Synthesis and helical properties of N‐substituted p‐benzamide random copolymers possessing chiral/achiral and (S)/(R) side chains

Random copolymers of poly(p‐benzamide)s having a methyl‐substituted tri(ethylene glycol) unit as a chiral side chain and a nonsubstituted tri(ethylene glycol) or branching alkyl unit as an achiral side chain were synthesized by copolymerization of N‐substituted 4‐aminobenzoic acid ester monomers with a base in the presence of an initiator. Copolymerizations of the chiral (S)‐monomer with N‐tri(ethylene glycol) achiral monomer and with the racemic monomer were carried out by the addition of a mixture of two monomers and an initiator to a solution of a base all at once, affording the corresponding random copolymers. On the other hand, random copolymerization of the chiral monomer with monomer having an achiral branching alkyl side chain required dropwise addition of the achiral monomer to a mixture of the chiral monomer, the initiator, and the base. These copolymers formed helical structures, but analysis of the CD spectra indicated the absence of cooperativity between the monomer units along the copolymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of a novel mid‐chain macrophotoinitiator of polyacrylonitrile by Ce(IV)/HNO3 redox system

The polymerization of acrylonitrile initiated by cerium(IV) ammonium nitrate in combination with dihydroxy functional photoinitiator namely, 2‐hydroxy‐1‐[4‐(2‐hydroxyethoxy)phenyl]‐2‐methyl propan‐1‐one (HE‐HMPP), Irgacure 2959, has been investigated in aqueous nitric acid. A novel mid‐chain macrophotoinitiator of polyacrylonitrile (PAN) was obtained. The effects of acrylamide (AAm), HE‐HMPP, Ce(IV), and HNO₃ concentrations and temperature on the polymerization rate, monomer conversion, and intrinsic viscosities were investigated. The photodegradation and IR, H NMR, UV, and fluorescence spectroscopic studies revealed that PAN with desired photoinitiator functionality in the middle of the chain was obtained. The obtained PAN was used as prepolymer for photoinduced free radical polymerization of methyl methacrylate (MMA) and AAm to produce block copolymers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5404–5413, 2008     

Ring‐opening polymerization of 1,4‐dioxan‐2‐one initiated by lanthanum isopropoxide in bulk

Lanthanum isopropoxide (La(OiPr)₃) has been synthesized and employed for ring‐opening polymerization of 1,4‐dioxan‐2‐one in bulk as a single‐component initiator. The influences of reaction conditions such as initiator concentration, reaction time, and reaction temperature on the polymerization were investigated. The kinetics indicated that the polymerization is first‐order with respect to the monomer concentration. The Mechanistic investigations according to ¹H NMR spectrum analysis demonstrated that the polymerization of PDO proceeded through a coordination‐insertion mechanism with a rupture of the acyl‐oxygen bond of the monomer rather than the alkyl‐oxygen bond cleavage. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5214–5222, 2008     

Free‐Standing,Single‐Bilayer‐Thick Polymeric Nanosheets via Spatially Confined Polymerization

Polymeric nanosheets organized by molecular building blocks bearing specifically oriented reactive groups provide abundant and versatile strategies for tailoring structure and chemical functionality periodically over extended length scales that complement graphene. Here we report the bulk synthesis of free‐standing polymeric nanosheets via spatially confined polymerization from an elaborate 2D supramolecular system composed of two liquid‐crystalline lamellar bilayer membranes of a self‐assembled nonionic surfactant—dodecylglyceryl itaconate (DGI)—sandwiched by a water layer. By employing a covalent polymerization on the lamellar bilayer membranes, single‐bilayer‐thick (4.2 nm), and large area (greater than 100 μm²) polymeric nanosheets of bilayer membranes are achieved. The polymeric nanosheets could serve as a well‐defined 2D platform for post‐functionalization for producing advanced hybrid materials by introducing the reactions on the hydroxyl groups at the head of DGI on the outer surfaces.

     

Highly efficient alginate-based macromolecular photoinitiator for crosslinking and toughening gelatin hydrogels

Constructing gelatin hydrogels through photopolymerization is getting increasingly attractive due to their excellent biocompatibility and unparalleled flexibility in fabricating complex structures. In this study, an alginate-based macromolecular photoinitiator (Alg-2959) is synthesized by grafting Irgacure2959, a widely used hydrophilic small molecular photoinitiator, onto the framework of alginate. The characterization of Alg-2959 is carried out by ¹H nuclear magnetic resonance (¹HNMR), Fourier infrared spectroscopic (FTIR), Thermogravimetric analysis (TGA), and UV–Vis absorption spectrum. It is shown that Alg-2959 can induce the polymerization of acrylate monomer poly(ethylene glycol) diacrylate (PEGDA400) and glycidyl methacrylate modified gelatin (Gel-GM) with similar initiation efficiency as Irgacure2959. Compared with the pure hydrogels prepared using Irgacure2959, the hybrid hydrogels containing Alg-2959 can be further crosslinked by Ca²⁺ to form the double-network hydrogels, which exhibit enhanced toughness and elasticity. In addition, due to the introduction of alginate, the migration stability of Alg-2959 in the hydrogel networks is significantly improved compared with Irgacure2959. These results indicate the great potential of Alg-2959 in preparing biocompatible and resilient photopolymers.     

Synthesis of polymers by template polymerization. I. Template polymerization of poly(methacrylic acid) with β‐cyclodextrin

A novel template monomer with multiple methacryloyl groups was synthesized with β‐cyclodextrin by the acetylation of primary hydroxyl groups and the esterification of secondary hydroxyl groups with methacrylic acid anhydride. The average number of methacryloyl groups in the monomer was 11. The radical polymerization of the monomer was carried out with the following initiators: α,α′‐azobisisobutylonitrile, H₂O₂? Fe²⁺ redox initiator, p‐xylyl‐N,N‐dimethyldithiocarbamate (XDC), and α‐bromo‐p‐xylyl‐N,N‐dimethyldithiocarbamate (BXDC). When the concentration of the monomer was less than 4.12 × 10^?3 M, polymerization was limited inside the molecule, and gelation of the system was hindered. For controlled radical photopolymerization with XDC and BXDC, the methacryloyl groups of the monomer were homogeneously polymerized, and poly(methacrylic acid) with a narrow molecular weight distribution was obtained by the hydrolysis of the polymerized products. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3539–3546, 2001     

Polyacrylamide cryogels by photoinitiated free radical polymerization

A novel method for the preparation of poly(acrylamide) cryogels by photoinitiated polymerization of monomeric precursors was described. A series of poly(acrylamide) cryogels were easily prepared by irradiating aqueous solutions containing acrylamide and N,N′‐methylene(bis)acrylamide as monomer and cross‐linker, respectively, in the presence of 1‐[4‐(2‐hydroxyethoxy)phenyl]‐2‐hydroxy‐2‐methyl‐1‐propane‐1‐one (Irgacure 2959) as water‐soluble photoinitiator with the help of freezing–thawing procedures. Photolysis was conducted at ?13 °C isothermally through specially designed cryostat‐integrated Rayonet merry‐go‐round photoreactor. On comparing the described photochemical method with the conventional redox counter part, the polymerization is initiated, and gelation proceeds only on external stimulation by light. This way, concomitant hydrogel formation usually observed with the redox process as a result of premature polymerization during the cooling process was prevented. The obtained cryogels exhibited superfast swelling behavior. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

UV‐Irradiation Cured Organic‐inorganic Hybrid Nanocomposite Initiated by Ethoxysilane‐modified Multifunctional Polymeric Photoinitiator through Sol‐gel Process

The UV‐cured organic‐inorganic hybrid nanocomposite (nano‐Si‐m‐PI) was prepared through the photopolymerization of acrylic resin initiated by ethoxysilane‐modified multifunctional oligomeric photoinitiator (Si‐m‐PI). The esterification reaction of 2‐hydroxy‐4′‐(2‐hydroxyethoxy)‐2‐methylpropiophenone (Irgacure 2959) with thioglycolic acid, and the following addition reactions with dipentaerythritol hexaacrylate and then 3‐aminopropyltriethoxysilane were carried out for preparing the Si‐m‐PI. The Si‐m‐PI exhibits the similar UV absorption and molar extinction coefficient with Irgacure 2959. The photoinitiating activity study by photo‐DSC analysis showed that the Si‐m‐PI possesses high photopolymerization rate at the peak maximum (R_p^max) and final unsaturation conversion (P^f) in the cured hybrid films. From the scanning electron microscope (SEM) observation, the SiO₂ nanoparticles dispersed uniformly in the formed nano‐Si‐m‐PI, whereas the aggregation of nanoparticals occurred in nano‐Irg, which was prepared through the photopolymerization of acrylic resin initiated by Irgacure 2959. Moreover, compared with the UV‐cured pure polymer and nano‐Irg, the nano‐Si‐m‐PI showed remarkably enhanced thermal stability and mechanical properties.     

Synthesis of chiral iridium complexes immobilized on amphiphilic polymers and their application to asymmetric catalysis

This article details the enantioselective catalytic performance of crosslinked, polymer immobilized, Ir‐based, chiral complexes for transfer hydrogenation of cyclic imines to chiral amines. Polymerization of the achiral vinyl monomer, divinylbenzene, and a polymerizable chiral 1,2‐diamine monosulfonamide ligand followed by complexation with [IrCl₂Cp*]₂ affords the crosslinked polymeric chiral complex, which can be successfully applied to asymmetric transfer hydrogenation of cyclic imines. Polymeric catalysts prepared from amphiphilic achiral monomers have high catalytic activity in the reaction and can be used both in organic solvents and water to give chiral cyclic amines with a high level of enantioselectivity (up to 98% ee). The asymmetric reaction allows for reuse of the heterogeneous catalyst without any loss in activity or enantioselectivity over several runs. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3037–3044     

The low‐temperature study of d‐ and dl‐camphoric anhydride

The low‐temperature crystal stuctures of d ‐ and dl ‐camphoric anhydride, C₁₀H₁₄O₃, have been determined by X‐ray diffraction methods. Although the two enantiomers crystallize in different space groups, the cell volumes and densities are essentially the same. The six‐membered rings deviate significantly from planarity, both exhibiting half‐boat conformations. The dihedral angle between the six‐ and five‐membered rings is 80.3 (1)° in both cases. The main difference in the molecular stuctures can be described by two torsion angles associated with the H atoms of the methyl substituents. The packing of the racemic and chiral structures are essentially the same.     

Investigation of Structural Relationships between Racemic Alkali and Ammonium Hydrogen Tartrates and their Chiral Counterparts

Single crystals of racemic anhydrous alkali and ammonium hydrogen tartrates of the composition M(C₄H₅O₆) with M = K, Rb, Cs, NH₄ as well as M_xM′_1?x(C₄H₅O₆) with {M = K, M′ = Rb, x = 0.5}, {M = K, M′ = NH₄, x = 0.56} and {M = Rb, M′ = NH₄, x = 0.61} were obtained from the reaction of D,L‐tartaric acid with the corresponding hydroxides MOH and / or M′OH. These compounds form an isostructural series (monoclinic, P2₁/c, Z = 4). The structures consist of alternating tartrate anion layers and cation layers. Each tartrate layer is held together by a number of hydrogen bonds and contains exclusively either the D or the L‐form of the tartrate. Structural analogies between these crystals and their chiral counterparts are investigated. The smilarity of cell parameters between racemic and chiral structures is shown to be a consequence of certain packing features that occur in both groups.     

Effect of ionic surfactants on the iridescent color in lamellar liquid crystalline phase of a nonionic surfactant

A nonionic surfactant, n-dodecyl glyceryl itaconate (DGI), self-assembles into bilayer membranes in water having a spacing distance of sub-micrometer in the presence of small amounts of ionic surfactants, and shows beautiful iridescent color. Ionic surfactants have strong effects on this iridescent system. We have interestingly found that the iridescent color changes with time after mixing DGI and ionic surfactants and the color in equilibrium state changes greatly with concentration of the ionic surfactants. The time-dependent color change results from the transformation of DGI aggregate structure after being mixed with ionic surfactant. It is first found that the iridescent color of this nonionic system can be changed from red to deep blue by altering the concentration of ionic surfactants added even though the total concentration of surfactant is almost constant. Such large blue shift of the iridescent color in equilibrium state cannot be fully explained by the ordinary undulation theory applied so far for this phenomenon. The flat lamellar sheets tend to curve by increasing the concentration of ionic surfactants to form separated onion-like and/or myelin-like structures. These separated structures of lamellar system result in the decrease of spacing distance between bilayer membranes because some vacant spaces necessarily appear among these structures.     

Synthesis and characterization of L‐leucine containing chiral vinyl monomer and its polymer,poly(2‐(methacryloyloxyamino)‐4‐methyl pentanoic acid)

A chiral monomer containing L ‐leucine as a pendant group was synthesized from methacryloyl chloride and L ‐leucine in presence of sodium hydroxide at 4 °C. The monomer was polymerized by free radical polymerization in propan‐2‐ol at 60 °C using 2,2′‐azobis isobutyronitrile (AIBN) as an initiator under nitrogen atmosphere. The polymer, poly(2‐(Methacryloyloxyamino)‐4‐methyl pentanoic acid) is thus obtained. The molecular weight of the polymer was determined to be: M_w is 6.9 × 10³ and M_n is 5.6 × 10³. The optical rotation of both chiral monomer and its polymer varies with the solvent polarity. The amplification of optical rotation due to transformation of monomer to polymer is associated with the ordered conformation of chiral monomer unit in the polymeric chain due to some secondary interactions like H‐bonding. The synthesized monomer and polymer exhibit intense Cotton effect at 220 nm. The conformation of the chain segments is sensitive to external stimuli, particularly the pH of the medium. In alkaline medium, the ordered chain conformation is destroyed resulting disordered random coils. The ordered coiling conformation is more firmly present on addition of HCl. The polymer exhibits swelling‐deswelling characteristics with the change of pH of the medium, which is reversible. The Cotton effect decreases linearly with the increase of temperature which is reversible on cooling. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2228–2242, 2009     

Two modes of asymmetric polymerization of phenylacetylenes having an L‐amino alcohol residue and two hydroxy groups

Four novel chiral phenylacetylenes having an L ‐amino alcohol residue and two hydroxymethyl groups were synthesized and polymerized by an achiral catalyst ((nbd)Rh⁺[η⁶‐(C₆H₅)B^?(C₆H₅)₃]) or a chiral catalytic system ([Rh(nbd)Cl]₂/(S)‐ or (R)‐phenylethylamine ((S)‐ or (R)‐PEA)). The two resulting polymers having an L ‐valinol or L ‐phenylalaninol residue showed Cotton effects at wavelengths around 430 nm. This observation indicated that they had an excess of one‐handed helical backbones. Positive and negative Cotton effects were observed only for the polymers having an L ‐valinol residue produced by using (R)‐ and (S)‐PEA as a cocatalyst, respectively, although the monomer had the same chirality. Even when the achiral catalyst was used, the two resulting polymers having an L ‐valinol or L ‐phenylalaninol residue showed Cotton effects despite the long distance between the chiral groups and the main chain. We have found the first example of a new type of chiral monomer, that is, a chiral phenylacetylene monomer having an L ‐amino alcohol residue and two hydroxy groups that was suitable for both modes of asymmetric polymerization, that is, the helix‐sense‐selective polymerization ( HSSP ) with the chiral catalytic system and the asymmetric‐induced polymerization ( AIP ) with the achiral catalyst. The other two monomers having L ‐alaninol and L ‐tyrosinol were found to be unsuitable to neither HSSP nor AIP because of their polymers' low solubility. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Controlled radical polymerization of 2‐hydroxyethyl methacrylate with a hydrophilic ruthenium complex and the synthesis of amphiphilic random and block copolymers with methyl methacrylate

A hydrophilic ruthenium complex with ionic phosphine ligands { 1 : RuCl₂[P(3‐C₆H₄SO₃Na)(C₆H₅)₂]₂} induced controlled radical polymerization of 2‐hydroxyethyl methacrylate (HEMA) in methanol under homogeneous conditions; the initiator was a chloride (R‐Cl) such as CHCl₂COPh. The number‐average molecular weights of poly(HEMA) increased in direct proportion to monomer conversion, and the molecular weight distributions were relatively narrow (M_w/M_n = 1.4–1.7). A similar living radical polymerization was possible with (MMA)₂‐Cl [(CH₃)₂C(CO₂CH₃)CH₂C(CH₃)(CO₂CH₃)Cl] as an initiator coupled with amine additives such as n‐Bu₃N. In a similar homogeneous system in methanol, methyl methacrylate (MMA) could also be polymerized in living fashion with the R‐Cl/ 1 initiating system. Especially for such hydrophobic polymers, the water‐soluble ruthenium catalyst was readily removed from the polymers by simple washing with an aqueous dilute acid. This system can be applied to the direct synthesis of amphiphilic random and block copolymers of HEMA and MMA. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2055–2065, 2002     

Synthesis of homopolymers and multiblock copolymers by the living ring‐opening metathesis polymerization of norbornenes containing acetyl‐protected carbohydrates with well‐defined ruthenium and molybdenum initiators

The ring‐opening metathesis polymerization (ROMP) of norbornenes containing acetyl‐protected glucose [2,3,4,6‐tetra‐O‐acetyl‐glucos‐1‐O‐yl 5‐norbornene‐2‐carboxylate ( 1 )] and maltose [2,3,6,2′,3′,4′,6′‐hepta‐O‐acetyl‐maltos‐1‐O‐yl 5‐norbornene‐2‐carboxylate ( 2 )] was explored in the presence of Mo(N‐2,6‐ⁱPr₂C₆H₃)(CHCMe₂Ph)(O^tBu)₂ ( A ), Ru(CHPh)(Cl)₂(PCy₃)₂ ( B ; Cy = cyclohexyl), and Ru(CHPh)(Cl)₂(IMesH₂)(PCy₃) ( C ; IMesH₂ = 1,3‐dimesityl‐4,5‐dihydromidazol‐2‐ylidene). The polymerizations promoted by B and A proceeded in a living fashion with exclusive initiation efficiency, and the resultant polymers possessed number‐average molecular weights that were very close to those calculated on the basis of the monomer/initiator molar ratios and narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight < 1.18) in all cases. The observed catalytic activity of B was strongly dependent on both the initial monomer concentration and the solvent employed, whereas the polymerization initiated with A was completed efficiently even at low initial monomer concentrations. The polymerization with C also took place efficiently, and even the polymerization with 1000 equiv of 1 was completed within 2 h. First‐order relationships between the propagation rates and the monomer concentrations were observed for all the polymerization runs, and the estimated rate constants at 25 °C increased in the following order: A > C > B . On the basis of these results, we concluded that ROMP with A was more suitable than ROMP with B or C for the efficient and precise preparation of polymers containing carbohydrates. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4248–4265, 2004     

(P,M)‐1,2,3,9,10,11‐Hexa­methoxy‐5,7‐di­hydro­dibenz­[c,e]­oxepine and (P,M)‐1,11‐di­methyl‐5,5,7,7‐tetra­phenyl‐5,7‐di­hydro­dibenz­[c,e]­oxepine

The title compounds, C₂₀H₂₄O₇ and C₄₀H₃₂O, respectively, are racemic oxepines, the mol­ecules of which contain a chiral axis. Both mol­ecules possess crystallographic C₂ symmetry and the seven‐membered ring adopts a twisted‐boat confor­mation.     

Rapid ring‐opening polymerization of 1,4‐dioxan‐2‐one initiated by titanium alkoxides

Ring‐opening polymerization of 1,4‐dioxan‐2‐one in bulk was initiated by three titanium alkoxides, titanium dichlorodiisopropoxide (TiCl₂(OiPr)₂), titanium chlorotriisopropoxide (TiCl(OiPr)₃), and titanium tetraisopropoxide (Ti(OiPr)₄). The results indicate that the polymerization rate increased with number of OiPr groups in the initiator. High conversion of monomer (90%) and high molecular weight (11.9 × 10⁴ g/mol) of resulting polymer can be achieved in only 5 min at 60 °C with Ti(OiPr)₄ as an initiator. Analysis on nuclear magnetic resonance (NMR) spectra suggests the initiating sites for TiCl₂(OiPr)₂, TiCl(OiPr)₃, and Ti(OiPr)₄ to be 1.9, 2.6, and 3.8, respectively. Coordination‐insertion mechanism for the polymerization via cleavage of the acyl–oxygen bonds of the monomer was proved by NMR investigation. Kinetic studies indicate that polymerization initiated by Ti(OiPr)₄ followed a first‐order kinetics, with an apparent activation energy of 33.7 kJ/mol. It is noteworthy that this value is significantly lower than earlier reported values with other catalysts, namely La(OiPr)₃ (50.5 kJ/mol) and Sn(Oct)₂ (71.8 kJ/mol), which makes it an attractive catalyst for reactive extrusion polymerization. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis of poly(2‐vinyl pyridine)‐b‐poly(n‐hexyl isocyanate) amphiphilic coil‐rod block copolymer by anionic polymerization

A well‐defined amphiphilic coil‐rod block copolymer, poly(2‐vinyl pyridine)‐b‐poly(n‐hexyl isocyanate) (P2VP‐b‐PHIC), was synthesized with quantitative yields by anionic polymerization. A low reactive one‐directional initiator, potassium diphenyl methane (DPM‐K), was very effective in polymerizing 2‐vinyl pyridine (2VP) without side reactions, leading to perfect control over molecular weight and molecular weight distribution over a broad range of initiator and monomer concentration. Copolymerization of 2VP with n‐hexyl isocyanate (HIC) was carried out in the presence of sodium tetraphenyl borate (NaBPh₄) to prevent backbiting reactions during isocyanate polymerization. Terminating the living end with a suitable end‐capping agent resulted in a P2VP‐b‐PHIC coil‐rod block copolymer with controlled molecular weight and narrow molecular weight distribution. Cast film from a chloroform solution of P2VP‐b‐PHIC displayed microphase separation, characteristic of coil‐rod block copolymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 607–615, 2005     

Alternating copolymer based on sulfonamide‐substituted phenylmaleimide and vinyl monomers as polymer electrolyte membrane

The alternating copolymerization of phenylmaleimide (PMI) with a pendant sulfonamide acid group (sa‐PMI) and n‐butyl vinyl ether (BVE) as the aliphatic vinyl monomer afforded proton‐conducting polymer electrolytes—sa‐PMI‐BVEs—and their properties were compared with those of sa‐PMI‐STs that were synthesized from sa‐PMI and styrene. The ion exchange capacities (IECs) can be easily controlled by partly replacing sa‐PMI with unsubstituted PMI. sa‐PMI‐BVE is more flexible than sa‐PMI‐ST, and therefore, forms thin membranes even at high IECs, while sa‐PMI‐ST membranes are rigid and brittle. However, sa‐PMI‐BVE exhibits rather low thermal and oxidative stability. To realize polymer electrolyte membranes with reliable mechanical strength and a high IEC, gel‐filled membranes were prepared by polymerization in the presence of a small amount of a crosslinker, divinylbenzene, in porous polytetrafluoroethylene membranes. By using the gel‐filled membrane, H₂/O₂ fuel cells could be operated at 80 °C with reasonable performance. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013