct methods from X‐ray diffraction data. The structure of 1 (triclinic, , a = 7.5611(16), b = 7.7650(17), c = 12.925(3) Å, α = 94.605(18), β = 94.405(17), γ = 96.470(17)°, V = 748.8(3) ų, R₁ = 0.029 for 2769 unique observed reflections) is based upon 0D‐units of the composition [(UO₂)₂(SeO₄)₄(H₂O)₄]^4?. These discrete units are composed from two pentagonal [UO₇]^8? bipyramids linked via [SeO₄]^2? tetrahedra and are unknown in structural chemistry of uranium so far. The structure of 2 (monoclinic, C2/c, a = 28.916(5), b = 8.0836(10), c = 11.9856(16) Å, β = 110.909(11)°, V = 2617.1(6) ų, R₁ = 0.035 for 2578 unique observed reflections) contains [(UO₂)(SeO₄)₂(H₂O)]^2? chains of corner‐sharing pentagonal [UO₇]^8? bipyramids and [SeO₄]^2? tetrahedra. The chains run parallel to the c axis and are arranged into layers parallel to (100). In the structure of 3 (monoclinic, C2/m, a = 21.244(5), b = 7.1092(11), c = 8.6581(18) Å, β = 97.693(17)°, V = 1295.8(4) ų, R₁ = 0.027 for 1386 unique observed reflections), pentagonal [UO₇]^8? bipyramids share corners with three [SeO₄]^2? tetrahedra each and an edge with a [NO₃]^? anion to form [(UO₂)(SeO₄)(NO₃)]^? chains parallel to the b axis. In the structure of 4 (triclinic, , a = 6.853(2), b = 10.537(3), c = 10.574(3) Å, α = 99.62(3), β = 94.45(3), γ = 100.52(3)°, V = 735.6(4) ų, R₁ = 0.045 for 2713 unique observed reflections), one symmetrically independent pentagonal [UO₇]^8? bipyramid shares corners with four [SeO₄]^2? tetrahedra to form the [(UO₂)(SeO₄)₂(H₂O)]^2? chains parallel to the a axis. A comparison to related uranyl compounds is given.     

Exploration of New Birefringent Crystals in Bismuth d0 Transition Metal Selenites

The first examples of bismuth fluoride selenites with d⁰-TM/Te^VI polyhedrons, namely, Bi₄TiO₂F₄(SeO₃)₄ ( 1 ), Bi₄NbO₃F₃(SeO₃)₄ ( 2 ), Bi₄TeO₄F₂(TeO₃)₂(SeO₃)₂ ( 3 ), Bi₂F₂(MoO₄)(SeO₃) ( 4 ) and Bi₂ZrO₂F₂(SeO₃)₂ ( 5 ) have been successfully synthesized under hydrothermal reactions by aliovalent substitution. The five new compounds feature three different types of structures. Compounds 1 – 3 , containing Ti^IV, Nb^V and Te^VI respectively, are isostructural, exhibiting a new 3D framework composed of a 3D bismuth oxyfluoride architecture, with intersecting tunnels occupied by d⁰-TM/Te^VI octahedrons and selenite/tellurite groups. Interestingly, compound Bi₄TeO₄F₂(TeO₃)₂(SeO₃)₂ ( 3 ) is the first structure containing Se^IV and mixed-valent Te^IV/Te^VI cations simultaneously. Compound 4 features a new 3D structure formed by a 3D bismuth oxyfluoride network with MoO₄ tetrahedrons and selenites groups imbedded in the 1D tunnels. Compound 5 displays a novel pillar-layered 3D open framework, consisting of 2D bismuth oxide layers bridged by the [ZrO₂F₂(SeO₃)₂]⁶⁻ polyanions. Theoretical calculations revealed that the five compounds displayed very strong birefringence. The birefringence values of compounds 1 – 3 , especially, are above 0.19 at 1064 nm, which are larger than the mineral calcite. Based on the structure and property analysis, it was found that the asymmetric SeO₃ groups (and TeO₃ in compound 3 ) displayed the largest anisotropy, compared with the bismuth cations and the d⁰-TM/Te polyhedra, which is beneficial to the birefringence.     

Reaction with SO3 in Ionic Liquids: The Example of K2(S2O7)­(H2SO4)

The ionic liquid 1‐butyl‐3‐methylimidazolium hydrogensulfate, [bmim]HSO₄, turned out to be resistant even to strong oxidizers like SO₃. Thus, it should be a suitable solvent for the preparation of polysulfates at low temperatures. As a proof of principle we here present the synthesis and crystal structure of K₂(S₂O₇)(H₂SO₄), which has been obtained from the reaction of K₂SO₄ and SO₃ in [bmim]HSO₄. In the crystal structure of K₂(S₂O₇)(H₂SO₄) (orthorhombic, Pbca, Z = 8, a = 810.64(2) pm, b = 1047.90(2) pm, c = 2328.86(6) pm, V = 1978.30(8) ų) two crystallographically unique potassium cations are coordinated by a different number of monodentate and bidentate‐chelating disulfate anions as well as by sulfuric acid molecules. The crystal structure consists of alternating layers of [K₂(S₂O₇)] slabs and H₂SO₄ molecules. Hydrogen bonds between hydrogen atoms of sulfuric acid molecules and oxygen atoms of the neighboring disulfate anions are observed.     

Cd(II) MOFs based on cadmium/carboxylate units and 4,4′-bis(benzoimidazol-1-yl)bibenzene: syntheses,structures, and luminescence

Solvothermal reactions of CdCl₂·2.5H₂O with 4,4′-bis(benzoimidazol-1-yl)bibenzene (bimbb) and 1,4-benzenedicarboxylic acid (1,4-H₂bdc), 4,4′-biphenyldicarboxylic acid (4,4′-H₂bpdb), 5-methyl-1,3-benzenedicarboxylic acid (5-Me-1,3-H₂bdc), or 1,3,5-benzenetricarboxylic acid (H₃btc) afforded four 3-D metal–organic frameworks, {[Cd₂(1,4-bdc)₂(bimbb)₂]·H₂O}_n (1), {[Cd₂(4,4′-bpdb)₂(bimbb)(H₂O)₂]} _n (2), [Cd₂(5-Me-1,3-bdc)₂(bimbb)] _n (3), and {[Cd₃(btc)₂(bimbb)(H₂O)₂]·2H₂O} _n (4). Complexes 1–4 were characterized by elemental analysis, IR spectroscopy, powder X-ray powder diffraction, and single-crystal X-ray diffraction. 1 possesses a 3-D framework with 2-D undulated (8,4) layers which are further connected by bimbb pillars. 2 forms a 3-D pillared-layer framework constructed through 2-D undulated (4,4) layers and bimbb pillars. 3 has 1-D ribbons of [Cd₄(5-Me-1,3-bdc)₄] _n which are linked by bimbb to form a 3-D structure. 4 exhibits a 3-D pillared-bilayer framework consisting of (6,3) double-decker [Cd₉(btc)₆(μ-OH₂)₆] _n layers and bimbb pillars. The Schläfli symbols for the four frameworks are (4²·6³·8)(4²·6⁵·8³) (1), (4⁴·6⁶) (2), (4⁴·6²)(4⁶·6⁴) (3), and (6³)(6¹⁰) (4). The photoluminescent properties of 1–4 were also investigated.     

Synthesis,Structures, and Properties of Cadmium(II) and Nickel(II) Coordination Polymers Based on a 4,4′‐Biphenyl‐Containing Ligand and Aliphatic Carboxylic Acids

The coordination polymers [Cd₂(bbmb)₂(L₁)(HL₁)_0.5(H₂O)]_n ( 1 ), [Cd₂(bbmb)₂(L₂)₂(H₂O) · (H₂O)]_n ( 2 ), and [Ni(bbmb)₂(L₃)]_n ( 3 ), were synthesized by the hydrothermal reaction of 4,4′‐bis(benzimidazol‐1‐ylmethyl)biphenyl (bbmb) with Cd^II/Ni^II ions in the presence of three flexible aliphatic acids [tricarballylic acid (H₃L₁), succinate (H₂L₂), and adipate (H₂L₃)]. Complexes 1 – 3 were structurally characterized by elemental analysis, IR spectroscopy and single‐crystal and X‐ray powder diffraction analyses. Complex 1 presents a 3D 3‐nodal (3,4,4)‐connected net with 3 , 4 , 4T78 topology, 2 exhibits a 3D network with 6⁶‐ dia topology, whereas 3 is a chain structure and further extended by hydrogen bonding interactions to form a 2D supramolecular network. Structural diversity of these complexes indicates that these frameworks could be tuned by the conformation of bbmb ligand and the different coordination modes of the aliphatic carboxylate co‐ligands. The thermal and fluorescence properties, the catalytic activities of complexes 1 – 3 in a Fenton‐like process were investigated.     

Einkristalle des Cer(IV)–Oxotellurats(IV) CeTe2O6

Single Crystals of the Cerium(IV) Oxotellurate(IV) CeTe₂O₆ Orange‐red, coffin‐shaped single crystals of CeTe₂O₆ (monoclinic, P2₁/n; a = 703.71(5), b = 1106.32(8), c = 735.24(5) pm, β = 108.066(6)°; Z = 4) were obtained by the reaction of admixtures of cerium dioxide and tellurium dioxide (CeO₂, TeO₂; molar ratio 1 : 2) in the presence of fluxing CsCl (750 °C, 4 d) in evacuated silica tubes. The crystal structure contains eightfold coordinated Ce⁴⁺ cations, which are surrounded by irregular trigonal dodecahedra of oxygen atoms. The interconnection of these [CeO₈] polyhedra occurs via two edges (O2–O2′ and O3–O3′) with equatorial orientation relative to each other forming zigzag chains {[CeO_4/1O_4/2]^8–} which run parallel to [100] and arrange as a hexagonal packing of rods. Both crystallographically different Te⁴⁺ cations exhibit trigonal non‐planar coordination figures (ψ¹ tetrahedra) with three oxygen atoms each as a result of the stereochemical activity of the non‐binding electron pairs (“lone pairs”). They also are responsible for the necessary cross‐linkage of the anionic {[CeO₆]^8–} chains. The isotypical relationship with Ce(SeO₃)₂ therefore justifies the formulation Ce(TeO₃)₂ for CeTe₂O₆.     

Two Modifications of (TeO)(HAsO4) and its Dehydration Product (Te3O3)(AsO4)2 – Three more Examples of Tellurium(IV) with a Fivefold Oxygen Coordination

Two modifications of (TeO)(HAsO₄) were obtained by reacting tellurium dioxide with arsenic acid under boiling conditions (modification I, acid concentration 80 wt‐%) or under hydrothermal conditions (modification II, acid concentration 50 wt‐%). The crystal structures of the two modifications were determined from single‐crystal X‐ray data [modification I: P2₁/c, Z = 4, a = 7.4076(10), b = 5.9596(7), c = 9.5523(11) Å, β = 102.589(8)°, 2893 structure factors, 68 parameters, R[F² > 2σ(F²)] = 0.0247, wR₂(F² all) = 0.0530; modification II: P2₁/c, Z = 4, a = 6.2962(4), b = 4.7041(3), c = 13.9446(8) Å, β = 94.528(3)°, 2549 structure factors, 69 parameters, R[F² > 2σ(F²)] = 0.0207, wR₂(F² all) = 0.0462)]. Dehydration of (TeO)(HAsO₄)‐II at temperatures above 260 °C results in the formation of polycrystalline (Te₃O₃)(AsO₄)₂. Single crystals of the anhydrous product were grown either by heating stoichiometric amounts of the binary oxides TeO₂ and As₂O₅ in closed silica glass ampoules or with higher concentrated arsenic acid (80 wt‐%) under hydrothermal conditions at 220 °C. The common features in the crystal structures of (Te₃O₃)(AsO₄)₂ [P$\bar{1}$ , Z = 4, a = 6.5548(4), b = 7.6281(6), c = 15.0464(15) Å, α = 140.212(6), β = 102.418(9)°, γ = 77.346(5)°, 5718 structure factors, 146 parameters, R[F² > 2σ(F²)] = 0.0351, wR₂(F² all) = 0. 1093] and in that of the two modifications of acidic (TeO)(HAsO₄) are [TeO₅] square‐pyramids and [AsO₄] tetrahedra. In anhydrous (Te₃O₃)(AsO₄)₂ and in (TeO)(HAsO₄)‐II, a layered arrangement of the building units is found, whereas in the (TeO)(HAsO₄)‐I structure strands are formed. Different hydrogen bonding interactions are present in the two modifications of (TeO)(HAsO₄).