All‐optical signal processing on nonlinear photonic chips is a burgeoning field. These processes include light generation, optical regeneration and pulse metrology. Nonlinear photonic chips offer the benefits of small footprints, significantly larger nonlinear parameters and flexibility in generating dispersion. The nonlinear compression of optical pulses relies on a delicate balance of a material's nonlinearity and optical dispersion. Recent developments in dispersion engineering on a chip are proving to be key enablers of high‐efficiency integrated optical pulse compression. We review the recent advances made in optical pulse compression based on nonlinear photonic chips, as well as the future outlook and challenges that remain to be solved.
Open‐access microcavities are emerging as a new approach to confine and engineer light at mode volumes down to the λ3 regime. They offer direct access to a highly confined electromagnetic field while maintaining tunability of the system and flexibility for coupling to a range of matter systems. This article presents a study of coupled cavities, for which the substrates are produced using Focused Ion Beam milling. Based on experimental and theoretical investigation the engineering of the coupling between two microcavities with radius of curvature of 6 m is demonstrated. Details are provided by studying the evolution of spectral, spatial and polarisation properties through the transition from isolated to coupled cavities. Normal mode splittings up to 20 meV are observed for total mode volumes around . This work is of importance for future development of lab‐on‐a‐chip sensors and photonic open‐access devices ranging from polariton systems to quantum simulators.
A diode‐pumped Yb:YAG MOPA‐System for the unprecedented generation of transform limited pulses with variable pulse duration in the range between 10 ps and 100 ps is presented. First applications relying on unique pulse parameters as modulation free spectrum, tunability and coherence length, namely the direct laser interference patterning (DLIP) and laser cooling of stored relativistic ion beams are highlighted. Pulses are generated by a mode‐locked fs‐oscillator while the spectral bandwidth is narrowed in the subsequent regenerative amplifier by an intra‐cavity grating monochromator. Two alternative booster amplifiers were added to increase the pulse energy to 100 μJ and 10 mJ, respectively.
Microresonator‐based Kerr frequency comb (microcomb) generation can potentially revolutionize a variety of applications ranging from telecommunications to optical frequency synthesis. However, phase‐locked microcombs have generally had low conversion efficiency limited to a few percent. Here we report experimental results that achieve conversion efficiency ( on‐chip comb power excluding the pump) in the fiber telecommunication band with broadband mode‐locked dark‐pulse combs. We present a general analysis on the efficiency which is applicable to any phase‐locked microcomb state. The effective coupling condition for the pump as well as the duty cycle of localized time‐domain structures play a key role in determining the conversion efficiency. Our observation of high efficiency comb states is relevant for applications such as optical communications which require high power per comb line.
We demonstrate a high optoelectronic performance and application potential of our random network, with subwavelength diameter, ultralong, and high‐quality silver nanowires, stabilized on a substrate with a UV binder. Our networks show very good optoelectronic properties, with the single best figure of merit of ∼1686, and excellent stability under harsh mechanical strain, as well as thermal, and chemical challenge. Our network transparency strongly exceeds the simple shading limit. We show that this transmission enhancement is due to plasmonic refraction, which in an effective medium picture involves localized plasmons, and identify the inhomogeneous broadening as the key factor in promoting this mechanism. Such networks could become a basis for a next generation of ultrahigh‐performance transparent conductors.
Entangled photon pairs must often be spatially separated for their subsequent manipulation in integrated quantum circuits. Separation that is both deterministic and universal can in principle be achieved through anti‐coalescent two‐photon quantum interference. However, such interference‐facilitated pair separation (IFPS) has not been extensively studied in the integrated setting, which has important implications on performance. This work provides a detailed review of IFPS and examines how integrated device dependencies such as dispersion impact separation fidelity and interference visibility. The analysis applies equally to both on‐chip and in‐fiber implementations. When coupler dispersion is present, the separation performance can depend on photon bandwidth, spectral entanglement and the dispersion. By design, reduction in the separation fidelity due to loss of non‐classical interference can be perfectly compensated for by classical wavelength demultiplexing effects. This work informs the design of devices for universal photon pair separation of states with tunable arbitrary properties.
Wide‐angle, polarization‐independent structural reflective colors from both directions based on a one‐dimensional photonic crystal are demonstrated. Our device produces a distinct and saturated color with high angular tolerant performance up to ±70° for any polarization state of an incident light wave, which is highly desirable for a broad range of research areas. Moreover, the purity of the color and luminous intensity of the proposed device are improved as compared to conventional colorant‐based color filters and colloidal glasses. The present approach may have the potential to replace existing color filters and pigments and pave the way for various applications, including color displays and image sensor technologies.
In this work, we report optomechanical coupling, resolved sidebands and phonon lasing in a solid‐core microbottle resonator fabricated on a single mode optical fiber. Mechanical modes with quality factors (Qm) as high as 1.57 × 104 and 1.45 × 104 were observed, respectively, at the mechanical frequencies and . The maximum Hz is close to the theoretical lower bound of 6 × 1012 Hz needed to overcome thermal decoherence for resolved‐sideband cooling of mechanical motion at room temperature, suggesting microbottle resonators as a possible platform for this endeavor. In addition to optomechanical effects, scatter‐induced mode splitting and ringing phenomena, which are typical for high‐quality optical resonances, were also observed in a microbottle resonator.
The realization of an ultra‐fast source of heralded single photons emitted at the wavelength of 1540 nm is reported. The presented strategy is based on state‐of‐the‐art telecom technology, combined with off‐the‐shelf fiber components and waveguide non‐linear stages pumped by a 10 GHz repetition rate laser. The single photons are heralded at a rate as high as 2.1 MHz with a heralding efficiency of 42%. Single‐photon character of the source is inferred by measuring the second‐order autocorrelation function. For the highest heralding rate, a value as low as 0.023 is found. This not only proves negligible multi‐photon contributions but also represents one of the best measured values reported to date for heralding rates in the MHz regime. These performances, associated with a device‐like configuration, are key ingredients for both fast and secure quantum communication protocols.
A Luneburg lens is a fascinating gradient refractive index (GRIN) lens that can focus parallel light on a perfect point without aberration in geometrical optics. Constructing a three‐dimensional (3D) Luneburg lens at optical frequencies is a challenging task due to the difficulty of fabricating the desired GRIN materials. Here, we present the practical implementation of a 3D Luneburg lens at optical frequencies. Such a 3D Luneburg lens is designed with GRIN 3D simple cubic metamaterial structures, and fabricated with dielectric metamaterials by femtosecond laser direct writing in the commercial negative‐photoresist IP‐L. Simulated and experimental results exhibit an interesting 3D ideal focus for the infrared light. The protocol for developing the 3D Luneburg lens with ideal focus would prompt the potential applications in integrated light‐coupled devices and lab‐on‐chip integrated biological sensors based on infrared light.
The dielectric metasurface hologram promises higher efficiencies due to lower absorption than its plasmonic counterpart. However, it has only been used, up to now, for controlling linear‐polarization photons to form single‐plane holographic images in the near‐infrared region. Here, we report a transmission‐type metahologram achieving images in three colors, free from high‐order diffraction and twin‐image issues, with 8‐level modulation of geometric phase by controlling photon spin via precisely patterned Si nanostructures with varying orientations. The resulting real and virtual holographic images with spin dependence of incident photons natively enable the spin degeneracy removal of light, leading to a metahologram‐enabled spin Hall effect of light. Low‐absorption dielectrics also enable us to create holograms for short‐wavelength light down to 480 nm, thus spanning the three primary colors. It possesses the potential for compact color‐display chips using mature semiconductor processes, and holds significant advantages over previous metaholograms operating at longer wavelengths.
Rectangular arrays of pyramidal recesses coated by silver film are investigated by means of polarization‐resolved nonlinear microscopy at 900 nm fundamental wavelength, demonstrating strong dependence of the dipole‐allowed SHG upon the lattice parameters. The plasmonic band gap causes nearly complete SHG suppression in arrays of 650 nm periodicity, whereas a sharp resonance at 550 nm periodicity is observed due to excitation of band edge Bloch states at fundamental frequency, accompanied by symmetry‐constrained interactions with similar modes at the second‐harmonic frequency. Additionally, coupling with modes at the bottom side of the silver film may lead to extraordinary optical transmission, opening a channel for SHG from the highly nonlinear GaAs substrate. Changing the lattice geometry enables SHG intensity modulation over three orders of magnitude, while the effective nonlinear anisotropy can be continuously switched between the two lattice directions, reaching values as high as ±0.96.
We report high‐power frequency conversion of a Yb‐doped fiber laser using a double‐pass pumped external‐cavity diamond Raman oscillator. Pumping with circular polarization is shown to be efficient while facilitating high‐power optical isolation between the pump and Raman laser. We achieved continuous‐wave average power of 154 W with a conversion efficiency of 50.5% limited by backward‐amplified light in the fiber laser. In order to prove further scalability, we achieved a maximum steady‐state Raman‐shifted output of 381 W with 61% conversion efficiency and excellent beam quality using 10 ms pump pulses, approximately a thousand times longer than the transient thermal time‐constant. No power saturation or degradation in beam quality is observed. The results challenge the present understanding of heat deposition in Raman crystals and foreshadow prospects for reduced thermal effects in diamond than originally anticipated. We also report the first experimental evidence for stimulated Brillouin scattering in diamond.
This work presents analytical, numerical and experimental demonstrations of light diffracted through a logarithmic spiral (LS) nanoslit, which forms a type of switchable and focus‐tunable structure. Owing to a strong dependence on the incident photon spin, the proposed LS‐nanoslit converges incoming light of opposite handedness (to that of the LS‐nanoslit) into a confined subwavelength spot, while it shapes light with similar chirality into a donut‐like intensity profile. Benefitting from the varying width of the LS‐nanoslit, different incident wavelengths interfere constructively at different positions, i.e., the focal length shifts from 7.5 μm (at λ = 632.8 nm) to 10 μm (at λ = 488 nm), which opens up new opportunities for tuning and spatially separating broadband light at the micrometer scale.
Dynamic charge carriers play a vital role in active photonic quantum/nanodevices, such as electrically pumped semiconductor lasers. Here we present a systematic experimental study of gain‐providing charge‐carrier distribution in a lasing interband cascade laser. The unique charge‐carrier distribution profile in the quantum‐well active region is quantitatively measured at nanometer scales by using a noninvasive scanning voltage microscopy technique. Experimental results clearly confirm the accumulation and spatial segregation of holes and electrons in the beating heart of the device. The measurement also shows that the charge‐carrier density is essentially clamped in the presence of stimulated emission at low temperatures. The threshold charge‐carrier density exhibits a linear but fairly weak temperature dependence, in contrast to the exponential temperature dependence of the threshold current. The experimental approach will lead to a deeper understanding of fundamental processes that govern the operation and performance of nanoelectronic devices, quantum devices and optoelectronic devices.
Branched photonic structures have served as paramount important components for nanophotonic integration and circuitry. However, these structures are generally constructed with photonic and plasmonic nanowires, which are nonbiomaterials and often need to be specially engineered to interface with cells and biological system. For bionanophotonics, photonic components assembled with self‐adaptive biomaterials are highly desirable to be directly interfaced with the dynamic biological system. In this work, branched structures for bionanophotonics assembled with natural living biomaterials, i.e., nanorod‐shaped Escherichia coli bacteria are reported. The E. coli cells were orderly trapped using a specially desired tapered optical fiber, forming structures with different branches and lengths. Light‐propagation performances along these branched structures were investigated, and the robustness property of the structures were demonstrated. The results show that the bacteria‐based branched structures provide different promising self‐sustainable and evolvable components, such as multidirectional waveguides and beam splitters, for bionanophotonics by connecting the biological and optical worlds with a seamless interface.
The interaction of light with nanostructured materials provides exciting new opportunities for investigating classical wave analogies of quantum phenomena. A topic of particular interest forms the interplay between wave physics and chaos in systems where a small perturbation can drive the behavior from the classical to chaotic regime. Here, we report an all‐optical laser‐driven transition from order to chaos in integrated chips on a silicon photonics platform. A square photonic crystal microcavity at telecom wavelengths is tuned from an ordered into a chaotic regime through a perturbation induced by ultrafast laser pulses in the ultraviolet range. The chaotic dynamics of weak probe pulses in the near infrared is characterized for different pump‐probe delay times and at various positions in the cavity, with high spatial accuracy. Our experimental analysis, confirmed by numerical modelling based on random matrices, demonstrates that nonlinear optics can be used to control reversibly the chaotic behavior of light in optical resonators.
We uncover that the breaking point of the ‐symmetry in optical waveguide arrays has a dramatic impact on light localization induced by the off‐diagonal disorder. Specifically, when the gain/loss control parameter approaches a critical value at which ‐symmetry breaking occurs, a fast growth of the coupling between neighboring waveguides causes diffraction to dominate to an extent that light localization is strongly suppressed and the statistically averaged width of the output pattern substantially increases. Beyond the symmetry‐breaking point localization is gradually restored, although in this regime the power of localized modes grows upon propagation. The strength of localization monotonically increases with disorder at both broken and unbroken ‐symmetry. Our findings are supported by statistical analysis of parameters of stationary eigenmodes of disordered‐symmetric waveguide arrays and by analysis of dynamical evolution of single‐site excitations in such structures.
We report a high‐repetition‐rate picosecond fiber‐based source at 2.1 µm offering exceptional performance capabilities over existing lasers near this wavelength, providing high average power and efficiency together with excellent spectral, power and beam pointing stability, in high spatial beam quality. This new source is based on a near‐degenerate MgO:PPLN optical parametric oscillator (OPO) pumped by an Yb‐fiber laser at 1064 nm, and incorporating a diffraction grating for spectral control. The device provides as much as 7.1 W of average power at 2.1 µm for a pump power of 18 W at an extraction efficiency of 39.4% in pulses of 20 ps at 79.3 MHz. The output exhibits passive power stability better than 1% rms over 15 hours, and a beam pointing stability ∼40 µrad over 1 hour, in high spatial quality with M2 ∼ 3.5. The output beam is linearly polarized and the pulse train has an amplitude stability better than 3.4% rms over 2 µsec. Radio‐frequency measurements of the output pulse train also confirm high temporal stability and low timing jitter, indicating that the source is ideal for variety of applications including pumping long‐wavelength mid‐infrared OPOs. Photograph shows the temperature‐controlled, 50‐mm‐long MgO:PPLN crystal inside the cavity, used as nonlinear gain medium in the picosecond source operating at 2.1 µm. The visible light is the result of non‐phase‐matched second harmonic generation of the pump beam in the MgO:PPLN crystal.
Nonlinear dynamics of continuous‐wave pumped regenerative amplifiers operating at 2 μm are investigated. At repetition rates near 1 kHz, three different operation regimes are observed, including stable regular, chaotic, and subharmonic dynamics. Numerical simulations reproduce this behavior in a quantitative way. In particular, we find stable periodic doubling regimes in which every other seed pulse experiences high gain. Exploiting a narrow parameter window beyond the onset of chaos enables operation of a high‐gain picosecond Ho:YLF regenerative amplifier which delivers up to 16 mJ picosecond pulses at 2050 nm. Energy fluctuations of the 700 Hz pulse train are as low as 0.9% rms.
