Polymers from a levopimaric acid–acrylonitrile Diels–Alder adduct: Synthesis and characterization

The Diels–Alder adduct of levopimaric acid with acrylonitrile was efficiently prepared from resin acids. Excellent addition reaction yields (ca. 95%) were obtained. The adduct was converted into polyamides by polycondensation with diamines. When the same adduct was subjected to a dehydrodecarboxylation reaction, a novel ketone dinitrile derivative was obtained. This trifunctional product was also converted into polyamides by polycondensation with diamines. When the ketone dinitrile was hydrolyzed in the presence of alkalies and the reaction product was chlorinated, a ketone diacid chloride was obtained. A polyester was synthesized by the polycondensation of the diacid chloride with a diol. The structures of the Diels–Alder adduct, ketone dinitrile derivative, ketone diacid chloride, and polymers were established by means of elemental analysis, IR and NMR spectroscopy, and molecular weight determinations. Both the polyamides and the polyester were low‐molecular‐weight polymers soluble in polar solvents. The thermal behavior of the monomers and polymers was evaluated by thermogravimetric analysis. The thermal studies showed that the polymers were fairly thermostable substances, except the polyester, which appeared to be a substance with good thermal stability. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6308–6322, 2005     

Synthesis,characterization, and antimicrobial activity of some novel poly(ether ketone)s

Low molecular weight poly(ether ketone)s were synthesized from phenol, 1,4‐phenylenedioxy diacetylchloride, chloroacetylchloride, and dichloroalkanes [1,2‐dichloroethane and dichloromethane] by a Friedel–Crafts reaction with anhydrous aluminum chloride as a catalyst and carbon disulfide as a solvent. The conditions for the preparation of the poly(ether ketone)s and the chlorine contents obtained with the Carius method were examined, and a reaction scheme for each resin was established. The molecular weights and polydispersities of the resins were obtained by gel permeation chromatography. The polyketones were characterized by IR spectroscopy. The characteristic frequencies due to different functional groups were assigned. The thermal properties of the resins were studied with thermogravimetry and differential scanning calorimetry. The characteristic temperatures of thermal degradation for the poly(ether ketone)s were evaluated with thermogravimetric analysis. The kinetic parameters for the decomposition reactions of the resins were obtained with Broido and Doyle's method, and the heats of fusion were obtained from differential scanning calorimetry thermograms. The polyketones were thermally stable up to 200 °C. All the polyketones were tested for their microbial properties against bacteria, fungi, and yeast. The effect of poly(ether ketone)s on the growth of these microorganisms was investigated, and the polyketones were found to inhibit the growth of the microorganisms to a considerable extent. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2335–2344, 2003     

Synthesis and characterization of novel liquid‐crystalline copolymers containing thermally stable photochromic groups

To overcome the defects of the thermal instability of azobenzene, a series of novel photochromic, chiral, liquid‐crystalline monomers and polymers were synthesized from (+)‐camphor. The copolymerization of the photochromic monomers with comonomers was carried out. The synthesized monomers and polymers were identified with nuclear magnetic resonance, Fourier transform infrared, and elemental analysis. The composition of the copolymers was estimated with elemental analysis. The specific rotation of the chiral compounds and polymers was evaluated. The thermal stability and phases of the polymers during heating and cooling cycles were studied with differential scanning calorimetry and thermogravimetric analysis. The phases of the polymers were identified with polarized optical microscopy textures and X‐ray diffraction analysis. The distance between the layers of smectic liquid crystals was estimated from the diffraction angles. Photoisomerization of the configurational E/Z structures was investigated with an ultraviolet–visible spectrophotometer with 300‐nm ultraviolet irradiation. The thermal stability of the Z‐structural segment in the polymers was confirmed through the heating of the polymer at 70 °C for over 10 h. The photoisomerization and thermal stability of the C?C bond in the polymeric materials were demonstrated through a series of novel chiral polymers synthesized in this investigation. Both the polarity of the center part and the molecular length at the ends of the molecules were found to be necessary factors for the formation of liquid‐crystalline molecules. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2026–2037, 2007     

Synthesis and characterization of halogen‐containing poly(ether ketone ketone)s

A series of novel poly(ether ketone ketone)s (PEKKs) were synthesized from diphenyl ether and isophthaloyl chloride derivatives such as 5‐halo‐ and 5‐tert‐butyl‐isophthaloyl chloride. The aromatic electrophilic substitution route to polyketones was a convenient route for the preparation of the polymers in high yields via precipitation polycondensation at a low temperature with aluminum trichloride as a catalyst. High molecular weight PEKKs were achieved with number‐average molecular weights of 15,000–100,000 g/mol for polymers that showed good solubility in organic solvents. The presence of substituents greatly modified the spectroscopic features in comparison with those of unsubstituted isophthaloyl poly(ether ketone ketone)s, particularly for the series containing halogens, for which significant variations of the chemical shifts in both ¹H and ¹³C NMR spectra were observed; these shifts could be related to the nature of the halogen. Thermal properties were also affected by the presence of pendent substituents, with clear enhancements of the glass‐transition temperatures, which could be ascribed to the nature and bulkiness of the substituents. Thermogravimetric analyses showed that the new polymers had good thermal resistance, although an important drop in thermal resistance was observed for polymers bearing large halogen atoms, such as bromine and iodine. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2601–2608, 2002     

Synthesis and characterization of new,soluble polyazomethines bearing fluorene and carbazole units in the backbone and solubility‐improving moieties in the side group

A series of novel, soluble polyazomethines bearing fluorene and carbazole moieties in the main chain and solubility‐improving moieties in the side group (dibutyl, ethylhexyl, thienylethyloxy, furyl, and fluorenyl) were synthesized. Good‐quality films of these polymers were prepared through the conventional solution‐casting and drying processes. Depending on the polymer structure, some polymers showed a glass‐transition temperature (107–167 °C) and others showed a melting temperature (285–341 °C). The temperature of 5% weight loss under nitrogen atmosphere of the polymers ranged from 370 to 464 °C. The results indicated that the side groups incorporated into the polyazomethine structure in this work improved the polymer solubility without sacrificing thermal stability. Depending on the polymer structure, some of the polymers were crystalline whereas others were amorphous. All the polyazomethines were solution‐processable and thermally stable, making them potential candidate materials for applications in microelectronics and aerospace. Moreover, the features in the UV–visible spectra of the polyazomethines were redshifted as compared with those of the monomers from which the polymers were synthesized, indicating that these polymers, if combined with an appropriate doping agent to improve the light‐emitting and conducting abilities, may be good candidate materials for optoelectronic devices. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 825–834, 2004     

Effect of pendent oxyethylene moieties on the properties of aromatic polyisophthalamides

Twelve novel polyisophthalamides containing short sequences of oxyethylene as pendent substituents were synthesized by the reaction of three aromatic diamine monomers and four novel diacid monomers containing pendent oxyethylene units. Two of the diacid monomers were derived from 5‐hydroxyisophthalic acid and the other two diacid monomers were derived from 5‐aminoisophthalic acid. The polymers were prepared in high yield and high molecular weight by the phosphorylation method of polycondensation. All of the polymers were soluble in organic aprotic solvents at room temperature and gave creasable films by casting from solution. The mechanical properties of the films were reasonably good, with tensile strengths in the range of 70–100 MPa and moduli around 2.5 GPa. However, the presence of the oxyethylene side sequences greatly diminished the thermal resistance and the glass transition temperatures of the present polymers compared with wholly aromatic polyisophthalamides. A study was also made on the effect of the chemical composition on water uptake. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45:4671–4683, 2007     

Polyazomethines Bearing Furan Moieties. Solution Polycondensation of Bis(furanic diamine)s and Aromatic Dialdehydes

A series of new polyazomethines containing furan moieties was synthesized by polycondensation of bifuranic diamine monomers with commercially available aromatic dialdehydes viz., terephthaldehyde (TPA), isophthaldehyde (IPA). Inherent viscosities and number average molecular weights of polyazomethines were in the range 0.90–1.56 dL/g and 10460–17850 (SEC, polystyrene standard), respectively indicating formation of medium to reasonably high molecular weight polymers. The resulting polyazomethines were characterized by solubility tests, viscosity measurements, FTIR, NMR, UV spectroscopy, differential scanning calorimetric (DSC), and thermogravimetric analysis (TGA). These furan-based polyazomethines were essentially amorphous and exhibited glass transition temperatures (Tg) in the 150–190°C range. The temperature at 10% wt loss (T₁₀), determined from TGA of polyazomethines were in the range 300–380°C, indicating their good thermal stability.     

Novel heterocyclic poly(arylene ether ketone)s: Synthesis and polymerization of 4‐(4′‐hydroxyaryl)(2H)phthalazin‐1‐ones with methyl groups

Based on green chemistry, a simple and efficient direct synthesis of 4‐(4′‐hydroxyaryl)(2H)phthalazin‐1‐ones ( 2a–2f ) was developed in a two‐step reaction, in which the Friedel–Crafts acylation reaction of six phenols with phthalic anhydride was initially carried out and then followed by cyclization with hydrazine hydrate in good to excellent yields with high regioselectivity. A number of novel heterocyclic poly(arylene ether ketone)s were prepared conveniently from several unsymmetrical, twist, and noncoplanar phthalazinone‐containing monomers ( 2a–2f ) and an activated difluoro monomer via a N? C coupling reaction. It was very interesting that the obtained monomers and polymers exhibited diverse properties with the variation of the number and location of the substituted methyl groups. All these polymers had a high molecular weight with M_n and η_inh in the range of 44,960–169,000 Da and 0.38–0.79 dL/g, respectively. Actually, the obtained polymers displayed excellent thermal properties with T_g's ranging from 222 to 248 °C and 5% weight loss temperatures in nitrogen higher than 430 °C. Moreover, these polymers were readily soluble in common organic solvents, such as N‐methyl‐2‐pyrrolidone, chloroform, pyridine, and m‐cresol, and could be cast into flexible and colorless or nearly colorless films by spin‐coating or casting processes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1525–1535, 2007     

Low dielectric thermoset. II. Synthesis and properties of novel 2,6‐dimethyl phenol–dipentene epoxy

A 2,6‐dimethyl phenol–dipentene adduct was synthesized from dipentene (DP) and 2,6‐dimethyl phenol, and then a 2,6‐dimethyl phenol–DP epoxy was synthesized from the reaction of the resultant 2,6‐dimethyl phenol–DP adduct and epichlorohydrin. The proposed structures were confirmed by Fourier transform infrared, elemental analysis, mass spectra, NMR spectra, and epoxy equivalent weight titration. The synthesized 2,6‐dimethyl phenol–DP adduct was cured with 4,4‐diamino diphenyl methane, phenol novolac, 4,4‐diamino diphenyl sulfone, and 4,4‐diamino diphenyl ether. The thermal properties of the cured epoxy resins were studied with differential scanning calorimetry, dynamic mechanical analysis, dielectric analysis, and thermogravimetric analysis. These data were compared with those for the bisphenol A epoxy system. The cured 2,6‐dimethyl phenol–DP epoxy exhibited a lower dielectric constant (ca. 3.1), a lower dissipation factor (ca. 0.065), a lower modulus, lower thermal stability (5% degradation temperature = 366–424 °C), and lower moisture absorption (1.21–2.18%) than the bisphenol A system but a higher glass‐transition temperature (ca. 173–222 °C) than that of bisphenol A system. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4084–4097, 2002     

Preparation of poly(ether ketone)s derived from 2,5‐furandicarboxylic acid via nucleophilic aromatic substitution polymerization

From the viewpoint of the suppression of the petroleum consumption, aromatic poly(ether ketone)s (PEKs) were prepared by the nucleophilic aromatic substitution polymerization of 2,5‐bis(4‐fluorobenzoyl)furan (BFBF) synthesized from biomass and aromatic bisphenols. The model reaction of BFBF and p‐methoxyphenol revealed that BFBF possessed enough reactivity for the nucleophilic aromatic substitution reactions. The polymerizations of BFBF and aromatic bisphenols afforded high molecular weight polymers with good yields in N‐methylpyrrolidone and diphenyl sulfone for several hours. The longer polymerization time brought about the formation of insoluble parts in any solvents and reduction of molecular weight. The obtained PEKs were thermoplastics and exhibited good thermal stability, mechanical properties, and chemical resistance comparable to common high‐performance polymers. The thermal properties were tunable with the structure of bisphenols. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3094–3101     

Synthesis and characterization of 9,9‐bis(4‐hydroxyphenyl and 4‐aminophenyl)dibenzofluorenes: Novel fluorene‐based monomers

Two novel 9,9‐difunctionalized fluorene‐type monomers, 9,9‐bis(4‐hydroxyphenyl‐ and 4‐aminophenyl)‐2,3:6,7‐dibenzofluorenes, are synthesized by the reaction of dibenzenzofluorenone with phenol and aniline. These monomers are used for the preparation of polyester and polyimide as the typical polymers to evaluate the property change such as thermal stability caused by the benzene rings fused to the fluorene skeleton with keeping good solubility, in comparison with the polymers derived from simple fluorenone. In fact, these two new polymers have the fairly enhanced thermal stability and refractive index value along with satisfactory solubility in organic solvents, enough to emphasize the fusion effect. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2602–2605     

Synthesis and optical properties of fluorinated poly(arylene ether phosphine oxide)s

Fluorinated dihydroxy phosphine oxide monomers were synthesized via chlorination, Grignard, and demethylation techniques. The prepared monomer was successfully polymerized with each of the three perfluorinated monomers (decafluorobiphenyl, decafluorobenzophenone, and pentafluorophenylsulfide) by nucleophilic aromatic substitution. The average molecular weight ranged between 7800 and 14,900 g/mol. The glass‐transition temperatures of the polymers were registered in the range of 185–235 °C, and all the polymers exhibited high thermal stability up to 326–408 °C. The results of the refractive‐index measurements indicated control of the refractive index between 1.5181 and 1.5536 and an optical loss of 0.53 dB/cm at 1550 nm. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1497–1503, 2003     

Stereocomplex formation between enantiomeric poly(α‐methyl‐α‐ethyl‐β‐propiolactones): Effect of molecular weight

Optically pure S(?) and R(+)‐poly(α‐methyl‐α‐ethyl‐β‐propiolactones) (PMEPLs) of controlled low molecular weights were synthesized by anionic polymerization of the corresponding optically active monomers, and characterized using gel permeation chromatography, Maldi‐TOF mass spectrometry, and NMR spectroscopy. Blends of PMEPLs of opposite configurations and different molecular weights were investigated. All blends lead to the formation of a stereocomplex and its crystallization prevails over a wide range of mixing ratios. The stereocomplex melts 30–40 °C above that of the corresponding pure polymers, depending on the molecular weight; pairs of polymers having similar molecular weights exhibit the highest melting temperatures and enthalpies of fusion. Finally, when the stereocomplex is dispersed in a PMEPL matrix, it acts as a very effective nucleation agent for the crystallization of the polymer in excess. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2380–2389, 2007     

Synthesis and characterization of mono‐ and di‐methoxy substituted acrylate polymers containing photocrosslinkable pendant chalcone moiety

Two acrylate monomers – 4‐(2′‐methoxycinnamoyl)phenyl acrylate, and 4‐(2′,5′‐dimethoxycinnamoyl)phenyl acrylate – comprising photocrosslinkable pendant chalcone moiety and a free radical polymerizable group were synthesized. The monomers were polymerized in the presence of ethyl methyl ketone at 70°C using benzoyl peroxide as the initiator. The polymers were characterized by UV, FT‐IR, ¹H‐NMR, and ¹³C‐NMR spectra. The weight and number average molecular weights of the polymers were determined by gel permeation chromatography. The thermal stability of the polymers was studied by TGA under a nitrogen atmosphere. Glass transition temperatures of the polymers were studied by differential scanning calorimetry. The photoreactivity of the polymers was investigated for potential applications as photoresists in solution using various solvents. Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis of self‐photosensitizing polyesters containing donor–acceptor norbornadiene moieties and benzophenone groups and their photochemical reactions

The ring‐opening copolymerization of a glycidyl ester derivative having a benzophenone group and the donor–acceptor norbornadiene (D‐A NBD) dicarboxylic acid, 5‐(4‐methoxyphenyl)‐1,4,6,7,7‐pentamethyl‐2,5‐norbornadiene‐2,3‐dicarboxylic acid, monoglycidyl ester derivatives with D‐A NBD dicarboxylic anhydride using tetraphenylphosphonium bromide as a catalyst proceeded smoothly to give novel self‐photosensitizing NBD polymers in good yields. The molecular weight of these polyesters was about 4,000, and lower than that of analogous NBD polymers having no benzophenone group. All the synthesized NBD polymers isomerized smoothly to the corresponding quadricyclane (QC) polymers upon UV irradiation in tetrahydrofuran (THF) solution and in the film state. The rate of the photoisomerization of the D‐A NBD moieties in these polymers was higher than that of the D‐A NBD moieties in the polymer having no photosensitizing group. Furthermore, the rate of the photoisomerization of the D‐A NBD moieties in these polymers was also higher than that of the NBD polymer with low molecular weight photosensitizer in dilute solution. The photo‐irradiated polymers having QC moieties released thermal energies of 146–180 J/g. The D‐A NBD moieties contained in these NBD polymers possessed fair to good fatigue resistance. The degradation of the NBD moieties in these polymers was 15–30% after 50 repeated cycles of interconversion. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2978–2988, 2007     

Synthesis and properties of nitrogen‐linked poly(2,7‐carbazole)s as hole‐transport material for organic light emitting diodes

A novel class of carbazole polymers, nitrogen‐linked poly(2,7‐carbazole)s, was synthesized by polycondensation between two bifunctional monomers using the palladium‐catalyzed amination reaction. The polymers were characterized by ¹H NMR, Infrared, Gel permeation chromatography, and MALDI‐TOF MS and it was revealed that the combination of the monomer structures is important for producing high molecular weight polymers. Thermal analysis indicated a good thermal stability with high glass transition temperatures, e.g., 138 °C for the higher molecular weight polymer P2 . To pursue the application possibilities of these polymers, their optical properties and energy levels were investigated by UV‐Vis absorption and fluorescence spectra as well as their electrochemical characteristics. Although the blue light emission was indeed observed for all polymers in solution, the quantum yields were very low and the solid films were not fluorescent. On the other hand, the HOMO levels of the polymers estimated from the onset potentials for the first oxidation in the solid thin films were relatively high in the range of ?5.12 to ?5.20 eV. Therefore, light emitting diodes employing these polymers as a hole‐transport layer and iridium(III) complex as a triplet emitter were fabricated. The device of the nitrogen‐linked poly(2,7‐carbazole) P3 with p,p′‐biphenyl spacer, which has a higher HOMO level and a higher molecular weight, showed a much better performance than the device of P2 with m‐phenylene spacer. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3880–3891, 2009     

Polycarbazoles via C?N coupling reactions of phthaloyl bis‐9H‐carbazoles with activated difluorides

1,3‐Phthaloyl bis‐9H‐carbazole (MPC) and 1,4‐phthaloyl bis‐9H‐carbazole (PPC) were synthesized by a Friedel‐Crafts reaction of carbazole with terephthaloyl chloride or isophthaloyl chloride. Homopolymers were obtained by a C? N coupling reaction with activated difluorides and copolymers were synthesized with 4,4′‐biphenol as a comonomer by a nucleophilic substitution reaction between these NH‐ and OH‐containing monomers and the activated difluoro monomers. The inherent viscosities of the polymers ranged from 0.35 to 1.03 dL/g. These polymers exhibited glass‐transition temperatures greater than 238 °C with the PPC‐containing homopolymer showing the highest value, 326.4 °C. The thermal stabilities indicated no significant weight loss below 450 °C and the temperatures of 5% weight loss ranged from 514.0 to 546.3 °C. The polymers showed reasonable solubility in organic solvents such as DMAC, DMSO, and NMP. UV absorption and fluorescence emission properties are presented. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4326–4331, 2009     

Comparative study of classical surfactants and polymerizable surfactants (surfmers) in the reversible addition–fragmentation chain transfer mediated miniemulsion polymerization of styrene and methyl methacrylate

Cationic and anionic amphiphilic monomers (surfmers) were synthesized and used to stabilize particles in miniemulsion polymerization. A comparative study of classical cationic and anionic surfactants and the two surfmers was conducted with respect to the reaction rates and molecular weight distributions of the formed polymers. The reversible addition–fragmentation chain transfer process was used in the miniemulsion polymerization reactions to control the molecular weight distribution. The reaction rates of the surfmer‐stabilized miniemulsion polymerization of styrene and methyl methacrylate were similar (in most cases) to those of the classical‐surfactant‐stabilized miniemulsion polymerizations. The final particle sizes were also similar for polystyrene latexes stabilized by the surfmers and classical surfactants. However, poly(methyl methacrylate) latexes stabilized by the surfmers had larger particle sizes than latexes stabilized by classical surfactants. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 427–442, 2006     

Liquid‐crystalline organic–inorganic hybrid polymers with functionalized silsesquioxanes

Liquid‐crystalline (LC) hybrid polymers with functionalized silsesquioxanes with various proportions of LC monomer were synthesized by the reaction of polyhedral oligomeric silsesquioxane (POSS) macromonomer with methacrylate monomer having an LC moiety under common free‐radical conditions. The obtained LC hybrid polymers were soluble in common solvents such as tetrahydrofuran, toluene, and chloroform, and their structures were characterized with Fourier transform infrared, ¹H NMR, and ²⁹Si NMR. The thermal stability of the hybrid polymers was increased with an increasing ratio of POSS moieties as the inorganic part. Because of the steric hindrance caused by the bulkiness of the POSS macromonomer, the number‐average molecular weight of the hybrid polymers gradually decreased as the molar percentage of POSS in the feed increased. Their liquid crystallinities were very dependent on the POSS segments of the hybrid polymers behaving as hard, compact components. The hybrid polymer with 90 mol % LC moiety (Cube‐LC90) showed liquid crystallinity, larger glass‐transition temperatures, and better stability with respect to the LC homopolymer. The results of differential scanning calorimetry and optical polarizing microscopy showed that Cube‐LC90 had a smectic‐mesophase‐like fine‐grained texture. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4035–4043, 2001     

Methylol‐functional benzoxazines as precursors for high‐performance thermoset polymers: Unique simultaneous addition and condensation polymerization behavior

A new class of high‐performance resins of combined molecular structure of both traditional phenolics and benzoxazines has been developed. The monomers termed as methylol‐functional benzoxazines were synthesized through Mannich condensation reaction of methylol‐functional phenols and aromatic amines, including methylenedianiline (4,4′‐diaminodiphenylmethane) and oxydianiline (4,4′‐diaminodiphenyl ether), in the presence of paraformaldehyde. For comparison, other series of benzoxazine monomers were prepared from phenol, corresponding aromatic amines, and paraformaldehyde. The as‐synthesized monomers are characterized by their high purity as judged from ¹H NMR and Fourier transform infrared spectra. Differential scanning calorimetric thermograms of the novel monomers show two exothermic peaks associated with condensation reaction of methylol groups and ring‐opening polymerization of benzoxazines. The position of methylol group relative to benzoxazine structure plays a significant role in accelerating polymerization. Viscoelastic and thermogravimetric analyses of the crosslinked polymers reveal high T_g (274–343 °C) and excellent thermal stability when compared with the traditional polybenzoxazines. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012