Stability of transition metal complexes with sulfonated polymers

Stability constants of macromolecular metallocomplexes of transition metal ions (Ag⁺, Cu²⁺, Ni²⁺, Fe³⁺) with sulfonated polymers in water and aqueous HCl and NaCl solutions were determined from quenching by transition metal ions of the luminescence of macromolecules labeled with luminescent groups.     

A Polarographic Study of Tl + , Pb 2 and Cd 2+ Complexes with Dicyclohexano-18-Crown-6 in Some Binary Mixed Solvents

The complexes of Tl⁺, Pb²⁺ and Cd²⁺ cations with the macrocyclic ligand, dicyclohexano-18-crown-6\linebreak(DC18C6) were studied in water/methanol (H₂₊O/MeOH), water/1-propanol (H₂₊O/1-PrOH), water/acetonitrile (H₂₊O/AN), water/dimethylformamide (H₂₊O/DMF), dimethylformamide/acetonitrile (DMF/AN), dimethylformamide/methanol (DMF/MeOH), dimethylformamide/1-propanol (DMF/1-PrOH) and dimethylformamide/nitromethane (DMF/NM) mixed solvents at 22 °C using differential pulse polarography (DPP), square wave polarography and conductometry. In general, the stability of the complexes was found to decrease with increasing concentration of water in aqueous/non-aqueous mixed solvents with an inverse relationship between the stability constants of the complexes and the concentration of DMF in non-aqueous mixed solvents. The results show that the change in stability of DC18C6.Tl⁺, vs the composition of solvent in DMF/AN and DMF/NM mixed solvents is apparently different from that in DMF/MeOH and DMF/1-PrOH mixed solvents. While the variation of stability constants of the DC18C6.Tl⁺ and DC18C6.Pb²⁺ complexes vs the composition of H₂₊O/AN mixed solvents is monotonic, an anomalous behavior was observed for variations of log K_f vs the composition of H₂₊O/1-PrOH and H₂₊O/MeOH mixed solvents. The selectivity order of the DC18C6 ligand for the cations was found to be Pb²⁺ > Tl⁺ > Cd²⁺.     

A Polarographic Study of Tl+, Pb2+ and Cd2+ Complexes with Aza-18-crown-6 and Dibenzopyridino-18-crown-6 in some Binary Mixed Non-aqueous Solvents

The complexation of Tl⁺, Pb²⁺and Cd²⁺ cations by macrocyclic ligands, aza-18-crown-6 (L1) and dibenzopyridino-18-crown-6 (L2) was studied in some binary mixtures of methanol (MeOH), n-propanol (n-PrOH), nitromethane (NM) and acetonitrile (AN) with dimethylformamide (DMF) at 22 °C using DC (direct current) and differential pulse polarographic techniques (DPP). The stoichiometry and stability constants of the complexes were determined by monitoring the shifts in half-waves or peak potentials of the polarographic waves of metal ions against the ligand concentration. In all of the solvent systems, the stability of the resulting 1:1 complexes was found to be L1 > L2. The selectivity order of the L2 ligand for the cations was found to be Pb²⁺ > Tl⁺ > Cd²⁺ and the selectivity of the L1 ligand for Pb²⁺ ion was greater than that of Tl⁺ ion. The results show that the stability of the complexes depends on the nature and composition of the mixed solvents. There is an inverse relationship between the stability constants of the complexes and the amount of dimethylformamide in the mixed solvent systems.     

Hyperbranched copolymer containing triphenylamine and divinyl bipyridyl units for fluorescent chemosensors

A fluorescent hyperbranched copolymer (HTP) and a linear copolymer (PTP) as a reference sample to HTP both containing triphenylamine and divinyl bipyridyl units were synthesized via Heck coupling reaction from 5,5′‐Divinyl‐2,2′‐bipyridyl with tris(4‐bromophenyl)amine and with 4,4′‐dibromotriphenylamie, respectively. The chemical structure of HTP was confirmed by FTIR, ¹H NMR, and ¹³C NMR. The polymer HTP had a number‐average molecular weight of 1895 and a weight‐average molecular weight of 2315, and good solubility in conventional organic solvents, such as THF, DMF, and chloroform, and exhibited good thermal stability. The UV–vis absorption and photoluminescence (PL) spectra exhibited absorption maximum at 428 nm and emissive maximum at 531 nm for the HTP solution. The spectroscopic results of HTP and PTP indicated that hyperbranched conjugated structure increases the effective conjugation length, as compared with corresponding linear conjugated structure. The fluorescence of the polymer in solution can be quenched by various transition metal ions. The effect of backbone structure of the conjugated polymer‐based chemosensors on the sensitivity and selectivity in metal ions sensing have been investigated, and the quenching effect of HTP is more sensitive toward transition metal than linear copolymer PTP. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 222–230, 2009     

基于乙醇和铝离子聚集诱导的铜纳米团簇

金属纳米团簇(MNCs)作为一种新型的纳米材料,具有合成方法简单、光稳定性强、毒性低、生物相容性好以及发光效率高等优点。在本研究中,使用“一锅法”合成谷胱甘肽保护的铜纳米团簇。在激发波长为370 nm时,GS@CuNCs的荧光发射波长在610 nm左右。铜纳米团簇可以通过有溶剂诱导和阳离子诱导两种方法聚集诱导增强其荧光强度。通过测定在不同溶剂(乙醇、甲醇、N, N-二甲基甲酰胺)中铜纳米团簇的荧光强度,探究了溶剂极性对聚集的影响。研究结果表明：在水溶液中铜纳米团簇只发射弱的荧光,随着乙醇含量从0%到85%,其荧光强度逐渐增强。此外,我们开发了一种新的选择性好、灵敏性高的检测铝离子的荧光探针。线性范围为2–20 μmol·L^-1,且检测限(LOD)为33 nmol·L^-1。进一步探究可得,乙醇和铝离子能使GS@CuNCs荧光强度显著增加的机理为聚集诱导荧光增强。     

A thermodynamic study of complexation process between <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>′-dipyridoxylidene(1,4-butanediamine) and Cd<Superscript>2+</Superscript> in some binary mixed solvents using conductometry

Complexation of the Cd²⁺ ion with N,N′-dipyridoxylidene(1,4-butanediamine) Schiff base was studied in pure solvents including acetonitrile (AN), ethanol (EtOH), methanol (MeOH), tetrahydrofuran (THF), dimethylformamide (DMF), water (H₂O), and various binary solvent mixtures of acetonitrile–ethanol (AN–EtOH), acetonitrile–methanol (AN–MeOH), acetonitrile–tetrahydrofuran (AN–THF), acetonitrile–dimethylformamide (AN–DMF), and acetonitrile–water (AN–H₂O) systems at different temperatures using the conductometric method. The conductance data show that the stoichiometry of complex is 1: 1 [ML] in all solvent systems. A non-linear behavior was observed for changes of log K_f of [Cd(N,N′-dipyridoxylidene(1,4-butanediamine)] complex versus the composition of the binary mixed solvents, which was explained in terms of solvent–solvent interactions. The results show that the thermodynamics of complexation reaction is affected by the nature and composition of the mixed solvents.     

Hg-selective fluoroionophore of p-tert-butylcalix[4]arene-diaza-crown ether having pyrenylacetamide subunits

A new ionophore having two pyrenylacetamide moieties based on the p-tert-butylcalix[4]arene-diaza-crown ether has been prepared and its fluoroionophoric properties were investigated. Bis(pyrenyl) derivative was found to exhibit selective ON-OFF type sensing behavior toward Hg²⁺ ions over other representative transition and heavy metal ions. The fluorescence quenching efficiency of larger than 20-fold was observed with 100 equiv of Hg²⁺ ions and the association constant was found to be 4.5 × 10⁴ M⁻¹ in methanol. The ionophore also exhibited a very efficient quenching of excimer fluorescence selectively upon treatment with Hg²⁺ ions in 50% aqueous methanol solution. The observed Hg²⁺-selective ON-OFF type fluorescence behavior could be utilized as efficient sensing and switching devices for the design of other supramolecular systems.     

Study of complex formation between 18-crown-6 and diaza-18-crown-6 with uranyl cation (UO2 2+) in some binary mixed aqueous and non-aqueous solvents

The complexation reaction between UO₂ ²⁺ cation with macrocyclic ligand, 18-crown-6 (18C6), was studied in acetonitrile–methanol (AN–MeOH), nitromethane–methanol (NM–MeOH) and propylencarbonate–ethanol (PC–EtOH) binary mixed systems at 25 °C. In addition, the complexation process between UO₂ ²⁺ cation with diaza-18-crown-6 (DA18C6) was studied in acetonitrile–methanol (AN–MeOH), acetonitrile–ethanol (AN–EtOH), acetonitrile–ethylacetate (AN–EtOAc), methanol–water (MeOH–H₂O), ethanol–water (EtOH–H₂O), acetonitrile–water (AN–H₂O), dimethylformamide–methanol (DMF–MeOH), dimethylformamide–ethanol (DMF–EtOH), and dimethylformamide–ethylacetate (DMF–EtOAc) binary solutions at 25 °C using the conductometric method. The conductance data show that the stoichiometry of the complexes formed between (18C6) and (DA18C6) with UO₂ ²⁺ cation in most cases is 1:1 [M:L], but in some solvent 1:2 [M:L₂] complex is formed in solutions. The values of stability constants (log K_f) of (18C6 · UO₂ ²⁺) and (DA18C6 · UO₂ ²⁺) complexes which were obtained from conductometric data, show that the nature and also the composition of the solvent systems are important factors that are effective on the stability and even the stoichiometry of the complexes formed in solutions. In all cases, a non-linear relationship is observed for the changes of stability constants (log K_f) of the (18C6 · UO₂ ²⁺) and (DA18C6 · UO₂ ²⁺) complexes versus the composition of the binary mixed solvents. The stability order of (18C6 · UO₂ ²⁺) complex in pure studied solvents was found to be: EtOH > AN ≈ NM > PC ≈ MeOH, but in the case of (DA18C6 · UO₂ ²⁺) complex it was : H₂O > MeOH > EtOH.     

A Spectroscopic Study of Charge Transfer Complexes of Tetraphenylporphyrin

Summary. The fluorescence quenching and complexation behaviour of tetraphenylporphyrin (TPP) with some organic acceptors such as chloranilic acid (CHL), 5,5-dithiobis-2-nitrobenzoic acid (DTNB), or 3,4-dinitrobenzoic acid (DNB) and tetravalent metal ions such as Th⁴⁺ and Zr⁴⁺ have been studied in methanol. The second-order fluorescence quenching rate constant (k_q), the association constant (K), the molar absorption coefficient (), and the thermodynamic parameters of the complexation process (G°, H°, and S°) have been evaluated using different organic solvents.     

A Spectroscopic Study of Charge Transfer Complexes of Tetraphenylporphyrin

The fluorescence quenching and complexation behaviour of tetraphenylporphyrin (TPP) with some organic acceptors such as chloranilic acid (CHL), 5,5-dithiobis-2-nitrobenzoic acid (DTNB), or 3,4-dinitrobenzoic acid (DNB) and tetravalent metal ions such as Th⁴⁺ and Zr⁴⁺ have been studied in methanol. The second-order fluorescence quenching rate constant (k_q), the association constant (K), the molar absorption coefficient (), and the thermodynamic parameters of the complexation process (G°, H°, and S°) have been evaluated using different organic solvents.     

Amphiphilic Schiff Base Organogels: Metal‐Ion‐Mediated Chiral Twists and Chiral Recognition

New amphiphilic gelators that contained both Schiff base and L ‐glutamide moieties, abbreviated as o‐SLG and p‐SLG, were synthesized and their self‐assembly in various organic solvents in the absence and presence of metal ions was investigated. Gelation test revealed that o‐SLG formed a thermotropic gel in many organic solvents, whilst p‐SLG did not. When metal ions, such as Cu²⁺, Zn²⁺, Mg²⁺, Ni²⁺, were added, different behaviors were observed. The addition of Cu²⁺ induced p‐SLG to from an organogel. In the case of o‐SLG, the addition of Cu²⁺ and Mg²⁺ ions maintained the gelating ability of the compound, whilst Zn²⁺ and Ni²⁺ ions destroyed the gel. In addition, the introduction of Cu²⁺ ions caused the nanofiber gel to perform a chiral twist, whilst the Mg²⁺ ions enhanced the fluorescence of the gel. More interestingly, the Mg²⁺‐ion‐mediated organogel showed differences in the fluorescence quenching by D ‐ and L ‐tartaric acid, thus showing a chiral recognition ability.     

The State of Copper Ions in Aqueous and Aqueous Ammonia Solutions of Copper Acetate

Stabilization of Cu²⁺ ions in aqueous and aqueous ammonia solutions of copper acetate was studied for a wide range of ammonia concentrations. The structure of copper acetate hydrate complexes was shown to markedly change upon dissolution in water. In aqueous solutions, copper is stabilized as strongly bound Cu²⁺ associates (dimers) in a distorted octahedral environment composed of water molecules and acetate groups oxygen atoms in equatorial positions with strong exchange interaction via acetate groups. In solutions of copper acetate in aqueous ammonia, the concentration of ammonia has a crucial effect on the ordering of Cu²⁺ ions in associates. At high ammonia concentration, disordered copper tetra-ammoniate associates with the \({d_{{x^2} - {y^2}}}\) ground state are formed, whereas at low ammonia concentration, bulky Cu²⁺ ion associate structures are generated, with the \({d_{{x^2} - {y^2}}}\) ground state, hydroxyl groups in the equatorial plane, and water molecules in the axial positions.     

Polymeric Coordination Compounds Derived from Transition Metal(II) with Tetradentate Schiff‐base: Synthetic,Spectroscopic, Magnetic and Thermal Approach

The polymeric coordination compounds have been synthesized using the dipotassium salt of N,N′‐di(carboxymethylene)terephthalaldehydediimine (K₂SB¹) or N,N′‐di(carboxyethylene)terephthalaldehydediimine (K₂SB²) with manganese(II), cobalt(II), nickel(II), copper(II), zinc(II), and cadmium(II). The ligands have been characterized by ¹H‐NMR, and ¹³C‐NMR spectra. The polychelates have been characterized by elemental analyses, magnetic measurements, thermogravimetric analyses, electronic spectra and infrared spectra. The coordination compounds are colored, and the central metal ions are octahedrally coordinated with two water molecules and the Schiff bases. The Schiff bases act as di‐negative tetradentate ligands, in which bonding occurs through two oxygen and two nitrogen atoms. The polymers are insoluble in all common organic solvents such as acetone, methanol, ethanol, N,N‐dimethylformamide and dimethylsulfoxide.     

Effect of magnetic field on property of a non-aqueous solvent upon complex formation between kryptofix 22DD with yttrium (III) cation

To understand the effect of a magnetized solvent upon complexation processes between the metal ions and the ligands, we studied the complexation reaction between Y⁺³ cation with the kryptofix 22DD, in non-magnetized and magnetized methanol solvents at different temperatures using the conductometric method. Addition of kryptofix 22DD to the cation solution causes a continuous increase in the molar conductivities which indicates that the mobility of the complexed cation is higher than the uncomplexed one in both non-magnetized and magnetized methanol solvents. The conductance data show that the stoichiometry of the complex formed between the ligand and Y³⁺ cation is 1:1(M:L). The value of stability constant of (kryptofix 22DD.Y)³⁺ complex was determined from conductometric data using a non-linear least-square program (GENPLOT). The results obtained in this investigation, show that the stability constant of the complex decreases when we use magnetized methanol solvent.     

Synthesis and characterization of 2, 4-dihydroxy-benzaldehydeoxime-formaldehyde polymers and their application as ion-exchangers

Polymers were prepared by the condensation of 2, 4-dihydroxybenzaldehydeoxime (2, 4-DBO) and formaldehyde (F) in the presence of oxalic acid as catalyst with varying molar ratios of reacting monomers. Polymers were characterized by their IR spectra, elemental analyses, TGA and M_n as determined by vapour pressure osmometry as well as by non-aqueous conductometric titrations. Viscosity measurements of the solutions of polymer samples were carried out in dimethylformamide. Chelation ion-exchange properties have also been studied employing the batch equilibration method. This method involved the measurement of distribution of a given metal between the polymer sample and a solution containing metal ions. The study was carried out over a wide pH range and in media of various ionic strengths. The polymer showed a higher selectivity for UO ₂ ²⁺ and Fe³⁺ ions than for Cu²⁺, Ni²⁺, Co²⁺ and Mn²⁺ ions.     

Photophysical and Complexation Behavior of (4-Dimethylamino-benzylidene)-(4,6-dimethyl-pyrimidin-2-yl)-amine

The absorption and fluorescence characteristics of (4‐dimethylamino‐benzylidene)‐(4,6‐dimethyl‐pyrimidin‐2‐yl)‐amine (SB) have been investigated in different solvents. Both the absorption and emission spectra of SB exhibit red shifts as the solvent polarity increases. This indicats a change in dipole moment of molecules upon excitation as a result of intramolecular charge transfer interaction. The fluorescence quantum yield depends strongly on the properties of the solvents, which was discussed on the bases of positive and negative solvatokinetic effects. The effect of some divalent transition metal ions such as Mn²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, and Hg²⁺on the absorption and fluorescence spectra of SB is also investigated. The results were consistent with formation of highly colored metal‐ SB complex which is responsible for the extreme quenching of the fluorescence of SB. The variations of both the formation constant of the complex and Stern‐Volmer constant were correlated with the electronic structure of the used metal ion.     

Luminescence of organic dyes in silica matrices

The luminescence spectra of the acridine dyes adsorbed on the dispersed silica surface and introduced into the silica film composition at the sol-to-gel transition stage have been studied. The formation of protonated forms of adsorbed dyes, the appearance of the anomalously long-time recombination afterglow, and the photoradicalization of dye at low temperature have been found. The effect of the transition metal dopant ions of Fe and Mn in a SiO₂ matrix on dye luminescence quenching has been investigated. The luminescence quenching due to the transition metal ions is explained on the basis of an exchange-resonant interaction with contribution of the chemical interaction - complex formation.     

EXAFS, SAXS and Eu3+ Luminescence Spectroscopy of Sol-Gel Derived Siloxane-Polyethyleneoxide Hybrids

Hybrid Eu³⁺-doped silica-poliethyleneoxide (PEO) nanocomposites with covalent bonds between the inorganic (siloxane) and organic (PEO) phases have been obtained by sol-gel process. These materials are transparent, flexible and present high Eu³⁺ luminescence output. Their luminescence properties, local environment around europium ions and structure have been investigated as a function of europium content. EXAFS measurements indicate that the increase in Eu-doping induces a decrease in Eu³⁺ coordination number. An increase in symmetry degree around the metal ion is also observed for increasing Eu³⁺ concentration, while non radiative decay paths from the ⁵D₀ excited state become more important. SAXS results suggest the preferential interaction of europium ions with ether-type oxygens of the polymer chains. However, the existence of interactions between the cations and the carbonyl groups from urea bridges located at the siloxane-PEO interface can not be excluded.     

Construction of optical active metallo-supramolecular polymers from enantiopure bis-pybox ligands

Two types of optical active metallo-supramolecular polymers were successfully constructed from the complexation of two enantiopure bis-pyridine-dioxazole (bis-pybox) ligands and 3d transition metal ions such as Zn²⁺ and Fe²⁺ in organic solution. The self-assembly process was investigated via UV–vis and fluorescent titration. The chiral characteristic of polymers was detected by circular dichroism. It was revealed that the phenyl-substituted polymers showed higher stability than the benzyl-substituted ones. Temperature-dependent circular dichroism spectra demonstrated the dynamic structure of this type polymer under the variation of temperature. This work highlights the opportunity in designing and constructing of the optical active metallo-supramolecular polymers from the organic privilege ligands in the field of asymmetric catalysis.     

Probes and Polymers for Optical Sensing of Oxygen

Oxygen detection techniques are used in various fields, such as chemical or clinical analysis and environmental monitoring. Recently, a variety of devices and sensors based on photo-luminescent or photoexcited state quenching of organic dyes have been developed to measure oxygen partial pressure on the solid surface. Many optical oxygen sensors are composed of organic dyes, such as polycyclic aromatic hydrocarbons (pyrene, pyrene derivative etc.), transition metal complexes (Ru²⁺, Os²⁺, Ir³⁺ etc.), metalloporphyrins (Pt²⁺, Pd²⁺, Zn²⁺ etc.) and fullerene (C₆₀ and C₇₀) immobilized in oxygen permeable polymer films. In this review, the properties of various oxygen permeable polymers for matrix of optical oxygen sensor and various dye probes for oxygen sensing are described.Received November 19, 2002; accepted May 14, 2003 published online August 22, 2003