Investigation of Solid-Solid Interactions between Pure and Li2O-Doped Magnesium and Ferric Oxides

The results obtained showed that the addition of small amounts of LiNO₃ to the reacting mixed solids, consisting of equimolar proportion of Fe₂O₃ and basic MgCO₃ much enhanced the thermal decomposition of magnesium carbonate. The addition of 12 mol% LiNO₃ (6 mol% Li₂O) decreased the decomposition temperature of MgCO₃ from 525.5 to362°C. MgO underwent solid–solid interaction with Fe2O3 at temperatures starting from800°C yielding MgFe₂O₄. The amount of ferrite produced increased by increasing the precalcination temperature of the mixed solids. However, the completion of this reaction required prolonged heating at elevated temperature above 1100°C. Doping with Li₂O much enhanced the solid–solid interaction between the mixed oxides leading to the formation of MgFe₂O₄ phase at temperatures starting from 700°C. The addition of 6 mol% Li₂O to the mixed solids followed by precalcination at 1050°C for 4 h resulted in complete conversion of the reacting oxides into magnesium ferrite. The heat treatment of pure and doped solids at 900–1050°C effected the disappearance of most of IR transmission bands of the free oxides with subsequent appearance of new bands characteristic for MgFe₂O₄ structure. The promotion effect of Li2O towards the ferrite formation was attributed to an effective increase in the mobility of the various reacting cations. The activation energy of formation (ΔE) of magnesium ferrite was determined for pure and variously doped solids and the values obtained were 203, 126, 95 and 61 kJ mol⁻¹ for pure mixed solids and those treated with 1.5, 3.0 and 6.0 mol% Li₂O, respectively. This revised version was published online in August 2006 with corrections to the Cover Date.     

Effect of strontium substitution on the activity of La2?xSrxNiO4 (x = 0.0–1.2) in NO decomposition

The aim of this work is to study the effect of Sr substitution on the redox properties and catalytic activity of La_2−x Sr _x NiO₄ (x = 0.0–1.2) for NO decomposition. Results suggest that the x = 0.6 sample shows the highest activity. The characterization (TPD, TPR, etc.) of samples indicates that the x = 0.6 sample possesses suitable abilities in both oxidation and reduction, which facilitates the proceeding of oxygen desorption and NO adsorption. At temperature below 700°C, the oxygen desorption is difficult, and is the rate-determining step of NO decomposition. With the increase of reaction temperature (T > 700°C), the oxygen desorption is favorable and, the active adsorption of NO on the active site (NO + V _o + Ni²⁺ → NO⁻-Ni³⁺) turns out to be the rate-determining step. The existence of oxygen vacancy is the prerequisite condition for NO decomposition, but its quantity does not relate much to the activity. Supported by the National Hi-Tech Research and Development Program of China (863 Program)(Grant No. 2004CB 719502) and the National Natural Science Foundation of China (Grant No. 20177022)     

An ultra-low hydrolysis sol-gel route for titanosilicate xerogels and their characterization

In this work TiO₂-SiO₂ xerogels were prepared through an ultra low hydrolysis method using titanium and silicon alkoxide. The samples were heat treated to 500°C. The xerogels were characterized using TGA/DTA, FTIR, XRD and TEM. The samples showed the formation of Si–O–Ti bridges by its characteristic vibration within 925–960 cm⁻¹ range. Si–O–Si bond angles were calculated using the central force network model. The TiO₂ in all the samples crystallized on heat treatment to 500°C. The crystallite size calculated using the Scherer formula from the XRD was verified from the Transmission Electron Micrograph. Samples heat treated to 350°C remained amorphous and hence could be used as hosts for biomaterials and organic optical materials.     

EDTA assisted sol–gel synthesis of ZrW2O8

A novel sol–gel synthetic route using water-soluble precursor salts is presented as a synthetic path for a high-purity negative thermal expansion material, ZrW₂O₈. This synthetic route involves a sol–gel method with the use of EDTA as complexing agent. The aqueous solution is transformed into a ceramic material after a two-step heat treatment: gelation at 60 °C and reactive sintering at 1,180 °C. The decomposition of the gel is monitored with infrared spectroscopy and TGA. The high-temperature heat treatment results in ZrW₂O₈ with its characteristic negative thermal expansion behaviour α_{[75–130 °C]}: −9.8 ± 1.6 μm/m °C and α_{[175–300 °C]}: −1.2 ± 0.2 μm/m °C.     

Synthesis and thermal decomposition of potassium peroxotitanate to K2Ti2O5

Potassium peroxotitanate was synthesized by the peroxo method. During the thermal decomposition K₂Ti₂O₅ can be obtained. The isothermal conditions for decomposition of K₂[Ti₂(O₂)₂(OH)₆]·3H₂O were determined on the base of DTA, TG and DSC results. DTA and TG curves were recorded in the temperature range 20 and 900°C at a heating rate of 10°C min^–1. The obtained intermediate compounds were characterized by means of quantitative analysis and IR spectroscopy. The mechanism of thermal decomposition of K₂[Ti₂(O₂)₂(OH)₆]·3H₂O to K₂Ti₂O₅ was studied. The optimal conditions for obtaining K₂Ti₂O₅ were determined (770°C for 10 h).     

The NiFe2O4 - MgFe2O4 series as electrode materials for electrochemical reduction of NO x

Solid solutions of spinel-type oxides with the composition (x = 0.0, 0.3, 0.5, 0.6, 1.0) were prepared with the glycine-nitrate combustion synthesis (x = 0.0, 0.3, 0.5, 0.6) and the citric-acid combustion synthesis (x = 1.0). The oxides were used as electrode materials in a pseudo-three-electrode setup in the temperature range of 400–600 °C. Cyclic voltammetry and electrochemical impedance spectroscopy were used to characterize the electrochemical behavior in 1% NO and 10% O₂. Measurements show that NiFe₂O₄ has relatively high cathodic activity in both NO and O₂, whereas MgFe₂O₄ shows much higher activity in NO compared to O₂. MgFe₂O₄ was also measured with cyclic voltammetry in 1% NO₂ and different gas mixtures of NO and O₂ at 300 and 400 °C. Results show that the cathodic activities (−0.6 V) are relatively high with current ratios, , ranging from 10.1–167.7 and with a maximum at 400 °C. Dilatometry measurements were performed on the materials in air up to 1,000 °C, and they showed that the Curie temperature could be detected for all samples. Four-point DC resistivity measurements at elevated temperatures show that Ni_0.4Mg_0.6Fe₂O₄ has the highest conductivity, whereas Ni_0.7Mg_0.3Fe₂O₄ and NiFe₂O₄ have the highest conductivity at lower temperatures.     

Sol–gel processing of IrO<Subscript>2</Subscript>–TiO<Subscript>2</Subscript> mixed metal oxides based on a hexachloroiridate precursor

Mixed IrO₂–TiO₂ oxides were prepared by the sol–gel method upon acid-catalysed hydrolysis of an iridium solution in ethanol mixed with titanium tetraethoxide in ethanol. The iridium solution was obtained by reaction of the sodium hexachloroiridate(IV) precursor in the presence of sodium ethoxide in ethanol. Gels were formed in all but the high-Ir samples. Analysis of the dried gels showed minority-phase enrichment at the surface and the presence of Ir(III), while microscopy showed evidence for dispersed iridium-containing nanoparticles (1–20 nm in diameter). XRD powder patterns of the calcined material showed peaks due to a small amount of crystalline NaCl impurity which could be removed by washing. This left amorphous phases, except in the Ir:Ti 3:2 case, which showed evidence for the presence of separate crystalline oxide phases: anatase, IrO₂ and Ti _x Ir_1−x O₂.     

Electrochemical reduction of NO on La2-x Sr x NiO4 based electrodes

The series La_2 − x Sr _x NiO₄ (x = 0.0, 0.05, 0.15, 0.25, 0.35, and 1.0) was tested for functionality as electrode materials for direct electrochemical reduction of NO. The materials were tested using cyclic voltammetry in 1% NO and 10% O₂ in Ar on a cone-shaped electrode. The best materials for the electrochemical reduction of NO are La₂NiO₄ and LaSrNiO₄, which have current densities for NO reduction 1.82 and 7.09 times higher, respectively, than for O₂ at 400 °C. Increasing the temperature decreased the ability to reduce NO before O₂ while the activity increased. The adsorbed species during direct decomposition was attempted, clarified using X-ray absorption near-edge structure experiments and thermogravimetry, but no conclusive results were obtained.     

Preparation of Ba(Ti,Sn)O<Subscript>3</Subscript> thin films by PVP-assisted sol–gel method and their dielectric properties

Ba(Ti_1−x Sn _x )O₃ (x = 0.10 or 0.15) thin films were deposited on Si(100) and Pt(111)/TiO _x /SiO₂/Si(100) substrates via sol–gel spin-coating. Crack-free thin films could be obtained by single-step deposition, where the thickness was about 0.46 and 0.29 μm at 1000 and 2000 rpm, respectively. Circular delaminated parts 100 μm in diameter, however, tended to appear in thicker films deposited at 1000 rpm. On both kinds of substrates, the films were crystallized between 500 and 600 °C, where the perovskite phase emerged as the primary phase, and the formation of single-phase perovskite was basically achieved between 700–800 °C. The films deposited on Pt(111)/TiO _x /SiO₂/Si(100) substrates, however, tended to have small SnO₂ and BaCO₃ diffraction peaks, which decreased with increasing spinning rate. The dielectric properties were evaluated on the films deposited on Pt(111)/TiO _x /SiO₂/Si(100) substrates at 2000 rpm. The films prepared by single-step depositions had dielectric constants of 350 and 230, and dielectric loss of 0.30 and 0.10 at x = 0.1 and 0.15, respectively. The films prepared by two time deposition had dielectric constants of 450 and 250, and dielectric loss of 0.21 and 0.19 at x = 0.10 and 0.15, respectively.     

Alkoxide Derived SrBi2Ta2O9 Phase Pure Powder and Thin Films

Phase pure powder and thin films of the novel ferroelectric materials SrBi₂Ta₂O₉ (SBT) have been prepared using the organic precursors. The xero-gel formed was dried and characterized using TGA and DTA to determine the organic burn out and crystallization temperature of SBT. Powder X-ray diffraction was used systematically to check the crystallinity of SBT. Phase pure SBT powder was formed as low as 650°C and thin films at 600°C in comparison to other earlier reported work. SEM micrographs show a grain size of ≈0.1 μm and show crack free films with a film thickness of 2 μm.     

Sol–gel synthesis and transport property of nanocrystalline La<Subscript>2</Subscript>Mo<Subscript>2</Subscript>O<Subscript>9</Subscript> thin films

La₂Mo₂O₉ films were successfully synthesized on silicon (100) and poly-alumina substrates via modified sol–gel method with inorganic salts of La(NO₃)₃ and (NH₄)₆Mo₇O₂₄ as precursors. Pure La₂Mo₂O₉ phase was confirmed by XRD if the annealing temperature was higher than 500 °C. Energy dispersive spectrometry (EDS) of TEM revealed that the molar ratio of La to Mo was nearly 1:1. Field-emission SEM characterization showed that the films were dense, crack-free and uniform. The grain size of the films ranged from 30 to 400 nm depending upon the calcination temperature and duration time. The roughness calculated from AFM topography varied in the range between 10 and 35 nm. The thickness of the films was more than 200 nm for single-layered films. The electrical conductivity of the films reaches 0.06 S/cm at 600 °C that was almost more than one order of magnitude higher than that of the corresponding bulk material.     

Preparation of compact Al2O3 film on metal for oxidation resistance by polyvinylpyrrolidone

Oxidation resistance of metal at high temperature can be improved by an environmentally friendly solution deposition approach. Stable precursor solution with high oxide concentration, favorable viscosity and low surface tension was prepared using aluminum sec-butoxide (ASB) and polyvinylpyrrolidone (PVP) as starting raw materials. Alumina sol-gel films were deposited onto metal by spin-coating followed by heat treatment. When PVP was added according to an amount of 50 mg/mL into a sol with an ASB/H₂O molar ratio of 1:35, the as-obtained sol exhibited favorable gelation time and viscosity. The surface tension of the alumina sol with PVP was examined to be lower by 32% than the sol (ASB:H₂O = 1:100) without PVP. TG-DTA analyses show the densification of the alumina gel film with PVP was progressed within a wide temperature range from 200 to 650 °C. Crack-free Al₂O₃ film with a thickness up to 1.5 μm was successfully produced on metallic substrate by three spin-coating cycles. SEM and XRD analyses revealed the gel film transformed into compact α-Al₂O₃ material after calcined at 1,000 °C for 0.5 h. The weight gained by the samples during firing at 1,000 °C indicated that the Al₂O₃ coating film could reduce the rate of oxidation by ∼81%. The hardness of the Al₂O₃ film coated metal was higher by 260% than the uncoated metal that was calcined at 1,000 °C for 0.5 h. It was confirmed by adhesion test that both the alumina/PVP hybrid film and the as-produced α-Al₂O₃ coating film had strong adhesion.     

Fabrication and properties of xBiFeO3-(1 − x)Bi4Ti3O12 system by sol–gel process

The thin films of mixture of xBiFeO₃-(1 − x)Bi₄Ti₃O₁₂ (x = 0.4, 0.5, and 0.6) system were prepared by a sol–gel process. The thicknesses of the thin films were 540, 500, and 570 nm, respectively. The crystal structure of all thin films annealed at 650 °C was analyzed by X-ray diffraction. It was found that the thin films at x = 0.4 and 0.5 mainly consisted of a Bi₄Ti₃O₁₂ phase while Bi₅Ti₃FeO₁₅ was the major phase of the thin film at x = 0.6. The thin film (x = 0.6) showed better ferroelectric properties in remnant polarization and polarization fatigue than those observed in the thin films (x = 0.4 and 0.5). The values of remnant polarization 2P _r and coercive field 2E c of the thin film at x = 0.6 were 36 μC/cm² and 192 kV/cm at an applied electric field of 260 kV/cm, respectively. There was almost no polarization fatigue up to 10¹⁰ switching cycles. Also weak ferromagnetism was observed in the thin film at x = 0.6.     

Synthesis and characterization of sol–gel derived Ag(Nb,Ta)O<Subscript>3</Subscript> nanopowder

Perovskite-type Ag(Nb_0.6Ta_0.4)O₃ nanopowder was prepared by the sol–gel process from the AgNO₃, Ta₂O₅ and Nb₂O₅, with help of K₂CO₃, avoiding use of strong corrosive acid or expensive niobium ethoxide and tantalum ethoxide. The results suggested that thermal decomposition of the xerogel took place when the xerogel was heated at 450 °C. Well-crystallized single-phased powder was obtained at low temperature about 680 °C. With the heat-treatment temperature increasing (680–1,100 °C), the intensity of the diffraction peaks increased. The crystallite size determined by Scherer formula and the result suggested that higher temperature lead to larger crystallite size. Moreover, the average grain size 30–50 nm was estimated by a field emission scanning electron microscope. The influence of holding time on microstructures indicated that the homogeneous and small grains were obtained at 800 °C for 2–4 h while larger ones for 8–16 h.     

Effect of FeO x on the electrocatalytic properties of NiCo2O4 for O2 evolution from alkaline solutions

Mixtures of NiCo₂O₄ and FeO _x were obtained by thermal decomposition of the nitrates of Ni, Co, and Fe in appropriate proportions. Two series of electrodes were prepared: (1) at constant composition (20 mol% FeO _x ) and various calcination temperatures in the range 200 to 480 °C and (2) at constant calcination temperature (300 °C) and various compositions in the whole composition range 0 to 100 mol% FeO _x . The oxide layers were characterized by thermogravimetric analysis, X-ray diffraction, scanning electron microscopy, and cyclic voltammetry. Experimental data showed that the layers consist of a mixture of phases in which Fe oxide is present as Fe₂O₃. The electrocatalytic properties were assessed by means of quasi-stationary potentiostatic current-potential curves for the O₂ evolution reaction from alkaline solution. Results have shown that the mechanism of O₂ evolution depends on composition moderately. The electrocatalytic activity appears to depend on composition only slightly. Dedicated to Professor Oleg Petrii on the occasion of his 70th birthday on August 24th, 2007.     

Ion-pair extraction of transition metal cations from aqueous media using novel N2O2-macrocyclic crown ligands

Three new macrocyclic crown ether ligands containing nitrogen–oxygen donor atoms were designed and synthesized from 1,4-bis(2′-formylphenyl)-1,4-dioxabutane and 4-nitro-o-phenylenediamine. Ion-pair extraction of metal picrates such as Ag⁺, Hg²⁺, Cd²⁺, Zn²⁺, Cu²⁺, Ni²⁺, Mn²⁺, Co²⁺, and Pb²⁺ from aqueous phase to the organic phase was carried out using the novel ligands. The solvent effect over the metal picrate extractions was investigated at 25 ± 0.1 °C by using UV–visible spectrometry. The extractability and the values of the extraction constants (log K_ex) were determined for the extracted complexes.     

An evaluation on thermokinetic parameters for hydrogen peroxide at various concentrations by DSC

Information about the kinetics and thermal decomposition of hydrogen peroxide (H₂O₂) has been required for safety reasons, due to its broad applications in many chemical industries. To determine the inherent hazards during H₂O₂ manufacturing, transportation, disposal, usage, and so on, this study deliberately selected various H₂O₂ concentrations and analyzed them by differential scanning calorimetry (DSC). In addition, thermokinetic parameters were not only established for each of these reactions, but also aimed at comprehensive, kinetic models with various tests conducted at different heating rates. To build up a comprehensive kinetic model, various tests were conducted by heating rates of 1, 2, 4, 10°C min^–1, respectively. According to dynamic DSC tests, the experimental curves show that H₂O₂ decomposition has one exothermic peak and may start to decompose under 47–81°C. The total heat of decomposition is about 192–1079 J g^–1. Not only can these results prevent accidents caused by H₂O₂ during storage and transportation, but also assess its inherent hazards and thereby design procedures for emergency response while runaway reactions occurring.     

A study of YBa2(Cu1?xMex)3O6 + δ (Me = Al, Co, Fe) electrophysical and electrochemical properties

The structure, thermal expansion coefficient, and electroconductivity of YBa₂(Cu_1−x Al _x )₃O_6+δ (x = 0.0–0.9) were studied at 20 to 900°C in air. The most conducting compositions of YBa₂(Cu_1−x Me _x )₃O_6+δ (Me = Al, Co, Fe) were determined. The electrochemical activity of electrodes with the most conducting compositions of YBa₂(Cu_1−x Me _x )₃O_6+δ (Me = Al, Co, Fe) was studied in a wide polarization range in the contact with 0.9ZrO₂ + 0.1Y₂O₃ solid electrolyte in air at the temperatures of 700 to 900°C. Original Russian Text ? V.K. Gil’derman, I.D. Remez, 2009, published in Elektrokhimiya, 2009, Vol. 45, No. 5, pp. 612–615. Published by report at IX Conference “Fundamental Problems of Solid State Ionics”, Chernogolovka, 2008.     

Effect of heat treatment on electrochromic properties of TiO<Subscript>2</Subscript> thin films

Electrochromic titanium oxide (TiO₂) films were deposited on ITO/glass substrates by chemical solution deposition (CSD). The stock solutions were spin-coated onto substrates and then heated at various temperatures (200–500 °C) in various oxygen concentrations (0–80%) for 10 min. The effects of the processing parameters on the electrochromic properties of TiO₂ films were investigated. X-ray diffraction measurements demonstrated that the amorphous TiO₂ films were crystallized to form anatase films above 400 °C. The electrochromic properties and transmittance of TiO₂ films were measured in 1 M LiClO₄–propylene carbonate (PC) non-aqueous electrolyte. An amorphous 350 nm-thick TiO₂ film that was heated at 300°C in 60% ambient oxygen exhibited the maximum transmittance variation (ΔT%), 14.2%, between the bleached state and the colored state, with a ΔOD of 0.087, Q of 10.9 mC/cm², η of 7.98 cm²/C and x in Li _x ClO₄ of 0.076 at a wavelength (λ) of 550 nm.     

Effect of NO, SO2, and O2 on the conversion of nitrous oxide on iron-containing zeolite catalysts

Conditions were found for facilitation of the conversion of nitrous oxide in the presence of Fe-containing zeolite catalysts by oxidants (NO, SO₂, and O₂). The results were interpreted in the framework of a mechanism involving decomposition of N₂O. The effect of NO_x on the reduction of nitrous oxide by C₃-C₄ alkanes was established. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 42, No. 4, pp. 241–245, July–August, 2006.