Studies on ceric–thiol-initiated aqueous vinyl polymerization with particular reference to end groups in poly(methyl methacrylate)

Ceric-thiol systems are good initiators for the acid aqueous polymerization of some water-soluble Vinyl monomers although not for styrene (in aqueous emulsion) and vinyl acetate. Thiols used are 2-mercaptoethanol, thioglycolic acid, 2-mercaptoethylamine hydrochloride, and L -cysteine hydrochloride. The polymerization proceeds through a radical mechanism. End-group analysis of poly(methyl methacrylate) obtained by initiation with various ceric-thiol systems has been carried out using Palit's dye testes. Hydroxyl, carboxyl, and amine end groups (to the extent of about one per polymer molecule) were incorporated in poly(methyl methacrylate)s obtained by initiation with 2-mercaptoethanol, thioglycolic acid, and 2-mercaptoethylamine hydrochloride, respectively, each in combination with Ce⁴⁺ ions; both amine and carboxyl end groups were obtained using C⁴⁺/L -cysteine hydrochloride initiator system. From the end-group results, the initiating species have been identified and the initiation mechanism prooposed. The probable termination mechanism also has been discussed.     

通过自缩合乙烯基氧阴离子聚合制备超支化聚甲基丙烯酸羟丙酯

由甲基丙烯酸羟丙酯通过自缩合乙烯基氧阴离子聚合(self-condensing vinyl oxyanionic polymerization)制备了端羟基的超支化聚甲基丙烯酸酯. 以氢化钾(KH)和冠醚的复合物为引发剂时, 可以得到高分子量的聚合物. 用¹H NMR和¹³C NMR谱图证实了聚合物的超支化结构. 由于在聚合过程中存在质子转移反应, 引发剂与单体的摩尔比会影响所得聚合物的结构. 超支化聚合物的玻璃化转变温度在58.1～81.4 ℃之间, 且随着引发剂与单体的比例的减小而降低. 当引发剂与单体等摩尔比时, 所得聚合物的支化度为0.49.     

First example of N-heterocyclic carbenes as catalysts for living polymerization: organocatalytic ring-opening polymerization of cyclic esters

A novel metal-free, organocatalytic approach to living polymerization is presented. N-heterocyclic carbenes were employed as nucleophilic catalysts for the ring-opening polymerization (ROP) of cyclic ester monomers. The catalysts is used in combination with an initiator, such as an alcohol, which generates an alpha-end group bearing the ester from the initiating alcohol upon ring-opening and a hydroxyl functional omega-chain end that propagates the chain. This class of catalyst proved to be more reactive than tertiary amine and phosphine nucleophiles, producing narrowly dispersed polymers of predictable molecular weights at room temperature in 1-2 h. Catalysis with respect to both initiating alcohol and monomer was observed. Control of the alpha and omega end-groups was demonstrated with a pyrene-labeled initiator, allowing the preparation of well-defined macromolecular architectures. Analogous to the ROP of cyclic esters using biocatalysts, the polymeriztion pathway using the N-heterocyclic carbenes is believed to ensue through a monomer-activated mechanism.     

Novel substituted epoxide initiators for the carbocationic polymerization of isobutylene

This article presents the first detailed account of the discovery that substituted epoxides can initiate the carbocationic polymerization of isobutylene. α‐Methylstyrene epoxide (MSE), 2,4,4‐trimethyl‐pentyl‐epoxide‐1,2 (TMPO‐1), 2,4,4‐trimethyl‐pentyl‐epoxide‐2,3 (TMPO‐2), and hexaepoxi squalene (HES) initiated isobutylene polymerization in conjunction with TiCl₄. MSE, TMPO‐2, and HES initiated living polymerizations. A competitive reaction mechanism is proposed for the initiation and propagation. According to the proposed mechanism, initiator efficiency is defined by the competition between the S_N1 and S_N2 reaction paths. A controlled initiation with external epoxides such as MSE should yield a primary hydroxyl head group and a tert‐chloride end‐group. The presence of tert‐chloride end‐groups was verified by NMR spectroscopy, whereas the presence of primary hydroxyl groups was implied by model experiments. Multiple initiation by HES was verified by diphenyl ethylene end‐capping and NMR analysis; the resulting star polymer had an average of 5.2 arms per molecule. A detailed investigation of the reaction mechanism and the characterization of the polymers are in progress. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 444–452, 2000     

Mechanistic studies on ceric-amine initiated aqueous polymerization of methylmethacrylate by endgroup analysis

Summary Endgroup analysis of polymethylmethacrylate obtained by initiation with Ceric ion-amine initiator systems in acid aqueous media has been carried out using Palit's dye partition technique. The amines used are diethylamine, triethylamine, mono-ethanolamine, diethanol amine and triethanol amine and also ethylene diamine. All the amines incorporated amine endgroups in the polymer samples to the extent of approximately one endgroup per chain, except ethylene diamine which incorporated approximately two amine endgroups per macromolecule. Besides amine endgroups, the three ethanol amines incorporated hydroxyl endgroups to different extents depending on the hydroxyl content of the particular compound. In the light of endgroup results initiation through amine, ethylene diamine or ethanol amine radicals have been suggested. Probable termination mechanism has also been discussed.With 3 tables     

Synthesis of Reactive-Ended Acrylic Polymers by Group Transfer Polymerization: Initiation with Silyl Ketene Acetals

Living methacrylate polymers are obtained at room temperature and above by initiation with ketene silyl acetals in the presence of a soluble bifluoride catalyst. During the polymerization, a trialkylsilyl group is transferred from the living chain end to incoming monomer. The new procedure has thus been named group transfer polymerization (GTP). Monodisperse polymers with predetermined molecular weights as high as 100,000 can be obtained by adjusting the monomer/initiator ratio. Telechelic poly(methyl methacrylate) with hydroxy or carboxy ends can be obtained by using an initiator containing a protected hydroxy or carboxy group and coupling the resulting living polymer.     

Cross‐linking photopolymerization of monoacrylate initiated by benzophenone

The chain‐end structure of the photopolymerized acrylate using benzophenone as an initiator was investigated as well as polymerization behavior. Dodecyl acrylate was used as a monomer in this study. Gelation occurred during ultraviolet (UV) irradiation, whereas a cross‐linker was not employed. Conversion‐time profile below gel point gave a linear first‐order plot suggesting that the steady‐state was held throughout polymerization. Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectra of the resultant polymer indicated that most polymers had an acryloyl group at one of the chain‐ends, while some polymers had an acryloyl group at each chain‐end. The cross‐linking reaction leading to gelation would have been caused by the subsequent copolymerization of the residual monomer with the latter polymer having two acryloyl groups. Dissolved oxygen in the monomer solution influenced the polymer structure giving hydroxyl group at chain‐end. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1545–1553     

Cyclic amine initiation of polypivalolactone

Certain monocyclic and polycyclic tertiary amines initiate polymerization of, and copolymerize with, pivalolactone. These comprise three-, four-, and five-membered monocyclic amines and 1-azapolycyclic amines. The polymerization proceeds in three steps: (a) initiation to form a cyclic amine/pivalate betaine, (b) propagation to yield a polylactone zwitterion by an anionic mechanism, and (c) interlinking by a carboxylate end attacking a cyclic amine end to incorporate amine as a comonomer in the chain. When polymerization is carried out at low temperatures, the more stable cyclic amine ring systems yield isolatable step b polymers. These polymeric zwitterions undergo step c by heating, even in the solid state. The mechanism suggests that, for the more labile cyclic amines, a lactone could be the initiator for polyamine formation by a cationic mechanism. Interlinking would lead to incorporation of lactone initiator. In intermediate cases, block copolymers would result. With a proper balance of reactivities, 1:1 alternating copolymers would be possible.     

(n-BuCp)_2TiCl_2/Sn/I_s引发合成梳形羟基功能化无规聚苯乙烯及聚合物结构与性能的研究

采用茂金属化合物(n-BuCp)2TiCl2,还原剂(Sn),引发剂苯基缩水甘油基醚甲醛共聚物(Is)组成的催化体系引发苯乙烯活性自由基聚合,合成梳形羟基功能化无规聚苯乙烯.考察了聚合温度、聚合时间及引发剂与单体的比例对苯乙烯聚合的影响.当聚合温度在65～95℃范围内,随着聚合温度的升高,聚合物的分子量及单体转化率增加;在一定温度下,聚合物的分子量与单体转化率之间存在线性增长关系,且聚合物的分子量分布较窄(Mw/Mn=1.6～1.9).采用GPC,WAXD,13C(1H)-NMR对聚合物(沸丁酮可溶级分)的结构与性能进行了表征.GPC结果证明(n-BuCp)2TiCl2/Sn/Is引发苯乙烯聚合为活性聚合;13C-NMR和WAXD结果说明聚苯乙烯链段为无规结构;1H-NMR结果表明聚合物分子链中含有羟基,并根据其结果计算出聚合物分子的臂数为4,与引发剂Is的环氧基团数相等.这些结果证明了其聚合机理是经环氧基团开环后形成的自由基引发苯乙烯自由基聚合.     

Synthesis of polymers with hydroxyl end groups by atom transfer radical polymerization

Polymers prepared by atom transfer radical polymerization (ATRP) contain end groups defined by the initiator used. Alkyl halides, used as initiators, lead to polymers with an alkyl group at one end and a halide as the other chain end. Using functionalized initiators such as 2‐hydroxyethyl 2‐bromopropionate, hydroxyl groups can be directly incorporated at one polymer chain end while the other end functionality remains a halogen. The direct displacement of the halogen end groups with hydroxyl groups was unsuccessful due to side reactions such as elimination (for polystyrene) or hydrolysis of ester functions (for polyacrylate). Another approach to generate hydroxyl end groups was based on the substitution of the halogen end groups by ethanolamine. This was successful for polystyrene but additional substitution at the backbone esters was observed in polyacrylates. Multiple substitution reactions could be avoided by using 4‐aminobutanol instead of 2‐aminoethanol. Hydroxyl terminated polyacrylates were also obtained by extending the polyacrylate chain end with one allyl alcohol unit in a one‐pot process by adding an excess of allyl alcohol at the end of e polymerization of acrylate.     

Functionalization of hydrogen-terminated silicon via surface-initiated atom-transfer radical polymerization and derivatization of the polymer brushes

Surface-initiated atom-transfer radical polymerization (ATRP) of poly(ethylene glycol) monomethacrylate (PEGMA) was carried out on the hydrogen-terminated Si(100) substrates with surface-tethered alpha-bromoester initiator. Kinetic studies confirmed an approximately linear increase in polymer film thickness with reaction time, indicating that chain growth from the surface was a controlled "living" process. The "living" character of the surface-grafted PEGMA chains was further ascertained by the subsequent extension of these graft chains, and thus the graft layer. Well-defined polymer brushes of near 100 nm in thickness were grafted on the Si(100) surface in 8 h under ambient temperature in an aqueous medium. The hydroxyl end groups of the poly(ethylene glycol) (PEG) side chains of the grafted PEGMA polymer were derivatized into various functional groups, including chloride, amine, aldehyde, and carboxylic acid groups. The surface-functionalized silicon substrates were characterized by reflectance FT-IR spectroscopy and X-ray photoelectron spectroscopy (XPS). Covalent attachment and derivatization of the well-defined PEGMA polymer brushes can broaden considerably the functionality of single-crystal silicon surfaces.     

Polymerization of α-amino acid N-carboxy anhydrides initiated by histamine in N,N-dimethylformamide

The polymerization of α-amino acid N-carboxy anhydrides (NCAs) initiated by 4-aminoethylimidazole (histamine) was studied in order to synthesize poly(amino acids) containing an imidazole nucleus at the end of polymer chain. On the basis of the kinetical measurements, it was found that the rate of polymerization is proportional to the first order in both NCA and initiator concentrations and that the initiation reaction is predominantly caused by the primary amine with the highest basicity in a histamine molecule. Binding of the histamine fragment to the end of polymer chain was confirmed by elementary analysis, nuclear magnetic resonance spectroscopy, and measuring the number-average molecular weight of the resulting polymers. It was thus possible to prepare poly(amino acids) with a pendant histamine. In addition, the lowering of the number-average degree of polymerization of the polymers prepared was observed under the condition that the initial molar ratio of NCA to histamine was larger. It was caused by the reinitiation of polymerization by the imidazole nucleus at the chain end.     

Synthesis and characterization of telechelic polymethacrylates via RAFT polymerization

The reversible addition–fragmentation chain transfer (RAFT) polymerization technique has been employed to synthesize linear α,ω ‐telechelic polymers with either hydroxyl or carboxyl end groups. Methyl methacrylate, butyl methacrylate, and butyl acrylate were polymerized with RAFT polymerization. The polymerizations exhibited the usual characteristics of living processes. Telechelic polymethacrylates were obtained from a hydroxyl monofunctional RAFT polymer with a two‐step chain‐end modification procedure of the dithioester end group. The procedure consisted of an aminolysis followed by a Michael addition on the resulting thiol. The different steps of the procedure were followed by detailed analysis. It was found that this route was always accompanied by side reactions, resulting in disulfides and hydrogen‐terminated polymer chains as side products next to the hydroxyl‐terminated telechelic polymers. Telechelic poly(butyl acrylates) with carboxyl end groups were produced in a single step procedure with difunctional trithiocarbonates as RAFT agents. The high yield in terms of end group functionality was confirmed by a new critical‐liquid‐chromatography method, in which the polymers were separated based on acid‐functionality and by mass spectrometry analysis. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 959–973, 2005     

Haloaldehyde Polymers. XIV. Endgroups in Polychloral

Chloral polymers prepared by anionic polymerization have alkoxide endgroups as terminal ends at the end of this polymerization. The initiating anion has, as expected, no influence on the type of terminal group formed. Polychloral with terminal alkoxide ends degrades easily thermally to monomeric chloral. Alkoxide endgroups in polychloral do not readily react with alkylating or acylating agents, although partial stabilization has been observed when alkoxide-terminated polymers were allowed to stand for periods of time; the endgroups seem to react either with impurities or with excess chloral in side reactions. With protic acids, alkoxide-terminated polychloral is transformed into hydroxyl-terminated polymer of higher thermal stability. Studies of the initiation step of the chloral polymerization revealed that above the ceiling temperature of polymerization, strong nucleophiles, such as soluble tertiary butoxide, initiate quantitatively, but polymerization does not proceed until the mixture is cooled. When chloral is initiated with weaker nucleophiles such as chloride or carboxylates, the initiation equilibrium is not on the side of the initiated species, although it shifts effectively as polymerization proceeds; with carboxylates as initiators the ester group has been found incorporated as the initial endgroup in polychloral. With sufficient amounts of lithium tertiary butoxide as anionic initiator, polychloral of low molecular weight was prepared. This polymer does not react with end-capping reagents (other than PCl₅) as does high molecular weight polychloral; in spite of considerable effort it was not possible to prepare low molecular weight soluble polychloral or oligomeric polychloral. Polychloral prepared with cationic initiators is thermally more stable than unstabilized anionically initiated polychloral but is generally crumbly and incoherent. The end-groups of such polymers are usually hydroxyl endgroups. Identification of endgroups of the polymers has been done where possible by IR spectroscopy, for the initiation reaction by NMR spectroscopy, but for high molecular weight insoluble polymers almost exclusively by comparative thermal polymer degradation.     

Synthesis and characterization of polymethacrylate-based nitric oxide donors

A synthetic path for the preparation of methacrylic homo- and copolymers containing secondary amine groups that can be converted into nitric oxide (NO) releasing N-diazeniumdiolates is described. The polymers are obtained by a multistep procedure involving synthesis of methacrylate monomers containing boc-protected secondary amine sites, free radical benzoyl peroxide initiated polymerization, deprotection of the amine sites, and subsequent reaction of the polymers with NO in the presence of sodium methoxide. Monomers with both linear and cyclic pendant secondary amines are examined as polymer building blocks. In most cases, polymers are obtained for both types with compositions that agree well with initial monomer ratios and with number average molecular weights (M(n)) ranging from 1.69 to 2.58 x 10(6) Da. The final N-diazeniumdiolated methacrylic amine polymers are shown to release NO for extended periods of time with "apparent" t(1/2) values ranging from 30 to 60 min when suspended in phosphate buffer, pH 7.4. Total NO loading and release for these materials can reach 1.99 micromol per mg of polymer and is proportional to the amine content of the polymer. It is further shown that by using a dimethacrylate cross-linking agent in conjunction with the various methacrylate amines, suspension polymerization methods can be employed to create small (100-200 microm) polymeric methacrylate microbeads. Such microbeads that can be sequentially deprotected and converted to NO release particles via in-situ diazeniumdiolate formation as carried out for the non-crosslinked polymers.     

Layered Dendritic Block Copolymers

A star-shaped molecule and a layered structure are displayed by the title compound, where the layers consist of high molecular weight polymers. A core molecule that is functionalized by six hydroxyl groups acts as the initiator for the ring-opening polymerization of ε-caprolactone, leading to a six-arm star polymer. The second layer of the dendritic block copolymer with 12, 24, or 48 hydroxyl groups (depending on the dendron generation in use) is obtained by the linkage of chain ends with functionalized dendrons. These macromoleculse act as “macroinitiators” for the construction of a further layer of poly(ε-caprolatone), the third generation of dendritic block copolymers.     

Melt block copolymerization of ϵ-caprolactone and L-lactide

AB block copolymers of ϵ-caprolactone and (L )-lactide could be prepared by ring-opening polymerization in the melt at 110°C using stannous octoate as a catalyst and ethanol as an initiator provided ϵ-caprolactone was polymerized first. Ethanol initiated the polymerization of ϵ-caprolactone producing a polymer with ϵ-caprolactone derived hydroxyl end groups which after addition of L -lactide in the second step of the polymerization initiated the ring-opening copolymerization of L -lactide. The number-average molecular weights of the poly(ϵ-caprolactone) blocks varied from 1.5 to 5.2 × 10³, while those of the poly(L -lactide) blocks ranged from 17.4 to 49.7 × 10³. The polydispersities of the block copolymers varied from 1.16 to 1.27. The number-average molecular weights of the polymers were controlled by the monomer/hydroxyl group ratio, and were independent on the monomer/stannous octoate ratio within the range of experimental conditions studied. When L -lactide was polymerized first, followed by copolymerization of ϵ-caprolactone, random copolymers were obtained. The formation of random copolymers was attributed to the occurrence of transesterification reactions. These side reactions were caused by the ϵ-caprolactone derived hydroxyl end groups generated during the copolymerization of ϵ-caprolactone with pre-polymers of L -lactide. The polymerization proceeds through an ester alcoholysis reaction mechanism, in which the stannous octoate activated ester groups of the monomers react with hydroxyl groups. © 1997 John Wiley & Sons, Inc.     

Optimal ATRP‐Made Soluble Polymer Supports for Phosphoramidite Chemistry

Soluble polystyrene supports with optimal molecular structures for iterative phosphoramidite chemistry were prepared by atom‐transfer radical polymerization (ATRP) and subsequent chain‐end modification steps. The controlled radical polymerization of styrene was first performed in the presence of an 9‐fluorenylmethoxycarbonyl (Fmoc)‐protected amino‐functional ATRP initiator. Soluble supports of different molecular weight were prepared. Size‐exclusion chromatography and NMR analysis indicated formation of well‐defined polymers with controlled chain lengths and narrow dispersity. After synthesis, the bromo ω end group of the ATRP polymer was removed by dehalogenation in the presence of tributyltin hydride, and the Fmoc protecting group of the α moiety was subsequently cleaved with piperidine. The resulting α‐primary amine was afterwards treated with a linker containing a carboxyl group, a cleavable ester site, and a dimethoxytrityl‐protected hydroxyl group to afford ideal soluble supports for phosphoramidite chemistry. NMR analysis indicated that these chain‐end modifications were quantitative. The supports were tested for the synthesis of a non‐natural sequence‐defined oligophosphates. High‐resolution ESI‐MS analysis of the cleaved oligomers indicated formation of uniform species, and thus confirmed the efficiency of the ATRP‐made soluble polymer supports. In addition, the synthesis of a thymidine‐loaded soluble support was achieved.     

Complexing effect of N-hydroxyphthalimides in the stereospecific polymerization of methyl methacrylate

A study was carried out on the effect of both the temperature of the reaction medium and structure of the initiator (N-hydroxyphthalimides) on the tacticity of the polymethyl methacrylate obtained under radical polymerization conditions. An increase in the amount of hydroxyl groups in the N-hydroxyphthalimide (NHPI) molecule leads to an increase in syndiotactic sequences in the macromolecule. The Fordham equation was used to calculate the differences in the activation enthalpies and entropies for addition in the iso and syndio positions in the presence of various N-hydroxyphthalimides. In all cases, formation of a syndiotactic polymer is favored.     

Double Modification of Polymer End Groups through Thiolactone Chemistry

A straightforward synthetic procedure for the double modification and polymer–polymer conjugation of telechelic polymers is performed through amine‐thiol‐ene conjugation. Thiolactone end‐functionalized polymers are prepared via two different methods, through controlled radical polymerization of a thiolactone‐containing initiator, or by modification of available end‐functionalized polymers. Next, these different linear polymers are treated with a variety of amine/acrylate‐combinations in a one‐pot procedure, creating a library of tailored end‐functionalized polymers. End group conversions are monitored via SEC, NMR, and MALDI‐TOF analysis, confirming the quantitative modification after each step. Finally, this strategy is applied for the synthesis of block copolymers via polymer–polymer conjugation and the successful outcome is analyzed via LCxSEC measurements.