Differences of Eu(III) and Cm(III) chemistry in ionic liquids: investigations by TRLFS

In this study the coordination structure and chemistry of Eu(III) and Cm(III) in the ionic liquid C(4)mimTf(2)N (1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide) was investigated by time-resolved laser fluorescence spectroscopy (TRLFS). The dissolution of 1 x 10(-2) M Eu(CF(3)SO(3))(3) and 1 x 10(-7) M Cm(ClO(4))(3) in C(4)mimTf(2)N leads to the formation of two species for each cation with fluorescence emission lifetimes of 2.5 +/- 0.2 ms and 1.0 +/- 0.3 ms for the Eu-species and 1.0 +/- 0.3 ms and 300.0 +/- 50 micros for the Cm-species. The interpretation of the TRLFS data indicates a comparable coordination for both the lanthanide and actinide cation in this ionic liquid. The quenching influence of Cu(II) on the fluorescence emission of Eu(III) and Cm(III) was also measured by TRLFS. While Cu(ii) does not quench the Cm(III) fluorescence emission in C(4)mimTf(2)N the Eu(III) fluorescence emission lifetime for both Eu-species in C(4)mimTf(2)N decreases with increasing Cu(II) concentration. Stern-Volmer constants were calculated (k(SV) = 1.54 x 10(6) M(-1) s(-1) and k(SV) = 2.70 x 10(6) M(-1)). By contrast, the interaction of Cu(II) with Eu(III) and Cm(III) in water leads to a quenching of both the lanthanide and actinide fluorescence. The calculated Stern-Volmer constants are 1.20 x 10(4) M(-1) s(-1) for Eu(III) and 1.27 x 10(4) M(-1) s(-1) for Cm(III). The investigations show, while the chemistry of trivalent lanthanides and actinides is similar in an aqueous system it is dramatically different in ionic liquids. This difference in chemical behavior may provide the opportunity for a separation of lanthanides and actinides with regard to the reprocessing of nuclear fuel.     

Complexation and the laser luminescence studies of Eu(III), Am(III), and Cm(III) with EDTA,CDTA, and PDTA and their ternary complexation with dicarboxylates

Spectroscopy has been used to determine the number of coordinated water molecules bound to Eu(III) and Cm(III) in a series of binary complexes of polyaminocarboxylate and their ternary complexes with dicarboxylates as well as with similar ligands with additional O-, N-, and S-donors. Complexes of Eu(III) and Cm(III) with polyaminocarboxylate alone contain ca. 2.5–3.0 waters of hydration. Increasing the steric requirement of a polyaminocarboxylate by increasing the number of groups in the ligand backbone does not appreciably change the hydration of these cations. The stability constants of the binary and ternary complexes of Cm(III), Am(III), and Eu(III) with these ligands were measured by solvent extraction in a solution of 0.1 M (NaClO₄). The size, basicity, specific M³⁺-second ligand interactions, and steric requirement of the ligands are the factors which affect the ternary complexation. Knowledge of the chemical species formed by actinide cations with organic ligands (carboxylates and aminocarboxylates), which are present in all nuclear waste, is important to understand the behavior of waste forms and the migration behavior of actinides in the environment.     

Complexation studies of Cm(III), Am(III), and Eu(III) with linear and cyclic carboxylates and polyaminocarboxylates

Solvent extraction and potentiometric titration methods have been used to measure the stability constants of Cm(III), Am(III), and Eu(III) with both linear and cyclic carboxylates and polyaminocarboxylates in an ionic strength of 0.1?mol?L^?1 (NaClO₄). Luminescence lifetime measurements of Cm(III) and Eu(III) were used to study the change in hydration upon complexation over a range of concentrations and pH values. Aromatic carboxylates, phthalate (1,2 benzene dicarboxylates, PHA), trimesate (1,3,5 benzene tricarboxylates, TSA), pyromellitate (1,2,4,5 tetracarboxylates, PMA), hemimellitate (1,2,3 benzene tricarboxylates, HMA), and trimellitate (1,2,4 benzene tricarboxylates, TMA) form only 1?:?1 complexes, while both 1?:?1 and 1?:?2 complexes were observed with PHA. Their complexation strength follows the order: PHA～TSA>TMA>PMA>HMA. Carboxylate ligands with adjacent carboxylate groups are bidentate and replace two water molecules upon complexation, while TSA displaces 1.5 water molecules of hydration upon complexation. Only 1?:?1 complexes were observed with the macrocyclic dicarboxylates 1,7-diaza-4,10,13-trioxacyclopentadecane-N,N′-diacetate (K21DA) and 1,10-diaza-4,7,13,16-tetraoxacyclooctadecane-N,N′-diacetate (K22DA); both 1?:?1 and 1?:?2 complexes were observed with methyleneiminodiacetate (MIDA), hydroxyethyleneiminodiacetate (HIDA), benzene-1,2-bis oxyacetate (BDODA), and ethylenediaminediacetate (EDDA), while three complexes (1?:?1, 1?:?2, and 1?:?3) were observed with pyridine 2,6 dicarboxylates (DPA) and chelidamate (CA). The complexes of M-MIDA are tridentate, while that of M-HIDA is tetradentate in both 1?:?1 and 1?:?2 complexes. The M-BDODA and M-EDDA complexes are tetradentate in the 1?:?1 and bidentate in the 1?:?2 complexes. The complexes of M-K22DA are octadentate with one water molecule of hydration, while that of K21DA is heptadentate with two water molecules of hydration. Simple polyaminocarboxylate 1,2 diaminopropanetetraacetate (PDTA) and ethylenediamine N,N′-diacetic-N,N′-dipropionate (ENDADP) like ethylenediaminetetraacetate (EDTA) form only 1?:?1 complexes and their complexes are hexadentate. Polyaminocarboxylates with additional functional groups in the ligand backbone, e.g., ethylenebis(oxyethylenenitrilo) tetraacetate (EGTA), and 1,6 diaminohexanetetraacetate (HDTA) or with additional number of groups in the carboxylate arms diethylenetriamine pentaacetato-monoamide (DTPA-MA), diethylenetriamine pentaacetato-bis-methoxyethylamide (DTPA-BMEA), and diethylenetriamine pentaacetato-bis glucosaamide (DTPA-BGAM) are octadentate with one water molecule of hydration, except N-methyl MS-325 which is heptadentate with two water molecules of hydration and HDTA which is probably dimeric with three water molecules of hydration. Macrocyclic tetraaminocarboxylate, 1,4,7,10-tetraazacyclododecanetetraacetate (DOTA) forms only 1?:?1 complex which is octadentate with one water molecule of hydration. The functionalization of these carboxylates and polycarboxylates affect the complexation ability toward metal cations. The results, in conjunction with previous results on the Eu(III) complexes, provide insight into the relation between ligand steric requirement and the hydration state of the Cm(III) and Eu(III) complexes in solution. The data are discussed in terms of ionic radii of the metal cations, cavity size, basicity, and ligand steric effects upon complexation.     

Characterization and comparison of Cm(III) and Eu(III) complexed with 2,6-di(5,6-dipropyl-1,2,4-triazin-3-yl)pyridine using EXAFS, TRFLS, and quantum-chemical methods

The complexation of Cm(III) and Eu(III) with 2,6-di(5,6-dipropyl-1,2,4-triazin-3-yl)pyridine (n-C3H7-BTP) in nonaqueous organic solution is studied with extended X-ray absorption spectroscopy. Bond lengths are the same in both complexes. Quantum-chemical calculations performed at different levels support this finding. On the other hand, the Cm.(n-C3H7-BTP)3 complex is formed at much lower ligand-to-metal concentration ratio than the Eu.(n-C3H7-BTP)3 complex, as shown by time-resolved laser-induced fluorescence spectroscopy. This is in good agreement with n-C3H7-BTP's high selectivity for trivalent actinides over lanthanides in liquid-liquid extraction.     

2,6-Bis(5-(2,2-dimethylpropyl)-1H-pyrazol-3-yl)pyridine as a ligand for efficient actinide(III)/lanthanide(III) separation

The N-donor complexing ligand 2,6-bis(5-(2,2-dimethylpropyl)-1H-pyrazol-3-yl)pyridine (C5-BPP) was synthesized and screened as an extracting agent selective for trivalent actinide cations over lanthanides. C5-BPP extracts Am(III) from up to 1 mol/L HNO(3) with a separation factor over Eu(III) of approximately 100. Due to its good performance as an extracting agent, the complexation of trivalent actinides and lanthanides with C5-BPP was studied. The solid-state compounds [Ln(C5-BPP)(NO(3))(3)(DMF)] (Ln = Sm(III), Eu(III)) were synthesized, fully characterized, and compared to the solution structure of the Am(III) 1:1 complex [Am(C5-BPP)(NO(3))(3)]. The high stability constant of log β(3) = 14.8 ± 0.4 determined for the Cm(III) 1:3 complex is in line with C5-BPP's high distribution ratios for Am(III) observed in extraction experiments.     

Comparison of synchronous and laser-induced fluorescence spectroscopy applied to the Eu(III)-fulvate complexation

The complexation of europium ion (Eu(III)) with a soil fulvic acid (FA) has been studied at pH 5 in 0.01 M NaClO₄ by different experimental methods, i.e. synchronous fluorescence spectroscopy (SyFS) and time resolved laser-induced fluorescence spectroscopy (TRLFS). A series of SyFS quenching spectra was obtained by increasing the Eu(III) concentration and keeping the FA concentration constant. The emission spectra and fluorescence lifetimes of the Eu(III) bound to the FA were also measured by a TRLFS system using the same solution used in the SyFS spectral measurement. From the analysis of the fluorescence data obtained by the SyFS and the TRLFS using a non-linear least-squares method, the concentration of the binding sites (C_L) of the FA accessible for the Eu(III) and the corresponding conditional stability constants (log K) were estimated. The two different methods gave rise to constants being comparable with one another. The log K and C_L values (mean ± standard deviation of three determinations) determined by the SyFS were 6.4 ± 0.2 (6.7 ± 0.1 μmol L⁻¹: by the TRLFS) and 10 ± 1 μmol L⁻¹ (7 ± 1 μmol L⁻¹: by the TRLFS), respectively. The applicability of the FA fluorescence quenching techniques for estimating the europium binding parameters was proved by the direct monitoring of the Eu(III) bound to the FA using the TRLFS system.     

New Ionic Liquid Based on the CMPO Pattern for the Sequential Extraction of U(VI), Am(III) and Eu(III)

Extraction of U(VI), Eu(III) and Am(III) has been performed from acidic aqueous solutions (HNO₃, HClO₄) into the ionic liquid [C₄mim][Tf₂N] in which a new extracting task-specific ionic liquid, based on the CMPO unit {namely 1-[3-[2-(octylphenylphosphoryl)acetamido]propyl]-3-methyl-1H-imidazol-3-ium bis(trifluoromethane)sulfonamide, hereafter noted OctPh-CMPO-IL}, was dissolved at low concentration (0.01 mol·L^?1). EXAFS and UV–Vis spectroscopy measurements were performed to characterize the extracted species. The extraction of U(VI) is more efficient than the extraction of trivalent Am and Eu using this TSIL, for both acids and their concentration range. We obtained evidence that the metal ions are extracted as a solvate (UO₂(OctPh-CMPO-IL)₃) by a cation exchange mechanism. Nitrate or perchlorate ions do not play a direct role in the extraction by being part of the extracted complexes, but the replacement of nitric acid for perchloric acid entails a drop in the selectivity between U and Eu. However, our TSIL allows a sequential separation of U(VI) and Eu/Am(III) using the same HNO₃ concentration and same nature of the organic phase, just by changing the ligand concentration.     

Visible and near-infrared intense luminescence from water-soluble lanthanide [Tb(III), Eu(III), Sm(III), Dy(III), Pr(III), Ho(III), Yb(III), Nd(III), Er(III)] complexes

The synthesis of a new ligand (1) containing a single phenanthroline (phen) chromophore and a flexibly connected diethylenetriamine tetracarboxylic acid unit (DTTA) as a lanthanide (Ln) coordination site is reported [1 is 4-[(9-methyl-1,10-phenantrol-2-yl)methyl]-1,4,7-triazaheptane-1,1,7,7-tetraacetic acid]. From 1, an extended series of water-soluble Ln.1 complexes was obtained, where Ln is Eu(III), Tb(III), Gd(III), Sm(III), Dy(III), Pr(III), Ho(III), Yb(III), Nd(III), and Er(III). The stoichiometry for the association was found 1:1, with an association constant K(A) > or = 10(7) s(-1) as determined by employing luminescence spectroscopy. The luminescence and photophysical properties of the series of lanthanide complexes were investigated in both H2O and D2O solutions. High efficiencies for the sensitized emission, phi(se), in air-equilibrated water were observed for the Ln.1 complexes of Eu(III) and Tb(III) in the visible region (phi(se) = 0.24 and 0.15, respectively) and of Sm(III), Dy(III), Pr(III), Ho(III), Yb(III), Nd(III), and Er(III) in the vis and/or near-infrared region [phi(se) = 2.5 x 10(-3), 5 x 10(-4), 3 x 10(-5), 2 x 10(-5), 2 x 10(-4), 4 x 10(-5), and (in D2O) 4 x 10(-5), respectively]. For Eu.1 and Tb.1, luminescence data for water and deuterated water allowed us to estimate that no solvent molecules (q) are bound to the ion centers (q = 0). Luminescence quenching by oxygen was investigated in selected cases.     

First-principles study of the separation of Am(III)/Cm(III) from Eu(III) with Cyanex301

The experimentally observed extraction complexes of trivalent lanthanide Eu(III) and actinide Am(III)/Cm(III) cations with purified Cyanex301 [bis(2,4,4-trimethylpentyl)dithiophosphinic acid, HBTMPDTP denoted as HL], i.e., ML(3) (M = Eu, Am, Cm) as well as the postulated complexes HAmL(4) and HEuL(4)(H(2)O) have been studied by using energy-consistent 4f- and 5f-in-core pseudopotentials for trivalent f elements, combined with density functional theory and second-order M?ller-Plesset perturbation theory. Special attention was paid to explaining the high selectivity of Cyanex301 for Am(III)/Cm(III) over Eu(III). It is shown that the neutral complexes ML(3), where L acts as a bidentate ligand and the metal cation is coordinated by six S atoms, are most likely the most stable extraction complexes. The calculated metal-sulfur bond distances for ML(3) do reflect the cation employed; i.e., the larger the cation, the longer the metal-sulfur bond distances. The calculated M-S and M-P bond lengths agree very well with the available experimental data. The obtained changes of the Gibbs free energies in the extraction reactions M(3+) + 3HL → ML(3) + 3H(+) agree with the thermodynamical priority for Am(3+) and Cm(3+). Moreover, the ionic metal-ligand dissociation energies of the extraction complexes ML(3) show that, although EuL(3) is the most stable complex in the gas phase, it is the least stable in aqueous solution.     

Quantitative description and local structures of trivalent metal ions Eu(III) and Cm(III) complexed with polyacrylic acid

The trivalent metal ion (M(III)=Cm, Eu)/polyacrylic acid (PAA) system was studied in the pH range between 3 and 5.5 for a molar PAA-to-metal ratio above 1. The interaction was studied for a wide range of PAA (0.05 mg L(-1)-50 g L(-1)) and metal ion concentrations (2x10(-9)-10(-3) M). This work aimed at 3 goals (i) to determine the stoichiometry of M(III)-PAA complexes, (ii) to determine the number of complexed species and the local environment of the metal ion, and (iii) to quantify the reaction processes. Asymmetric flow-field-flow fractionation (AsFlFFF) coupled to ICP-MS evidenced that size distributions of Eu-PAA complexes and PAA were identical, suggesting that Eu bound to only one PAA chain. Time-resolved laser fluorescence spectroscopy (TRLFS) measurements performed with Eu and Cm showed a continuous shift of the spectra with increasing pH. The environment of complexed metal ions obviously changes with pH. Most probably, spectral variations arose from conformational changes within the M(III)-PAA complex due to pH variation. Complexation data describing the distribution of complexed and free metal ion were measured with Cm by TRLFS. They could be quantitatively described in the whole pH-range studied by considering the existence of only a single complexed species. This indicates that the slight changes in M(III) speciation with pH observed at the molecular level do not significantly affect the intrinsic binding constant. The interaction constant obtained from the modelling must be considered as a mean interaction constant.     

Bicyclic and acyclic diamides: comparison of their aqueous phase binding constants with Nd(III), Am(III), Pu(IV), Np(V), Pu(VI), and U(VI)

This report describes affinity measurements for two, water-soluble, methyl-alkylated diamides incorporating the malonamide functionality, N,N,N',N' tetramethylmalonamide (TMMA) and a bicyclic diamide (1a), toward actinide metal cations (An) in acidic nitrate solutions. Ligand complexation to actinides possessing oxidation states ranging from +3 to +6 was monitored through optical absorbance spectroscopy, and formation constants were obtained from the refinement of the spectrophotometric titration data sets. Species analysis gives evidence for the formation of 1, 4, 1, and 2 spectrophotometrically observable complexes by TMMA to An(III, IV, V, and VI), respectively, while for 1a, the respective numbers are 3, 4, 2, and 2. Consistent with the preorganization of 1a toward actinide binding, a significant difference is found in the magnitudes of their respective formation constants at each complexation step. It has been found that the binding affinity for TMMA follows the well-established order An(V) < An(III) < An(VI) < An(IV). However, with 1a, Np(V) forms stronger complexes than Am(III). The complexation of 1a with Np(V) and Pu(VI) at an acidity of 1.0 M is followed by reduction to Np(IV) and Pu(IV), whereas TMMA does not perturb the initial oxidation state for these dioxocations. These measurements of diamide binding affinity mark the first time single-component optical absorbance spectra have been reported for a span of actinide-diamide complexes covering all common oxidation states in aqueous solution.     

EXAFS and time-resolved laser fluorescence spectroscopy (TRLFS) investigations of the structure of Cm(III)/Eu(III) complexed with di(chlorophenyl)dithiophosphinic acid and different synergistic agents

The complexes of trivalent actinide curium (Cm(III)) with di(chlorophenyl)dithiophosphinic acid ((ClPh)2PSSH) and three different neutral complexing agents as synergists in tert-butylbenzene are studied by EXAFS and time-resolved laser fluorescence spectroscopy (TRLFS). The results are compared with those from the corresponding europium (Eu(III)) complexes. The aim of these investigations is to understand the chemical interactions responsible for the high selectivity of the synergistic systems of (ClPh)2PSSH and neutral complexing agents tri-n-octylphosphine oxide, tributylphosphate and tris(2-ethylhexyl)phosphate for trivalent actinide cations in liquid-liquid extraction. In our structural chemistry study, we find that the inner coordination sphere of extracted Cm(III) and Eu(III) complexes are different. In all complexes the (ClPh)2PSSH is bound to the metal cation in a bidentate fashion and the oxygen donor of the neutral complexing agent used as synergist is directly coordinated to the metal cation. Comparison of the Cm(III) and Eu(III) complexes shows that Cm(III) preferentially binds to the sulfur of (ClPh)2PSSH, whereas Eu(III) is preferentially bound to oxygen. A good selectivity in liquid-liquid extraction is correlated with a high ratio of the sulfur coordination number to oxygen coordination number. This leads to the conclusion that the observed differences in the coordination structure between Cm(III) and Eu(III) complexes play an important role in the selectivity of these extraction systems.     

A time-resolved laser fluorescence spectroscopy (TRLFS) study of the interaction of trivalent actinides (Cm(III)) with calcite

Cm(III) interaction with calcite was investigated by time-resolved laser fluorescence spectroscopy (TRLFS) in the trace concentration range. Two different Cm(III)/calcite sorption species were found. The first Cm(III) sorption species consists of a curium ion bonded onto the calcite surface. The second Cm(III) sorption species has lost its complete hydration sphere and is incorporated into the calcite bulk structure. The Cm(III)/calcite complexes are characterized by their emission spectra (peak maxima at 607.5 and 618.0 nm) and their fluorescence emission lifetimes (314+/-6 and 1302+/-75 micros).     

Complexation of Cm(III) with 6-(5,6-dipentyl-1,2,4-triazin-3-yl)-2,2'-bipyridine studied by time resolved laser fluorescence spectroscopy

The complexation of Cm(III) with 6-(5,6-dipentyl-1,2,4-triazin-3-yl)-2,2'-bipyridine (C(5)-hemi-BTP) in a water-2-propanol solution is investigated by TRLFS. Upon increasing the concentration of C(5)-hemi-BTP in the Cm(III)-solution, three different species, the 1:1-, 1:2- and 1:3-complex, with emission bands at 599.9 nm, 607.3 nm, and 612.8 nm, respectively, are found. Hereby, slow complexation kinetics is observed which no other BTP-type ligand has shown up to now. The species distributions for various ligand concentrations are determined and stability constants are derived (log β(03) = 12.1 ± 0.1). As extraction with hemi-BTP ligands is only possible in the presence of a lipophilic anion, the complexation of Cm(III) with C(5)-hemi-BTP and 2-bromohexanoic acid is investigated to deduce the species formed in the extraction process. It is found that Cm(III) is coordinated by two C(5)-hemi-BTP ligands and one 2-bromohexanoate ligand. This species formed in aqueous solution is identical to the one from the extraction process.     

Separation of Am(III), Cm(III) and Eu(III) by electro-spun polystyrene-immobilized CyMe4-BTPhen

The synthesis of a novel 5-(4-vinylphenyl)-CyMe₄-BTPhen actinide selective ligand using selenium free synthetic procedures is reported. For the first time, we report the electrospinning of this actinide selective ligand into a polystyrene fiber and investigate its selective removal of Am(III) from Eu(III) and Am(III) from Cm(III). At 4?M HNO₃, the resulting fibrous solid extractant produced separation factors of SF_Am/Eu?≈?57 and a small, but significant separation of SF_Am/Cm?≈?2.9.     

Complexation of lactate with neodymium(III) and europium(III) at variable temperatures: studies by potentiometry, microcalorimetry, optical absorption, and luminescence spectroscopy

The complexation of neodymium(III) and europium(III) with lactate was studied at variable temperatures by potentiometry, absorption spectrophotometry, luminescence spectroscopy, and microcalorimetry. The stability constants of three successive lactate complexes (ML(2+), ML(2)(+), and ML(3)(aq), where M stands for Nd and Eu and L stands for lactate) at 10, 25, 40, 55, and 70 °C were determined. The enthalpies of complexation at 25 °C were determined by microcalorimetry. Thermodynamic data show that the complexation of trivalent lanthanides (Nd(3+) and Eu(3+)) with lactate is exothermic and the complexation becomes weaker at higher temperatures. Results from optical absorption and luminescence spectroscopy suggest that the complexes are inner-sphere chelate complexes in which the protonated α-hydroxyl group of lactate participates in the complexation.     

Characterization and quantification of Sm(III)/ and Cm(III)/clay mineral outer-sphere species by TRLFS in D2O and EXAFS studies

In order to assess the long-term safety of deep radioactive waste repositories, a precise characterization of the different sorption processes on a molecular basis and the exact definition of geochemical boundary conditions for their relevance are of immense importance. Through sorption on various minerals the migration of radionuclides will be hindered and their retention will be ensured. Using time-resolved laser fluorescence spectroscopy (TRLFS) and extended X-ray absorption fine structure (EXAFS) spectroscopy, it was possible to identify outer-sphere sorbed trivalent lanthanides and actinides onto different montmorillonites and illite. Furthermore, the quantification of Cm(III)/clay outer-sphere sorption in D(2)O at different ionic strengths was shown. The results were confirmed by ion exchange model calculations. Finally, the structural parameters of a Sm(III)/clay outer-sphere complex were obtained by EXAFS measurements.     

Sorption speciation of lanthanides/actinides on minerals by TRLFS, EXAFS and DFT studies: a review

Lanthanides/actinides sorption speciation on minerals and oxides by means of time resolved laser fluorescence spectroscopy (TRLFS), extended X-ray absorption fine structure spectroscopy (EXAFS) and density functional theory (DFT) is reviewed in the field of nuclear disposal safety research. The theoretical aspects of the methods are concisely presented. Examples of recent research results of lanthanide/actinide speciation and local atomic structures using TRLFS, EXAFS and DFT are discussed. The interaction of lanthanides/actinides with oxides and minerals as well as their uptake are also of common interest in radionuclide chemistry. Especially the sorption and inclusion of radionuclides into several minerals lead to an improvement in knowledge of minor components in solids. In the solid-liquid interface, the speciation and local atomic structures of Eu(III), Cm(III), U(VI), and Np(IV/VI) in several natural and synthetic minerals and oxides are also reviewed and discussed. The review is important to understand the physicochemical behavior of lanthanides/actinides at a molecular level in the natural environment.     

Thermodynamics and the structural aspects of the ternary complexes of Am(III), Cm(III) and Eu(III) with Ox and EDTA + Ox

The stability constants and the associated thermodynamic parameters of formation of the binary and the ternary complexes of Am(3+), Cm(3+) and Eu(3+) were determined by a solvent extraction to measure the variation in the distribution coefficient with temperature (0-60 degrees C) for aqueous solutions of I = 6.60 m (NaClO(4)). The formation of ternary complexes is favored by both the enthalpy (exothermic) and the entropy (endothermic) values. (13) C NMR, TRLFS and EXAFS spectral data was used to study the coordination modes of the ternary complexes. In the formation of the complex M(EDTA)(Ox)(3-), the EDTA retained all its coordination sites with Ox binding via two carboxylates and with one water of hydration remaining attached to the M(3+). In the complex M(EDTA)(Ox)(2)(5-), one carboxylate, either from EDTA or Ox, is not bounded to M(3+) and there were no water of hydration attached to these cations.     

Distribution behavior of U(VI), Am(III) and Eu(III) on diglycolamide based extraction chromatographic resin in perchloric acid medium

An attempt has been made in the present work to investigate the role of anion for the uptake of Am(III)/Eu(III)/U(VI) by extraction chromatography (EXC) resin incorporating tetra-n-octyl-3-oxapentanediamide, commonly referred to as tetra-octyl diglycolamide (TODGA). In contrast to the nitric acid, perchloric acid medium favors extraction of trivalent metal ions even at low acidity (pH 2) and is almost insensitive to the acidity up to 5 M. Exceptionally large distribution coefficients (10⁵–10⁶) in the wide range of perchlorate concentration (10^?2–5 M) is quite unusual and is by far the largest reported in the literature for Am(III)/Eu(III). Thermodynamic data suggests the possibility of inner sphere/cation exchange mechanism involving TODGA aggregates at higher acidity but outer sphere/cation exchange mechanism at low acidity for Eu(III). There is a possibility of employing TODGA based EXC resin for the remediation of liquid waste (contaminated with long lived transuranics like ^241/243Am and ²⁴⁵Cm) in the wide range of acidity.