Phenothiazine‐S,S‐dioxide‐ and fluorene‐based light‐emitting polymers: Introduction of e−‐deficient S,S‐dioxide into e−‐rich phenothiazine

A novel series of poly(10‐hexyl‐phenothiazine‐S,S‐dioxide‐3,7‐diyl) and poly(9,9′‐dioctyl‐fluorene‐2,7‐diyl‐alt‐10‐hexyl‐3,7‐phenothiazine‐S,S‐dioxide) (PFPTZ‐SS) compounds were synthesized through Ni(0)‐mediated Yamamoto polymerization and Pd(II)‐catalyzed Suzuki polymerization. The synthesized polymers were characterized by ¹H NMR spectroscopy and elemental analysis and showed higher glass transition temperatures than that of pristine polyfluorene. In terms of photoluminescence (PL), the PFPTZ‐SS compounds were highly fluorescent with bright blue emissions in the solid state. Light‐emitting devices were fabricated with these polymers in an indium tin oxide/poly(3,4‐ethylene dioxythiophene):poly(styrene sulfonate)/polymer/Ca/Al configuration. The electroluminescence (EL) of the copolymers differed from the PL characteristics: the EL device exhibited a redshifted greenish‐blue emission in contrast to the blue emission observed in the PL. Additionally, this unique phenothiazine‐S,S‐dioxide property, triggered by the introduction of an electron‐deficient SO₂ unit into the electron‐rich phenothiazine, gave rise to improvements in the brightness, maximum luminescence intensity, and quantum efficiency of the EL devices fabricated with PFPTZ‐SS. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1236–1246, 2007     

Photoluminescent,liquid‐crystalline,and electrochemical properties of para‐phenylene‐based alternating conjugated copolymers

Novel liquid‐crystalline alternating conjugated copolymers [ P(P(6)CN‐alt‐Cz) and P(P(6)CN‐alt‐MeP) ] with phenylene and carbazolylene or phenylene with methyl substitution onto the main chain have been synthesized through palladium‐catalyzed Suzuki coupling reactions. The influence of the incorporation of carbazolylene and the substituted phenylene into the main chain on the thermal, mesomorphic, and luminescent properties has been investigated by Fourier transform infrared spectroscopy, thermogravimetry, differential scanning calorimetry, polarized optical microscopy, ultraviolet–visible spectroscopy, photoluminescence (PL), and cyclic voltammetry. These polymers show highly thermal stability, losing little of their weights when heated to 360 °C. The conjugated copolymers exhibit liquid crystallinity at elevated temperature. The existence of the chromophoric terphenyl core endows the copolymers with high PL and the polymer P(P(6)CN‐alt‐Cz containing carbazolylene unit can emit more pure blue light. All the copolymer films with low band gaps about 2.3–2.4 eV undergo reversible oxidation and reduction processes, significantly lower than the band gap of poly(p‐phenylene). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 434–442, 2010     

Fluorene copolymers containing bithiophene/2,5‐ or 2,6‐pyridine units: A study of their optical,electrochemical, and electroluminescence properties

Two alternating copolymers, poly[(2,5‐di(2‐thienyl)‐pyridine‐5,5′‐diyl)‐alt‐(9,9‐dioctylfluorene‐2,7‐diyl)], PFO‐TPy25T, and poly[(2,6‐di(2‐thienyl)‐pyridine‐5,5′‐diyl)‐alt‐(9,9‐dioctylfluorene‐2,7‐diyl)], PFO‐TPy26T, were synthesized by the Pd‐catalyzed Suzuki polymerization method. The pyridine units are present as trimeric monomers in these copolymers and have different connectivities to their two neighboring thiophenes, para‐ and meta‐linkages. We investigated the variations in the optical and electrochemical properties of the copolymers that arise from these different connectivities. The two polymers exhibit 5% weight loss above 410 °C and high glass transition temperatures (T_g: 113 °C for PFO‐TPy25T, 142 °C for PFO‐TPy26T). The UV–vis absorption maximum peaks of PFO‐TPy25T and PFO‐TPy26T in the solid state were found to be 449 and 398 nm respectively, with photoluminescence maximum peaks in the solid state of 573 and 490 nm respectively. Using cyclic voltammetry, we determined their energy band gaps: 3.08 eV for PFO‐TPy25T and 3.49 eV for PFO‐TPy25T. The cyclic voltammetry study of these polymers revealed that there are some differences. The electroluminescence (EL) properties of the copolymers were measured for the device configuration of ITO/PEDOT/polymers/Ca/Al. The device fabricated with the polymer containing 2,5‐pyridine exhibits pale orange emission, whereas the device fabricated with the polymer containing 2,6‐pyridine exhibits pale blue emission. The EL device fabricated with PFO‐TPy25T has a higher brightness (2010 cd/m²) and external quantum efficiency (0.1%) than the PFO‐TPy26T device (260 cd/m², 0.008%), because it has a smaller energy barrier to the injection of charges from PEDOT and Ca into the HOMO and LUMO levels. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4611–4620, 2006     

New highly luminescent cationic polyelectrolytes based on poly(phenylenevinylene‐alt‐fluorenevinylene) or poly(fluorenevinylene) derivatives and their neutral precursors

Poly(phenylenevinylene‐alt‐fluorenevinylene) ( PF ) or poly(fluorenevinylene) ( F ) derivatives that carried alkyl chains with terminal tertiary amino groups were successfully synthesized via Heck coupling. They were postquaternized by reacting with bromoethane to the corresponding cationic polyelectrolytes PFQ and FQ . The neutral polymers PF and F as well as the quaternized polymer FQ were soluble in common organic solvents such as THF, chloroform, dichloromethane, and toluene. In contrast, the quaternized polymer PFQ did not dissolve in these solvents but was soluble in environmentally friendlier solvents like water and alcohols. The neutral precursors exhibited higher thermal stability and glass‐transition temperatures than the corresponding quaternized counterparts. All polymers emitted intense blue‐greenish light in solution (462–489 nm) with relatively high photoluminescence (PL) quantum yields 0.32–0.57, and as thin films (475–557 nm) with optical band gaps of 2.48–2.57 eV. The water soluble PFQ could find potential applications as chemo or biosensor. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1481–1491, 2007     

Synthesis and characterization of diphenylaminodiphenyl stryl based alternating copolymers

Diphenylaminobiphenylated stryl based alternating copolymers with phenyl or fluorene, which were expected to have a terphenylene vinylene backbone containing an (N,N‐diphenylamino)biphenyl pendant and a phenyl/fluorene/phenylene vinylene backbone containing an (N,N‐diphenylamino)biphenyl pendant, were synthesized by a Suzuki coupling reaction. The obtained copolymers were confirmed with various types of spectroscopy. The alternating copolymers showed good hole‐injection properties because of their low oxidation potential and good solubility and high thermal stability with a high glass‐transition temperature. The alternating copolymers showed blue emissions because of the adjusted conjugation lengths; the maximum wavelength was 460 nm for poly{4,4′‐biphenylene‐α‐[4″‐(N,N′‐diphenylamino)diphenyl]vinylene‐alt‐5‐(2′‐ethylhexyloxy)‐2‐methoxybenzene} and 487 nm for poly{4,4′‐biphenylene‐α‐[4″‐(N,N′‐diphenylamino)diphenyl] vinylene‐alt‐9,9‐dihexylfluorene}. The maximum brightness of indium tin oxide/poly(3,4‐ethylene dioxythiophene)/polymer/LiF/Al devices with poly{4,4′‐biphenylene‐α‐[4″‐(N,N′‐diphenylamino)diphenyl]vinylene‐alt‐5‐(2′‐ethylhexyloxy)‐2‐methoxybenzene} or poly{4,4′‐biphenylene‐α‐[4″‐(N,N′‐diphenylamino)diphenyl]vinylene‐alt‐9,9‐dihexylfluorene} as the emitting layer was 250 or 1000 cd/m², respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 341–347, 2007     

Iridium complex grafted to 3,6‐carbazole‐alt‐tetraphenylsilane copolymers for blue electrophosphorescence

We designed a 3,6‐dibromo‐9‐hexyl‐9H‐carbazole derivative with the blue emissive iridium complex bis[2‐(4,6‐difluorophenyl)pyridyl‐N,C^2′](picolinato)iridium(III) (FIrpic) linked at the alkyl terminal. Based on this monomer, novel 3,6‐carbazole‐alt‐tetraphenylsilane copolymers grafted with FIrpic were synthesized by palladium‐catalyzed Suzuki coupling reaction, and the content of FIrpic in the polymers could be controlled by feed ratio of the monomers. The polymer films mainly show blue emission from FIrpic, and the emission intensity from the polymer backbones is much weaker compared with the doped analogues, which demonstrates an efficient energy transfer from polymeric host to covalently bonded guest. The phase separation in the polymers was suppressed, which can be identified by atomic force microscopy and designed electroluminescent (EL) devices. EL devices based on the polymers exhibited blue phosphorescence from FIrpic. The luminous efficiency of preliminary devices reached 2.3 cd/A, and the efficiency roll‐off at high current densities was suppressed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1859–1865, 2010     

Properties of well‐defined alternating and random copolymers of methacrylates and styrene prepared by controlled/living radical polymerization

The physical properties of well‐defined alternating copolymers poly(methyl methacrylate‐alt‐styrene) and poly(n‐butyl methacrylate‐alt‐styrene), prepared by reversible addition–fragmentation chain transfer polymerization in the presence of Lewis acids, were investigated with differential scanning calorimetry, wide‐angle X‐ray scattering, and dynamic mechanical measurements. The properties were compared with those of random copolymers of the same overall composition and the corresponding homopolymers. Wide‐angle X‐ray scattering data showed that the alternating copolymers possessed a more regular comonomer sequence than the random copolymers. The thermomechanical properties of alternating copolymers and random copolymers were quite similar and typical for amorphous polymers, but in one of the cases studied the glass‐transition temperature for alternating copolymer was remarkably higher than for the random copolymer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3440–3446, 2005     

Protein–induced aggregation of fluorescent conjugated polyelectrolytes with sulfonate groups: Synthesis and its sensing application

Anionically charged fluorescent conjugated polyelectrolytes of poly{[4,7‐(2,1,3‐benzothiadiazole)‐alt‐1,4‐phenylene]‐co‐[2,5‐bis(4‐sulfonatobutoxy)‐alt‐1,4‐phenylene]} ( P1 ) and poly{[4,7‐(bis(thiophen‐2‐yl)benzo‐2,1,3‐thiadiazole)‐alt‐1,4‐phenylene]‐co‐[2,5‐bis(4‐sulfonatobutoxy)‐alt‐1,4‐phenylene]} ( P2 ) were synthesized by Suzuki crosscoupling polymerization in the presence of a palladium catalyst. The conjugated polyelectrolytes with sulfonate groups, as efficient signal amplifying reporters, were carefully designed to be soluble in water over the entire pH range examined and interact with proteins through intermolecular forces. The polymers exhibited blue emission in aqueous solutions but green or red emission in solid form depending on the conjugation length due to intermolecular exciton migration. The anionic conjugated polymers exhibited blue‐to‐green or blue‐to‐red changes in fluorescence upon exposure to charged proteins, indicating that the polymers have potential applications in fluorescent array systems for protein. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Poly(fluorenevinylene) derivatives by Heck coupling: Synthesis,photophysics, and electroluminescence

Three new poly(fluorenevinylene) derivatives were synthesized, characterized, and used as emissive materials in light‐emitting diodes (LEDs). They were synthesized by Heck coupling of 9,9‐dihexyl‐2,7‐divinylfluorene with 2,7‐dibromo‐9,9‐dihexylfluorene, 2,3‐bis(4‐bromophenyl)quinoxaline, or 2,5‐bis(4‐bromophenyl)‐3,4‐diphenylthiophene to afford the polymers F , Q , and T , respectively. Polymers F and Q had medium number–average molecular weights (M_n ? 14,000) with relatively narrow polydispersity (1.3–1.6), while T was obtained as an oligomer (M_n ? 4000). All polymers were soluble in common organic solvents, such as tetrahydrofuran (THF), chloroform, dichloromethane, and toluene. They emitted blue‐greenish fluorescence light in dilute THF solution (444–491 nm), with photoluminescence (PL) quantum yields of 0.32–0.54, and in thin film (453–488 nm). LEDs with the configuration of ITO/PEDOT‐PSS/Polymer/Li:Al were fabricated and evaluated. The electroluminescence (EL) spectra of the Q and F polymers were very broad covering the blue–green–red region, whereas the spectrum of the polymer T was almost purely blue. The threshold electrical field for light emission of the devices was almost the same (?1.75 MV/cm). The external quantum efficiency of the devices of polymers Q and F was about 1.0 × 10^?3%, whereas that of polymer T was ?3.0 × 10^?5%. The fluorescence lifetime of polymers F and Q was significantly longer than that of the polymer T . © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4494–4507, 2006     

New blue electroluminescent n‐type polyfluorene copolymers with a 1,3,4‐oxadiazole unit in the main chain

Novel polyfluorene copolymers alternately having an 1,3,4‐oxadiazole unit in the main chain were prepared by both one‐step and two‐step methods for polyoxadiazole synthesis. They displayed highly efficient blue photoluminescence, the properties of which were affected by the extent of conjugation and the changes in the electron density by a side chain. An electrochemical analysis of the polymers using cyclic voltammetry suggested that they could be used as electron‐transport/hole‐blocking materials as well as blue emission materials for polymer light‐emitting diodes. A simple double‐layer device consisting of poly(N‐vinylcarbazole) as a hole‐transport layer and poly[(9,9′‐didodecylfluorene‐2,7‐diyl)‐alt‐((1,4‐bis(1,3,4‐oxadiazole)‐2,5‐di(2‐ethylhexyloxy)phenylene)‐5,5′‐diyl)] as an emission layer exhibited narrow blue electroluminescence with a maximum at 430 nm. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1058–1068, 2004     

Synthesis and optoelectronic properties of luminescent poly(p‐phenylenevinylene) derivatives containing electron‐transporting 1,3,4‐oxadiazole groups

Three random copolymers ( P1–P3 ) comprising phenylenevinylene and electron‐transporting aromatic 1,3,4‐oxadiazole segments (11, 18, 28 mol %, respectively) were prepared by Gilch polymerization to investigate the influence of oxadiazole content on their photophysical, electrochemical, and electroluminescent properties. For comparative study, homopolymer poly[2‐methoxy‐5‐(2′‐ethylhexyloxy)‐1,4‐p‐phenylenevinylene] ( P0 ) was also prepared by the same process. The polymers ( P0–P3 ) are soluble in common organic solvents and thermally stable up to 410 °C under a nitrogen atmosphere. Their optical properties were investigated by absorption and photoluminescence spectroscopy. The optical results reveal that the aromatic 1,3,4‐oxadiazole chromophores in P1–P3 suppress the intermolecular interactions. The HOMO and LUMO levels of these polymers were estimated from their cyclic voltammograms. The HOMO levels of P0–P3 are very similar (?5.02 to ?5.03 eV), whereas their LUMO levels decrease readily with increasing oxadiazole content (?2.7, ?3.08, ?3.11, and ?3.19 eV, respectively). Therefore, the electron affinity of the poly(p‐phenylenevinylene) chain can be gradually enhanced by incorporating 1,3,4‐oxadiazole segments. Among the polymers, P1 (11 mol % 1,3,4‐oxadiazole) shows the best EL performance (maximal luminance: 3490 cd/m², maximal current efficiency: 0.1 cd/A). Further increase in oxadiazole content results in micro‐phase separation that leads to performance deterioration. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4377–4388, 2007     

Synthesis,characterization, and photovoltaic properties of novel conjugated copolymers derived from phenothiazines

Two novel series of soluble alternating conjugated copolymers comprising 10‐alkylphenothiazine and bithiophene or 3‐pentylthieno[3,2‐b]thiophene moieties were synthesized using palladium‐catalyzed Suzuki coupling reaction. The structures of the polymers and their thermal, photophysical, electrochemical, and photovoltaic properties were characterized and investigated. The polymers exhibited good thermal stability with decomposition temperature in the region of 342–390 °C and their glass transition temperatures (T_g) ranging from 126 to 150 °C. All polymers demonstrate broad optical absorption in the region of 300–500 nm with efficient blue‐green light emission. They showed ambipolar redox properties with low HOMO levels around ?5.13 eV. Polymer solar cells were fabricated using blends of the copolymers and [6,6]‐phenyl‐C61‐butyric acid methyl ester (PCBM) in a 1:1 weight ratio. The maximum power conversion efficiency (η = 0.24%) was measured for the poly[3,7‐ (10‐hexylphenothiazine)‐alt‐bithiophene] as donor under simulated sun light (1000 W/m²). Open circuit voltages of up to 0.8 V have been obtained. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5266–5276, 2007     

Synthesis,characterization, photo‐induced alignment,and surface orientation of poly(9,9‐dioctylfluorene‐alt‐azobenzene)s

Three types of bi‐functionalized copolymers ( P1FAz , P2FAz , and P3FAz ) with different numbers of fluorene units and an azobenzene unit were synthesized and characterized using UV–vis and polarized absorption spectroanalysis. The trans‐cis photoisomerization was conformed under 400 nm light irradiation for all copolymers in chloroform. However, in the film state, only the trans‐cis photoisomerization occurred by mono‐fluorene attached copolymer poly[(9,9‐di‐n‐octylfluorenyl‐2,7‐diyl)‐alt‐4,4′‐azobenzene)] ( P1FAz ). Photo‐induced alignment was achieved using the P1FAz film after irradiation with linear polarized 400 nm light and subsequent annealing at 60 °C. Surface orientation of a spin‐coating film of poly(9,9‐didodecylfluorene) ( F12 ) was achieved using the photo‐induced alignment layer of the P1FAz film after annealing at 90 °C. The photo‐induced alignment layer of P1FAz has potential application to the surface orientation technique for appropriate polymers, which will be useful for the fabrication of optoelectronics devices. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of thiazolothiazole‐based polymers and their applications in polymer solar cells

A novel series of thiazolothiazole (Tz)‐based copolymers, poly[9,9‐didecylfluorene‐2,7‐diyl‐alt‐2,5‐bis‐(3‐hexylthiophene‐2‐yl)thiazolo[5,4‐d]thiazole] (P1), poly[9,9‐dioctyldibenzosilole‐2,7‐diyl‐alt‐2,5‐bis‐(3‐hexylthiophene‐2‐yl)thiazolo[5,4‐d]thiazole] (P2), and poly[4,4′‐bis(2‐ethylhexyl)‐dithieno[3,2‐b:2′,3′‐d]silole‐alt‐2,5‐bis‐(3‐hexylthiophene‐2‐yl)thiazolo[5,4‐d]thiazole] (P3), were synthesized for the use as donor materials in polymer solar cells (PSCs). The field‐effect carrier mobilities and the optical, electrochemical, and photovoltaic properties of the copolymers were investigated. The results suggest that the donor units in the copolymers significantly influenced the band gap, electronic energy levels, carrier mobilities, and photovoltaic properties of the copolymers. The band gaps of the copolymers were in the range of 1.80–2.14 eV. Under optimized conditions, the Tz‐based polymers showed power conversion efficiencies (PCEs) for the PSCs in the range of 2.23–2.75% under AM 1.5 illumination (100 mW/cm²). Among the three copolymers, P1, which contained a fluorene donor unit, showed a PCE of 2.75% with a short‐circuit current of 8.12 mA/cm², open circuit voltage of 0.86 V, and a fill factor (FF) of 0.39, under AM 1.5 illumination (100 mW/cm²). © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Novel blue‐greenish electroluminescent poly(fluorenevinylene‐alt‐dibenzothiophenevinylene)s and their model compounds

Poly(9,9‐dihexylfluorene‐2,7‐vinylene‐alt‐dibenzothiophene‐2,8‐vinylene) (PS) and poly(9,9‐dihexylfluorene‐2,7‐vinylene‐alt‐dibenzothiophene‐5,5‐dioxide‐2,8‐ vinylene) (PSO) as well as corresponding model compounds were synthesized by Heck coupling. Both the polymers and model compounds were readily soluble in common organic solvents such as tetrahydrofuran, dichloromethane, chloroform, and toluene. The polymers showed a decomposition temperature at ～430 °C and a char yield of about 65% at 800 °C in N₂. The glass‐transition temperatures of the polymers were almost identical (75–77 °C) and higher than those of the model compounds (26–45 °C). All samples absorbed around 390 nm, and their optical band gaps were 2.69–2.85 eV. They behaved as blue‐greenish light emitting materials in both solutions and thin films, with photoluminescence emission maxima at 450–483 nm and photoluminescence quantum yields of 0.52–0.72 in solution. Organic light‐emitting diodes with an indium tin oxide/poly(ethylene dioxythiophene):poly(styrene sulfonic acid)/polymer/Mg:Ag/Ag configuration with polymers PS and PSO as emitting layers showed green electroluminescence with maxima at 530 and 540 nm, respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6790–6800, 2006     

Grafting polymerization of styrene onto alternating terpolymers based on chlorotrifluoroethylene,hexafluoropropylene, and vinyl ethers,and their modification into ionomers bearing ammonium side‐groups

The grafting polymerization of styrene initiated by the alkyl chloride groups of poly(CTFE‐alt‐VE) and poly[(CTFE‐alt‐VE)‐co‐(HFP‐alt‐VE] copolymers (where CTFE, HFP, and VE stand for chlorotrifluoroethylene (CTFE), hexafluoropropylene (HFP), and vinyl ether (VE), respectively) followed by the chemical modification of the polystyrene grafts are presented. First, the fluorinated alternating copolymers were produced by radical copolymerization of CTFE (with HFP) and VE. Second, atom transfer radical polymerization enabled the grafting polymerization of styrene in the presence of the poly(CTFE‐alt‐VE)‐macroinitiator using the alkyl chloride group of CTFE as the initiation site. Kinetics of the styrene polymerization indicated that such a grafting had a certain controlled character. For the first time, grafting of polystyrene onto alternating fluorinated copolymers has been achieved. Differential scanning calorimetry thermograms of these graft copolymers exhibited two glass transition temperatures assigned to both amorphous domains of the polymeric fluorobackbone (ranging from ?20 to +56 °C) and the polystyrene grafts (ca. 95 °C). The thermostability of these copolymers increased on grafting. Thermal degradation temperatures at 5% weight loss were ranging from 193 to 305 °C when the polystyrene content varied from 81 to 27%. Third, chloromethylation of the polystyrene grafts followed by the cationization of the chloromethyl dangling groups led to original ammonium‐containing graft copolymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Diblock copolymers based on allyl methacrylate: Synthesis,characterization, and chemical modification

Different diblock copolymers constituted by one segment of a monomer supporting a reactive functional group, like allyl methacrylate (AMA), were synthesized by atom transfer radical polymerization (ATRP). Bromo‐terminated polymers, like polystyrene (PS), poly(methyl methacrylate) (PMMA), and poly(butyl acrylate) (PBA) were employed as macroinitiators to form the other blocks. Copolymerizations were carried out using copper chloride with N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) as the catalyst system in benzonitrile solution at 70 °C. At the early stage, the ATRP copolymerizations yielded well‐defined linear block copolymers. However, with the polymerization progress a change in the macromolecular architecture takes place due to the secondary reactions caused by the allylic groups, passing to a branched and/or star‐shaped structure until finally yielding gel at monomer conversion around 40% or higher. The block copolymers were characterized by means of size exclusion chromatography (SEC), ¹H NMR spectroscopy, and differential scanning calorimetry (DSC). In addition, one of these copolymers, specifically P(BA‐b‐AMA), was satisfactorily modified through osmylation reaction to obtain the subsequent amphiphilic diblock copolymer of P(BA‐b‐DHPMA), where DHPMA is 2,3‐dihydroxypropyl methacrylate; demonstrating the feasibility of side‐chain modification of the functional obtained copolymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3538–3549, 2007     

Alternatively linking fullerene and conjugated polymers

The stereo‐electronic control over bisadditions of conjugated polymers to fullerene (C₆₀) is explored in the formation of alternating copolymers. The chemistry, resulting configuration, and properties of poly(3‐hexylthiophene)‐alt‐C₆₀ copolymers prepared by either classic pyrrolidine ring formation or an atom transfer radical addition are compared. Both routes result in controlled additions of polymers to C₆₀. Extensive macromolecular modeling through PM6 methods indicate that there is no conjugation between P3HT and C₆₀ in the systems studied. This along with 2D‐NMR, AFM, and photovoltaic characterizations of the materials indicate the importance of the structure of the modified C₆₀ and the nature of the linking group between C₆₀ and P3HT segments in determining the morphology of the copolymers in the solid state. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2304–2317, 2009     

Relationship between the liquid crystallinity and field‐effect‐transistor behavior of fluorene–thiophene‐based conjugated copolymers

A series of fluorene–thiophene‐based semiconducting materials, poly(9,9′‐dioctylfluorene‐alt‐α,α′‐bisthieno[3,2‐b]thiophene) (F8TT2), poly(9,9′‐di(3,6‐dioxaheptyl)fluorene‐alt‐thieno[3,2‐b]thiophene) (BDOHF8TT), poly(9,9′‐di(3,6‐dioxaheptyl)fluorene‐alt‐bithiophene) (BDOHF8T2), and poly(9,9′‐dioctylfluorene‐co‐bithiophene‐co‐[4‐(2‐ethylhexyloxyl)phenyl]diphenylamine) (F8T2TPA), was synthesized through a palladium‐catalyzed Suzuki coupling reaction. F8TT2, BDOHF8TT, BDOHF8T2, and F8T2TPA films exhibited photoluminescence maxima at 523, 550, 522, and 559 nm, respectively. Solution‐processed field‐effect transistors (FETs) fabricated with all the copolymers except F8T2TPA showed p‐type organic FET characteristics. Studies of the differential scanning calorimetry scans and FETs of the polymers revealed that more crystalline polymers gave better FET device performance. The greater planarity and rigidity of thieno[3,2‐b]thiophene in comparison with bithiophene resulted in higher crystallinity of the polymer backbone, which led to improved FET performance. On the other hand, the random incorporation of the triphenylamine moiety into F8T2TPA caused the polymer chains to lose crystallinity, resulting in an absence of FET characteristics. With this study, we could assess the liquid‐crystallinity dependence of the field‐effect carrier mobility on organic FETs based on liquid‐crystalline copolymers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4709–4721, 2006     

Simple synthesis,photophysics, and electroluminescent properties of poly[2,7‐bis(4‐tert‐butylstyryl)fluorene‐9, 9‐diyl‐alt‐alkane‐α,ω‐diyl]

A simple synthetic route was used for the synthesis of a novel series of alternating copolymers based on substituted 2,7‐distyrylfluorene bridged through alkylene chains. First, 2,7‐dibromofluorene was reacted with 2 equiv of butyllithium, and this was followed by a treatment with 1 equiv of α,ω‐dibromoalkane to yield the intermediate, poly(2,7‐dibromofluorene‐9,9‐diyl‐alt‐alkane‐α,ω‐diyl). ( 1 ) Heck coupling of the latter with 1‐tert‐butyl‐4‐vinylbenzene afforded the target, poly[2,7‐bis(4‐tert‐butylstyryl)fluorene‐9,9‐diyl‐alt‐alkane‐α,ω‐diyl] ( 2 ). The two versions of 2 ( 2a and 2b which have hexane and decane, respectively, as alkane groups) were readily soluble in common organic solvents. Their glass‐transition temperature was relatively low (52 and 87 °C). An intense blue photoluminescence emission with maxima at about 408 and 409 nm was observed in tetrahydrofuran solutions, whereas thin films exhibited an orange emission with maxima at 569 and 588 nm. Very large redshifts of the photoluminescence maxima and Stokes shifts in thin films indicated strong aggregation in the solid state. Both polymers oxidized and reduced irreversibly. Single‐layer light‐emitting diodes with hole‐injecting indium tin oxide and electron‐injecting aluminum electrodes were fabricated. They emitted orange light with external electroluminescence efficiencies of 0.52 and 0.36% photon/electron, as determined in light‐emitting diodes made of 2a and 2b , with alkylenes of (CH₂)₆ and (CH₂)₁₀, respectively. An increase in the external electroluminescence efficiency up to 1.5% was reached in light‐emitting diodes made of polymer blends consisting of 2a and poly(9,9‐dihexadecylfluorene‐2,7‐diyl), which emitted blue‐white light. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 809–821, 2007.