Tetrakis(triphenylphosphine oxide) complexes of the lanthanide nitrates; synthesis, characterisation and crystal structures of [La(Ph3PO)4(NO3)3]·Me2CO and [Lu(Ph3PO)4(NO3)2]NO3

The reaction of Ln(NO₃)₃·6H₂O (Ln=La, Ce, Pr or Nd) with a sixfold excess of Ph₃PO in acetone formed [Ln(Ph₃PO)₄(NO₃)₃]·Me₂CO. The crystal structure of the La complex shows a nine-coordinate metal centre with four phosphine oxides, two bidentate and one monodentate nitrate groups, and PXRD studies show the same structure is present in the other three complexes. In CH₂Cl₂ or Me₂CO solutions, ³¹P NMR studies show that the complexes are essentially completely decomposed into [Ln(Ph₃PO)₃(NO₃)₃] and Ph₃PO. Similar reactions in ethanol gave [Ln(Ph₃PO)₃(NO₃)₃] only. In contrast for Ln=Sm, Eu or Gd, only the [Ln(Ph₃PO)₃(NO₃)₃] are formed from either acetone or ethanol solutions. For the later lanthanides Ln=Tb–Lu, acetone solutions of Ln(NO₃)₃·6H₂O and Ph₃PO gave [Ln(Ph₃PO)₃(NO₃)₃] only, even with a large excess of Ph₃PO, but from cold ethanol [Ln(Ph₃PO)₄(NO₃)₂]NO₃ (Ln=Tb, Ho–Lu) were obtained. The structure of [Lu(Ph₃PO)₄(NO₃)₂]NO₃ shows an eight-coordinate metal centre with four phosphine oxides and two bidentate nitrate groups. In solution in CH₂Cl₂ or Me₂CO the tetrakis-complexes show varying amounts of decomposition into mixtures of [Ln(Ph₃PO)₃(NO₃)₃], [Ln(Ph₃PO)₄(NO₃)₂]NO₃ and Ph₃PO as judged by ³¹P{¹H} NMR spectroscopy. The [Ln(Ph₃PO)₃(NO₃)₃] also partially decompose in solution for Ln=Dy–Lu, forming some tetrakis(phosphine oxide) species.     

Substituted cyclopentadienyl ligands—10. Intramolecular steric interactions in [(η-C5H3(SiMe3)2)Mo(CO)2(L)I]

Reaction of C₅H₄(SiMe₃)₂ with Mo(CO)₆ yielded [(η⁵-C₅H₃(SiMe₃)₂)Mo(CO)₃]₂, which on addition of iodine gave [(η⁵-C₅H₃(SiMe₃)₂Mo(CO)₃I]. Carbonyl displacement by a range of ligands: [L = P(OMe)₃, P(OPrⁱ)₃,P(O-o-tol)₃, PMe₃, PMe₂Ph, PMePh₂, PPh₃, P(m-tol)₃] gave the new complexes [(η⁵-C₅H₃(SiMe₃)₂ MO(CO)₂(L)I]. For all the trans isomer was the dominant, if not exclusive, isomer formed in the reaction. An NOE spectral analysis of [(η⁵-C₅H₃(SiMe₃)₂)Mo(CO)₂(L)I] L = PMe₂Ph, P(OMe)₃] revealed that the L group resided on the sterically uncongested side of the cyclopentadienyl ligand and that the ligand did not access the congested side of the molecule. Quantification of this phenomenon [L = P(OMe)₃] was achieved by means of the vertex angle of overlap methodology. This methodology revealed a steric preference with the trans isomer (less congestion of CO than I with an SiMe₃ group) being the more stable isomer for L = P(OMe)₃.     

Synthesis and crystal structure of the novel trimanganese tetrathiolate incomplete cubane: [Mo(η-C5H5)2(H)CO][Mn3(CO)9(μ-SC6H5)4]

An unexpected trimanganese(I) tetrathiolate-bridged complex, [Mn₃(CO)₉(μ-SC₆H₅)₄]⁻, with an incomplete cubane structure, was obtained by thermal reaction of [Mn₂(CO)₁₀] with [Mo(η⁵-C₅H₅)₂(SC₆H₅)₂]. The structure, established by single-crystal X-ray diffraction studies, shows the cation, [Mo(η⁵-C₅H₅)₂(H)CO]⁺, directed towards the vacant site of the cubane structure. Possible routes by which the anion and the cation could be formed are discussed.     

Synthesis and molecular structure of Ba5(μ5-OH)[μ3-OCH(CF3)2]4[μ2-OCH(CF3)2]4 [OCH(CF3)2](THF)4(H2O)·THF: a source of barium fluoride

The reaction between metallic barium and fluoroisopropanol or alcoholysis of [Ba(OPrⁱ)₂] produces a pentanuclear fluoroalkoxide. Its X-ray structure determination showed its formulation to correspond to Ba₅(μ₅-OH)[μ₃-OCH(CF₃)₂]₄[μ₂-OCH(CF₃)₂]₄ [OCH(CF₃)₂](THF)₄(H₂O)·THF. The metallic core is based on a square pyramid encapsulating an hydroxo ligand. In addition to the barium---alkoxide bonds [2.53(3)–2.86(3) Å] neutral O-donors, four THF [2.82(2)–2.86(3) Å] and one H₂O [2.79(3) Å] and secondary barium---fluorine interactions [2.99(2)–3.31(2) Å] ensure high coordination numbers, from 9 to 11 for the metal centers. Hydrogen bonding between the apical fluoroisopropoxide, the water molecule and one THF molecule, non-bonded to a metal center, accounts for the stability of the hydrate and illustrates the Lewis acidity of fluoroalkoxides. Thermal decomposition leads to BaF₂.     

A localized molecular orbital study on the bonding of> Mo3S4]2Mo> and> Mo3S4]CuI> versus (C6H6)2Cr and C6H6Cr(CO)3

The energy-localized CNDO/2 molecular orbitais have been calculated for the clusters containing molybdenum, > {Mo₃S₄₂Mo}⁸⁺ and> Mo₃S₄]CuI> ⁴⁺, versus the prototype arene-metal sandwich (C₆H₆)₂Cr and half-sandwich complexes C₆H₆Cr(CO)₃. The bonding characteristics of these compounds are described from a localization bonding viewpoint. There are two typical M-arene and M-[Mo₃S₄] bondings. One is formed by electron donation from the three-center two-electron π-bonds in the arene or [Mo₃S₄]⁴⁺ ligands into the vacant hybrid orbitais of the “stranger” metal atom. In the other M-arene or M-[Mo₃S₄] bond there is very little donation by the lone electron pair occupying the d AOs of the “stranger” metal atom to the arene or [Mo₃S₄]⁴⁺ ligands. The analogy of the ligand [Mo₃S₄]⁴⁺ in the clusters studied with the ligand benzene is also briefly discussed.     

Influence of the modification of the ligands on hex-1-ene hydroformylation catalyzed by [HRh{P(OPh)3}4] and [HRh(CO){P(OPh)3}3]. Catalytic activity of the sytem [HRh}P(OPh)3}4]+Cp2Zr(CH2PPh2)2

A study has been carried out of the catalytic activity of the systems formed by [HRh{P(OPh)₃}₄] or [HRh(CO){P(OPh)₃}₃] with the modifying ligands P(OPh)₃, PPh₃, diphos and Cp₂Zr(CH₂PPh₂)₂ in hydroformylation of hex-1-ene (at p = 5 bar). The best results were obtained with the system [HRh{P(OPh)₃}₄]+Cp₂Zr(CH₂PPh₂)₂ (75–85% yeild of aldehydes).     

Perfluormethyl-element-liganden : XXXI. Ligandeneigenschaften von Me2PP(CF3)2 und Me2AsP(CF3)2

The coordinating properties of the trifluoromethyl elemental compounds Me₂PP(CF₃)₂ and Me₂AsP(CF₃)₂ have been studied by the synthesis and spectroscopic investigations (IR, NMR, MS) of their complexes cis-M(CO)₄L₂ (A), [(CO)₄ML]₂ (B) and [(CO)₅M]₂L (C) (M = Cr, Mo, W). Complexes of type A with L = Me₂PP(CF₃)₂ are obtained in good yield by reaction with M(CO)₄NBD (NBD = norbornadiene), whereas with L = Me₂AsP(CF₃)₂ the homobinuclear compounds B are formed. The attempt to prepare the cis-M(CO)₄[Me₂AsP(CF₃)₂]₂ complexes by treating M(CO)₄(Me₂AsH)₂ with P₂(CF₃)₄ is successful only for M = W. Binuclear compounds of type B or C, in general, can be prepared by stepwise reaction of the ligands with either M(CO)₄NBD or M(CO)₅THF.     

Syntheses and X-ray crystal structures of [Co(η-CO3)(NH3)4](NO3)·0.5H2O and [(NH3)3Co(μ-OH)2(μ-CO3)Co(NH3)3][NO3]2·H2O

[Co(η²-CO₃)(NH₃)₄](NO₃)·0.5H₂O and [(NH₃)₃Co(μ-OH)₂(μ-CO₃)Co(NH₃)₃][NO₃]₂·H₂O were prepared by prolonged aerial oxidation of a solution of Co(NO₃)₂·6H₂O and ammonium carbonate in aqueous ammonia. The formation of these side products highlights the richness of the chemistry of these systems and the possibility of by products if methods are not strictly adhered to. The X-ray crystal structures of [Co(η²-CO₃)(NH₃)₄][NO₃]·0.5H₂O and [(NH₃)₃Co(μ-OH)₂(μ-CO₃)Co(NH₃)₃][NO₃]₂·H₂O reveal a monomeric octahedral cobalt center with η²-bound CO₃²⁻ in the former, while the latter consists of a dimeric array where the two cobalt centers are bridged by two OH⁻ and one μ₂-CO₃²⁻ groups with three terminal NH₃ ligands for each Co center. In both complexes extensive hydrogen bonding interactions are evident.     

A new homobimetallic arenediyl diplatinum(II) unit as building block for macromolecular synthesis. X-ray crystal structure of [C6H2{CH2NMe2}2-1,5-{PtCl(PPh3)}2-2,4]

Treatment of the diaminobenzene [C₆H₄{CH₂NMe₂}₂-1,3] (NCN-H, 1) with one or two equivalents of cis-PtCl₂(DMSO)₂ leads to exclusive formation of the doubly cycloplatinated species [C₆H₄{CH₂NMe₂}₂-1,5-{PtCl(DMSO)}₂-2,4] (3), which upon addition of triphenylphosphine yields the bisphosphine adduct [C₆H₄{CH₂NMe₂}₂-1,5-{PtCl(PPh₃)}₂-2,4] (4). The X-ray molecular structure of 4 revealed the presence of highly distorted square planar Pt(II) centers which is caused by close proximity of the two phosphine donor ligands. Complexes of type 3 can be regarded as suitable starting materials for the directional build-up of larger macromolecular structures.     

Reductive nitrosylation of tetraoxometallates—XVII. Molybdate-hydroxylamine-cyanide reaction, and synthesis and characterization of K2[Mo(NO)(CN)5] and (NMe4)2[Mo(NO)(CN)4]

A reaction condition is established which determines the nature of the products in the molybdate-hydroxylamine-cyanide reaction. With hydroxylamine always used in excess, it is the hydroxyl ion concentration of the reaction mixture which plays a vital role in determining whether K₄[Mo(NO)(CN)₅] or K₂[Mo(NO)(CN)₅] is obtained exclusively. The latter product is hereby reported for the first time. Its powder diffractogram being typical of a cubic system, a gross structural characterization has been made possible. The former under aqueous, aerobic conditions yields a new product, (NMe₄)₂[Mo(NO)(CN)₄].     

Ein beitrag zur darstellung und reaktivität der η-allyliridium-komplexe [Ir(η-2-RC3H4) (PPr3)2]

The η³-allyliridium complexes [Ir(η³-2-RC₃H₄)(PⁱPr₃)₂] (2, 3) have been prepared in a one-pot reaction from [IrCl(C₂H₄)₂]₂, 2-RC₃H₄Li and PⁱPr₃ in 70% yield. Compounds 2 and 3 react spontaneously with H₂ to give [IrH₅(PⁱPr₃)₂] (7) and with excess PhC=CH and MeCCH to give [Ir(CCPh)₃(PⁱPr₃)₂] (5) and [Ir(CCMe)₂(CMe=CH₂)(PⁱPr₃)₂] (6), respectively. From 2 (or 3) and two equivalents of PhCCH the complex [IrH(CCPh)₂(PⁱPr₃)₂] (4) has been obtained. Treatment of 2 or 3 with CF₃CO₂H does not lead to a cleavage of the allyl-metal bond but affords the allyl(hydrido)-iridium(III) complexes [IrH(η³-2-RC₃H₄)(η¹-P₂CCF₃)(PⁱPr₃)₂] (8, 9) in almost quantitative yield.     

Synthesis and derivative chemistry of [Ru2(μ-PPh2) (μ-OH) 2(μ-p-cymene) 2]

The cationic diphenylphosphido-bridged compound [Ru₂(μ-PPh₂)(μ-OH)₂(η⁶-p-cymene)₂][PF₆) (2) has been prepared by reaction of the tri-μ-hydroxo complex [Ru₂(μ-OH)₃(η-p-cymene)₂][PF₆] (1) with diphenylphosphine. Complex 2 eliminates water on reaction with protic acids, incorporating the conjugate base of the added acid as a bridging ligand. Formic acid, acetic acid, phenol, and aniline react with 2 to give the monosubstituted compounds [Ru₂(μ-PPh₂)(μ-OH)(μ-L)(η⁶-p-cymene)₂]PF₆] (L = HCO₂, MeCO₂, OPh, or NHPH), whereas methanol, thiophenol, 1,2-benzenedithiol, hydrochloric acid and isopropanol afford the disubstituted derivatives [Ru₂(μ-PPh₂)(μ-L)₂(η⁶-p-cymene)₂]PF₆] (L = OMe, SPh, S₂C₆H₄, Cl, or H).     

Rhenium(I) methoxo carbonyl complexes containing tetraphosphine or triphosphine ligands; facile separation and X-ray crystallographic studies of d/l- and meso-[{Re2(μ-OMe)2(CO)6}2(μ,μ′-1,1,4,7,10,10-hexaphenyl-1,4,7,10-tetra-phosphadecane)]

Reaction of the activated mixture of Re₂(CO)_10, Me₃NO and MeOH with a 1:1 mixture of rac (d/l)- and meso-1,1,4,7,10,10-hexaphenyl-1,4,7,10-tetraphosphadecane (hptpd) yields a mixture of (d/l)- and meso-[{Re₂(μ-OMe)₂(CO)₆}₂(μ,μ′-hptpd)] 1. The diastereomers can be easily separated by selective dissolution of d/l-1 in benzene, and give clearly distinguishable ¹H- and ³¹P-NMR spectra. The fluxional behavior of d/l-1 in solution has been studied by variable-temperature ¹H- and ³¹P-{¹H}-NMR spectroscopy. The crystal structures of both d/l- and meso-1 have been determined. Both molecules consist of two {Re₂(μ-OMe)₂(CO)₆} moieties which are bridged by the two P---CH₂---CH₂---P moieties of the hptpd ligand. Whilst the molecules of meso-1 possess crystallographic i-symmetry, those of d/l-1 do not have any crystallographic symmetry. These diastereomers therefore give clearly distinguishable Raman spectra in the solid state. Reaction of tris[2-(diphenylphosphino)ethyl]phosphine (tdppep) with the activated mixture affords the complex [{Re₂(μ-OMe)₂(CO)₆}(μ,η²-tdppep)] 2, and the analogous reaction involving bis[2-diphenylphospinoethyl)phenylphosphine (triphos) gives [{Re₂(μ-OMe)₂(CO)₆}(μ,μ′,η³-triphos){Re₂(CO)₉}] 3 and [{Re₂(μ-OMe)₂(CO)₆}(μ,η²-triphos)] 4.     

Oxidative addition of 2,2′-dipyridyl disulfphide to the cluster [Os3(CO)10(MeCN)2]

The cluster [Os₃(CO)₁₀(MeCN)₂] reacts with 2,2′-dipyridyl disulphide (1, pySSpy) to give a range of oxidative addition products which were separated by TLC on silica and crystallization : [Os₃(pyS)₂(CO)₁₀] (2), [Os₃(pyS)₂(CO)₉] (3), [Os₂(pyS)₂(CO)₆] (4) and [Os(pyS)₂(CO)₂] (5), together with some of the hydride [Os₃H(pyS)(CO)₉] (6), which is not an expected oxidative addition product. The X-ray crystal structures of compounds 2, 3, 4 and 6 (compounds 2 and 6 occurring within a single crystal), together with the known structure of compound 5, reveal several modes of pyS bonding : chelating pyS, μ₂-pyS (both sulphur-bonded and nitrogen, sulphur-bonded) and μ₃-pyS.     

The evaluation of singlet-triplet separations for [W2(μ-H)(μ-Cl)Cl4(μ-dppm)2] and [W2(μ-H)2 (μ-O2CC6H5)2(P(C6H5)3)2] based on P NMR and crystallographic data

The singlet-triplet separations for the edge-sharing bioctahedral (ESBO) complex W₂(μ-H)(μ-Cl)(Cl₄(μ-dppm)₂ · (THF)₃ (II) has been studied by ³¹P NMR spectroscopy. The structural characterization of [W₂(μ-H)₂(μ-O₂CC₆H₅)₂Cl₂(P(C₆H₅)₃)₂] (I) by single-crystal X-ray crystallography has allowed the comparison of the energy of the HOMOLUMO separation determined using the Fenske-Hall method for a series of ESBO complexes with two hydride bridging atoms, two chloride bridging atoms and the mixed case with a chloride and hydride bridging atom. The complex representing the mixed case, [W₂(μ-H)(μ-Cl)Cl₄(μ-dppm)₂ · (THF)₃] (II), has been synthesized and the value of −2J determined from variable-temperature ³¹P NMR spectroscopy.     

Reaction of trans-[Pt(H)2(PCy3)2] with C60 reductive elimination of H2 and formation of [Pt(PCy3)2(η-C60)]

Reaction of trans-[Pt(H)₂(PCy₃)₂], 1, with [60]fullerene at room temperature affords [Pt(PCy₃)₂(η²-C₆₀)], 2, in nearly quantitative yield. The most probable reaction pattern is the insertion of a fullerene 6,6 junction onto a Pt-H bond yielding an η¹ alkyl derivative which, after hydrogen extrusion, gives 2. On the other hand, addition of 1 to different electron-deficient olefins, such as dimethyl maleate and fumarate, furnishes mixtures of both η¹ metal—alkyl and η² metal—olefin derivatives. If tetrachloroethylene is used as 2π component, trans-[PtCl(H)(PCy₃)₂] forms exclusively.     

Structural characterisation of [Pt(NH3)4]2[W(CN)8][NO3]·2H2O donor–acceptor complex

The bimetallic [Pt(NH₃)₄]₂[W(CN)₈][NO₃]·2H₂O is characterised by single-crystal X-ray diffraction [S.G.P2₁/m(11), a=8.0418(7), b=19.122(2), c=9.0812(6) Å, Z=2]. All platinum centres have the square-plane D_4h geometry with average dimensions Pt(1)–N 2.042(2) and Pt(2)–N 2.037(10) Å. The octacyanotungstate anion has the square-antiprismatic D_4d configuration with average dimensions W(1)–C 2.164(13), C–N 1.140(12), W(1)–N 3.303(5) Å. The structure exhibits two different mutual orientations of Pt versus W units resulting in Pt(2)–W(1), W(1)^* separations of 4.77(2), 4.55(2)^* and Pt(1)–W(1) of 6.331(8) Å. A centrosymmetric structure reveals groups of two distinct columns: the first is formed by intercalated NO₃⁻ between parallel [Pt(1)(NH₃)₄]²⁺ planes and the second consists of [W(CN)₈]³⁻ interlayered by, parallel to square faces of W-antiprisms, [Pt(2)(NH₃)₄]²⁺. The structure is stabilised through a three-dimensional hydrogen bond network via nitrogen atoms of cyanide ligands, hydrogen atoms of NH₃ ligands, water molecules and oxygen atoms of NO₃⁻ counteranions. The vibrational pattern and the range of ν(CN) frequencies attributable to the electronic environment of W(V) and W(IV) are consistent with the ground state Pt(II)↔W(V) charge transfer.     

The synthesis of phosphine derivatives of [Fe4N(CO)12]: Crystal structures of [Fe4N(CO)9(NO)(PPh3)2], [HFe4N (CO)11)PPh3)] and [(PPh3)2N][Fe4N(CO)11(PMe2Ph)]

Phosphines react with butterfly tetranuelear nitrido-iron clusters, [Fe₄N(CO)₁₂]⁻ and [Fe₄N(CO)₁₁(NO)], to give mono- and di-substituted complexes. X-Ray analyses of the title compounds showed that the phosphine ligands are bound to the wing-tip atoms.     

The coordinatively unsaturated cluster cations [Pt3{M(CO)3}(μ-Ph2PCH2PPh2)3] (M = Re, Mn)

The coordinatively unsaturated cluster [Pt₃(μ₃-CO)(μ-dppm)₃]²⁺ (1, dppm = Ph₂PCH₂PPh₂) reacts with Na⁺[M(CO)₅]⁻ to give the mixed metal clusters [Pt₃{M(CO)₃}(μ-dppm)₃]⁺ (M = Re, 2; Mn, 3). The new clusters are characterized by spectroscopic methods and, for M = Re, by an X-ray structure determination. The Pt₃Re core in 2 is tetrahedral with particularly short metal-metal distances.     

Structural study of Mn2(CO)8[P(NMe2)3]2

An X-ray crystal structure determination for the bimetallic complex Mn₂(CO)₈-[P(NMe₂)₃]₂ reveals that the P(NMe₂)₃ ligands are trans to the Mn---Mn bond and the Mn---Mn bond distance is relatively long, 2.946(1) Å.