Hydrolytic aging of crystallizable shape memory poly(ester urethane): Effects on the thermo-mechanical properties and visco-elastic modeling

The shape memory functionality of a segmented poly(ester urethane) and its hydrolytically aged specimens has been studied by cyclic thermo-mechanical measurements with an imposed strain of 100%. The shape memory effect was triggered by a melting transition in the soft segment phase. Aging was enforced by immersion in hot de-ionized water. In the course of the immersion the tensile properties (secant moduli, stress and strain at yield and break) were impaired by hydrolysis. Advanced specimen embrittlement finally led to rupture during the first thermo-mechanical cycle. This happened after 68 days of aging at 55 °C and correspondingly after 8 days at 80 °C. The residual strain after the first cycle, which was about 25%, increased significantly with aging time. Therefore, the total strain recoverability became ever smaller: aged specimens needed conditioning by at least two cycles for a full development of shape recoverability. Likewise the recovery force decreased continuously. Despite these degradation effects, it was observed that the shape fixity and the cycle-related shape recovery of appropriately conditioned specimens (number of cycles N > 2) remained on a constant high level (at round 100% and between 90% and 100%, respectively) throughout the whole aging period. These observations are discussed within the framework of a simplified model of the behavior of crystallizable shape memory polymers. The amorphous state of the polymer is described by the equation of the linear visco-elastic solid. As for the semi-crystalline state the material is assumed to react elastically with respect to deviations from the configuration, which was frozen up under constraint conditions. The curves of the dependence of the material behavior on aging time at 55 °C match perfectly those at 80 °C when the time axis is adjusted by a factor of 8.5, from which the apparent activation energy for hydrolytic aging in the amorphous state of 82 kJ mol⁻¹ could be deduced.     

Poly(urethane-oxazolidone): Synthesis, characterisation and shape memory properties

Poly(urethane-oxazolidone) were synthesized by reacting isocyanate-terminated oxazolidone with hydroxy-telechelic poly(tetramethylene oxide) (PTMO). The molar ratios of the reactants were varied to get polymers of varying oxazolidone and urethane compositons. The polymers were characterized by DSC, FTIR, XRD, dynamic mechanical thermal analysis and chemical analyses. An increase in the concentration of urethane and oxazolidone groups caused a decrease in tensile strength and elongation of the poly(urethane-oxazolidone). The polymers possessed crystallites of PTMO whose melting transition temperature decreased on enhancing the oxazolidone concentration. The polymers exhibited thermo-responsive shape memory properties, which was confirmed and quantified by cyclic tensile tests. The influence of oxazolidone modification and the consequent soft/hard segment variation on the thermal, mechanical, dynamic-mechanical and shape recovery properties of the resultant polymers was investigated. The oxazolidone moities conferred enhanced shape recovery and shape fixity to the polyurethane.     

Recovery performance and characteristics in shape memory effects of aliphatic polyether urethane

The analysis on the recovery performance and characteristics in shape memory effects is helpful for the optimal design and engineering applications of shape memory polymers and their composites. To investigate the relationships among recovery performance, material parameters, and loading conditions, by taking aliphatic polyether urethane as an example, the researchers simulate the shape memory behaviors numerically using a three‐dimensional viscoelastic model. The material parameters for this model are taken from stress relaxation tests, rather than dynamic mechanical analysis tests. Both the unconstrained and the constrained recovery behaviors during strain‐controlled shape memory processes are analyzed. The results reveal that the unconstrained recovery occurs at the same temperature regardless of the applied strain values. Another interesting result is that the shape recovery temperature in unconstrained recovery situations increases and the maximum recovery stress under constrained recovery conditions decreases with the increase of heating rates. Copyright © 2013 John Wiley & Sons, Ltd.     

New segmented poly(ester‐urethane)s from renewable resources

The physical and mechanical properties of aliphatic homopolyesters from monomers obtainable from renewable resources, namely, 1,3‐propanediol and succinic acid, were improved by their combination with aromatic urethane segments capable of establishing strong intermolecular hydrogen bonds. Segmented poly(ester‐urethane)s were synthesized from dihydroxy‐terminated oligo(propylene succinate)s chain‐extended with 4,4′‐diisophenylmethane diisocyanate. The newly synthesized materials were exhaustively characterized by ¹H NMR spectroscopy, size exclusion chromatography, differential scanning calorimetry, dynamic mechanical analysis, and with respect to their main static mechanical properties, an Instron apparatus was used. The average repeat number of the hard segments, evaluated by NMR, ranged from 4 to 9, whereas that of the flexible segments was about 14. The degree of crystallinity, glass‐transition temperature, melting point, tensile strength, elongation, and Young's modulus were influenced by the ratio between hard and soft segments of the segmented copolymer in a predictable way. The results demonstrated that poly(ester‐urethane)s from 1,3‐propanediol and succinic acid are promising thermoplastics. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 630–639, 2001     

Hydrolytic degradation and functional stability of a segmented shape memory poly(ester urethane)

In order to understand the effects of water and hydrolytic ageing on semi-crystalline poly(ester urethane) and its shape memory functionality, water immersion experiments at elevated temperature have been performed on a model substance and various parameters were monitored: change of the melting/crystallisation temperatures, substantial increase in crystallinity, temperature dependence of the water diffusion coefficient and solubility, hydrogen-bonding index and phase mixing by peak deconvolution of the FT-IR carbonyl region and day-to-day tensile and thermo-mechanical cyclic tensile tests. A rising fraction of freezable water agglomerates in the polymer was found for specimens cooled from the immersion temperature. The degradation process could be divided into three phases: an induction phase, a phase of continuous degradation and a phase of accelerated degradation. Shape recovery remains fairly constant during phase one and decreases slowly during phase two. The increase in crystallinity in phase two is accompanied by an increase in shape fixing ability.     

Shape memory induced structural evolution of high performance copolyimides

In this work, two kinds of high temperature shape memory copolyimides were prepared and the shape memory cycles induced structural evolution of macromolecular chains was investigated in detail. The glass transition temperature (T_g) of poly(benzoxazole‐co‐imide) (PI1) and poly(benzimidazole‐co‐imide) (PI2) are 280 °C and 355 °C, respectively. The results show that PI1 could keep stable macromolecular chain structure under shape memory cycles and exhibit outstanding shape memory performance (R_f > 98%, R_r > 97%) under different stretch condition. Whereas, shape memory cycles induced orientation with more ordered macromolecular chains packing is formed for PI2 after several thermal mechanical cycles, which strongly affect physical crosslinking points, thermal mechanical properties as well as shape memory behaviors. The study on macroscopic property and microscopic structure evolution will promote a better understanding of the shape memory effect of polyimides and accelerate development of high performance polyimides for shape memory applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3858–3867     

Shape‐memory effect in hyperbranched poly(ethyleneimine)‐modified epoxy thermosets

A series of shape‐memory epoxy thermosets were synthesized by crosslinking diglycidyl ether of bisphenol A with mixtures of commercially available hyperbranched poly(ethyleneimine) and polyetheramine. Thermal, mechanical and shape‐memory properties were studied and the effect on them of the content and structure of the hyperbranched polymer was discussed. Measurements showed that the glass transition temperature can be tailored from 60 °C to 117 °C depending on the hyperbranched polymer content, and all formulations showed an appropriate glassy/rubbery storage modulus ratio. Shape‐memory programming was carried out at TgE′ given the excellent mechanical properties of the materials, with maximum stress and failure strain up to 15 MPa and 60%, respectively. The resulting shape‐memory behavior was excellent, with maximum shape recovery and shape fixity of 98% as well as a fast shape‐recovery rate of 22%/min. The results show that hyperbranched poly(ethyleneimine) as a crosslinking agent can be used to enhance mechanical and shape‐memory properties with different effects depending on the crosslinking density. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 924–933     

Recovery stress and work output in hyperbranched poly(ethyleneimine)‐modified shape‐memory epoxy polymers

In this study a series of hyperbranched modified shape‐memory polymers were subjected to constrained shape recoveries in order to determine their potential use as thermomechanical actuators. Materials were synthesized from a diglycidyl ether of bisphenol A as base epoxy and a polyetheramine and a commercial hyperbranched poly(ethyleneimine) as crosslinker agents. Hyperbranched polymers within the structure of the shape‐memory epoxy polymers led to a more heterogeneous network that can substantially modify mechanical properties. Thermomechanical and mechanical properties were analyzed and discussed in terms of the content of hyperbranched polymer. Shape‐memory effect was analyzed under fully and partially constrained conditions. When shape recovery was carried out with fixed strain a recovery stress was obtained whereas when it was carried out with a constraining stress the material performs mechanical work. Tensile tests at Tg^E′ showed excellent values of stress and strain at break (up to 15 MPa and almost 60%, respectively). Constrained recovery performances revealed rapid recovery stress generation and unusually high recovery stresses (up to 7 MPa) and extremely high work densities (up to 750 kJ/m³). The network structure of shape‐memory polymers was found to be a key factor for actuator‐like applications. Results confirm that hyperbranched modified‐epoxy shape memory polymers are good candidates for actuator‐like shape‐memory applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1002–1013     

Studies of the hydrolytic stability of poly(urethane-urea) elastomers synthesized from oligocarbonate diols

Polyurethane and poly(urethane-urea) elastomers synthesized from oligocarbonate diols are characterized by very good mechanical properties, biocompatibility and excellent resistance to both oxidation and hydrolysis and therefore are widely used in medical applications. In this paper the results of studies on hydrolytic stability of poly(urethane-urea) elastomers (PURC) obtained by moisture-curing of corresponding urethane prepolymers synthesized from isophorone diisocyanate (IPDI) and four different oligocarbonate diols (OCD) are presented. OCD were synthesized from dimethyl carbonate and 1,6-hexanediol, from cyclic ethylene carbonate and 1,6-hexanediol as well as from trimethylene carbonate. The changes of the sample weight, mechanical properties and surface properties after immersion in a standard phosphate buffer solution (pH = 7.4) for up to 3 months at 70 °C were monitored. It was shown that neither sample weight nor mechanical properties changed significantly for PURC obtained from OCDs synthesized from 1,6-hexanediol and dimethyl carbonate or ethylene carbonate what confirms good resistance to hydrolysis of those PURC. Also SEM studies of those samples before and after immersion did not reveal any surface degradation effects. However, PURC sample obtained from OCD synthesized from trimethylene carbonate showed significant changes in mechanical properties and distinct change of appearance and surface erosion after 3 months immersion. The initial decrease and later increase of stress at break observed for PURC samples during immersion, was explained by the reaction of residual NCO groups present in PURC with water leading to molecular weight increase which proceeded during immersion period in parallel to hydrolysis of carbonate bond.     

Epoxy‐cyanate ester shape memory thermoset: some aspects of phase transition,viscoelasticity and shape memory characteristics

A shape memory thermoset comprising of a co‐reacted system of epoxy resin (diglycidylether of bisphenol A), cyanate ester (bisphenol A dicyanate ester) and phenol telechelic poly(tetramethylene oxide) (PTOH) was investigated for its morphology, viscoelasticity and shape memory characteristics at the transition temperature regime. The system exhibited a switching temperature (T_switch) centered at about 105°C. Atomic force microscopy analyses at different temperatures provided evidences for the existence of a discrete phase at T_switch regime. Polarized light microscope images gave evidence for the birefringence and tubular crystal formation due to PTOH segments in the shape memory thermoset. It is concluded that the T_switch has its origin from melting transition of PTOH and T_g of the thermoset matrix, the latter being lowered through plasticization by PTMO segments. Reversibility of T_switch, and stress relaxation behavior of the blend were investigated by dynamic mechanical analysis (DMA). The reversibility of transition temperature was ascertained by cyclic DMA. Temperature dependency of shape memory properties implied fast recovery of original shape above the T_switch. The cured system manifests shape memory properties even below T_switch though it is a slow process. The extent of shape recovery increased with temperature and became faster in league with the trend in temperature dependency of stress relaxation of the polymer. Copyright © 2013 John Wiley & Sons, Ltd.     

Pressure-dependent Fourier transform infrared spectroscopy of a poly (ester urethane)

The effects of hydrostatic pressure upon (1) a segmented poly (ester urethane), (2) a hydrolytically degraded sample of the same polymer, and (3) models for the polyurethane and polyester segments in this polymer have been studied by Fourier transform infrared spectroscopy using high-pressure diamond anvil cells (DACs). The pressure responses of the vibrational frequencies of specific functional groups of the poly (ester urethane) in the 0-100-kbar range are compared with data for individual segment models and the partially degraded sample. The results indicated that the polymer is highly stable in this pressure regime, with no measurable degradation or phase changes. Differences in the pressure dependency of specific infrared bands between the poly (ester urethane) sample and the partially degraded sample are slight and consistent with changes in hydrogen-bonding interactions and shorter chain lengths in the degraded sample.     

Geminal poly(silyl ester)s: Highly labile degradable polymers

Geminal silyl ester linkages were used for the backbone construction of linear polymers, which exhibit rapid cleavage in the presence of atmospheric water. A series of poly(gem-silyl ester)s with two ester groups flanking each silicon atom were synthesized, in order to probe the effects of different silyl-substituted side-chain groups upon the physical and chemical properties. The transsilylation condensation reaction of bis(trimethylsilyl) terephthalate with dichlorodiisopropylsilane, dichlorodicyclohexylsilane, dichloromethyl-n-octadecylsilane, and dichloromethyl-4-methylphenethylsilane gave the four poly(gem-silyl ester)s with two isopropyl, two cyclohexyl, one methyl plus one octadecyl, and one methyl plus one 4-methyl-phenethyl side-chain groups per silicon, respectively. The polymers were characterized by NMR (¹H, ¹³C, and ²⁹Si), infrared spectroscopy (IR), size-exclusion chromatography (SEC), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). Hydrolytic degradation studies of the polymers solvated in tetrahydrofuran and as bulk samples in the solid state were performed in the presence of atmospheric water as the nucleophilic cleavage agent, and the molecular weight loss was monitored by SEC. Poly(diisopropylsilyl terephthalate) (1a) and poly(dicyclohexylsilyl terephthalate) (1b) were found to be more stable towards nucleophilic degradation in comparison to poly(methyl-n-octadecylsilyl terephthalate) (1c) and poly(methyl-4-methylphenethylsilyl terephthalate) (1d), due to the presence of sterically bulky isopropyl or cyclohexyl groups attached to the silicon atoms. All of the polymers degraded into small molecules upon hydrolysis, with the exception that the degradation products of 1c and 1d self-condensed in the solid state to form the respective polysiloxanes. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3606–3613, 1999     

Effect of comonomer on thermal/mechanical and shape memory property of L‐lactide‐based shape‐memory copolymers

In this study, three kinds of L ‐lactide‐based copolymers, poly(lactide‐co‐glycolide) (PLGA), poly(lactide‐co‐p‐dioxanone) (PLDON) and poly(lactide‐co‐caprolactone) (PLC), were synthesized by the copolymerization of L ‐lactide (L) with glycolide (G), or p‐dioxanone (DON) or ε‐caprolactone (CL), respectively. The copolymers were easily soluble in common organic solvents. The compositions of the copolymers were determined by ¹H‐NMR. Thermal/mechanical and shape‐memory properties of the copolymers with different comonomers were compared. Moreover, the effect of the chain flexibility of the comonomers on thermal/mechanical and shape‐memory properties of the copolymers were investigated. The copolymers with appropriate lactyl content showed good shape‐memory properties where both the shape fixity rate (R_f)and the shape recovery rate (R_r) could exceed 95%. It was found that the comonomers with different flexible molecular chain have different effects on their thermal/mechanical and shape‐memory properties. Among them, PLGA has the highest mechanical strength and recovery rate while PLC copolymer has high recovery rate when the lactyl content exceeded 85% and the lowest transition temperature (T_trans). Copyright © 2007 John Wiley & Sons, Ltd.     

Poly(ester urethane acrylates) and holographic properties of formulations on their basis

Poly(ester urethane acrylates) with unsaturated bonds in stiff blocks have been synthesized from oligo(ester acrylates) containing functional groups. The structure and mechanical properties of the block copolymers thus prepared have been studied before and after UV cure. On the basis of the said poly(ester urethane acrylates), light-sensitive formulations for holographic recording have been designed. The formation of holographic gratings under illumination by an Ar laser light has been investigated. The formations under study offer promise as photostructuring media for holography.     

Poly(caprolactone) containing highly branched segmented poly(ester urethane)s via A2 with oligomeric B3 polymerization

Highly branched, poly(caprolactone) (PCL) containing segmented poly(ester urethane)s were synthesized via polymerization of A₂ and oligomeric B₃ type monomers. An isocyanate functional butanediol‐based A₂ hard segment was synthesized and immediately reacted with a poly(caprolactone)‐based trifunctional (B₃) soft segment. Characterization of thermal properties using DMA and DSC analysis demonstrated that the PCL segment remained amorphous in branched poly(ester urethane)s. Conversely, the crystallinity of PCL segment was retained to some extent in a linear analogue with equivalent soft segment molecular weight. Tensile testing revealed a slight decrease in Young's modulus and tensile strength for the highly branched polymers compared with a linear analogue. However, highly branched poly(ester urethane)s demonstrated lower hysteresis. In addition to synthesis of highly branched polymers, poly(ester urethane) networks were synthesized from a highly branched hydroxyl‐terminated precursor and a low molar mass diisocyanate as the crosslinking agent. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6285–6295, 2008     

可生物降解多嵌段聚(酯-氨酯)的合成及其热致形状记忆性质

以端羟基L-丙交酯/乙交酯共聚物(PLLG-diol)和端羟基ε-己内酯/乙交酯共聚物(PCG-diol)为硬段和软段,通过与二异氰酸酯反应制得了软、硬分子量和组成均可调的多嵌段聚(酯-氨酯),表征了它们的形状记忆行为.多嵌段聚(酯-氨酯)具有良好的形状记忆性质,应变固定率达98%~99.5%,应变恢复率达93%~98.5%;通过转变温度的调节,可使多嵌段聚(酯-氨酯)在37℃体温下不发生形状变化,而在稍高于体温的温度(40~50℃)下恢复原始形状,其形状恢复速率可通过温度和升温速率来调节.     

POLYMER NETWORK-POLY(ETHYLENE GLYCOL)COMPLEXES WITH SHAPE MEMORY EFFECT

The complexes of poly(methacrylic acid-co-methyl methacrylate) network with poly(ethylene glycol) stabilized byhydrogen bonds were prepared. By introducing the poly(ethylene glycol), a large difference in storage modulus below andabove the glass transition temperature occurred and the complexes exhibited shape memory behaviors. The morphology ofcomplexes was studied by using DSC, WAXD, and DMA. The results indicate that the fixed phase of this kind of novelshape memory materials is the network, and the reversible phase is the amorphous state of PEG:PMAA complex phase. Theshape recoverability almost reaches 100%. This type of complexes can be regarded as a novel shape memory network.     

Novel THTPBA/PEG‐derived highly branched polyurethane scaffolds with improved mechanical property and biocompatibility

Highly branched polyurethane (PU) scaffolds that match mechanical properties are the preferred tissue engineering materials, which is composed of a multi‐hydroxyl‐terminated poly(butadiene‐co‐acrylonitrile) (THTPBA) prepolymer and poly(ethylene glycol) (PEG) via 1,6‐hexamethylene diisocyanate as anchor molecule. This combination is anticipated to influence or alter hydrophilicity or hydrophobicity, degradation and haemocompatibility of the PEG‐derived PUs. Hence, the surface properties, degradability, mechanical and biomedical properties of the PUs were scrutinized and assessed by FTIR, contact angles, gravimetry, stress‐strain measurement and haemolysis, platelet adhesion as well as methyl tretrazolium (MTT) assays. The experimental results indicated that the incorporation of THTPBA can mediate the degradation rate, which took place at the urethane or ester bonds in polymer chains. The haemolytic activity, platelet activation, and MTT investigations elicited that the component ratios of THTPBA to PEG had important influence on biomedical properties, including in vitro blood compatibility, cytotoxicity, and cell cycle or apoptosis of the PU scaffolds. The tensile stress‐strain investigations showed that the highly branched architecture offered high elastic modulus and mechanical strength. The novel PU scaffolds with highly branched architecture exhibited improved mechanical properties and biocompatibility as well as low toxicity by regulating proper component ratios, and are expected to be employed in tissue engineering, or as potential candidates for other blood‐contacting applications. Copyright © 2011 John Wiley & Sons, Ltd.     

Synthesis and hydrolytic degradation of stereoregular aromatic poly(ester amide)s derived from D‐xylose

Stereoregular poly(ester amide)s (PEAs) were prepared by the polycondensation method using naturally occurring D ‐xylose and aromatic diacids as the starting materials. The polymers were characterized by elemental analysis, GPC, IR, and ¹H‐ and ¹³C NMR spectroscopies. Thermal and X‐ray diffraction studies revealed them to be mainly amorphous. The polymers are hydrophilic and their degradation studies were carried out at 37 and 80 °C in buffered salt solution at pH 8. The degradation study was monitored by mass loss, GPC, IR, and NMR spectroscopies. The hydrolytic degradation of these PEAs occurred rapidly by hydrolysis of the ester functions to a final compound, which maintained the amide functions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Blends of a siloxane/urea/urethane-segmented copolymer with an IPDI-based polyetherurethane

A series of copolymer blends have been prepared using a poly(ether urethane) and a poly(siloxane–urea–urethane). The copolymers were prepared by a hardsegment first, two-step polymerization method. The hard segments of the copolymers were derived from isophorone diisocyanate (IP) and 1,4-benzenedimethanol (B), and the soft segments were based on polytetrahydrofuran (PTMO, M_w = 2000), and polydimethylsiloxane (PDMS, M_w =27,000), respectively. The siloxanecontaining copolymer, PDMS27K-IP-B2 (2 moles diol chain extender/mole PDMS27K), was used as the minor component (1.6, 2.5 and 6.0 wt%) in a series of blends. These blends were found to preserve the mechanical properties of the poly(ether–urethane) as well as the surface properties of the poly(siloxane–urea–urethane).