ELECTROCHEMICAL COPOLYMERIZATION OF ANILINE AND AZURE B*

The electrochemical copolymerization of aniline and N,N,N'-trimethylthionin (azure B) in aqueous solutions hasbeen carried out using the potential sweep method, The optimum conditions for the coelectrodeposition are that the pH valueand the temperature of the electrolytic solution are controlled at 5.57 and 30℃, respectively, and the scan potential range isset between - 0.25 and 1.10 V (versus SCE). The copolymerization rate of aniline and azure B is about 3 times larger thanthat of aniline in the absence of azure B. The copolymerization of aniline and azure B was verified from the results of visiblespectra during electrolysis, FTIR spectra and the atomic force microscopy (AFM) images of the polymers. The in situ visiblespectrum for the electrolysis of the solution containing aniline and azure B is different from that of the respective aniline andazure B. The FTIR spectrum of the copolymer is not a superposition of that of polyaniline and poly(azure B). The AFMimage of the copolymer is different from those of polyaniline and poly(azure B) and is not a mixture of individual polymers.The conductivity of thc copolymer synthesized at pH 5.57 is four orders of magnitude higher than that of polyanilinesynthesized under the same conditions, bat in the absence of azure B. The clectrochemical properties of the copolymer aremainly attributed to polyaniline, but the copolymer has a better electrochemical reversibility and a much faster charge transferthan those of polyaniline.     

Chemical and electrochemical grafting of polyaniline onto poly(vinyl chloride): synthesis,characterization, and materials properties

We have designed and developed a new strategy for the chemical and electrochemical graft copolymerization of aniline onto poly(vinyl chloride). For this purpose, first phenylamine groups were incorporated into poly(vinyl chloride) via a nucleophilic substitution reaction in the presence of a solvent composed of 4‐aminophenol, potassium carbonate, and dry N,N‐dimethylformamide at room temperature, in order to avoid cross‐linking. The macromonomer obtained was used in chemical and electrochemical oxidation copolymerization with aniline monomer to yield a poly(vinyl chloride)‐g‐polyaniline (PVC‐g‐PANI) graft copolymer. The chemical structures of samples as representatives were characterized by means of Fourier transform infrared and ¹H nuclear magnetic resonance spectroscopies. The electroactivity behaviors of the synthesized samples were verified under cyclic voltammetric conditions. The electrical conductivity and electroactivity measurements showed that the PVC‐g‐PANI graft copolymer has lower electrical conductivity as well as electroactivity than those of the pure PANI. However, the lower electrical conductivity and electroactivity levels in this material can be improved at the price of solubility and processability. Moreover, the thermal behavior and chemical composition of the synthesized graft copolymer were investigated. Copyright © 2016 John Wiley & Sons, Ltd.     

Syntheses and characterizations of aniline/butylthioaniline copolymers: Comparisons of copolymers prepared by the new concurrent reduction and substitution route and the conventional oxidative copolymerization method

New highly solution‐processable aniline/butylthioaniline copolymers were prepared via oxidative copolymerization (OCP) and by concurrent reduction and substitution (CRS). Butylthio‐substituted polyaniline obtained via the CRS route (Pan‐SBu), being in line with the expected property changes after the addition of an electron‐donating substituent to an aromatic ring, displayed a lowered redox potential (E⁰) and a redshifted maximum wavelength (λ_max; ultraviolet–visible) in comparison with its parent unsubstituted polyaniline (Pan). However, copolymers CP1–CP4 (obtained via the OCP method) displayed opposite behaviors, showing higher E⁰ values and blueshifts in λ_max than the unsubstituted Pan. The results suggested that CP1–CP4 had shorter conjugation lengths than the unsubstituted Pan, possibly because of their chain conjugation defects (e.g., 1,3‐ring linkage structures), as evidenced by IR studies. The results of ¹H NMR studies also indicated that Pan‐SBu had much higher structural homogeneity than copolymer CP4. Because the CRS synthetic route involved no backbone alternations, the resultant copolymer (Pan‐SBu) should have maintained the same backbone structure and hence the high conductivity of the parent unsubstituted Pan. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1767–1777, 2005     

Glucose oxidase electrodes of polyaniline,poly(o‐toluidine) and their copolymer as a biosensor: a comparative study

A simple technique is described for constructing a glucose sensor by the entrapment of glucose oxidase (GOD) in a polyaniline (PA), poly(o‐toluidine) (POT) and their copolymer poly(aniline‐co‐o‐toluidine) (PA‐co‐POT) thin films, which were electrochemically deposited on a platinum plate in phosphate and acetate buffer. The maximum current response was observed for PA, POT, and PA‐co‐POT GOD electrodes at pH 5.5 and potential 0.60 V (v. Ag/AgCl). The phosphate buffer gives fast response as compared to acetate buffer in amperometric measurements. PA GOD electrode shows the fastest response followed by PA‐co‐POT and POT GOD electrodes. Copyright © 2004 John Wiley & Sons, Ltd.     

Synthesis and characterization of linear ABC triblock copolymer of ethylene oxide,methyl methacrylate,and styrene

A well‐defined linear ABC triblock copolymer of ethylene oxide (EO), methyl methacrylate (MMA), and styrene (St) was prepared by sequential living anionic and photo‐induced charge transfer polymerization (CTP) using p‐aminophenol as parent compound. In the first step, the diblock copolymer of PEO‐b‐PMMA with a protected aniline end group at PEO end was prepared by initiating of phenoxo‐anion the polymerization of EO and MMA successively, then the diblock copolymer of PEO‐b‐PMMA via deprotection of aniline at PEO end constituted a binary initiation system with benzophenone (BP) by charge transfer complex mechanism to initiate the polymerization of St under UV‐irradiation. The GPC and NMR measurements support that in copolymerization, either in the first or second step, neither homopolymer nor side reactions, such as chain transfer or chain termination, was found. The effect of the concentration of PEO_a‐b‐PMMA and St, and the polarity of solvent on the polymerization rate (R_p) of CTP is discussed. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 825–833, 1999     

Highly conductive soluble terpolymers of aniline,toluidine, and o‐aminobenzoic acid/m‐aminobenzenesulfonic acid

Two series of terpolymers, one of o‐/m‐toluidine and aniline with o‐aminobenzoic acid and the other of o‐/m‐toluidine and aniline with m‐aminobenzenesulfonic acid, have been synthesized by oxidative polymerization via an emulsion method with ammonium persulfate as the oxidant and HCl as the external dopant. The terpolymers exhibit excellent solubility and retain the high conductivity (∼1 S cm⁻¹) characteristic of the unsubstituted homopolymer, polyaniline. The terpolymers also possess higher thermal stability than polyaniline. This can be attributed to the presence of internal doping groups and substituents, which introduce flexibility to the otherwise rigid polyaniline backbone. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3040–3048, 2005     

Donor–acceptor‐based poly(toluidine‐co‐chloroaniline)s: Synthesis and characterization

A series of poly(o‐/m‐toluidine‐co‐o‐/m‐chloroaniline) copolymers of different compositions were synthesized by an emulsion method with ammonium persulfate as the oxidant. The conductivity of the copolymers was two to five orders of magnitude higher than that of the homopolymers poly(o‐toluidine) and poly(m‐chloroaniline). Among the copolymers, the copolymer of o‐toluidine and m‐chloroaniline exhibited a maximum conductivity of 0.14 S cm^?1. The conductivity of these copolymers was also higher than that of poly(aniline‐co‐chloroaniline). The properties of the copolymers were greatly influenced by the positions of the substituents and the concentrations of the individual monomers in the feed. All the copolymers were completely soluble in polar solvents such as dimethyl sulfoxide and showed higher heat stability as the chloroaniline concentration increased. These effects could be interpreted in terms of extensive hydrogen bonding and interchain linking and, therefore, higher electron delocalization in these copolymers due to the presence of electron‐rich toluidine rings adjacent to electron‐deficient chloroaniline. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1579–1587, 2005     

Nanocomposites of Sulfonic Polyaniline Nanoarrays on Graphene Nanosheets with an Improved Supercapacitor Performance

A new nanocomposite, poly(aniline‐co‐diphenylamine‐4‐sulfonic acid)/graphene (PANISP/rGO), was prepared by means of an in situ oxidation copolymerization of aniline (ANI) with diphenylamine‐4‐sulfonic acid (SP) in the presence of graphene oxide, followed by the chemical reduction of graphene oxide using hydrazine hydrate as a reductant. The morphology and structure of PANISP/rGO were characterized by field‐emission (FE) SEM, TEM, X‐ray photoelectron spectroscopy (XPS), Raman, FTIR, and UV/Vis spectra. The electrochemical performance was evaluated by cyclic voltammetry, galvanostatic charge–discharge, and electrochemical impedance spectroscopy. The PANISP/rGO nanocomposite showed a nanosized structure, with sulfonic polyaniline nanoarrays coated homogeneously on the surface of graphene nanosheets. This special structure of the nanocomposite also facilitates the enhancement of the electrochemical performance of the electrodes. The PANISP/rGO nanocomposite exhibits a specific supercapacitance up to 1170 F g^?1 at the current density of 0.5 A g^?1. The as‐prepared electrodes show excellent supercapacitive performance because of the synergistic effects between graphene and the sulfonic polyaniline copolymer chains.     

Synthesis of methallylic monomers bearing ammonium side‐groups and their radical copolymerization with chlorotrifluoroethylene

Methallylic monomers bearing triethyl or 4‐diazabicyclo[2.2.2]octane (DABCO) ammonium side‐groups are prepared and copolymerized with chlorotrifluoroethylene (CTFE). First, three different monomers are synthesized from chloro‐2‐methylprop‐1‐ene or 3‐chloro‐2‐chloromethylprop‐1‐ene in fair to good yields (57–95%). Then, several parameters (initiators, aqueous or solution processes, temperature) of the radical copolymerization of these monomers with chlorotrifluoroethylene are investigated. Various initiators are tested in the presence of ammonium perfluorooctanoate (APFO) as water‐soluble surfactant, and tert‐butyl peroxypivalate/APFO leads to the best results in a mixed solvent (H₂O/CH₃CN/C₄F₅H₅). In all experiments, the radical copolymerization shows that CTFE is more reactive than the methallylic monomer as evidenced by the characterization of poly(CTFE‐co‐M) copolymer by nuclear magnetic resonance spectroscopy and elemental analysis. Thermal degradation of these copolymers by thermogravimetric analyses indicates that the copolymers are stable up to 180 °C without any degradation and have a T_d,10% above 300 °C. Finally, their ionic exchange capacities range between 0.94 and 1.69 meq g^?1. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1721–1729     

Synthesis,Electrical Conductivity,Spectral and Thermal Stability Studies on Poly(aniline-co-o-nitroaniline)

o-Nitroaniline units were incorporated in the polyaniline backbone through copolymerization with aniline. The copolymers were synthesized for 1:3 and 1:1 molar ratios of aniline and o-nitroaniline in acidic medium using potassium persulphate as oxidant and their properties were compared with that of polyaniline. The polymers showed less electrical conductivity than polyaniline. Unlike polyaniline, the presence of nitro group caused higher frequency dependence of electrical conductivity. Electronic spectra showed a blue shift in both the band of the copolymers due to the decrease in the extent of conjugation leading to lower conductivity, which could also be explained in terms of a decrease of delocalization of electron as evinced from electron para magnetic resonance (EPR) data. Thermo gravimetric analysis (TGA) revealed that copolymer derived from 1:1 molar ratio showed comparable thermal stability with polyaniline and the one derived from 1:3 molar ratios is thermally less stable than polyaniline. Activation energies for thermal degradation were estimated using Broido equation. The temperature dependence of electrical conductivity suggested charge transport is mainly through variable range hopping.     

Preparation of densely grafted poly(aniline‐2‐sulfonic acid‐co‐aniline)s as novel water‐soluble conducting copolymers

Various densely grafted polymers containing poly(aniline‐2‐sulfonic acid‐co‐aniline)s as side chains and polystyrene as the backbone were prepared. A styryl‐substituted aniline macromonomer, 4‐(4‐vinylbenzoxyl)(N‐tert‐butoxycarbonyl)phenylamine (4‐VBPA‐^tBOC), was first prepared by the reaction of 4‐aminophenol with the amino‐protecting moiety di‐tert‐butoxyldicarbonate, and this was followed by substitution with 4‐vinylbenzyl chloride. 4‐VBPA‐^tBOC thus obtained was homopolymerized with azobisisobutyronitrile as an initiator, and this was followed by deprotection with trifluoroacetic acid to generate poly[4‐(4‐vinylbenzoxyl)phenylamine] (PVBPA) with pendent amine moieties. Second, the copolymerization of aniline‐2‐sulfonic acid and aniline was carried out in the presence of PVBPA to generate densely grafted poly(aniline‐2‐sulfonic acid‐co‐aniline). Through the variation of the molar feed ratio of aniline‐2‐sulfonic acid to aniline, various densely grafted copolymers were generated with different aniline‐2‐sulfonic acid/aniline composition ratios along the side chains. The copolymers prepared with molar feed ratios greater than 1/2 were water‐soluble and had conductivities comparable to those of the linear copolymers. Furthermore, these copolymers could self‐dope in water through intermolecular or intramolecular interactions between the sulfonic acid moieties and imine nitrogens, and this generated large aggregates. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1090–1099, 2005     

Polymerization of aniline derivatives by K2Cr2O7 and production of Cr2O3 nanoparticles

Oxidative polymerization of aniline, anthranilic acid, and aniline‐co‐anthranilic acid by potassium dichromate Cr(VI) as an oxidant in acidic medium was investigated. In this study, the polymerization process of aniline, o‐anthranilic acid as well as aniline/o‐anthranlic acid using K₂Cr₂O₇ produced, coordinated Cr(III)/polyaniline (PANI), Cr(III)/polyanthranilic acid (PAA) and Cr(III)/poly aniline‐co‐anthranilic acid (PANAA). The mechanism of polymerization reaction in the presence of dichromate was hypothesized. The precursor chromium doped polymers were characterized by TGA, FT‐IR, UV‐visible, XRD analyses. Cr₂O₃ nanoparticles size were determined using TEM analysis. The calcinations process of synthesized chromium doped PANI, PAA and PANAA yields Cr₂O₃ nanoparticles 26%, 31%, and 34% wt. respectively. Rhombohedral phase of Cr₂O₃ particles in the range from 33 to 61 nm was produced from chromium/polyanthranilic acid (PAA) and chromium/poly(aniline‐co‐anthranilic acid) PANAA. UV‐ visible analysis showed that optical band gaps (E_g) of doped poly aniline and its derivatives are in the range from1.55 to 1.80 using Tacu's law. The band gap values reveal that the doped chromium emeraldine base can be used as semiconductor materials. Copyright © 2016 John Wiley & Sons, Ltd.     

A polarity‐activation strategy for the high incorporation of 1‐alkenes into functional copolymers via RAFT copolymerization

A new synthetic methodology for the preparation of copolymers having high incorporation of 1‐alkene together with multifunctionalities has been developed by polarity‐activated reversible addition‐fragmentation chain transfer (RAFT) copolymerization. This approach provides well‐defined alternating poly(1‐decene‐alt‐maleic anhydride), expanding the monomer types for living copolymerizations. Although neither 1‐decene (DE) nor maleic anhydride (MAn) has significant reactivity in RAFT homopolymerization, their copolymers have been synthesized by RAFT copolymerizations. The controlled characteristics of DE‐MAn copolymerizations were verified by increased copolymer molecular weights during the copolymerization process. Ternary copolymers of DE and MAn, with high conversion of DE, could be obtained by using additive amounts (5 mol %) of vinyl acetate or styrene (ST), demonstrating further enhanced monomer reactivities and complex chain structures. When ST was selected as the third monomer, copolymers with block structures were obtained, because of fast consumption of ST in the copolymerization. Moreover, a wide variety of well‐defined multifunctional copolymers were prepared by RAFT copolymerizations of various functional 1‐alkenes with MAn. For each copolymerization, gel permeation chromatography analysis showed that the resulting copolymer had well‐controlled M_n values and fairly low polydispersities (PDI = 1.3–1.4), and ¹H and ¹³C NMR spectroscopies indicated strong alternating tendency during copolymerization with high incorporation of 1‐alkene units, up to 50 mol %. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3488–3498, 2008     

RAFT radical copolymerization of beta‐pinene with maleic anhydride and aggregation behaviors of their copolymer in aqueous solution

RAFT copolymerization of beta‐pinene and maleic anhydride was successfully achieved for the first time, using 1‐phenylethyl dithiobenzoate as chain transfer agent in a mixed solvent of tetrehydrofuran and 1.4‐dioxane (1:9, v/v) at a feed molar ratio of beta‐pinene to maleic anhydride as 3:7, and the alternating copolymer was prepared with predetermined molecular weight and narrow molecular weight distribution. Furthermore, using former alternating copolymer as a macro‐RAFT agent, block copolymer poly(beta‐pinene‐alt‐maleic anhydride)‐b‐polystyrene was synthesized in a chain extending with styrene. Hydrolysis of this block copolymer under acidic conditions formed a new amphiphilic block copolymers poly(beta‐pinene‐alt‐maleic acid)‐b‐polystyrene whose self‐assembly behaviors in aqueous solution at different pH were investigated through SEM and DLS. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1422–1429     

Appreciable norbornene incorporation in the copolymerization of ethylene/norbornene using titanium catalysts containing trianionic N[CH2CH(Ph)O]33− ligands

The newly synthesized 1‐TiCl (C₃ symmetric) and 2‐TiCl (C_s symmetric) precatalysts in combination with MAO polymerized ethylene, cyclic olefins, and copolymerized ethylene/norbornene in good yields. The catalyst with C₃ symmetry exhibits moderate catalytic activity and efficient norbornene incorporation for E/NBE copolymerization in the presence of MAO [activity = 360 kg polymer/(mol Ti h), ethylene 1 atm, NBE 5 mmol/mL, 10 min], affording poly(ethylene‐co‐NBE)s with high norbornene contents (42.0%) and the C_s symmetric catalyst showed an activity of 420 kg polymer/(mol Ti h), ethylene 1 atm, NBE 5 mmol/mL affording poly(ethylene‐co‐NBE)s with 33.0% norbornene content. The effect of monomer concentration at ambient temperature and constant Al/Ti ratio for the homo and copolymerization was studied in a detailed manner. We found that apart from the electronic environment around the metal center the steric environment provided by the symmetry of the catalyst systems has a considerable influence on the percentage of norbornene content of the copolymer obtained. We also found that with a given catalyst a variable clearly influencing the copolymer microstructure, hence also the copolymer properties, is the monomer concentration at a given feed ratio. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 444–452, 2008     

The kinetics of radical copolymerization of acrylonitrile and methylacrylate with tricaprylylmethylammonium chloride as a phase-transfer catalyst

The phase-transfer radical copolymerization of acrylonitrile (AN) and methylacrylate (MA) with tricaprylylmethylammonium chloride was investigated in Na₂S₂O₈ aqueous-organic two-phase system at 25°C and under nitrogen atmosphere. The rate of copolymerization was expressed as the combined terms of quaternary ammonium ion and peroxydisulfate ion in the aqueous phase rather than the fed concentrations of catalyst and Na₂S₂O₈. The observed initial rate of copolymerization was used to analyze the copolymerization mechanism with a cyclic phase-transfer initiation step in the heterogeneous liquid–liquid system. The monomer reactivity ratio r₁ and r₂ obtained from the analysis of copolymerization mechanism were 1.584 and 0.856, respectively. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3504–3512, 1999     

A novel voltammetric sensor for ascorbic acid based on molecularly imprinted poly(o-phenylenediamine-co-o-aminophenol)

A molecularly imprinted copolymer, poly(o-phenylenediamine-co-o-aminophenol) (PoPDoAP), was prepared as a new ascorbic acid (AA) sensor. The copolymer was synthesized by incorporation of AA as template molecules during the electrochemical copolymerization of o-phenylenediamine and o-aminophenol, and complementary sites were formed after the copolymer was electrochemically reduced in ammonium aqueous solution. The molecularly imprinted copolymer sensor exhibited a high sensitivity and selectivity toward AA. Differential pulse voltammograms (DPVs) showed a linear concentration range of AA from 0.1 to 10 mM, and the detection limit was calculated to be 36.4 μM. Compared to conventional polyaniline-based AA sensors, the analytical performance of the imprinted copolymer sensor was improved due to the broadened usable pH range of PoPDoAP (from pH 1.0 to pH 8.0). The sensor also exhibited a good reproducibility and stability. And it has been successfully applied in the determination of AA in real samples, including vitamin C tablet and orange juices, with satisfactory results.     

Tuning the Supramolecular Chirality of Polyaniline by Methyl Substitution

A game of Twister : The induced helicity of polyaniline and its supramolecular structures could be tuned by the methyl substitution of one of the monomers. By copolymerization of aniline with m‐toluidine, the helicity of copolymer (PMANI) nanofibers was totally inverted compared to that of polyaniline (PANI), while copolymer nanofibers with o‐toluidine (POANI) had the same helicity as that of polyaniline (see picture).

     

Electrocatalytic Oxidation of Some Carbohydrates by Nickel/Poly(o‐Aminophenol) Modified Carbon Paste Electrode

This study investigates the electrocatalytic oxidation of glucose and some other carbohydrates on nickel/poly(o‐aminophenol) modified carbon paste electrode as an enzyme free electrode in alkaline solution. Poly(o‐aminophenol) was prepared by electropolymerization using a carbon paste electrode bulk modified with o‐aminophenol and continuous cyclic voltammetry in HClO₄ solution. Then Ni(II) ions were incorporated to electrode by immersion of the polymeric modified electrode having amine group in 1 M Ni(II) ion solution. Cyclic voltammetric and chronoamperometric experiments were used for the electrochemical study of this modified electrode; a good redox behavior of Ni(OH)₂/NiOOH couple at the surface of electrode can be observed, the capability of this modified electrode for catalytic oxidation of glucose and other carbohydrates was demonstrated. The amount of α and surface coverage (Γ*) of the redox species and catalytic chemical reaction rate constant (k) for each carbohydrate were calculated. Also, the electrocatalytic oxidation peak currents of all tested carbohydrates exhibit a good linear dependence on concentration and their quantification can be done easily.     

Bioengineering functional copolymers. III. Synthesis of biocompatible poly[(N‐isopropylacrylamide‐co‐maleic anhydride)‐g‐poly(ethylene oxide)]/poly(ethylene imine) macrocomplexes and their thermostabilization effect on the activity of the enzyme penicillin G acylase

Stimuli‐responsive poly[(N‐isopropylacrylamide‐co‐maleic anhydride)‐g‐poly(ethylene oxide)]/poly(ethylene imine) macrobranched macrocomplexes were synthesized by (1) the radical copolymerization of N‐isopropylacrylamide and maleic anhydride with α,α′‐azobisisobutyronitrile as an initiator in 1,4‐dioxane at 65 °C under a nitrogen atmosphere, (2) the polyesterification (grafting) of prepared poly(N‐isopropylacrylamide‐co‐maleic anhydride) containing less than 20 mol % anhydride units with α‐hydroxy‐ω‐methoxy‐poly(ethylene oxide)s having different number‐average molecular weights (M_n = 4000, 10,000, or 20,000), and (3) the incorporation of macrobranched copolymers with poly(ethylene imine) (M_n = 60,000). The composition and structure of the synthesized copolymer systems were determined by Fourier transform infrared, ¹H and ¹³C NMR spectroscopy, and chemical and elemental analyses. The important properties of the copolymer systems (e.g., the viscosity, thermal and pH sensitivities, and lower critical solution temperature behavior) changed with increases in the molecular weight, composition, and length of the macrobranched hydrophobic domains. These copolymers with reactive anhydride and carboxylic groups were used for the stabilization of penicillin G acylase (PGA). The conjugation of the enzyme with the copolymers significantly increased the thermal stability of PGA (three times at 45 °C and two times at 65 °C). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1580–1593, 2003