The Synthesis and Mechanistic Considerations of a Series of Ammonium Monosubstituted H-Phosphonate Salts

A series of ammonium monosubstituted H-phosphonate salts were synthesized by combining H-phosphonate diesters with amines in the absence of solvent at 80 °C. Variation of the ester substituent and amine produced a range of ionic liquids with low melting points. The products and by-products were analyzed by spectroscopic and spectrometric techniques in order to get a better mechanistic picture of the dealkylation and formal dearylation observed. For dialkyl H-phosphonate diesters, (RO)₂P(O)H (R=alkyl), the reaction proceeds via direct dealkylation with the reactivity increasing in the order R=iPr<Et<Me corresponding to DFT calculated activation enthalpies of 22.6, 20.8, and 17.9 kcal mol⁻¹. For the diphenyl H-phosphonate diesters, (PhO)₂P(O)H, the dearylation was found to proceed via phenol-assisted formation of a 5-coordinate intermediate, (PhO)₃PH(OH), from which P(OPh)₃ and water were eliminated. The presence of an equivalent of water then facilitated the formation of P(OH)₂OPh and the amine, R'NH₂, subsequently abstracted a proton from it to yield [(PhO)PH(O)O]^-[R'NH₃]⁺.     

Synthesis of perfluoro(polyether) difunctional compounds

Omega-iodoperfluoro(polyether) esters IR_fOR_fCO₂R have been synthesized by two procedures. These iodoesters have been reacted via zinc coupling reactions to yield alpha, omega-perfluoro(polyether) diesters. The diesters serve as convenient starting materials for the synthesis of a variety of other difunctional compounds of high molecular weight and exhibiting a variation of oxygen-carbon ratio.     

Efficient Routes to Racemic and Enantiomerically Pure (S)-BINOL Diesters

A systematic study for esterification procedures to the synthesis of BINOL diesters is described. Reaction conditions with trifluoracetic acid anhydride (TFAA) and 85% H₃PO₄ were selected as the best procedure to prepare enantiomerically pure (S)-1,1′-bi-2-naphthol (BINOL) diesters VIII to XI with almost quantitative yields and very short reaction times.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications^® for the following free supplemental resources: Full experimental and spectral details.]     

Internal plasticization of poly(vinyl) chloride using glutamic acid as a branched linker to incorporate four plasticizers per anchor point

Internal plasticization of polyvinyl chloride (PVC) using thermal azide‐alkyne Huisgen dipolar cycloaddition between azidized PVC and electron‐poor acetylenediamides incorporating a branched glutamic acid linker resulted in incorporation of four plasticizing moieties per attachment point on the polymer chain. A systematic study incorporating either alkyl or polyethylene glycol esters provided materials with varying degrees of plasticization, with depressed T_g values ranging from ?1 °C to 62 °C. Three interesting trends were observed. First, T_g values of PVC bearing various internal plasticizers were shown to decrease with increasing chain length of the plasticizing ester. Second, branched internal plasticizers bearing triethylene glycol chains had lower T_g values compared to those with similar length long‐chain alkyl groups. Finally, thermogravimetric analysis of these internally plasticized PVC samples revealed that these branched internal plasticizers bearing alkyl chains are more thermally stable than similarity branched plasticizers bearing triethylene glycol units. These internal tetra‐plasticizers were synthesized and attached to PVC‐azide in three simple synthetic steps. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1821–1835     

Synthesis of gluco-Configured Tetrahydroimidazopyridine-2phosphonate-Derived Lipids,Potential Glucosyl Transferase Inhibitors

The analogues 1 – 3 of dolichol monophosphatidyl β-D -glucose have been prepared as potential inhibitors of the glucosyl transferase Alg10p. Pd(PPh₃)₄-catalysed phosphonylation of the iodoimidazole 4 with diethyl, dimethyl, and diphenyl phosphite led to the corresponding phosphonic acid diesters, which were transformed into deprotected and silyl-protected diesters, deprotected monoesters, and protected and unprotected phosphonic acids (Scheme). A N-methyl imidazolium salt was obtained as a by-product of the dimethyl-phosphonylation of the iodoimidazole, and prepared in high yields by methylation of the imidazole 8 with MeI; the corresponding deprotected salt 11 inhibits sweet almond β-glucosidases (IC₅₀=308 μM ). Trichloroacetonitrile-promoted monoesterification of the acetylated mono-triethylammonium salt 19 with oleyl alcohol, phytanol, and dolichol-19, followed by deacetylation, gave the desired glycophospholipids.     

Diacidic ionic liquid supported on magnetic-silica nanocomposite: a novel,stable, and reusable catalyst for selective diester production

Abstract

Supported diacidic ionic liquid on magnetic silica nanoparticles (SDAIL@magnetic nanoSiO₂) was successfully prepared through a multi-step approach. 2,2- bis ((3- methylimidazolidin-1-yl) methyl) propane- 1,3- diol bromide salt was immobilized onto the surface of magnetic silica nanoparticles via covalent bonding to prepare a novel powerful acidic catalyst. The synthesized catalyst was characterized by FT-IR, SEM, TGA, VSM, N₂ adsorption–desorption measurements and acid-base titration. The catalytic activity of the prepared SDAIL@magnetic nanoSiO₂ was investigated for the selective diesterification of alcohols by phthalic anhydride to afford corresponding dialkyl plasticizers under solvent-free conditions. The nature of two acidic counter anions as well as the presence of Lewis acidic species (Fe₃O₄) on the magnetic nanosilica and high surface area of the nanosilica influenced the behavior of the catalyst. Surperisingly, the high acidic character of the catalyst facilitates the reaction with a short reaction time. Furthermore, TG analysis strongly demonstrates that major content of IL is still stable on the support up to 290 °C, so catalyst has a good thermal stability. Under the optimized conditions, the conversion of phthalic anhydride was 100% and diester plasticizers were obtained with excellent yields (80–100%). The SDAIL@magnetic nanoSiO₂ catalyst showed a good reusability and could be easily separated from the reaction mixture using an external magnet thanks to its superparamagnetic behavior and reused for several runs without significant activity loss. An important advantage of the SDAIL@magnetic nanoSiO₂ was its high-hydrophilicity resulted in excellent selectivity towards the formation of only diesters which are commonly used plasticizers in different industries.Graphical abstract

Open image in new window

     

The Simple Synthesis of Chiral Polyazaoxacoronands Derived from α-Amino Acids

Abstract

Bisamidation of oxaloyl chloride using L-amino acid methyl ester hydrochlorides afforded chiral diesters. The following reactions of diesters with 2,2-(ethylene-dioxy)diethylamine, afforded tetramides possessing C₂ symmetry. Coupling of N-hydroxysuccinimide ester of N-benzyloxycarbonyl-L-alanine with 1,5-diamino-3-oxapentane, followed by cleavage of protecting groups, afforded an optically active diamine, which was transformed consequently into tetramide via the reaction with diglycolic acid dimethyl ester under high pressure conditions.     

Compatibility of cross-linked polymers with plasticizers by glass transition temperature measurement and swelling tests

To elucidate the compatibility of polymer and plasticizer components of binders a study of polymer–plasticizer interactions by differential scanning calorimetry (DSC) and swelling tests was conducted. The glass transition temperatures (T_g's) of mixtures of polymers and plasticizers, both cured and uncured, were determined with a DSC technique. Results with the PEG polymer systems were complicated by the partial crystallization of the polymer from the polymer/plasticizer mixtures. The PGA polymer system did not exhibit this behavior. However, the T_g's of cured PGA with various plasticizer mixtures made complicated departures from linearity (plots of T_g versus weight fraction of plasticizer) that indicated polymer–plasticizer interaction. By using least-squares analysis of data plotted by the equation Values of the interaction parameter K were determined for cured PGA in various plasticizer systems. These K values are in good agreement with the molecular flexibility of the plasticizers based on their molecular structure. The results of swelling tests are discussed to elucidate further the nature of the interaction of these polymers with plasticizers. Calculated polymer-plasticizer interaction values (χ) from the swelling tests correlated with the solubility parameter (δ) for a given class of polymer (polyether, polyester) and plasticizer (nitrate ester, ether-type). The efficiency of a plasticizer in reducing the T_g of a polymer (below the linearly interpolated value) was found not to be related to the swelling behavior of the polymer in the plasticizer.     

Straightforward Synthesis of 1,2-Amino Phosphate Diesters and Application to the Synthesis of Novel 1,2-Amino Ether Diesters

A variety of 1,2-amino alcohol diesters 1 reacted smoothly with diethyl chlorophosphate under basic conditions to afford the corresponding 1,2-amino phosphate diesters 2 in excellent yields. These compounds served as useful precursors for subsequent nucleophilic attack by alcohols in an S_N2 fashion to provide 1,2-amino ether diesters 3.     

An efficient hydrocyanation of α, β-unsaturated diesters with TMSCN catalyzed by MgI2 etherate

Abstract

A mild, efficient and highly regioselective addition of trimethylsilyl cyanide (TMSCN) to α,β-unsaturated diesters has been achieved by using MgI₂ etherate as catalyst under solvent-free conditions. This protocol provides the corresponding β-cyano esters in high yields.     

Stereospecific 1,3‐Aminobromination of Donor–Acceptor Cyclopropanes

Sn(OTf)₂‐catalyzed 1,3‐aminobromination of donor–acceptor cyclopropanes with various sulfonyl amides or electron‐poor anilines and N ‐bromosuccinimide is reported. These experimentally straightforward reactions occurred with complete regio‐ and stereospecificity (for anilines) to give γ‐aminated α‐brominated malonic diesters in good to excellent yields (up to 98 %). These compounds served as valuable substrates for subsequent reactions to provide substituted azetidines and γ‐lactams in high yields.     

Development and characterization of plasticized polyamides by fluid and solid plasticizers

Polyamides are semicrystalline polymers that are useful in a wide range of applications in the plastics industry. Some applications require higher flexibility and improved workability of polyamides; thus, a plasticization approach that eases compounding and processing procedures and produces better desired product properties can be utilized. Common plasticizers are high‐boiling liquid esters, but solid plasticizers also have been considered. The present research has focused on plasticization of nylon 66/6 (80/20) copolymer by using selected low molecular weight organic materials. Plasticization of the copolyamide was studied with glycerin mono stearate, benzene sulfonamide, and methyl 4‐hydroxybenzoate as the solid plasticizers and diethylhexyl phthalate as the liquid plasticizer. The materials were prepared and characterized by thermal, mechanical, dynamic, rheological, and morphological properties. The experimental results were supported by simulated polymer and plasticizer interactions using molecular dynamic simulations. Plasticization and antiplasticization phenomena were observed and discussed. The plasticizers were classified by their efficiency in reducing T_g and by modification of the other polyamide properties. Copyright © 2011 John Wiley & Sons, Ltd.     

Nonmigratory internal plasticization of poly(vinyl chloride) via pendant triazoles bearing alkyl or polyether esters

Branched and linear nonmigratory internal plasticizers attached to PVC by a pendant triazole linkage were synthesized and investigated. Copper-free azide-alkyne thermal cycloaddition was employed to covalently bind triazole-based phthalate mimics to PVC. To systematically investigate the effect of plasticizer structure on glass transition temperature, several architectural motifs were explored. Free volume theory was considered when designing many of these internal plasticizers: hexyl-tethers were utilized to generate additional space between the triazole-phthalate mimic and the polymer backbone. Miscibility of these triazole-plasticizers in PVC is important: variation of the ester moieties on the triazole possessing alkyl and/or poly(ethylene oxide) chains produced a wide range of glass transition temperatures (T_g): from anti-plasticizing 96 °C, to highly efficient plasticized materials exhibiting T_g values as low as −42 °C. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2397–2411     

TG/DSC/FTIR characterization of linear geranyl diesters

The synthesis, thermal behavior, and characterization of the decomposition products of linear geranyl diesters: digeranyl succinate, digeranyl glutarate, digeranyl adipinate, and digeranyl sebacinate were presented. The linear geranyl diesters were prepared in direct esterification process of a molar stoichiometric ratio of geraniol and suitable acidic reagent in solvent-free medium at 130 °C using butylstannoic acid as a catalyst. Their structure was confirmed based on FTIR, ¹H- and ¹³C-NMR spectra. It was proved that the use of tin catalyst allowed decreasing the reaction time and increasing the final conversion of substrates when compared to non-catalyzed process. It considerably simplifies the processing by reduction of the preparation cost and thus this new method of synthesis of aroma diesters may be attractive for practical applications. The thermal behavior of prepared compounds was studied by TG/DSC/FTIR coupled method. TG analysis showed that diesters are thermally stable up to temperatures above 200 °C. The DTG curves confirmed that these decomposition run as a single-stage process. The T _max1 were in the range of 294.5–313.8 °C depending on the aliphatic chain length (–CH₂–)_n in the structure of aroma diesters, which was in accordance with DSC data. The analysis of the gases evolved during heating of diesters in inert atmosphere indicated on the asymmetrical disrupt of their bonds. The cleavage of ester bond and O-geranyl bond was expected. It resulted in production of the mixture of derivatives of geraniol (acyclic and alicyclic monoterpene hydrocarbons) like myrcene, ocimene, or limonene as main decomposition products. In addition, the formation of anhydride, lactone, or ketone functionalities among the degradation products clearly confirmed the proposed degradation path of studied diesters.     

Favoured conformations of methyl isopropyl,ethyl isopropyl,methyl tert‐butyl,and ethyl tert‐butyl 2‐(triphenylphosphoranylidene)malonate

The conformations of organic compounds determined in the solid state are important because they can be compared with those in solution and/or from theoretical calculations. In this work, the crystal and molecular structures of four closely related diesters, namely methyl isopropyl 2‐(triphenylphosphoranylidene)malonate, C₂₅H₂₅O₄P, ethyl isopropyl 2‐(triphenylphosphoranylidene)malonate, C₂₆H₂₇O₄P, methyl tert‐butyl 2‐(triphenylphosphoranylidene)malonate, C₂₆H₂₇O₄P, and ethyl tert‐butyl 2‐(triphenylphosphoranylidene)malonate, C₂₇H₂₉O₄P, have been analysed as a preliminary step for such comparative studies. As a result of extensive electronic delocalization, as well as intra‐ and intermolecular interactions, a remarkably similar pattern of preferred conformations in the crystal structures results, viz. a syn–anti conformation of the acyl groups with respect to the P atom, with the bulkier alkoxy groups oriented towards the P atom. The crystal structures are controlled by nonconventional hydrogen‐bonding and intramolecular interactions between cationoid P and acyl and alkoxy O atoms in syn positions.     

Effect of benzenesulfonamide plasticizers on the glass‐transition temperature of semicrystalline polydodecamide

The effect of various benzenesulfonamide (BSA) plasticizers on the amorphous phase of semicrystalline polydodecamide (PA‐12) has been investigated. MonoBSAs appear as efficient glass‐transition temperature (T_g) depressors because of their miscibility with the host polyamide (PA), low glass transition, and small molecule size. PA‐12's T_g shifts from 50 to about 0 °C at 20 mol % of the most efficient molecules. Comparatively, the more bulky bisBSAs appear to induce less important absolute T_g decreases (30 K at 20 mol %), although these appear as more important when considering the polymer T_g to plasticizer T_g difference. This unexpected observation could be ascribed to both the amide‐sulfonamide interactions and the sterically generated disorder within the polyamide because of the plasticizer molecule's size. Phase‐separation behavior of BSA plasticizers within the host PA has also been investigated. Crystalline phenyl‐SO₂NH₂, for instance, dephased beyond 20 mol % in PA‐12, forming distinct 1–2 micrometer wide crystalline domains as a result of its high propensity to crystallize upon cooling from the melt. By contrast, slow crystallizing N,N‐dimethylBSA, which lacks any specific interaction for PA‐12, remained nevertheless dispersed at a molecular level (metastable state, no phase separation) when vitrification of the host PA‐12 amorphous phase occurred on cooling. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2208–2218, 2002     

Manganese‐Mediated Intermolecular Arylation of H‐Phosphinates and Related Compounds

The intermolecular radical functionalization of arenes with aryl and alkyl H‐phosphinate esters, as well as diphenylphosphine oxide and H‐phosphonate diesters, is described. The novel catalytic Mn^II/excess Mn^IV system is a convenient and inexpensive solution to directly convert C_sp2?H into C?P bonds. The reaction can be employed to functionalize P‐stereogenic H‐phosphinates since it is stereospecific. With monosubstituted aromatics, the selectivity for para‐substitution increases in the order (RO)₂P(O)H<R¹P(O)(OR)H<Ph₂P(O)H, a trend that may be explained by steric effects.     

Mechanically Stable Hydrophilic Films Based on Oxialkylated Macromers Polymerizable by UV Irradiation

The preparation and characterization of films based on ethoxylated and acrylated triethanolamine or ϵ-aminecaprolactam or acrylated block copolymer of ethylene oxide (EO) and propylene oxide (PO) are described. Chemical characterization of films and migration of the plasticizers through the films were monitored with electron spectroscopy for chemical analysis. The (EO)_x(PO)_y(EO)_x–3A film was shown to be unique in the sense that it efficiently prevents migration of hydrophobic species. © 1997 John Wiley & Sons, Ltd.     

Synthesis of diesters by addition of saturated carboxylic acids to tricyclodecenyl formate

Reaction of addition of C₁-C₅-saturated monobasic acids to tricyclo[5.2.1.0^2.6]dec-3-en-8(9)-yl for-mate in the presence of a catalyst, boron trifluoride etherate (BF₃·OEt₂), was used to synthesize homo- and mixed tricyclo[5.2.1.0^2.6]decane-3(4),8(9)-diol diesters. The synthesized formic-acetic and formic-propionic acid diesters have a pleasant odor and can be used as components for preparation of perfume formulations.     

Acid–base complexes of polymers

The physical interactions of polymers with neighboring molecules are determined by only two kinds of interactions: London dispersion forces and Lewis acid–base interactions. These two kinds of attractive energies (together with certain steric restrictions) determine solubility, solvent retention, plasticizer action, wettability, adsorption, adhesion, reinforcement, crystallinity, and mechanical properties. The London dispersion force interaction energies of polymers have been quantified by the dispersion force contribution to cohesive energy density (δ²_d) and the dispersion force contribution to surface energy (δ^d). The Lewis acid–base interactions, often referred to as “polar” interactions, can be best quantified by Drago's C_A and E_A constants for acid sites and C_B and E_B constants for basic sites. In this article infrared spectral shifts are featured as a method of determining enthalpies of acid–base interaction, and the C and E constants for polymers, plasticizers, and solvents. Examples are given where acid–base complexation of polymers with solvents dominate solubility and swelling phenomena. Enthalpies of acid–base complexation in polymer blends are determined from spectral shifts.