2-苯基吲哚单重态氧反应机理

本文比较了在甲醇介质下, 2-苯基吲哚(1)单重态氧反应中的捕捉反应以及2-苯基-3H-吲哚-3-酮(4)的亲核加成反应特征。结果显示, 在1的单重态氧反应中, 捕捉反应主要发生于两性离子(2)阶段, 而4并非导致捕捉产物的重要中间体。根据上述事实, 结合有关反应溶剂极性效应的研究结果, 对反应机理进行了探讨。     

Interactions of singlet oxygen with 2,5-dimethyl-2,4-hexadiene in polar ano non-polar solvents evidence for a vinylog ene-reaction

2,5-Dimethyl-2,4-hexadiene ($\text{1}$)was studied as a singlet oxygen acceptor in various solvents. $\text{1}$undergoes concomitantly the three well-known modes of singlet oxygen reactions: (1) the ene-reaction to give the allylic hydroperoxide $\text{3}$, (2) the (4+2)-cycloaddition to give the endoperoxide $\text{4}$, and (3) the (2+2)-cycloaddition to give the dioxetane $\text{2}$. Beyond that (and in contrast to simple olefins), there are (4) “physical” quenching and (5) a “vinylog ene-reaction” to give the twofold-unsaturated hydroperoxide $\text{5}$. The latter reaction represents a novel mode of singlet oxygen interaction with a substituted 1,3-diene. - Kinetic analysis shows that “physical” quenching, endoperoxide and vinylog ene-product formations proceed with solvent-inde pendent rates; the rates of dioxetane and ene-product formations, however, are solvent-dependent. - A mechanism (Scheme 3) is proposed, according to which endoperoxide formation is due to a concerted singlet oxygen reaction with the s-cis-conformational isomer $\text{1b}$; with the s-trans-isomer $\text{1a}$, “physical” quenching and the vinylog ene-reaction proceed via a non-polar singlet diradical intermediate, whereas the ene-product formation occurs via a per epoxide-like transition state. In aprotic solvents, the dioxetane is mainly formed via a “tight-geometry intermediate”, in methanolic solution via a solvent-stabilized zwitterion; the latter is also responsible for the formation of the methanol-addition product $\text{6}$.     

Pt(IV)-catalyzed generation and [4+2]-cycloaddition reactions of o-quinone methides

Novel intermolecular and intramolecular generations of ortho-quinone methides and their formal [4+2]-cycloaddition reactions with olefins catalyzed by PtCl₄ and AuCl₃ under mild conditions have been developed. Good to excellent yields (up to 99%) and diastereoselectivity (up to >99:1) of the chromans were obtained. PtCl₄ was found to be effective and compatible with various functional groups present in the substrates. A mechanism accounting for its catalytic cycle is proposed and discussed.     

Theoretical study of the reaction of vitamin B6 with 1O2

Singlet oxygen is known to cause oxidative stress in cells, leading to severe damage (e.g., lipid peroxidation, membrane degradation, mutagenic alterations to DNA, protein misfunctionality). Recently, pyridoxine has been discovered to be capable of quenching singlet oxygen, however, the mechanism of this reaction remains essentially unknown. In this work, we have investigated four sets of reactions: 1) 1,3-addition to a double bond connected to a hydrogen-carrying group, resulting in the formation of allylic hydroperoxides; 2) [pi2+pi2] 1,2-cycloaddition to an isolated double bond, resulting in the formation of 1,2-peroxides; 3) 1,4-cycloaddition to a system containing at least two conjugated double bonds, resulting in the formation of the so-called 1,4-peroxides; 4) 1,4-addition to phenols and naphthols with the formation of hydroperoxide ketones. Thermodynamically, reaction 4 and the 6(9), 3(8), and 5(8) cases of reaction 1 are the most exergonic ones, with energies ranging from -16 to -18 kcal mol(-1). Furthermore, reaction 4 shows the lowest barrier through the reaction path, and is predicted to be the preferred mechanism for the pyridoxine + singlet-oxygen reaction, which is in agreement with previous experimental results.     

PSORALEN-OLEFIN PHOTOPRODUCI'S: FIRST OBSERVATION OF A PHOTO-ENE REACTION

Abstract Methyl-substituted psoralens (4'-(hydroxymethyl)-4,5',8-trimethylpsoralen and 4,5',8-trimethylpsoralen) are found to yield an ene product as well as the expected [2+2] cycloaddition product from photochemical reaction with simple olefins. As determined by absorbance, liquid chromatography-mass spectrometry and nuclear magnetic resonance, both products are formed at the pyrone side of the respective psoralen. The product distribution is dependent on olefin concentration as well as the nature of the olefin. In deoxygenated solutions, cyclic olefins form as much as 50% ene product, while unsubstituted straight-chain olefins form as little as 3%. In oxygenated solutions, the product distribution is strongly affected by singlet oxygen.     

A new chiral Rh(II) catalyst for enantioselective [2 + 1]-cycloaddition. mechanistic implications and applications

A novel chiral Rh(II) catalyst (1) is introduced for the [2 + 1]-cycloaddition of ethyl diazoacetate to terminal acetylenes and olefins with high enantioselectivity. The catalyst 1 consists of one acetate bridging group and three mono-N-triflyldiphenylimidazoline-2-one bidentate ligands (DPTI) spanning the Rh(II)-Rh(II) metallic center in a structure that was determined by single-crystal X-ray diffraction analysis. A rational mechanism is advanced that provides a straightforward explanation for the enantioselectivity and absolute stereochemical course of the [2 + 1]-cycloaddition reactions. A key element in this explanation is the cleavage of one of the Rh-O bonds of the bridging acetate group in the intermediate Rh-carbene complex to form a new pentacoordinate Rh carbene complex (formally 1.5 valent Rh) that can undergo [2 + 2]-cycloaddition with the C-C pi-bond of the acetylenic or olefinic substrate. Reductive elimination of the resulting adduct affords the cyclopropene or cyclopropane product. The C2-symmetry of the two DPTI ligands orthogonal to the bridging acetate also contributes to the high observed enantioselectivity and mechanistic clarity. The catalyst 1, which functions effectively at 0.5 mol %, can be recovered efficiently for reuse. Its ready availability, robustness, and effectiveness suggest it as a useful addition to the list of practical chiral Rh(II) catalysts for synthesis.     

The effect of solvent on the reactions of allyltin (IV) compounds with singlet oxygen, 4-phenyl-1,2,4-triazoline-3,5-dione and diethyl azodicarboxylate

The effect of the influence on the increase of polarity of the solvent on the selectivity and rate of metalloene reactions of different allyltin compounds with singlet oxygen, 4-phenyl-1,2,4-triazoline-3,5-dione (TD) and diethyl azodicarboxylate has been studied.     

[3+2]- Versus [4+2]-cycloaddition reactions of 3-methylsulfanyl-2-arylazo-3-(pyrrolidin-1-yl)acrylonitriles with N-substituted maleimides involving pyrrolidine-derived azomethine ylides

3-Methylsulfanyl-2-arylazo-3-(pyrrolidin-1-yl)acrylonitriles do not enter into [4+2]-cycloaddition reactions with maleimides to form the expected pyrrolo-pyridazines. Instead the formation of novel pyrrolo-pyridazines of type 4 takes place via a formal [3+2]-cycloaddition of initially formed pyrrolidine-derived azomethine ylides 7. The mechanism leading to the final product is discussed.     

Sustainable photochemistry: solvent-free singlet oxygen-photooxygenation of organic substrates embedded in porphyrin-loaded polystyrene beads

A solvent-free photooxygenation process that uses organic substrates embedded in porphyrin-loaded polystyrene beads as solid support is described and applied for ene- and [4 + 2]-cycloaddition reactions involving singlet oxygen (1 delta g).     

Computational study of carbon atom (3P and 1D) reaction with CH2O. Theoretical evaluation of 1B1 methylene production by C (1D)

Singlet and triplet free energy surfaces for the reactions of C atom ((3)P and (1)D) with CH(2)O are studied computationally to evaluate the excited singlet ((1)B(1)) methylene formation from deoxygenation of CH(2)O by C ((1)D) atom as suggested by Shevlin et al. Carbon atoms can react by addition to the oxygen lone pair or to the C=O double bond on both the triplet and singlet surfaces. Triplet C ((3)P) atoms will deoxygenate to give CO plus CH(2) ((3)B(1)) as the major products, while singlet C ((1)D) reactions will form ketene and CO plus CH(2) ((1)A(1)). No definitive evidence of the formation of excited singlet ((1)B(1)) methylene was found on the singlet free energy surface. A conical intersection between the (1)A' and (1)A' ' surfaces located near an exit channel may play a role in product formation. The suggested (1)B(1) state of methylene may form via the (1)A' ' surface only if dynamic effects are important. In an effort to interpret experimental observation of products trapped by (Z)-2-butene, formation of cis- and trans-1,2-dimethylcyclopropane is studied computationally. The results suggests that "hot" ketene may react with (Z)-2-butene nonstereospecifically.     

Kinetics, products, and stereochemistry of the reaction of chlorine atoms with cis- and trans-2-butene in 10-700 Torr of N2 or N2/O2 diluent at 297 K

The reactions of Cl atoms with cis- and trans-2-butene have been studied using FTIR and GC analyses. The rate constant of the reaction was measured using the relative rate technique. Rate constants for the cis and trans isomers are indistinguishable over the pressure range 10-900 Torr of N2 or air and agree well with previous measurements at 760 Torr. Product yields for the reaction of cis-2-butene with Cl in N2 at 700 Torr are meso-2,3-dichlorobutane (47%), DL-2,3-dichlorobutane (18%), 3-chloro-1-butene (13%), cis-1-chloro-2-butene (13%), trans-1-chloro-2-butene (2%), and trans-2-butene (8%). The yields of these products depend on the total pressure. For trans-2-butene, the product yields are as follows: meso-2,3-dichlorobutane (48%), dl-2,3-dichlorobutane (17%), 3-chloro-1-butene (12%), cis-1-chloro-2-butene (2%), trans-1-chloro-2-butene (16%), and cis-2-butene (2%). The products are formed via addition, addition-elimination from a chemically activated adduct, and abstraction reactions. These reactions form (1) the stabilized 3-chloro-2-butyl radical, (2) the chemically activated 3-chloro-2-butyl radical, and (3) the methylallyl radical. These radicals subsequently react with Cl2 to form the products via a proposed chemical mechanism, which is discussed herein. This is the first detailed study of stereochemical effects on the products of a gas-phase Cl+olefin reaction. FTIR spectra (0.25 cm(-1) resolution) of meso- and DL-2,3-dichlorobutane are presented. The relative rate technique was used (at 900 Torr and 297 K) to measure: k(Cl + 3-chloro-1-butene) = (2.1 +/- 0.4) x 10(-10), k(Cl + 1-chloro-2-butene) = (2.2 +/- 0.4) x 10(-10), and k(Cl + 2,3-dichlorobutane) = (1.1 +/- 0.2) x 10(-11) cm3 molecule(-1) s(-1).     

Photooxidation of olefins sensitized by bisazafullerene (C(59)N)(2) and hydroazafullerene C(59)HN: product analysis, emission of singlet oxygen, and transient absorption spectroscopy.

The photooxidation reactions of olefins sensitized by the excited triplet states of bisazafullerene (C(59)N)(2) and hydroazafullerene C(59)HN have been studied. Oxidation yields were compared with those of pristine C(60). The singlet oxygen yields are also determined directly from the emission intensities, which are in good agreement with the oxidation yields. The triplet states of (C(59)N)(2) and C(59)HN have been identified by the time-resolved spectroscopic method by observing the triplet-triplet absorption spectra, which decay in the presence of oxygen. It has been proven that (C(59)N)(2) and C(59)HN have the ability to sensitize the reactions via singlet oxygen in about half of the efficiency of that of pristine C(60). For both azafullerenes, the triplet lifetimes are shorter than that of pristine C(60), which may be related to the nitrogen atom embedded in the C(60) moiety.     

Thermal chemistry of C4 hydrocarbons on Pt(111): Mechanism for double-bond isomerization

The thermal chemistry of a number of C4 hydrocarbons (1,3-butadiene, 1-bromo-3-butene, 1-bromo-2-butene, trans-2-butene, cis-2-butene, 1-butene, 2-iodobutane, 1-iodobutane, and butane) was investigated on clean and hydrogen- and deuterium-predosed Pt(111) single-crystal surfaces by temperature-programmed desorption and reflection-absorption infrared spectroscopy. A combination of rapid beta-hydride eliminations from alkyls to olefins and the reverse insertions of those olefins into metal-hydrogen bonds explains the hydrogenation, dehydrogenation, and H-D exchange products that desorb from the surface. A preference for hydrogenation at the end carbons and dehydrogenation from the inner carbons also explains the extent of the isotope exchange and the preferential isomerization of 1-butene to 2-butene observed on this Pt(111) surface. The reactions of more dehydrogenated C4 species is also discussed.     

Photochemical reactions of 7-aminocoumarins. 2. [2 + 2]-cycloadducts with styrene

The photocycloaddition of styrene to 4-methyl-7-aminocoumarin, 4-methyl-7-diethylaminocoumarin, 7-(N-morpholino) coumarin, 3-ethoxycarbonylmethyl-4-methyl-7-diethylaminocoumarin, and coumarin-102 (2,3,6,7-tetrahydro-9-methyl-1H, 5H,11H-[l]-benzopyrano[6,7,8-ij] quinolizin-11-one) was investigated. Adducts of regio- and stereospecific [2 + 2]-cycloaddition to the 3–4 bond were isolated. It was established by means of x-ray diffraction analysis that the phenyl group in the cycloadducts occupies the 1-endo position. The participation of the singlet excited states of the 7-aminocoumarin molecules in [2 + 2]-cycloaddition was demonstrated.See [1] for Communication 1.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 9, pp. 1176–1184, September, 1988.     

Combining bifunctional chelator with (3 + 2)-cycloaddition approaches: synthesis of dual-function technetium complexes

A new concept for the synthesis of dual-functionalized technetium (Tc) compounds is presented, on the basis of the reactivity of fac-{Tc(VII)O(3)}(+) complexes. The concept combines the "classical" bifunctional chelator (BFC) approach with the new ligand centered labeling strategy of fac-{TcO(3)}(+) complexes with alkenes ((3 + 2)-cycloaddition approach). To evidence this concept, fac-{(99)TcO(3)}(+) model complexes containing functionalized 1,4,7-triazacyclononane (tacn) derivatives N-benzyl-2-(1,4,7-triazonan-1-yl)acetamide (tacn-ba) and 2,2',2″-(1,4,7-triazonane-1,4,7-triyl)triacetic acid (nota·3H) were synthesized and characterized. Whereas [(99)TcO(3)(tacn-ba)](+) [2](+) can be synthesized following a established oxidation procedure starting from the Tc(V) complex [(99)TcO(glyc)(tacn-ba)](+) [1](+), a new synthetic pathway for the synthesis of [(99)TcO(3)(nota)](2-) [5](2-) had to be developed, starting from [(99)Tc(nota·3H)(CO)(3)](+) [4](+) and using sodium perborate tetrahydrate (NaBO(3)·4H(2)O) as oxidizing reagent. While [(99)TcO(3)(nota)](2-) [5](2-) is a very attractive candidate for the development of trisubstituted novel multifunctional radioprobes, (3 + 2)-cycloaddition reactions of [(99)TcO(3)(tacn-ba)](+) [2](+) with 4-vinylbenzenesulfonate (styrene-SO(3)(-)) demonstrated the suitability of monosubstituted tacn derivatives for the new mixed "BFC-(3 + 2)-cycloaddition" approach. Kinetic studies of this reaction lead to the conclusion that the alteration of the electronic structure of the nitrogen donors by, e.g., alkylation can be used to tune the rate of the (3 + 2)-cycloaddition.     

A comparison of hydrogen bonding solvent effects on the singlet oxygen reactions of allyl and vinyl sulfides, sulfoxides, and sulfones

The singlet oxygen (¹Δ_g) photooxidations of 2-methyl-3-phenylthio-2-butene (1a), 1-[(4-nitrophenyl)thio]-2,3-dimethyl-2-butene (2c), 2-methyl-3-phenylsulfinyl-2-butene (3), 2-methyl-3-phenylsulfonyl-2-butene (6), and 1-[(4-nitrophenyl)sulfonyl]-2,3-dimethyl-2-butene (7c) were conducted in the following deuterated solvents: acetonitrile, benzene, chloroform, methanol, or methanol/water mixture. In each case the ene allylic hydroperoxide products and/or the [2+2] cycloaddition products were quantified and inspected for possible hydrogen bonding induced differences in product selectivity and regiochemistry. After comparison to literature values for related substrates, the results indicate that only photooxidations of vinyl sulfides are susceptible to hydrogen bonding solvent effects.     

Silylenolether als 2π-komponenten in (4 + 2)-cycloadditionen: Präparative und kinetische ergebnisse

Easily accessible open chain and cyclic silyl enolethers show dienophilic reactivity in (4 + 2)-cycloaddition reactions with inverse electron demand equivalent to enol ethers. Preparative and kinetic results are reported.     

Photooxygenation of tetramethylallene competing (2+2) cycloaddition and ene-reactions with singlet oxygen

TPP-sensitized photooxygenation of tetramethylallene (4) in carbon tetrachloride yields acetone (5), 2,4-dimethyl-4-hydroxy-1-penten-3-one (8) and 2,4-dimethyl-1,4-pentadien-3-one (9) in a ratio of 35:20:45, besides minor amounts of resinous products and carbon dioxide. Isomerization of 4 to 2,4-dimethyl-1,3-pentadiene (6) does not occur under the reaction conditions. DABCO quenches the photooxygenation, whereas 2,4,6-tri-t-butylphenol (10) enhances the oxygen consumption rate but leaves the ratio of 5:8:9 unchanged. These results indicate that 4 is oxygenated by singlet oxygen. A mechanism is proposed according to which acetone is generated via a (2+2) cycloaddition whereas 8 and 9 are formed via an ene-reaction between 4 and singlet oxygen.     

Charge-transfer interactions,exciplex formations and ionic dissociations in singlet oxygen reactions

Intermolecular perturbation and configuration interaction calculations have been carried out to elucidate the attacking modes of singlet molecular oxygen (¹O₂) to allyl olefins and electron-rich olefins, which are classified into four groups from their molecular structures. It is found: (1) that the attacking modes are dependent on the molecular structure of substrates ; (2) that the charge-transfer (CT) interactions between ¹O₂ and substrates are particularly important for the formation of exciplexes through which the ene and (2+2) reactions of ¹O₂ proceed ; and (3) that the CT energy levels are important in governing the fraction of ionic dissociation to produce Superoxide anion and the relative ratio between the (4+2) and (2+2) reactions of ¹O₂ with dienes, heterocycles and related species.     

Mechanism of an alcohol-trapping reaction in the direct and benzophenone-sensitized photodenitrogenation of a spiroepoxy-substituted azoalkane: solvent effects and stereochemical deuterium labeling

The spin-state-dependent reactivity, singlet versus triplet, of the 2-spiroepoxy-1,3-cyclopentane-1,3-diyl DR2 has been assessed through alcohol-trapping reactions for which the effect of solvent acidity on the product distribution of the alcohol trapping products 2 versus 3 + 4 and stereochemical deuterium-labeling studies have been performed. The proposed mechanism for the solvent effect on the product ratio (2/3 + 4) reveals the importance of the hydrogen-bonded intermediates I1 and I2 in the trapping reactions; the stereochemical deuterium-labeling results clarify the dipole structure trapped by the alcohol. The dipoles DP1 and DP2, in which the configuration between the epoxide oxygen and the deuterium atoms is retained, are inferred for the direct photodenitrogenation reactions (singlet state), whereas for the benzophenone-sensitized photoreactions (triplet state), after ISC, the ring-opened dipole DP3 is implied as the intermediate that is trapped by the alcohol.