多孔微结构光纤中飞秒激光脉冲超连续谱的产生

报道了利用800nm飞秒激光脉冲在多孔微结构光纤中产生超连续谱展宽的现象，连续谱展宽范围为440—890nm.基于标量波近似理论对微结构光纤包层的有效折射率和基模的有效面积以及光纤的色散特性进行了计算，发现微结构光纤具有特殊的控制色散和波导特性的能力，对超连续谱展宽的机理进行了初步解释.本文的理论分析和实验结果有较好的一致性，认为即使包层由无序填充气线组成的多孔微结构光纤也可以出现超连续谱展宽效应. 关键词： 多孔微结构光纤 超连续谱 有效折射率 色散     

Highly polarization-dependent periodic coupling in mechanically induced long period grating over air-silica fibers

A very flexible and versatile tunable mechanical grating platform is introduced, with which highly polarization-dependent mode coupling is observed for three types of air-silica microstructured fibers: hollow core fiber, hexagonal-boundary holey fiber (HHF), and circular-boundary holey fiber. The resonances of gratings showed highly polarization-dependent broadband coupling compared with conventional single-mode fibers due to their unique beat-length dispersions between the core and the cladding modes, which could find applications in wideband polarization-dependent loss compensation. We further present significance of the spatial symmetry of HHF in distinct mode coupling for different rotation angles around the fiber axis.     

Characteristics of holey fibers fabricated at different drawing speeds

The effects of high drawing speeds on parameters of holey fibers are presented. A holey fiber preform structure was made by using tube-in-tube method and was drawn at high speeds with an aim of mass production to meet the demand of next generation communication systems. Transmission parameters such as numerical aperture and normalized frequency of the fabricated holey fibers have been measured and compared with theoretical values based on effective index method. Although the fabricated holey fibers were not of high quality, the analyses of the parameters have shown promising outlook for fabrication of such fibers.     

Coupling and decoupling of dual-core photonic bandgap fibers

Coupling characteristics of dual-core photonic bandgap fibers with triangular photonic crystal cladding are investigated by use of a vector plane-wave expansion method and a vector finite-element method. We demonstrate the eigenmodes and the coupling length for two orthogonal polarizations. A decoupling phenomenon is found at a certain wavelength in this fiber configuration. The decoupling effect is attributed to the effect of surface modes on the eigenmodes. The decoupling wavelength decreases as the ratio of core radius to cladding air-hole pitch increases from 1.05 to 1.15.     

Comparative study of large-mode holey and conventional fibers

Little information exists regarding how large-mode holey fibers compare, in practical terms, with their conventional counterparts. We present what is to our knowledge the first experimental study of mode area and bend loss for a range of large-mode holey and conventional fibers. It is demonstrated here that large-mode holey fibers exhibit mode areas and bending losses that are comparable to those of conventional fibers at 1.55mu . However, the novel wavelength dependence of the numerical aperture in a holey fiber offers a significant advantage for broadband and short-wavelength applications in which single-mode operation is required.     

Fabrication of low OH loss holey fibers with varying air hole sizes and their optical properties

We experimentally investigate a flexible fabrication technique for low OH and transmission losses holey fibers with a Ge-doped core and air holes in a silica cladding region. Versatile holey fibers of different size, pitch, and shape of air holes were achieved by controlling the temperature and heating time of the holey fiber preform. In addition, we suppress the OH loss of less than ∼0.323 dB/km at 1383 nm. After fabricating holey fibers, we measure their optical properties including cut-off wavelength, mode field diameter, splicing loss, dispersion, bending loss, and polarization dependent loss based on the size of air holes. The total transmission loss was measured to be ∼0.226 dB/km at 1550 nm by improving the fabrication process. After fabricating optical patch cord based on holey fibers, we measured the long-term stability of the fabricated holey fiber by using the temperature cycling technique for 24 and obtained low power fluctuation of 0.2 dB. We achieve the high quality holey fiber with a low bending loss of ∼0.04 dB/turn under a bending radius of 2.5 mm at 1550 nm. We also obtain a tunable band rejection filter with a number of bending turns.     

Applicability of classical optical fiber theories to holey fibers

We discuss the applicability of well-established classical optical fiber theories to holey fibers. By appropriately defining the V parameter, we can easily estimate the fundamental properties of holey fibers, such as effective index, group-velocity dispersion, mode field diameter, beam divergence, and splice loss, through simple empirical expressions without the need for heavy numerical computations. We confirm the validity of the V parameter defined here by comparing the calculated results with the earlier experimental and numerical results.     

Structure of a nonparaxial gaussian beam near the focus: III. Stability,eigenmodes, and vortices

Exact analytical structurally stable solutions of the Maxwell equations for singular mode beams propagating in free space or a uniform isotropic medium are obtained. Approximate boundary conditions are chosen in the form of the requirement that in the paraxial approximation the fields of nonparaxial mode beams in the waist plane are transformed into the fields of eigenmodes and vortices of weakly guiding optical fibers with the axial symmetry of refractive index. It is shown that optical vortices, in spite of a rather complex structure of field distribution, do not experience substantial changes in the beam form and reproduce, in general features, the field of paraxial vortices. Linear perturbations of the characteristic parameters of mode beams do not change the structure of their electromagnetic field. Nonparaxial singular beams have one more important property, in addition to the fact that the structure of these beams in the paraxial approximation is similar to the structure of the fields of eigenmodes in a fiber. The propagation constants of eigenmodes of a fiber exactly coincide (in the first approximation of perturbation theory) with the projection of the wave vector of a mode beam on the optical axis (an analog of the propagation constant). The possibility of the paraxial transition for nonparaxial mode beams with arbitrary values of azimuthal and radial indices is shown. The properties of nonparaxial modes are illustrated by numerous examples. The solutions obtained and the results of their analysis can be used for exact matching optical fibers and laser beams in various applications.     

平面型四光纤耦合系统的研究

以线性耦合波方程为基础，导出了在弱熔情况下平面型四光纤耦合系统的传播常数、本征模以及功率耦合特性，并首次利用“熔拉”法研制成功了平面型四光纤耦合器，得到的耦合器谱响应实验结果与理论结果基本一致。     

Photonic-crystal fibers with a photonic band gap tunable within the range of 930–1030 nm

The physical principles of photonic-crystal fibers with a photonic band gap tunable in the visible and near-IR spectral ranges are demonstrated. Direct numerical integration of the Maxwell equations with the use of the finite-difference time-domain technique reveals the possibility of creating holey fibers with a photonic-crystal cladding whose photonic band gap lies within the frequency range characteristic of widespread solid-state femtosecond lasers. The fabrication of holey fibers with a pitch of the two-dimensional periodic structure of the cladding less than 500 nm allowed us to experimentally observe a photonic band gap in transmission spectra of holey fibers tunable within the range of 930–1030 nm. This photonic band gap is satisfactorily described within the framework of the proposed numerical approach based on the finite-difference time-domain method.     

Coupling of two defect modes in photonic crystal fibers

The coupling characteristics of two defect modes in photonic crystal fibers are investigated theoretically by the finite-difference time-domain (FDTD) method. The transmission spectrum and eigenmodes of optical wave are found to be very sensitive to the geometrical and physical parameters of the structure, as well as to the relative position of the two defects.     

Methods for calculating the temperature zero drift initiated in fiber ring interferometers by random inhomogeneities in single-mode optical fibers

The specific features of the existing methods used for calculating the temperature zero drift initiated in fiber ring interferometers (FRIs) by linear coupling between polarization eigenmodes at random inhomogeneities in single-mode optical fibers are analyzed. The ranges of applicability of each method are determined. It is demonstrated that numerical simulation with a variation in the temperature of the single-mode optical fiber of the FRI loop is the most complex and, at the same time, the most universal method.     

Applications of the finite difference mode solution method to photonic crystal structures

The finite difference waveguide mode solution method, which has been popularly employed in the study of waveguide modes on various optical and dielectric waveguides, is utilized to calculate the modal characteristics of photonic crystal fibers (PCFs) and planar photonic crystal waveguides and the band diagrams of two-dimensional photonic crystals. Vector guided modes on both PCFs based on the total internal reflection guiding mechanism ('holey fibers') and those resulting from photonic band gap effect are accurately computed, with their effective indexes and field distributions compared with other methods. Calculated dispersion of a single-core holey fiber and coupled-power behavior of a two-core holey fiber are found to agree with measured results. For applications to band diagram calculation and planar photonic crystal waveguide analysis, the finite difference scheme is modified simply by imposing suitable periodic boundary condition. Numerical results for air-column crystals and dielectric-rod crystals are both found to agree well with calculations using other methods.     

Holey fibers with random cladding distributions

We provide what is to our knowledge the first direct confirmation that light can be guided in a holey fiber with randomly distributed air holes in the cladding. We also show that many of the features previously attributed to periodic holey fibers, in particular, single-mode guidance at all wavelengths, can also be obtained with random holey fibers. We provide insight into exactly how sensitive a holey fiber's optical properties are to the details of the cladding profile.     

Birefringent photonic crystal fibers with zero polarimetric sensitivity to temperature

We designed, fabricated, and characterized birefringent holey fibers with zero polarimetric sensitivity to temperature. The sensitivity measurements were carried out in a wide spectral range of 0.68–1.55 μm in fibers with different hole and pitch values and with birefringence induced by a pair of large holes adjacent to the core. Our results show that zero sensitivity to temperature can be obtained at certain wavelengths for the bare fibers with properly adjusted geometrical parameters. Moreover, the spectral measurements of the sensitivity to temperature are in good agreement with the modeling results for all the investigated fibers.     

多芯光子晶体光纤优化掺杂分布实现同相位超模输出

本文基于多横模运转的传输速率方程,建立了多芯光子晶体光纤放大器的数值模型.利用分步傅里叶方法,分析了掺杂浓度分布、耦合强度、抽运功率对于放大器各模式输出功率的影响.通过对多芯光子晶体光纤掺杂浓度的阶梯设计和纤芯间耦合强度的优化,实现了无需插入其他外加元件,利用光纤本身特性就可以实现选定同相位超模的方法,并且数值计算表明高抽运功率也能够提高放大器输出同相位超模的比例,进一步优化了多芯光子晶体光纤放大器输出脉冲的光束质量.     

Coupling methods in prospective single-mode fiber integrated optics systems: A progress report

A review of the research progress on the coupling of fibers to fibers, fibers to thin-film waveguides, and thin-film waveguides to thin-film waveguides is presented here. In general, the direct excitation method is preferred for the coupling of two fibers, with efficiency larger than 90%. The direct excitation method is also preferred for the coupling of two thin-film waveguides and thin-film waveguides to fibers where the two component waveguides have vastly different refractive indices. The coupling efficiency depends on matching the field pattern of component waveguides. The laser source to fiber launching is done mostly by direct excitation. The evanescent field coupling method is preferred for the coupling of two thin-film waveguides that have close refractive index profiles, with efficiency larger than 70%.     

Generation of broadband femtosecond visible pulses in dispersion-micromanaged holey fibers

Submillimeter-scale dispersion micromanagement (DMM) is used to generate coherent and stable femtosecond visible pulses in holey fibers as short as 10 mm. The longitudinal variation of the phase-matching conditions for Cerenkov radiation and four-wave mixing explains the results well. We have converted up to 20% of the total input energy to a low-noise solitary wave with a bandwidth up to 50 nm in the range 385-625 nm by using holey fibers with various DMM designs.     

Generation of multiwatt, broadband continua in holey fibers

We demonstrate that 2-W average-fpower 310-nm-wide continua can be generated in holey fibers by use of a novel 6-W pump source at 770 nm. The pump source is demonstrated by use of the 64% efficient quasi-phase-matched second-harmonic generation of a seeded 10-W erbium fiber amplifier in periodically poled KTP. Nonlinear contributions to generation of high-power continua in holey fibers are identified and analyzed.     

Transformation of waves and eigenoscillations of an inhomogeneous layer of hot plasma

On the case of a plasma layer we show that in a hot plasma with the inhomogeneity of density across the magnetic field there exist eigenmodes for frequencies of hybrid resonance that are combinations of two kinds of waves: The potential long waves of cold plasma and the short-wave Bernstein modes. Their coupling is due to transformation in the region of the hybrid resonance. These eigenmodes can also be travelling waves with energy transmitted in one direction by a long wave and in the opposite one by a short wave. Different types of eigenmodes and corresponding quantization conditions are obtained.