Hydrolytic degradation and thermal properties of linear 1-arm and 2-arm poly(dl-lactic acid)s: Effects of coinitiator-induced molecular structural difference

“Linear” 1-arm and 2-arm poly(dl-lactide) [i.e., poly(dl-lactic acid), or PDLLA] polymers with relatively low number-average molecular weights (M_n in the range 0.2-6 × 10⁴ g mol⁻¹) were synthesized using ring-opening polymerization of dl-lactide initiated with tin(II) 2-ethylhexanoate (i.e., stannous octoate) and coinitiators of dl-lactic acid and ethylene glycol (these PDLLA polymers are hereafter abbreviated as 1-DL and 2-DL, respectively). Their glass-transition properties were monitored by differential scanning calorimetry, and their hydrolytic degradation was investigated using gravimetry and gel permeation chromatography. The results of the present study indicate that the coinitiator-induced molecular structural difference of the terminal groups, the chain directional change, the incorporated coinitiator moiety as an impurity in the middle of the molecule, and the molecular weight each affect both the hydrolytic degradation behavior and rate, and the glass-transition properties of the “linear” 1-DLs and 2-DLs. The glass-transition temperature (T_g) values were higher for the 2-DLs than for the 1-DLs, indicating low chain mobility and a strong inter-chain interaction of 2-arm PDLLA. However, the coinitiator-induced molecular structural difference did not produce a difference in the excess free volume of the end groups between the 1-DLs and 2-DLs, despite the difference produced in the terminal groups. On the other hand, although the hydrolytic degradation of the 1-DLs and 2-DLs proceeds via bulk erosion, significant surface erosion also occurs in the 2-DLs. This should have caused a larger weight loss and lower decrease rate of M_n of the 2-DLs compared to those of the 1-DLs. Moreover, the results of the present study indicate that in 2-arm PDLLA selective chain cleavage at the terminal ester groups or second ester groups from the chain terminals, which are induced by two terminal hydroxyl groups, is the significant hydrolytic degradation route. However, the random cleavage of ester groups, irrespective of their position, is the main hydrolytic degradation route.     

Porous thin films based on photo-cross-linked star-shaped poly(D,L-lactide)s

Self-assembly processes and subsequent photo-cross-linking were used to generate cross-linked, ordered microporous structures on the surfaces of well defined four-arm star-shaped poly(D,L-lactide) (PDLLA) thin films. The four-arm star-shaped PDLLAs were synthesized using an ethoxylated pentaerythritol initiator. Solutions of the PDLLAs were cast in a humid environment, and upon solvent evaporation, ordered honeycomb structures (or breath figures) were obtained. Correlations between molar mass, polymer solution viscosity, and pore dimensions were established. The average pore dimension decreased with increasing polymer solution concentration, and a linear relationship was observed between relative humidity and average pore dimensions. Highly ordered microporous structures were also developed on four-arm star-shaped methacrylate-modified PDLLA (PDLLA-UM) thin films. Subsequent photo-cross-linking resulted in more stable PDLLA porous films. The photo-cross-linked films were insoluble, and the honeycomb structures were retained despite solvent exposure. Free-standing, structured PDLLA-UM thin films were obtained upon drying for 24 h. Ordered microporous films based on biocompatible and biodegradable polymers, such as PDLLA, offer potential applications in biosensing and biomedical applications.     

Synthesis of Star-Shaped Polymers via Coordination of Bipyridyl-Terminated Polyoxyethylene with Metal Ions

Abstract

This paper describes the synthesis of various star-shaped polymers by means of complexation of bipyridyl-terminated polyoxyethylene with Ru(II) ion. Three kinds of bipyridyl-terminated polyoxyethylenes of different molecular weights were prepared from the corresponding polyoxyethylene monomethyl ethers with narrow molecular weight distributions. Bipyridyl was found to be introduced quantitatively at the end of the polymers based on the results of UV spectra. The formation of a star-shaped polymer was carried out by the reaction of RuCl₃ with three equivalents of bipyridyl-terminated polyoxyethylene. The UV spectrum of the star-shaped polymer obtained supported the formation of a typical Ru(II) tris(bipyridyl) complex. From the results of GPC, the star-shaped polymer obtained had a higher molecular weight than the pre-polymer and showed a narrow molecular weight distribution. In the case of a Ni(II) or a Co(II) complex, however, the star-shaped polymer was found to be dissociated into three linear prepolymers under the conditions of GPC measurement.     

Study on controlled/living free-radical polymerization of methyl acrylate in the presence of benzyl 9H-carbazole-9-carbodithioate under thermal condition

The polymerizations of methyl acrylate have been studied under thermal condition using benzyl 9H-carbazole-9-carbodithioate (BCCDT) as control agent. The obtained polymers were characterized by gel permeation chromatography (GPC), ¹H nuclear magnetic resonance (¹H NMR) and MALDI-TOF mass spectra. The results at 60 °C show that the molecular weight of the polymer increases linearly with monomer conversion, the molecular weight distribution is fairly narrow (even inferior to 1.10), and there exists a linear relationship between ln ([M]₀/[M]) and polymerization time. It is worthy of being noticed that the narrow polydispersities are comparable with those from living anionic polymerization. All of the evidences indicate that the polymerization is a good ‘living’ process. When the experiment is carried out at higher temperature, the polymerization rate is markedly faster with controlled polymerization characters except for a relatively broader polydispersity. The good control for free radical polymerization may be correlated with the large conjugation structure of carbazyl of BCCDT.     

How does the type of counterion influence the polymerization rate and thermal properties of tailored choline-based linear- and star-shaped poly(ionic liquid)s PILs?

The synthesis of tailored [2-(methacryloyloxy)ethyl]-trimethylammonium chloride (ChMA/Cl⁻) and bis(trifluoromethanesulfonate) imide (ChMA/NTf₂⁻)-based ionic homopolymers by sustainable activators generated by electron transfer atom transfer radical polymerization (ATRP) method has been demonstrated. Linear and four-arm star-shaped macromolecules were obtained with the use of two synthetic strategies: (a) direct polymerization of ionic monomers with counterions differing in hydrophilicity (prepolymerization) and (2) modification by ion exchange from Cl⁻ to NTf₂⁻ (postpolymerization) using both classical ATRP initiator and pentaerythritol-based initiator. The effect of counterions on the polymerization kinetics and the physicochemical and thermodynamical properties of resulted poly(ionic liquid)s (PILs) has been investigated. Results showed that polymerizations of ChMA/NTf₂⁻ proceeded with higher rate in comparison to ChMA/Cl⁻ one independently on the predetermined topologies (linear and four-arm star-shaped). From thermodynamical point of view, the glass transition temperature T_g increased with molecular weight M_n for linear- and star-shaped PILs for both types of counterion. In addition, star-shaped polymers of comparable M_n to linear ones were characterized by slightly higher T_g values. The resulting polyelectrolytes, after modification via exchange of Cl⁻ anions to NTf₂⁻ ones were characterized by much higher T_g in comparison to those produced by direct polymerization of ionic monomer, indicating the crucial role of postpolymerization modification on thermodynamical properties of PILs. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2681–2691     

Analysis of polymer films by diffuse reflectance FTIR spectroscopy: Characterization of terminal carboxyl functionalities

Fourier transform infrared (FTIR) spectroscopy in the diffuse reflectance mode was used to study polyethylene terephthalate (PET) films. The polymer film (12 μm, molecular weight M₁ = 18,000) was placed on a finely powdered KBr matrix, used as a reference. Infrared spectra exhibited a new band at 1684 cm^?1, not usually reported in the literature. This band is assigned to the C? O stretching vibration of a terminal acidic function in the presence of internal hydrogen bonds. In the carbonyl region, artifacts created by specular reflection are also discussed. The assignment of the band at 1684 cm^?1 is confirmed by transmission measurements on the overtone of carbonyl group (3335 cm^?1), using polymer films with thicknesses greater than 200 μm and by comparison with polymer of different molecular weight. These acidic functions can be used to monitor the rate of polymerization. It is therefore possible to obtain information on the polymerization rate of PET films, using diffuse reflectance and transmission analysis, directly on the solid. © 1992 John Wiley & Sons, Inc.     

有机/无机复合载体负载复合催化剂用于乙烯聚合时有机载体的作用

采用溶胶-凝胶法,将苯乙烯-丙烯酸(P(S-co-AA))共聚物包覆在以硅胶/MgCl2为载体的TiCl3催化剂(M-1催化剂)上,负载(n-BuCp)2ZrCl2后制得TiCl3/(n-BuCp)2ZrCl2复合催化剂,研究聚合物载体P(S-co-AA)在复合催化剂乙烯聚合中的作用.前期实验结果表明有机载体P(S-c...     

Synthesis of a novel star liquid crystal polymer using trifunctional initiator via atom transfer radical polymerization

In this paper, two types of three-arm star mesogen-jacketed crystal polymers (MJLCPs) with different core (that is hard core and soft core) were synthesized by 2,5-bis[(4-methoxyphenyl)oxycarbonyl]styrene (MPCS), which was initiated by two different trifunctional initiators 1,3,5-(2′-bromo-2′-methylpropionato)benzene (I_a) and 1,1,1-tris(2-bromoisobutyryloxymethyl)propane (I_b), respectively. Characterization of these polymers by ¹H NMR and GPC clearly supported the formation of a three-arm star-shaped PMPCS. The resulting three-arm star PMPCS possessed narrow molecular weight distribution, and its molecular weight (M_n,NMR) agreed well with the theoretical value, which reveals the quantitative initiation efficiency. The liquid-crystalline behaviors of the two types of three-arm star polymer with different structure were also investigated by differential scanning calorimeter (DSC) and polarized optical microscope (POM). We found that the liquid-crystalline behavior was incorrelated with structure of core but correlated with the length of three-arm star polymer arm. Only each arm of the three-arm star-shaped polymers with a M_n,GPC beyond 0.90 × 10⁴ g/mol could form a liquid crystalline phase,which was found to be stable up to the decomposition temperature of these tri-arm MJLCPs.     

New Sn(IV) and Ti(IV) bis(trimethylsilyl)amides in d,l-lactide polymerization, SEM characterization of polymers

Ring-opening polymerization of d,l-lactide initiated with new chlorotris(bis(trimethylsilyl) amido) tin(IV), tetrakis(bis(trimethylsilyl)amido) tin(IV) and titanium(IV) was investigated. New complexes reveal practically quantitative conversion degrees and produced polymers with higher molecular weight with respect to reference alkoxo-species.The X-ray crystal structure of chlorotris(bis(trimethylsilyl)amido) tin (IV) was investigated. Axial enantiomerism of [SnCl{N(SiMe₃)₂}₃] molecules in solution was studied by high-field dynamic NMR, the value of Gibbs activation energy ΔG^‡ = 59.5 kJ/mol.Field emission SEM investigation of bulk polymer samples and thin films on conductive Al foil revealed a stratified fibrous textures in the bulk polymers, as well as nanoscaled topographical features due to coils and entanglements of individual macromolecules in thin films.     

Star-shaped polymers with the fullerene C60 branching center

The anionic methods for the synthesis of homo- and heteroarm (hybrid) star-shaped polymers using fullerene C₆₀ aPre considered. The possibilities of fullerene C₆₀ as an agent of combination of living polymer chains and the procedures of transformation of polymer derivatives of C₆₀ (hexaadducts) into polyfunctional macroinitiators of anionic polymerization of vinyl monomers are shown. The methods for functionalization of polymer fullerene derivatives and their combinations into structures of complex controlled architecture are presented. The structural features and initiating properties of the living polymer fullerene derivatives and their role in the formation of heteroarm star-shaped macromolecules with the controlled number of branches and predetermined molecular weight characteristics of the arms are discussed. The hydrodynamic properties of the star-shaped fullerene-containing polymers are considered. The data on the small-angle neutron scattering study of self-organization of the stars in solutions are presented.     

Atom transfer radical polymerization of n-octyl acrylate under microwave irradiation

The atom transfer radical polymerization (ATRP) of n-octyl acrylate (OA) was successfully carried out using ethyl-2-bromobutyrate as an initiator, and CuBr/2,2^′-bipyridine (bpy) as a catalyst under microwave irradiation (MI) at 76.8 °C. The polymerization of n-octyl acrylate under MI showed linear first-order rate plots, a linear increase of the number-average molecular weight M_n with conversion, and low polydispersities, 1.1<M_w/M_n<1.4, where M_w is weight-average molecular weight. The ATRP of n-octyl acrylate is well controlled. Under the same experimental conditions, the apparent rate constant, k_p^app, under MI is larger apparently than that under conventional heating. In addition, the effects of concentration of catalyst and other factors on polymerization are reported.     

Synthesis of well-defined, polymer-grafted silica nanoparticles via reverse ATRP

The surface grafting onto ultrafine silica via reverse ATRP of methyl methacrylate initiated by peroxide groups introduced onto the surface and conventional ATRP of Styrene initiated by the hybrid nanoparticles were investigated. The introduction of peroxide groups onto the silica surface was achieved by the reaction of hydrogen peroxide with chlorosilyl groups, which were introduced by the treatment of silica with thionyl chloride. Well-defined polymer chains were grown from the nanoparticle surfaces to yield individual particles composed of a silica core and a well-defined, densely grafted outer polymer layer. The polymerization was closely controlled in solution at quite low temperature such as 70 °C. In both cases, linear kinetic plots, linear plots of molecular weight (M_n) versus conversion, in hydrodynamic diameter with increasing conversion, and narrow molecular weight distributions (M_w/M_n) for the grafted polymer samples were observed. Hydrolysis of silica cores by hydrofluoric acid treatment enabled characterization of cleaved polymer using GPC. Ultrathin films of hybrid nanoparticles were examined using TEM and AFM.     

Synthesis, characterization and thermoreversible behaviours of poly(dimethyl siloxane)/poly(N-isopropyl acrylamide) semi-interpenetrating networks

Simultaneous and sequential poly(N-isopropyl acrylamide) (PNIPAAm)/poly(dimethyl siloxane) (PDMS) semi-interpenetrating polymer networks (IPNs) with different linear PDMS contents were prepared by free radical polymerization method. Their phase morphologies have been characterized by FTIR, DSC and SEM. The simultaneous semi-IPNs exhibited phase transition temperatures (T_pt) shifted higher temperature from glass transition temperatures (T_g) of their respective homopolymers, suggesting a heterophase morphology and only physical entanglement between the PNIPAAm network and linear PDMS with high molecular weight (Mn≈9000 g/mol). For sequential semi-IPNs, the shift of T_pts towards lower temperature suggested that the chemical interaction between the constituents of the IPNs increased with increasing PDMS content in the network. In addition, these semi-IPNs were characterized for their thermo-sensitive behaviour by equilibrium swelling studies. The results showed that incorporation of hydrophobic PDMS polymer into the thermo- and pH-sensitive PNIPAAm and P(NIPAAm-co-IA) (itaconic acid) hydrogels by semi-IPN formation decreased swelling degrees of IPNs without affecting their LCSTs whereas addition of acrylated PDMS (Tegomer V-Si 2250) as crosslinker instead of N,N^′-methylenebisacrylamide (BIS) into the structures of these hydrogels changed their LCSTs along with their swelling degrees.     

Study on the polymerizations of methyl methacrylate and styrene initiated with chlorotrimethylsilane and CuCl/N,N,N′,N″,N″-pentamethyldiethyltriamine

Methyl methacrylate (MMA) and styrene (St) have been radically polymerized in the presence of chlorotrimethylsilane and CuCl/N,N,N′,N″,N″-pentamethyldiethyltriamine (Me₃SiCl/CuCl/PMDETA). An analysis of the resultant polymers by ¹H NMR discloses terminal silyl group and chlorine atom in all the obtained polymers. Kinetics studies have been carried out by measuring monomer conversions and polymer molecular weights against polymerization time. The results indicate that, for both MMA and St polymerizations, the monomer conversions exhibit a quasi-linear relationship with polymerization time, and the polymer number-average molecular weight (M_n) also increases with monomer conversion. The molecular weights of both PS and PMMA exceed one hundred thousand. Regardless of molecular weight, all the polymers show narrow molecular distributions (M_w/M_n = 1.2-1.5). These polymerization reactions are speculated to follow a mechanism similar to that of atom transfer radical polymerization (ATRP).     

Hydrodynamic, electrooptical, and conformational properties of fullerene-containing poly(2-vinylpyridines) in solutions

For C₆₀ fullerene-containing poly(2-vinylpyridines) synthesized by anionic polymerization, the molecular mass and hydrodynamic size of macromolecules in solutions have been determined by molecular hydrodynamics (translational diffusion and viscometry) and electrooptics in dilute benzene and THF solutions. Under the same conditions in the molecular mass range (9.8–123) × 10³, the hydrodynamic behavior of linear poly(2-vinylpyridines) and their molecular-mass dependences have been examined and the conformational characteristics of macromolecules have been established. The branching of macromolecules has been characterized by comparing the properties of star-shaped fullerene-containing and linear poly(2-vinylpyridines). With consideration of the hydrodynamic data interpreted within the framework of regular star model, it is inferred that on average three to four linear polymer chains with a molecular mass of (8 ± 3) × 10³ for each chain are attached to a fullerene core of C₆₀ in molecules of fullerene-containing poly(2-vinylpyridines). The specific Kerr constant of fullerene-containing poly(2-vinylpyridines) in dilute benzene solution is ?(14 ± 1) × 10^?12 cm⁵/[g (300 V)²]. As evidenced by the electrooptical data, the incorporation of fullerene into the polymer weakens self-association of macromolecules in solution.     

Poly(3-hydroxyoxetane)—an analog of poly(vinyl alcohol): Synthesis,characterization, and properties

The spontaneous polymer formed from 3-hydroxyoxetane (HO), as first reported by Wojtowicz and Polak, is linear, low molecular weight, water-soluble, atactic, poly(3-hydroxyoxetane) (PHO) of high crystallinity with ? OCH₂CH(OH)CH₂OH end units. The highly crystalline nature of this atactic polymer may be related to the crystalline nature of atactic poly(vinyl alcohol) since PHO can be considered a copolymer of vinyl alcohol and formaldehyde. Spontaneous PHO apparently is formed in a cationic polymerization by the carboxylic acids produced by the air oxidation of HO on standing at room temperature for several months. The polymerization can be duplicated by the addition of 2% hydroxyacetic acid to HO. The rate of this unusual cationic polymerization increases greatly with acid strength, e.g., trifluoromethanesulfonic acid reacts explosively with pure HO. A mechanism is proposed for this cationic polymerization. High molecular weight, water-soluble, linear atactic, and highly crystalline PHO (mp = 155°C) was made by polymerizing the trimethylsilyl ether of HO with the i-Bu₃Al–0.7 H₂O cationic catalyst followed by hydrolysis. Two ¹H-NMR methods for measuring the tacticity of PHO were developed based on finding two different types of methylene units at 400 MHz with the methine protons decoupled. Also, an ¹H-NMR method was developed for measuring branching in HO polymers. High molecular weight, linear PHO with enhanced isotacticity (80%) has been obtained in low yield as a water-insoluble fraction with T_m = 223°C. The low molecular weight PHO prepared previously by the base-catalyzed, rearrangement polymerization of glycidol is highly branched.     

Synthesis of a star-shaped polymer via coordination of ester-linked pyridyl-terminated poly(oxyethylene) with ru(II)

The star-shaped polymer with trans-tetrapyridyl complex of Ru(II) as a core was prepared by complexation of ester-linked pyridyl-terminated poly(oxyethylene) (M̄_n = 2000) with a Ru₅Cl₁₂²⁻ cluster. The unimodal peak of the star-shaped polymer in the gel-permeation chromatogram was shifted to a higher molecular weight region than that of the starting prepolymer. The electron-withdrawing ester substituent in para position of the pyridine ring shifted the metal-to-ligand charge transfer (MLCT) band into the visible region.     

Studies on the atom transfer radical polymerization of a maleimide AB* monomer and modification of the halogen end groups

The atom transfer radical polymerization (ATRP) of an AB* monomer, N-(4-α-bromobutyryloxy phenyl)maleimide (BBPMI), was conducted using the complex of CuBr/2,2′-bipyridine as catalyst. The study of kinetics of polymerization and the growth behavior of macromolecules show that the polymerization proceeds rapidly in first 1 h and then slows down. The decrease in the rate of polymerization is ascribed to the poor reactivity of maleimide radicals from A* to initiate the polymerization of maleimide double bonds. The molecular weight of the resulting polymer also increases with the dosage of catalyst. The coincidence of molecular weight determined by hydrogen proton nuclear magnetic resonance spectroscopy (¹H NMR) and gel permeation chromatography (GPC) proves that the resulting polymer is of linear structure, which is further verified by ¹³C NMR measurement and high performance liquid chromatography (HPLC) analysis of the hydrolysate of the resulting polymer. The stabilization modification of the halogen end groups of the resulting polymer by free-radical chain transfer reaction was attempted under ATRP condition. Isopropyl benzene was employed as the chain transfer agent. Indeed, the modified polymer with carbon-bromine bonds conversion of 40.7% shows enhanced thermal stability. The initial weight loss temperature has been increased from 193 to 243 °C. On the other hand, the atom transfer radical copolymerization of BBPMI with styrene resulted in the formation of hyperbranched polymer.     

Synthesis of isotactic star-shaped poly(vinyl alcohol)

Isotactic 6-armed star-shaped poly(vinyl alcohol) (PVA) with a narrow molecular weight distribution was successfully prepared by the living cationic polymerization of 6-armed star-shaped poly(tert-butyl vinyl ether) (PTBVE) and subsequent acidic ether cleavage. The PTBVE was synthesized using hexa(chloromethyl) melamine (HCMM) as a hexafunctional initiator and ZnI₂ or ZnCl₂ as an activator in toluene/MC (1/1 v/v) at −70 °C. A better living stability of PTBVE was obtained in the ZnCl₂ activator system. The number average molecular weight and the polydispersity index of the 6-armed star-shaped PTBVE polymerized with ZnCl₂ at −70 °C for 24 h were 156,000 g/mol and 1.47, respectively. The fraction of the mm sequence of the resulting PVA was 52%.     

ROMP of t-butyl-substituted ferrocenophanes affords soluble conjugated polymers that contain ferrocene moieties in the backbone

A substituted ferrocenophane, 1,1′-((1-tert-butyl)-1,3-butadienylene)ferrocene, was synthesized and polymerized via ring-opening metathesis polymerization (ROMP) to give soluble high molecular weight polymers with ferrocenylene units in the backbone. The monomer readily underwent polymerization upon exposure to a tungsten-based metathesis initiator, W(CHC₆H₄-o-OMe)(NPh)[OCMe(CF₃)₂]₂ (THF), to give high molecular weight polymers (M_w=ca. 300,000). The molecular weights could be varied systematically by adjusting the monomer-to-catalyst ratio. UV/vis spectra revealed a bathochromic shift for the polymer, consistent with enhanced conjugation compared to the monomer. The polymer exhibited thermal properties similar to oligomeric poly(ferrocenylene). Cyclic voltammetry of the polymer suggested that the iron centers are coupled electronically. Upon doping with I₂ vapor, the polymers displayed semiconducting properties (σ=10⁻⁵ S cm⁻¹). Theoretical calculations were used to evaluate the nature of the bonding in these and related polymers.