Polyamides are very important polymers that find applications from commodities up to the automotive and biomedical sectors, and their impact is continuously growing. The synthesis of structurally significant, chiral, and sustainable polyamides is described via a new, convenient, and solvent‐free anionic polymerization of a biobased ε‐lactam, which is obtained from the renewable terpenoid ketone l ‐menthone in a one‐step synthesis. These polyamides are shown to have outstanding structural and thermal properties, which are thus introduced via the structure and chirality of the natural lactam monomer and which are discussed and compared with those of petroleum‐based, established, and commercial polyamide Nylon‐6. X‐ray data reveal a remarkable degree of crystallinity in these green polymers and emphasize the impact of their structural features on the resulting properties.
Cross‐linked azobenzene liquid‐crystalline polymer films with a poly(oxyethylene) backbone are synthesized by photoinitiated cationic copolymerization. Azobenzene moieties in the film surface toward the light source are simultaneously photoaligned during photopolymerization with unpolarized 436 nm light and thus form a splayed alignment in the whole film. The prepared films show reversible photoinduced bending behavior with opposite bending directions when different surfaces of one film face to ultraviolet light irradiation.
Anisometric polymer colloids are likely to behave differently when compared with centrosymmetric particles. Their study may not only shine new light on the organization of matter; they may also serve as building units with specific symmetries and complexity to build new materials from them. Polymer colloids of well‐defined complex geometries can be obtained by packing a limited number of spherical polymer particles into clusters with defined configurations. Such supracolloidal architectures can be fabricated at larger scales using narrowly dispersed emulsion droplets as templates. Assemblies built from at least two different types of particles as elementary building units open perspectives in selective targeting of colloids with specific properties, aiming for mesoscale building blocks with tailor‐made morphologies and multifunctionality. Polymer colloids with defined geometries are also ideal to study shape‐dependent properties such as the diffusion of complex particles.
A series of fluorene‐based conjugated polymers containing the aggregation‐induced emissive (AIE)‐active tetraphenylethene and dicarboxylate pseudocrown as a receptor exhibits a unique dual‐mode sensing ability for selective detection of lead ion in water. Fluorescence turn‐off and turn‐on detections are realized in 80%–90% and 20% water in tetrahydrofuran (THF), respectively, for lead ion with a concentration as low as 10−8 m .
The convergence of additive manufacturing and shape‐morphing materials is promising for the advancement of personalized medical devices. The capability to transform 3D objects from one shape to another, right off the print bed, is known as 4D printing. Shape memory thermosets can be tailored to have a range of thermomechanical properties favorable to medical devices, but processing them is a challenge because they are insoluble and do not flow at any temperature. This study presents here a strategy to capitalize on a series of medical imaging modalities to construct a printable shape memory endoluminal device, exemplified by a tracheal stent. A methacrylated polycaprolactone precursor with a molecular weight of 10 000 g mol−1 is printed with a UV‐LED stereolithography printer based on anatomical data. This approach converges with the zeitgeist of personalized medicine and it is anticipated that it will broadly expand the application of shape memory‐exhibiting biomedical devices to myriad clinical indications.
A substituted poly(9‐borafluorene) (P9BF) homopolymer, a boron congener of polyfluorene, is prepared by Yamamoto coupling of a triisopropylphenyl substituted borafluorene (1). As predicted by prior density functional theory (DFT) studies, P9BF has a reduced optical bandgap (Eg,opt = 2.28 eV) and a significantly lowered LUMO level (−3.9 eV, estimated by cyclic voltammetry (CV)) compared to polyfluorene. In addition to binding fluoride in solution, films of P9BF exhibit a reversible, simultaneous turn‐off/turn‐on fluorescence response to NH3 vapor. A 9‐borafluorene‐vinylene copolymer (P9BFV) is synthesized via Stille coupling, demonstrating that 1 can readily be incorporated into copolymers. The extended conjugation of P9BFV due to the inclusion of the vinylene group results in a reduced optical bandgap (2.12 eV) and LUMO (−4.0 eV, estimated by CV) compared to the homopolymer P9BF.
A thermo‐, photo‐ and chemoresponsive shape‐memory material is successfully prepared by introducing α‐cyclodextrin (αCD) and azobenzene (Azo) into a poly(acrylate acid)/alginate (PAA/Alg) network. The tri‐stimuli‐responsive formation/dissociation of αCD‐Azo acts as molecular switches freezing or increasing the molecular mobility. The resulting film herein can be processed into temporary shapes as needed and recovers its initial shape upon the application of light irradiation, heating, or chemical agent independently. Furthermore, the agar diffusion test suggests that the α‐CD‐Alg/Azo‐PAA has good biocompatibility for L929 fibroblast‐like cells.
The host–guest complexation between a porphyrin‐based 3D tetragonal prism ( H ) and electron‐rich pyrene is investigated. This host–guest molecular recognition is further utilized to suppress the liquid‐crystalline behavior of a nematic molecule ( G ) containing cyanobiphenyl mesogens functionalized with a pyrenyl unit. Furthermore, coronene, with an increased number of π‐electrons, is used as a competitive guest to recover the liquid‐crystalline behavior of G . This supramolecular approach provides a glimpse of the new possibilities to modulate the structures of the mesophases.
This review describes different synthetic strategies towards sequence‐defined, monodisperse macromolecules, which are built up by iterative approaches and lead to linear non‐natural polymer structures. The review is divided in three parts: solution phase‐, solid phase‐, and fluorous‐ and polymer‐tethered approaches. Moreover, synthesis procedures leading to conjugated and non‐conjugated macromolecules are considered and discussed in the respective sections. A major focus in the evaluation is the applicability of the different approaches in polymer chemistry. In this context, simple procedures for monomer and oligomer synthesis, overall yields, scalability, purity of the oligomers, and the achievable level of control (side‐chains, backbone, stereochemistry) are important benchmarks.
A recent response on a publication from our team investigating solvent effects on propagation rate coefficients is commented. Among other issues, we point to the fact that the response interprets only a subset of the data provided in our original contribution.
This work demonstrates a new reactive and functional hybrid (S‐MMA‐POSS) of polyhedral oligomeric silsesquioxane (POSS) and sulfur prepared with a direct reaction between a multifunctional methacrylated POSS compound (MMA‐POSS) and elemental sulfur (S8) through the “inverse vulcanization” process. S‐MMA‐POSS is an effective building block for imparting self‐healing ability to the corresponding thermally crosslinked POSS‐containing nanocomposites through a self‐curing reaction and co‐curing reaction with conventional thermosetting resins. Moreover, S‐MMA‐POSS is also a useful precursor for preparation of materials with high transparency in mid‐infrared region.
A self‐healing hydrogel is prepared by crosslinking acrylamide with a host–guest macro‐crosslinker assembled from poly(β‐cyclodextrin) nanogel and azobenzeneacrylamide. The photoisomerizable azobenzene moiety can change its binding affinity with β‐cyclodextrin, therefore the crosslinking density and rheology property of the hydrogel can be tuned with light stimulus. The hydrogel can repair its wound autonomously through the dynamic host–guest interaction. In addition, the wounded hydrogel will lose its ability of self‐healing when exposed to ultraviolet light, and the self‐healing behavior can be recovered upon the irradiation of visible light. The utilizing of host–guest macro‐crosslinking approach manifests the as‐prepared hydrogel reversible and light‐switchable self‐healing property, which would broaden the potential applications of self‐healing polymers.
Two‐dimensional (2D) palladium nanocube array is achieved on plasma‐etched block copolymer templates, while the well‐aligned nanocubes remain active. Anisotropic nanocubes are site‐selectively assembled on various nanopatterns by capillary force. The nanocube array is proved to be easily tunable, and the dimensional commensurability plays a key role in the configurations of the nanocube assemblies. Not only catalytic nanocube array under confinement but also template for the growth of nanoscale zinc oxide (ZnO) nanorods is exemplified as the potential application of the nanoarray.
Self‐initiated photografting polymerization is used to couple the polymerizable initiator monomer 2‐(2‐chloropropanoyloxy)ethyl acrylate to a range of polymeric substrates. The technique requires only UV light to couple the initiator to surfaces. The initiator surface density can be varied by inclusion of a diluent monomer or via selection of initiator and irradiation parameters. The functionality of the initiator surface is demonstrated by subsequent surface‐initiated atom transfer radical polymerization. Surfaces are characterized by x‐ray photoelectron spectroscopy (XPS), ellipsometry, and atomic force microscopy (AFM), and UV‐induced changes to the initiator are assessed by 1H NMR and gel permeation chromatography (GPC). This is the first time this one‐reactant one‐step technique has been demonstrated for creating an initiator surface of variable density.
The superior capabilities of structured microreactors over batch reactors are demonstrated for reversible addition–fragmentation chain transfer (RAFT) solution polymerization of n‐butyl acrylate with the aid of simulations, explicitly accounting for the chain length distribution of all macrospecies types. Since perfect isothermicity can be established in a microreactor, less side products due to backbiting and β‐scission are formed compared to the batch operation in which ineffective heat removal leads to an undesirable temperature spike. For a given RAFT chain transfer agent (CTA), additional microstructural control results under microflow conditions by optimizing the reaction temperature, lowering the dilution degree, or decreasing the initial molar ratio of monomer to RAFT CTA.
The synthesis of thiol‐functionalized long‐chain highly branched polymers (LCHBPs) has been accomplished in combination of ring‐opening metathesis polymerization (ROMP) and thiol‐Michael addition click reaction. A monotelechelic polymer with a terminal acrylate and many pendent thiol groups is first prepared through adding an internal cis‐olefin terminating agent to the reaction mixture immediately after the completion of the living ROMP, and then utilized as an ABn‐type macromonomer in subsequent thiol‐ene reaction between acrylate and thiol, yielding LCHBPs as the reaction time prolonged. Au nanoparticles are then covalently conjugated onto the surface of thiol‐functionalized LCHBP to fabricate novel hybrid nanostructures, which is shown as one interesting application of such functionalized metathesis polymers. This facile approach can be extended toward the fabrication of novel nanomaterials with sophisticated structures and tunable multifunctionalities.
In this article, taurine, one of the small biomolecules associated with bone metabolism, is firstly utilized to induce the fabrication of nano‐architectured conducting polypyrrole (NCPPy) on biomedical titanium in diverse pH values of phosphate buffer solution (PBS). Accordingly, the possible mechanism for the fabrication of NCPPy is proposed, which is dependent on the states of polytaurine from the polymerization of taurine, i.e., the inability of forming polytaurine and unordered restricted space results in taurine‐incorporated and polytaurine‐incorporated tightly packed nanoparticles (pH 6.2 and 8.0), respectively, and however, ordered restricted space constructed by polytaurine chains induces the fabrication of polytaurine‐incorporated nanopillars (pH 6.8) and polytaurine‐incorporated nanowire networks (pH 7.4).
This work demonstrates a new halogenation reaction through sequential radical and halogen transfer reactions, named as “radical and atom transfer halogenation” (RATH). Both benzoxazine compounds and poly(2,6‐dimethyl‐1,4‐phenylene oxide) have been demonstrated as active species for RATH. Consequently, the halogenated compound becomes an active initiator of atom transfer radical polymerization. Combination of RATH and sequential ATRP provides an convenient and effective approach to prepare reactive and crosslinkable polymers. The RATH reaction opens a new window both to chemical synthesis and molecular design and preparation of polymeric materials.
A triblock copolymer containing the complementary hydrogen bonding recognition pair ureidoguanosine–diaminonaphthyridine (UG–DAN) as pendant functional groups is synthesized using ring‐opening metathesis polymerization (ROMP). The norbornene‐based DAN monomer is shown to allow for a controlled polymerization when polymerized in the presence of a modified‐UG molecule that serves as a protecting group, subsequently allowing for the fabrication of functionalized triblock copolymers. The self‐assembly of the copolymers was characterized using dynamic light scattering and 1H NMR spectroscopy. It is demonstrated that the polymers self‐assemble via complementary hydrogen bonding motifs even at low dilutions, indicating intramolecular interactions.
A simple and effective airflow method to prepare sandwich‐type block copolymer films is reported. The films are composed of three layers: vertically oriented nanocylinders align in both upper and bottom layers and irregular nanocylinders exist in the bulk of the film. The vertically oriented nanocylinders in both sides can provide high accessibility to ions and ensures the exchange of chemical species between the membrane and external environment, while the irregularly oriented nanocylinders in the middle part of the film can prolong the pathway of ions transportation and enhance ions selectivity.
