Synthesis of a novel block copolymer poly(ethylene oxide)‐block‐poly(4‐vinylpyridine) by combination of anionic ring‐opening and controllable free‐radical polymerization

The block copolymer poly(ethylene oxide)‐b‐poly(4‐vinylpyridine) was synthesized by a combination of living anionic ring‐opening polymerization and a controllable radical mechanism. The poly(ethylene oxide) prepolymer with the 2,2,6,6‐tetramethylpiperidinyl‐1‐oxy end group (PEO_T) was first obtained by anionic ring‐opening polymerization of ethylene oxide with sodium 4‐oxy‐2,2,6,6‐tetramethylpiperidinyl‐1‐oxy as the initiator in a homogeneous process. In the polymerization UV and electron spin resonance spectroscopy determined the 2,2,6,6‐tetramethylpiperidinyl‐1‐oxy moiety was left intact. The copolymers were then obtained by radical polymerization of 4‐vinylpyridine in the presence of PEO_T. The polymerization showed a controllable radical mechanism. The desired block copolymers were characterized by gel permeation chromatography, Fourier transform infrared, and NMR spectroscopy in detail. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4404–4409, 2002     

Nitroxide partitioning between styrene and water

Research into nitroxide‐mediated radical polymerization (NMRP) performed in emulsions and miniemulsions has progressed significantly over the past several years. However, our knowledge of the conditions during polymerization (e.g., the nitroxide concentrations in the aqueous and organic phases) is incomplete, and as such we have yet to achieve a clear understanding of the mechanisms involved in these processes. To better understand the conditions present in heterogeneous NMRP, we measured the partition coefficients of 2,2,6,6‐tetramethylpiperidinyl‐1‐oxy (TEMPO), 4‐hydroxy‐TEMPO, and 4‐amino‐TEMPO between styrene and water from 25 to 135 °C. Experiments were performed in a 250‐mL Parr reactor that was equipped for the simultaneous sampling of the aqueous and organic phases. Aqueous‐phase and organic‐phase nitroxide concentrations were measured with ultraviolet–visible spectrophotometry. Experiments were also performed at 135 °C in the presence of hexadecane (costabilizer), polystyrene, and sodium dodecylbenzenesulfonate (surfactant) to determine the effects of the miniemulsion polymerization recipe ingredients on the partitioning of TEMPO and 4‐hydroxy‐TEMPO. On the basis of the measured partition coefficients (expressed as the ratio of the nitroxide concentration in the organic phase to the nitroxide concentration in the aqueous phase), 4‐hydroxy‐TEMPO was the most hydrophilic of the nitroxides investigated, followed by 4‐amino‐TEMPO and TEMPO. Hexadecane, polystyrene, and sodium dodecylbenzenesulfonate did not have a significant influence on the partitioning of these nitroxides at 135 °C. Experiments with ethylbenzene instead of styrene demonstrated that thermally generated radicals were not responsible for the observed temperature effects on the measured partition coefficients. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1081–1089, 2001     

Influence of camphorsulfonic acid in nitroxide‐mediated styrene miniemulsion polymerization

The rate‐accelerating effects of camphorsulfonic acid (CSA) on nitroxide‐mediated styrene miniemulsion polymerization were studied. Polymerizations were initiated with benzoyl peroxide (BPO) as an initiator and mediated with either 2,2,6,6‐tetramethylpiperidinyloxy (TEMPO) or 4‐hydroxy‐2,2,6,6‐tetramethylpiperidinyloxy (OH‐TEMPO). Although CSA has been used to accelerate the rate in bulk nitroxide‐mediated polymerizations, it has not been well studied in emulsion/miniemulsion. With dispersed systems, the effectiveness of CSA is likely to be affected by partitioning between the aqueous and organic phases. In styrene miniemulsion experiments performed over a range of conditions, the effect of adding CSA varied from negligible to significantly increasing the final conversion and molecular weight, depending on the nitroxide:BPO ratio. At a ratio of nitroxide:BPO = 1.7, the effect of CSA addition is small, whereas the final conversion and molecular weight are dramatically enhanced by CSA addition when the nitroxide:BPO ratio is 3.6. CSA is most effective in enhancing the rate and molecular weight when the initial free‐nitroxide concentration is higher. The magnitude of the rate and molecular weight enhancement was similar for TEMPO and OH‐TEMPO despite their differences in water solubility. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2828–2841, 2002     

Preparation of star block copolymers with polystyrene‐block‐poly(ethylene oxide) as side chains on hyperbranched polyglycerol core by combination of ATRP with atom transfer nitroxide radical coupling reaction

The star block copolymers with polystyrene‐block‐poly(ethylene oxide) (PS‐b‐PEO) as side chains and hyperbranched polyglycerol (HPG) as core were synthesized by combination of atom transfer radical polymerization (ATRP) with the “atom transfer nitroxide radical coupling” (“ATNRC”) reaction. The multiarm PS with bromide end groups originated from the HPG core (HPG‐g‐(PS‐Br)_n) was synthesized by ATRP first, and the heterofunctional PEO with α‐2,2,6,6‐tetramethylpiperidinyl‐1‐oxy group and ω‐hydroxyl group (TEMPO‐PEO) was prepared by anionic polymerization separately using 4‐hydroxyl‐2,2,6,6‐tetramethylpiperidinyl‐1‐oxy (HTEMPO) as parents compound. Then ATNRC reaction was conducted between the TEMPO groups in PEO and bromide groups in HPG‐g‐(PS‐Br)_n in the presence of CuBr and pentamethyldiethylenetriamine (PMDETA). The obtained star block copolymers and intermediates were characterized by gel permeation chromatography, nuclear magnetic resonance spectroscopy, fourier transform‐infrared in detail. Those results showed that the efficiency of ATNRC in the preparation of multiarm star polymers was satisfactory (>90%) even if the density of coupling cites on HPG was high. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6754–6761, 2008     

Copolymerization of the macromonomer poly(ethylene oxide) with styryl end group and styrene in the presence of poly(ε‐caprolactone) with 2,2,6,6‐tetramethylpiperidinyl‐1‐oxy end group by controlled radical mechanism

A copolymerization of macromonomer poly(ethylene oxide) (PEO) with a styryl end group (PEO_S) and styrene was successfully carried out in the presence of poly(ε‐caprolactone) (PCL) with 2,2,6,6‐tetramethylpiperidinyl‐1‐oxy end group (PCL_T). The resulting copolymer showed a narrower molecular weight distribution and controlled molecular weight. The effect of the molecular weight and concentration of PCL_T and PEO_S on the copolymerization are discussed. The purity of PEO_S exerted a significant effect on the copolymerization; when the diol contents of PEO macromonomer were greater than 1%, the crosslinking product was found. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2093–2099, 2004     

Synthesis of polyethylene‐grafted multiwalled carbon nanotubes via a peroxide‐initiating radical coupling reaction and by using well‐defined TEMPO and thiol end‐functionalized polyethylenes

Polyethylene (PE), alkoxyamine‐ and thiol‐terminated PEs (PE‐TEMPO and PE‐SH, respectively) can be converted to macroradicals using a peroxide, a thermal cleavage of the alkoxyamine and a hydrogen transfer reaction of the thiol, respectively. The addition of these macroradicals to multiwalled carbon nanotubes (MWCNTs) were compared by performing grafting reactions at 160 °C in 1,3‐dichlorobenzene as solvent. Raman spectroscopy was utilized to follow the introduction of PE on the MWCNTs' surface while thermogravimetric and elemental analysis indicated the extent of this grafting. The grafting ratio was found to be in the range of 19–36 wt %. PE‐functionalized MWCNTs were imaged by transmission electronic microscopy showing a PE layer with various thicknesses covering the surface of nanotubes. It was found that higher levels of grafting were obtained using PE‐2,2,6,6‐tetramethylpiperidinyl‐1‐oxy and PE‐SH rather than a radical grafting reaction in which dicumyl peroxide, PE, and MWCNTs were reacted. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Photoinduced controlled/living free‐radical polymerization of 4‐methacryloyl‐1,2,2,6,6‐pentamethyl‐piperidenyl

The photoinduced solution polymerization of 4‐methacryloyl‐1,2,2,6,6‐pentamethyl‐piperidinyl (MPMP), used as a reactive hindered amine piperidinol derivative, was performed. The obtained MPMP homopolymer had a very narrow molecular weight distribution (1.06–1.39) according to gel permeation chromatography. The number‐average and weight‐average molecular weights increased linearly with the monomer conversion, this being characteristic of controlled/living free‐radical polymerizations. Electron spin resonance signals were detected in the MPMP homopolymer and in a polymer mixture solution, and they were assigned to nitroxide radicals, which were bound to the polymer chains and persisted at a level of 10^?9 mol/L during the polymerization. Instead of the addition of mediated nitroxide radicals such as 2,2,6,6‐tetramethyl‐piperidinyl‐1‐oxy (TEMPO), those radicals (>N? O ·) were formed in situ during the photopolymerization of MPMP, and so the reaction mechanism was understood as being similar to that of TEMPO‐mediated controlled/living free‐radical polymerization. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2659–2665, 2004     

Acrylonitrile‐containing polymers via a combination of metal‐catalyzed living radical and nitroxide‐mediated free‐radical polymerization routes

2‐Phenyl‐2‐[(2,2,6,6‐tetramethylpiperidino)oxy] ethyl 2‐bromopropanoate was successfully used as an initiator in consecutive living radical polymerization routes, such as metal‐catalyzed living radical polymerization and nitroxide‐mediated free‐radical polymerization, to produce various types of acrylonitrile‐containing polymers, such as styrene–acrylonitrile, polystyrene‐b‐styrene–acrylonitrile, polystyrene‐b‐poly(n‐butyl acrylate)‐b‐polyacrylonitrile, and polystyrene‐b‐polyacrylonitrile. The kinetic data were obtained for the metal‐catalyzed living radical polymerization of styrene–acrylonitrile. All the obtained polymers were characterized with ¹H NMR, gel permeation chromatography, and differential scanning calorimetry. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3374–3381, 2006     

Catalyzed chain growth of polyethylene on magnesium for the synthesis of macroalkoxyamines: Application to the production of block copolymers using controlled radical polymerization

A synthetic method for the production of polyethylene (PE) chains carrying alkoxyamine end‐group has been proposed first by successfully reacting the well‐known 2,2,6,6‐tetramethylpiperidine‐N‐oxyl (TEMPO) and N‐(2‐methyl‐2‐propyl)‐N‐(1‐diethylphosphono‐2,2‐dimethylpropyl)‐N‐oxyl (commonly called SG1) stable radicals with dipolyethylenylmagnesium compounds to give PE‐TEMPO and PE‐SG1. Since the homolytic cleavage of these two macroalkoxyamines for the production of block copolymers using controlled radical polymerization would require temperatures higher than 160 °C, two original new nitroxides (4‐[(2,2‐dimethyl‐4‐(N‐tert‐Butyl‐N‐(1‐diethoxyphosphoryl‐2,2‐dimethylpropyl)aminoxy)‐4‐n‐butoxycarbonyl)butanoyloxyl]‐2,2,6,6‐tetramethylpiperidinyl‐1‐oxy, DD1) and 4‐[(2,2‐dimethyl‐4‐(N‐tert‐Butyl‐N‐(1‐diethoxyphosphoryl‐2,2‐dimethylpropyl)aminoxy)‐4‐phenyl) butanoyloxyl]‐2,2,6,6‐tetramethylpiperidinyl‐1‐oxy, DD2) containing a TEMPO moiety and incorporating an SG1‐based alkoxyamine (cleavage temperature: 60 °C) were then synthesized. NMR analyses showed that the resulting PE‐DD1 and PE‐DD2 were obtained using this functionalization strategy though with low to moderate yields (from 17% to 40%). PE‐DD2 (40% functionalization) was used under controlled radical polymerization conditions of n‐butyl acrylate. SEC analyses together with ¹H NMR analysis showed that a poly(ethylene‐b‐n‐butyl acrylate) block copolymer was produced and that the polymerization proceeded under control. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2705–2718, 2007     

Low temperature TEMPO‐mediated styrene polymerization in miniemulsion

The 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO)‐mediated stable free radical polymerization of styrene in miniemulsion at 100 °C is demonstrated. Although this temperature is 20–35 °C lower than typical temperatures used for TEMPO‐mediated polymerizations, reasonable reaction rates were achieved by the addition of ascorbic acid or a free radical initiator. More importantly, the living character of the chains was preserved; the degree of polymer “livingness” was comparable to polymerizations conducted at 135 °C. Polydispersities were broader than that observed in well‐controlled systems, ranging from ～1.4–1.6, and consistent with expectations for systems having a low activation rate. The results are significant for two reasons. They will facilitate TEMPO‐mediated minemulsion polymerizations in nonpressurized (or minimally pressurized) reactors, and they reveal the potential to expand the traditional temperature range of TEMPO and possibly other nitroxides in bulk, solution, and miniemulsion. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 232–242, 2006     

Influence of nitroxide structure on the 2,5‐ and 2,6‐spirodicyclohexyl substituted cyclic nitroxide‐mediated free‐radical polymerization of styrene

The 2,6‐spirodicyclohexyl substituted nitroxide, cyclohexane‐1‐spiro‐2′‐(3′,5′‐dioxo‐4′‐benzylpiperazine‐1′‐oxyl)‐6′‐spiro‐1″‐cyclohexane (BODAZ), was investigated as a mediator for controlled/living free‐radical polymerization of styrene. The values of the number‐average molecular weight increased linearly with conversion, but the polydispersities were higher than for the corresponding 2,2,6,6‐tetramethylpiperidinyl‐1‐oxy (TEMPO) and 2,5‐bis(spirocyclohexyl)‐3‐benzylimidazolidin‐4‐one‐1‐oxyl (NO88Bn) mediated systems at approximately 2.2 and 1.6 at 100 and 120 °C, respectively. These results were reflected in the rate coefficients obtained by electron spin resonance spectroscopy; at 120 °C, the values of the rate coefficients for polystyrene‐BODAZ alkoxyamine dissociation (k_d), combination of BODAZ and propagating radicals (k_c), and the equilibrium constant (K) were 1.60 × 10^?5 s^?1, 5.19 × 10⁶ M^?1 s^?1, and 3.08 × 10^?12 M, respectively. The value of k_d was approximately one and two orders of magnitude lower, and that of K was approximately 20 and 7 times lower than for the NO88Bn and TEMPO adducts. These results are explained in terms of X‐ray crystal structures of BODAZ and NO88Bn; the six‐membered ring of BODAZ deviates significantly from planarity as compared to the planar five‐membered ring of NO88Bn and possesses a benzyl substituent oriented away from the nitroxyl group leading to a seemingly more exposed oxyl group, which resulted in a higher k_c and a lower k_d than NO88Bn. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3892–3900, 2003     

Investigations of thermal polymerization in the stable free‐radical polymerization of 2‐vinylnaphthalene

The feasibility of utilizing stable free‐radical polymerization (SFRP) in the synthesis of well‐defined poly(2‐vinylnaphthalene) homopolymers has been investigated. Efforts to control molecular weight by manipulating initiator concentration while maintaining a 2,2,6,6‐tetramethylpiperidinyl‐1‐oxy (TEMPO):benzoyl peroxide (BPO) molar ratio of 1.2:1 proved unsuccessful. In addition, systematic variations of the TEMPO: BPO molar ratio did not result in narrow molecular weight distributions. In situ Fourier transform infrared spectroscopy (FTIR) indicated that the rate of monomer disappearance under SFRP and thermal conditions were identical. This observation indicated a lack of control in the presence of the stable free radical, TEMPO. The similarities in chemical structure between styrene and 2‐vinylnaphthalene suggested thermally initiated polymerization occurred via the Mayo mechanism. A kinetic analysis of the thermal polymerization of styrene and 2‐vinylnaphthalene suggested that the additional fused ring in 2‐vinylnaphthalene increased the propensity for thermal polymerization. The observed rate constant for thermal polymerization of 2‐vinylnaphthalene was determined using in situ FTIR spectroscopy and was one order of magnitude greater than styrene, assuming pseudo‐first‐order kinetics. Also, an Arrhenius analysis indicated that the activation energy for the thermal polymerization of 2‐vinylnaphthalene was 30 kJ/mol less than styrene. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 583–590, 2002; DOI 10.1002/pola.10131     

Decomposition of model alkoxyamines in simple and polymerizing systems. I. 2,2,6,6‐tetramethylpiperidinyl‐ N‐oxyl‐based compounds

The thermal decomposition of five alkoxyamines labeled TEMPO–R, where TEMPO was 2,2,6,6‐tetramethylpiperidinyl‐N‐oxyl and R was cumyl (Cum), 2‐tert‐butoxy‐carbonyl‐2‐propyl (PEst), phenylethyl (PhEt), 1‐tert‐butoxy‐carbonylethyl (EEst), or 1‐methoxycarbonyl‐3‐methyl‐3‐phenylbutyl (Acrylate‐Cum), was studied with ¹H NMR in the absence and presence of styrene and methyl methacrylate. The major products were alkenes and the hydroxylamine 1‐hydroxy‐2,2,6,6‐tetramethyl‐ piperidine (TEMPOH), and in monomer‐containing solutions, unimeric and polymeric alkoxyamines and alkenes were also found. Furthermore, the reactions between TEMPO and the radicals EEst and PEst were studied with chemically induced dynamic nuclear polarization. In comparison with coupling, TEMPO reacted with the radicals Cum, PEst, PhEt, and EEst and their unimeric styrene adducts by disproportionation to alkenes and TEMPOH only to a minor extent (0.6–3%) but with the radical adducts to methyl methacrylate to a considerable degree (≥20%). Parallel to the radical cleavage, TEMPO–EEst (but not the other alkoxyamines or TEMPO–Acrylate‐Cum) underwent substantial nonradical decay. The consequences for TEMPO‐mediated living radical polymerizations are discussed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3604–3621, 2001     

Nitroxide‐Mediated Radical Polymerization in Miniemulsion at Stationary State: Rationale for Independence of Polymerization Rate on Nitroxide Partitioning Using Oil‐Phase Initiation

Summary: Simulations based on the kinetics and mechanism of nitroxide‐mediated free radical polymerization (NMP) have been carried out in order to understand the hitherto largely unexplained effects (or lack thereof) of nitroxide partitioning in aqueous miniemulsion NMP. The focus has been on the miniemulsion NMP of styrene mediated by TEMPO and 4‐hydroxy‐TEMPO, two nitroxides with very similar activation‐deactivation equilibria, but very different organic phase‐aqueous phase partition coefficients. The general conclusion is that the organic phase propagating radical and nitroxide concentrations are unaffected by the partition coefficient in the stationary state, but the rate of polymerization and the extent of bimolecular termination increase with increasing nitroxide water solubility in the pre‐stationary state region. Specific NMP systems are, therefore, affected differently by nitroxide partitioning depending on whether polymerization predominantly occurs in the stationary state or not, which in turn is governed mainly by the activation‐deactivation equilibrium constant and the rate of thermal initiation.

Simulated organic‐phase propagating radical concentrations in the presence of thermal initiation for TEMPO‐mediated miniemulsion free radical polymerization of styrene for different nitroxide partitioning coefficients at 125 °C.     

Kinetic study of the nitroxide‐mediated controlled free‐radical polymerization of n‐butyl acrylate in aqueous miniemulsions

The controlled free‐radical homopolymerization of n‐butyl acrylate was studied in aqueous miniemulsions at 112 and 125 °C with a low molar mass alkoxyamine unimolecular initiator and an acyclic β‐phosphonylated nitroxide mediator, N‐tert‐butyl‐N‐(1‐diethylphosphono‐2,2‐dimethylpropyl) nitroxide, also called SG1. The polymerizations led to stable latices with 20 wt % solids and were obtained with neither coagulation during synthesis nor destabilization over time. However, in contrast to latices obtained via classical free‐radical polymerization, the average particle size of the final latices was large, with broad particle size distributions. The initial [SG1]₀/[alkoxyamine]₀ molar ratio was shown to control the rate of polymerization. The fraction of SG1 released upon macroradical self‐termination was small with respect to the initial alkoxyamine concentration, indicating a very low fraction of dead chains. Average molar masses were controlled by the initial concentration of alkoxyamine and increased linearly with monomer conversion. The molar mass distribution was narrow, depending on the initial concentration of free nitroxide in the system. The initiator efficiency was lower than 1 at 112 °C but was very significantly improved when either a macroinitiator was used at 112 °C or the polymerization temperature was raised to 125 °C. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4410–4420, 2002     

Preparation of amphiphilic ternary block copolymers with PEO as the middle block and the effect of PEO position on the glass transition temperature (Tg) of copolymers

The copolymer of polystyrene‐block‐poly(ethylene oxide)‐block‐poly (tert‐butyl acrylate) (PS‐b‐PEO‐b‐PtBA) was prepared, the synthesis process involved ring‐opening polymerization (ROP), nitroxide‐mediated polymerization (NMP), and atom transfer radical polymerization (ATRP), and 4‐hydroxyl‐2,2,6,6‐tetramethylpiperidinyl‐1‐oxy (HTEMPO) was used as parent compound. The PEO precursors with α‐hydroxyl‐ω‐2,2,6,6‐tetramethylpiperidinyl‐1‐oxy end groups(TEMPO‐PEO‐OH) were first obtained by ROP of EO using HTEMPO and diphenylmethylpotassium (DPMK) as the coinitiator. The TEMPO at one end of PEO chain mediated the polymerization of St using benzoyl peroxide as initiator. The resultant PS‐b‐PEO‐OH reacted further with 2‐bromoisobutyryl bromide and then initiated the polymerization of tBA in the presence of CuBr and PMDETA by ATRP. The ternary block copolymers PS‐b‐PEO‐b‐PtBA and intermediates were characterized by gel permeation chromatography, Fourier transform infrared, and nuclear magnetic resonance spectroscopy in detail. Differential scanning calorimetry measurements confirmed that the PS‐b‐PEO‐b‐PtBA with PEO as middle block can weaken the interaction between PS and PtBA blocks, the glass transition temperature (T_g) for two blocks were approximate to their corresponding homopolymers comparing with the PEO‐b‐PS‐b‐PtBA with PEO as the first block. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2624–2631, 2008     

Heteroarm H‐shaped terpolymers through the combination of the Diels–Alder reaction and controlled/living radical polymerization techniques

Heteroarm H‐shaped terpolymers (PS)(PtBA)–PEO–(PtBA)(PS) and (PS)(PtBA)–PPO–(PtBA)(PS) [where PS is polystyrene, PtBA is poly(tert‐butyl acrylate), PEO is poly(ethylene oxide), and PPO is poly(propylene oxide)], containing PEO or PPO as a backbone and PS and PtBA as side arms, were prepared via the combination of the Diels–Alder reaction and atom transfer radical and nitroxide‐mediated radical polymerization routes. Commercially available PEO or PPO containing bismaleimide end groups was reacted with a compound having an anthracene functionality, succinic acid anthracen‐9‐yl methyl ester 3‐(2‐bromo‐2‐methylpropionyloxy)‐2‐methyl‐2‐[2‐phenyl‐2‐(2,2,6,6‐tetramethylpiperidin‐1‐yloxy)ethoxycarbonyl]propyl ester, with a Diels–Alder reaction strategy. The obtained macroinitiator with tertiary bromide and 2,2,6,6‐tetramethylpiperidin‐1‐oxy functional end groups was used subsequently in the atom transfer radical polymerization of tert‐butyl acrylate and in the nitroxide‐mediated free‐radical polymerization of styrene to produce heteroarm H‐shaped terpolymers with moderately low molecular weight distributions (<1.31). The polymers were characterized with ¹H NMR, ultraviolet, gel permeation chromatography, and differential scanning calorimetry. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3947–3957, 2006     

Behavior of 3‐vinylpyridine in nitroxide‐mediated radical polymerization: The influence of nitroxide concentration,solvent, and temperature

The influence of nitroxide concentration, solvent, and temperature on the nitroxide‐mediated radical polymerization of 3‐vinylpyridine (3VP) was examined. Long‐chain poly(3‐vinylpyridine)s with low polydispersities were synthesized. The initial 2,2,6,6‐tetramethylpiperidin‐1‐oxyl concentration had no influence on the kinetics of the polymerization but was responsible for the obtained molar weights. Compared with the polymerization of styrene, the polymerization of 3VP proved quite fast. The influence of temperature on the reaction rate was also demonstrated, and the polymerization could be controlled even at 110 °C. Some polymerizations were also performed in solution to test the influence of a solvent such as ethylene–glycol, whose effect on the polymerization of 3VP was dependent on temperature. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3067–3073, 2000     

End‐group fidelity in nitroxide‐mediated living free‐radical polymerizations

In this study, new nitroxides based on the 2,2,5‐trimethyl‐4‐phenyl‐3‐azahexane‐3‐oxy skeleton were used to examine chain‐end control during the preparation of polystyrene and poly(t‐butyl acrylate) under living free‐radical conditions. Alkoxyamine‐based initiators with a chromophore attached to either the initiating fragment or the mediating nitroxide fragment were prepared, and the extent of the incorporation of the chromophores at either the initiating end or the propagating chain end was determined. In contrast to 2,2,6,6‐tetramethyl piperidinoxy (TEMPO), the incorporation of the initiating and terminating fragment into the polymer chain was extremely high. For both poly(t‐butyl acrylate) and polystyrene with molecular weights less than or equal to 70,000, incorporations at the initiating end of greater than 97% were observed. At the terminating chain end, incorporations of greater than 95% were obtained for molecular weights less than or equal to 50,000. The level of incorporation tended to decrease slightly at higher molecular weights because of the loss of the alkoxyamine propagating unit, which had important consequences for block copolymer formation. These results clearly show that these new α‐H nitroxides could control the polymerization of vinyl monomers such as styrene and t‐butyl acrylate to an extremely high degree, comparable to anionic and atom transfer radical polymerization procedures. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4749–4763, 2000     

Deactivation reactions in the modeled 2,2,6,6‐tetramethyl‐1‐piperidinyloxy‐mediated free‐radical polymerization of styrene: A comparative study with the 2,2,6,6‐tetramethyl‐1‐piperidinyloxy/acrylonitrile system

The competitiveness of the combination and disproportionation reactions between a 1‐phenylpropyl radical, standing for a growing polystyryl macroradical, and a 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO) radical in the nitroxide‐mediated free‐radical polymerization of styrene was quantitatively evaluated by the study of the transition geometry and the potential energy profiles for the competing reactions with the use of quantum‐mechanical calculations at the density functional theory (DFT) UB3‐LYP/6‐311+G(3df, 2p)//(unrestricted) Austin Model 1 level of theory. The search for transition geometries resulted in six and two transition structures for the radical combination and disproportionation reactions, respectively. The former transition structures, mainly differing in the out‐of‐plane angle of the N? O bond in the transition structure TEMPO molecule, were correlated with the activation energy, which was determined to be in the range of 8.4–19.4 kcal mol^?1 from a single‐point calculation at the DFT UB3‐LYP/6‐311+G(3df, 2p)//unrestricted Austin Model 1 level. The calculated activation energy for the disproportionation reaction was less favorable by a value of more than 30 kcal mol^?1 in comparison with that for the combination reaction. The approximate barrier difference for the TEMPO addition and disproportionation reaction was slightly smaller for the styrene polymerization system than for the acrylonitrile polymerization system, thus indicating that a β‐proton abstraction through a TEMPO radical from the polymer backbone could diminish control over the radical polymerization of styrene with the nitroxide even more than in the latter system. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 232–241, 2007