This study presents a molecular model for the amplitude‐dependent dynamic moduli of polymer melts reinforced with nanoparticles. This study shows that intense strain‐thinning reported in experimental studies of polymer nanocomposites can be attributed to disentanglement of bulk polymer chains from those strongly adsorbed to the surface of nanoparticles. This flow‐induced relaxation is what is frequently termed as convective constraint release and is similar to the cohesive slip of polymer melt at solid interfaces.
An advanced Monte Carlo (MC) method is developed, using weight‐based selection of polymer chains, to predict the molecular weight distribution (MWD) and branching level for arborescent polyisobutylene (arbPIB) at the end of a batch reaction. This new weight‐based MC method uses differential equations and random numbers to determine the detailed structure of arbPIB molecules. Results agree with those from an advanced number‐based MC method. The proposed weight‐based algorithm requires approximately twice the computation time of the number‐based method, but produces more accurate results in the high‐molecular‐weight portion of the MWD when the same number of polymer chains is assembled.
The structural determination and manipulation of bottle‐brush polymers, a class of polymers with serially grafted side‐chains, is challenging due to the interplay of side‐chain and backbone interactions over various length scales. The present work performs a detailed analysis, using molecular dynamics simulation techniques, to unravel these interactions by probing the distinct rod to a flexible real‐chain with self‐avoiding walk (SAW) type crossover in the backbone static structure factor. This analysis elucidates the deviation from flexible chain behavior, while also providing a quantitative measure of persistence length, . Significantly, the results identify a trend in which is consistent with the debated theoretical prediction of , where Ns is the number of monomers in each side‐chain of the bottle‐brush polymer.
A facile and versatile approach to constructing colorless surface coatings based on green tea polyphenols is reported, which can further act as a photoinitiating layer to initiate radical polymerization. These colorless green tea polyphenol coatings are capable of successfully photografting polymer brushes, and the resulting polymer brush patterns show spatial shape adjustability by masked UV irradiation. Both surface modifications and photografted polymer brushes do not alter the original color of the substrates. This method could be promising for the development of surface modifications.
A novel oral delivery system consisting of thermoresponsive zwitterionic poly(sulfobetaine methacrylate) (PSBMA) and pH‐responsive poly(2‐(diisopropylamino)ethyl methacrylate) (PDPA) is synthesized via free radical polymerization. This copolymer can self‐aggregate into nanoparticles via electrostatic attraction between ammonium cation and sulfo‐anion of PSBMA and successfully encapsulate anticancer drug, curcumin (CUR), with highest loading content of 2.6% in the P(SBMA‐co‐DPA) nanoparticles. The stimuli‐responsive phase transition behaviors of P(SBMA‐co‐DPA) copolymers at different pH buffer solution show pH‐dependent upper critical solution temperature (UCST) attributed to the influence of protonation/deprotonation of the pH‐responsive DPA segments. Through the delicate adjustment of the PSBMA/PDPA molar ratios, the stimuli‐responsive phase transition could be suitable for physiological environment. The kinetic drug release profiles demonstrate that P(SBMA‐co‐DPA) nanoparticles have the potential as oral delivery carriers due to their effective release of entrapped drugs in the stimulated intestinal fluid and preventing the deterioration of drug in stimulated gastric fluid.
Photo‐crosslinkable and amine‐containing block copolymer nanoparticles are synthesized via reversible addition–fragmentation chain transfer (RAFT) polymerization‐induced self‐assembly of a multifunctional core‐forming monomer, 2‐((3‐(4‐(diethylamino)phenyl)acryloyl)oxy)ethyl methacrylate (DEMA), using poly(2‐hydroxypropyl methacrylate) macromolecular chain transfer agent as a steric stabilizer in methanol at 65 °C. By tuning the chain length of PDEMA, a range of nanoparticle morphologies (sphere, worm, and vesicle) can be obtained. Since cinnamate groups can easily undergo a [2 + 2] cycloaddition of the carbon–carbon double bonds upon UV irradiation, the as‐prepared block copolymer nanoparticles are readily stabilized by photo‐crosslinking to produce anisotropic nanoparticles. The crosslinked block copolymer nanoparticles can be used as templates for in situ formation polymer/gold hybrid nanoparticles.
This paper describes a simple system for multi‐agent delivery. The system consists of a biodegradable polymer particle with a hollow interior, together with a hole on its surface that can be completely or partially sealed via thermal annealing. A hydrophobic dye, Nile‐red, entrapped within the shell of hollow particles presents a sustained release behavior while methylene blue, a hydrophilic model agent, encapsulated in the hollow interior shows a fast release manner. The release profiles of the probes can be further independently controlled by encapsulating methylene blue‐loaded polymer nanoparticles, instead of free dye, in the hollow particle with a small hole on its surface.
The directed self‐assembly of gold nanoparticles through the crystallization of surface‐grafted polyethylene oxide (PEO) in ethanol–water mixtures is described. This process is fully reversible and tunable through either the size of the core or the polymeric coating. Characterization by X‐ray scattering and electron microscopy of the self‐assembled structures reveals order at the nanoscale, typically not the case for thermoresponsive gold nanoparticles coated with lower or upper critical solution temperature polymers. A further novelty is the result of selective binding of calcium ions to the PEO in the fluid state: a reversible thermoresponsive transition become irreversible.
Spontaneous formation of polymer nanoparticles of well‐defined, <100 nm sizes with controlled solid/hollow morphology and fluorescent properties is reported. The nanoparticle formation is assisted by temperature‐triggered nucleation of an amphiphilic polymer—poly(N‐isopropylacrylamide) (PNIPAM)—and mediated by hydrogen bonding of the emerged nuclei with tannic acid (TA). The pH of solution and TA/PNIPAM ratios are explored as parameters that define TA/PNIPAM assembly. Well‐defined nanoparticles are formed in a wide range of neutral pH when the TA/PNIPAM ratio exceeds its critical, pH‐dependent value. Dynamic light scattering and zeta potential measurements as well as atomic force microscopy and electron energy loss spectroscopy indicate that solid nanoparticles or nanocapsules are formed depending on the solution pH and that enhanced ionization of TA favors hollow morphology. Nanocapsules exhibit label‐free fluorescence at neutral pH values and therefore can be useful in imaging applications.
The first polymer bearing exTTF units intended for the use in electrical charge storage is presented. The polymer undergoes a redox reaction involving two electrons at −0.20 V vs Fc/Fc+ and is applied as active cathode material in a Li‐organic battery. The received coin cells feature a theoretical capacity of 132 mAh g−1, a cell potential of 3.5 V, and a lifetime exceeding more than 250 cycles.
Living ethylene/1‐olefin copolymerization with multiple comonomer feeding stages allows the production of living block copolymers (LBCs) with well‐controlled microstructures. A dynamic Monte Carlo model is developed to simulate the production of LBCs in a semibatch reactor, and it is used to study how the polymer microstructure evolves during the polymerization. The model also describes how chain transfer reactions affect the microstructure of LBC blocks. These model predictions provide useful guidelines for producing LBCs with precisely designed microstructures.
A new approach is reported for the preparation of a graphene–epoxy flexible transparent capacitor obtained by graphene–polymer transfer and UV‐induced bonding. SU8 resin is employed for realizing a well‐adherent, transparent, and flexible supporting layer. The achieved transparent graphene/SU8 membrane presents two distinct surfaces: one homogeneous conductive surface containing a graphene layer and one dielectric surface typical of the epoxy polymer. Two graphene/SU8 layers are bonded together by using an epoxy photocurable formulation based on epoxy resin. The obtained material showed a stable and clear capacitive behavior.
In surface‐initiated atom transfer radical polymerization, knowledge of grafting density is of significant interest because it is one of the determining properties of grafted polymer. It is well known that not all of the immobilized initiators can grow into polymer chains. However, little is known about why this happens and what affects the grafting efficiency. The lack of information is partly due to the difficulty in experimental determination of grafting density on flat substrates. To circumvent the problem, Monte Carlo simulation with bond fluctuation model is used in this study to investigate the effects of various reaction conditions on the grafting density. The simulation results show lower grafting density when less deactivator is present. In systems with lower deactivator concentration, the number of monomer added per activation cycle is higher. Coupling this with close proximity of immobilized initiators results in chains initiated at earlier time to shield their neighboring initiator moieties from adding monomers, thus lowering the grafting density in such a system. These simulation results also provide an explanation to the seemingly conflicting trend reported in the literatures.
AB′ type monomers containing a thiolactone unit and vinyl ether moiety have been prepared with high yields. Aminolysis of the thiolactone moiety generates the corresponding thiol in situ, and upon UV‐irradiation, radical polyaddition occurs in the same medium, yielding linear poly(amide‐urethane)s with different side chain residues and (Poly(Ethylene Oxide)) PEO‐like backbone. Moreover, these unique polymers feature lower critical solution temperature behavior in water. Systematic modification of the responsive polymers reveals the influence of the variation of the side chains and the backbone structure on the corresponding solubility properties. In selected cases, multiresponsive polymers have been developed, which also respond to pH and metal concentration.
A versatile one‐pot strategy for the preparation of reversibly cross‐linked polymer‐coated mesoporous silica nanoparticles (MSNs) via surface reversible addition–fragmentation chain transfer (RAFT) polymerization is presented for the first time in this paper. The less reactive monomer oligo(ethylene glycol) acrylate (OEGA) and the more reactive cross‐linker N,N′‐cystaminebismethacrylamide (CBMA) are chosen to be copolymerized on the external surfaces of RAFT agent‐functionalized MSNs to form the cross‐linked polymer shells. Owing to the reversible cleavage and restoration of disulfide bonds via reduction/oxidation reactions, the polymer shells can control the on/off switching of the nanopores and regulate the drug loading and release. The redox‐responsive release of doxorubicin (DOX) from this drug carrier is realized. The protein adsorption, in vitro cytotoxicity assays, and endocytosis studies demonstrate that this biocompatible vehicle is a potential candidate for delivering drugs. It is expected that this versatile grafting strategy may help fabricate satisfying MSN‐based drug delivery systems for clinical application.
In this work, the structure of a strictly 2D dense polymer film for some model copolymer systems: diblock, triblock, and random copolymers is studied. An idealized model of these macromolecular systems is developed where positions of polymer beads are restricted to vertices of a simple cubic lattice and chains are under good solvent conditions (the excluded volume is the only interaction between beads of the chain and solvent molecules). The properties of the system are determined by means of Monte Carlo simulations with a sampling algorithm based on chain's local cooperative changes of conformation. Scaling of the chain size is studied and the influence of the polymer concentration on the chain's size and shape is discussed. The differences and similarities in the behavior of the percolation thresholds of one component in chains with different bead sequences are also shown and discussed. The percolation threshold is found to be weakly dependent on the chain length and more sensitive to the total polymer concentration.
The chemical control of cell division has attracted much attention in the areas of single cell‐based biology and high‐throughput screening platforms. A mussel‐inspired cytocompatible encapsulation method for achieving a “cell‐division control” with cross‐linked layer‐by‐layer (LbL) shells is developed. Catechol‐grafted polyethyleneimine and hyaluronic acid are chosen as polyelectrolytes for the LbL process, and the cross‐linking of polyelectrolytes is performed at pH 8.5. Cell division is controlled by the number of the LbL nanolayers and cross‐linking reaction. We also suggest a new measuring unit, , for quantifying “cell‐division timing” based on microbial growth kinetics.
The formation of redox‐active, totally organic nanoparticles in water is achieved following a strategy similar to that used to form metal nanoparticles. It is based on two fundamental concepts: i) complexation through aromatic–aromatic interactions of a water‐soluble precursor aromatic molecule with polyelectrolytes bearing complementary charged aromatic rings, and ii) reduction of the precursor molecule to achieve stabilized nanoparticles. Thus, formazan nanoparticles are synthesized by reduction of a tetrazolium salt with ascorbic acid using polyelectrolytes bearing benzene sulfonate residues of high linear aromatic density, but cannot be formed in the presence of nonaromatic polyelectrolytes. The red colored nanoparticles are efficiently encapsulated in calcium alginate beads, showing macroscopic homogeneity. Bleaching kinetics with chlorine show linear rates on the order of tenths of millimeters per minute. A linear behavior of the dependence of the rate of bleaching on the chlorine concentration is found, showing the potential of the nanoparticles for chlorine sensing.
This work describes the synthesis of π‐conjugated polymers possessing arylene and 1,3‐butadiene alternating units in the main chain by the reaction of α,β‐unsaturated ester/nitrile containing γ‐H with aromatic/heteroaromatic aldehyde compound. By using 4‐(4‐formylphenyl)‐2‐butylene acid ethyl ester as a model monomer, the different polymerization conditions, including catalyst, catalyst amount, and solvent, are optimized. The polymerization of 4‐(4‐formylphenyl)‐2‐butylene acid ethyl ester is carried out by refluxing in ethanol for 72 h with 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU) as a catalyst to give a 1,3‐butadiene‐containing π‐conjugated polymer, poly(phenylene‐1,3‐butadiene), in 84.3% yield with and / (PDI) estimated as 6172 and 1.65, respectively. Based on this new methodology, a series of π‐conjugated polymers containing 1,3‐butadiene units with different substituents are obtained in high yields. A possible mechanism is proposed for the polymerization through a six‐membered ring transition state and then a 1,5‐H shift intermediate.
This review describes different synthetic strategies towards sequence‐defined, monodisperse macromolecules, which are built up by iterative approaches and lead to linear non‐natural polymer structures. The review is divided in three parts: solution phase‐, solid phase‐, and fluorous‐ and polymer‐tethered approaches. Moreover, synthesis procedures leading to conjugated and non‐conjugated macromolecules are considered and discussed in the respective sections. A major focus in the evaluation is the applicability of the different approaches in polymer chemistry. In this context, simple procedures for monomer and oligomer synthesis, overall yields, scalability, purity of the oligomers, and the achievable level of control (side‐chains, backbone, stereochemistry) are important benchmarks.
