Water‐soluble triply‐responsive homopolymers of N,N‐dimethylaminoethyl methacrylate with a terminal azobenzene moiety

Novel water‐soluble triply‐responsive homopolymers of N,N‐dimethylaminoethyl methacrylate (DMAEMA) containing an azobenzene moiety as the terminal group were synthesized by atom transfer radical polymerization (ATRP) technique. The ATRP process of DMAEMA was initiated by an azobenzene derivative substituted with a 2‐bromoisobutyryl group (Azo‐Br) in the presence of CuCl/Me₆TREN in 1,4‐dioxane as a catalyst system. The molecular weights and their polydispersities of the resulting homopolymers (Azo‐PDMAEMA) were characterized by gel permeation chromatography (GPC). The homopolymers are soluble in aqueous solution and exhibit a lower critical solution temperature (LCST) that alternated reversibly in response to Ph and photoisomerization of the terminal azobenzene moiety. It was found that the LCST increased as pH decreased in the range of testing. Under UV light irradiation, the trans‐to‐cis photoisomerization of the azobenzene moiety resulted in a higher LCST, whereas it recovered under visible light irradiation. This kind of polymers should be particularly interesting for a variety of potential applications in some promising areas, such as drug controlled‐releasing carriers and intelligent materials because of the multistimuli responsive property. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2564–2570, 2010     

Polymers derived from N‐isopropylacrylamide and azobenzene‐containing acrylamides: Photoresponsive affinity to water

N‐Isopropylacryamide was copolymerized by free‐radical polymerization with N‐[2‐(4‐phenylazophenoxy)ethyl]acrylamide derivatives that were substituted at their 4′‐position with ethoxy, methoxyethoxy, or isopropyl units, or with N‐{2‐[4‐(pyridin‐2‐ylazo)phenoxy]ethyl}acrylamide. The polymers were soluble in cold water and possessed lower critical solution temperatures (LCSTs). The value of the LCST rose a few degrees after UV irradiation and dropped after irradiation with visible light, reversibly, in processes that corresponded to the isomerization of the azobenzene units. The polymers became increasingly hydrophobic after increasing their azobenzene content. The difference of hydrophobicity correlates with the absorption band height at about 400 nm. The structure of the substituent on the azobenzene unit affected both the transition temperature and the hydrophobicity. A change in photoinduced wettability for water was observed to occur on a prepared film at a temperature different from the LCST determined in water. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5200–5214, 2004     

Synthesis and characterization of 4‐arm star side‐chain liquid crystalline polymers containing azobenzene with different terminal substituents via ATRP

4‐Arm star side‐chain liquid crystalline (LC) polymers containing azobenzene with different terminal substituents were synthesized by atom transfer radical polymerization (ATRP). Tetrafunctional initiator prepared by the esterification between pentaerythritol and 2‐bromoisobutyryl bromide was utilized to initiate the polymerization of 6‐[4‐(4‐methoxyphenylazo)phenoxy]hexyl methacrylate (MMAzo) and 6‐[4‐(4‐ethoxyphenylazo)phenoxy]hexyl methacrylate (EMAzo), respectively. The 4‐arm star side‐chain LC polymer with p‐methoxyazobenzene moieties exhibits a smectic and a nematic phase, while that with p‐ethoxyazobenzene moieties shows only a nematic phase, which derives of different terminal substituents. The star polymers have similar LC behavior to the corresponding linear homopolymers, whereas transition temperatures decrease slightly. Both star polymers show photoresponsive isomerization under the irradiation with UV–vis light. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3342–3348, 2007     

Doubly photoresponsive and water‐soluble block copolymers: Synthesis and thermosensitivity

We report the synthesis and investigation of a new type of photoresponsive block copolymers (BCPs). They were designed to comprise two water‐soluble polymers containing two different photoisomerizable moieties (either azobenzene and spiropyran or two different azobenzenes), with the two constituting blocks that, when separated, exhibit a lower critical solution temperature (LCST) in water and can shift their LCST in opposite directions upon photoisomerization (decrease of LCST for one polymer and increase for the other). A variety of such doubly photoresponsive BCPs were synthesized using either azobenzene‐ or spiropyran‐containing poly(N,N‐dimethylacrylamide) (PDMA), poly(N‐isopropylacrylamide) (PNIPAM) and poly[methoxydi(ethylene glycol) methacrylate] (PDEGMMA). Their thermal phase transition behaviors in aqueous solution before and after simultaneous photoreactions on the two blocks were investigated in comparison with their constituting blocks, by means of solution transmittance (turbidity) and variable‐temperature ¹H NMR measurements. The results show that BCPs displayed a single LCST whose shift upon two photoisomerizations appeared to be determined by the competing and opposing photoinduced effects on the two blocks. Moreover, optically controlling the relative photoisomerization degrees of trans azobenzene‐to‐cis azobenzene and spiropyran‐to‐merocyanine could be used to tune the LCST of BCP solution. This study demonstrates the potential of exploring a more complex photoreaction scheme to optically control the solution properties of water‐soluble thermosensitive BCPs. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4055–4066, 2010     

Behaviors of self‐assembled diblock copolymer with pendant photosensitive azobenzene segments

A novel monomer, ethyl 4‐[4‐(11‐methacryloyloxyundecyloxy)phenyl azobenzoyl‐oxyl] benzoate, containing a photoisomerizable N?N group was synthesized. The monomer was further diblock copolymerized with methyl methacrylate. Amphiphilic diblock copolymer poly(methyl methacrylate‐block‐ethyl 4‐[4‐(11‐methacryloyloxyundecyloxy)phenyl azobenzoyl‐oxyl] benzoate ( PMMA ‐ b ‐ PAzoMA ) was synthesized using atom transfer radical polymerization. The reverse micelles with spherical construction were obtained with 2 wt % of the diblock copolymer in a THF/H₂O mixture of 1:2. Under alternating UV and visible light illumination, reversible changes in micellar structure between sphere and rod‐like particles took place as a result of the reversible E‐Z photoisomerization of azobenzene segments in PMMA ‐ b ‐ PAzoMA . Microphase separation of the amphiphilic diblock copolymer in thin films was achieved through thermal and solvent aligning methods. The microphases of the annealed thin films were investigated using atom force microscopy topology and scanning electron microscopy analyses. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1142–1148, 2010     

Design and proof of reversible micelle‐to‐vesicle multistimuli‐responsive morphological regulations

Multistimuli‐responsive precise morphological control over self‐assembled polymers is of great importance for applications in nanoscience as drug delivery system. A novel pH, photoresponsive, and cyclodextrin‐responsive block copolymer were developed to investigate the reversible morphological transition from micelles to vesicles. The azobenzene‐containing block copolymer poly(ethylene oxide)‐b‐poly(2‐(diethylamino)ethyl methacrylate‐co‐6‐(4‐phenylazo phenoxy)hexyl methacrylate) [PEO‐b‐P(DEAEMA‐co‐PPHMA)] was synthesized by atom transfer radical polymerization. This system can self‐assemble into vesicles in aqueous solution at pH 8. On adjusting the solution pH to 3, there was a transition from vesicles to micelles. The same behavior, that is, transition from vesicles to micelles was also realizable on addition of β‐cyclodextrin (β‐CD) to the PEO‐b‐P(DEAEMA‐co‐PPHMA) solution at pH 8. Furthermore, after β‐CD was added, alternating irradiation of the solution with UV and visible light can also induce the reversible micelle‐to‐vesicle transition because of the photoinduced trans‐to‐cis isomerization of azobenzene units. The multistimuli‐responsive precise morphological changes were studied by laser light scattering, transmission electron microscopy, and UV–vis spectra. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Temperature/Light Dual‐Responsive Inclusion Complexes of α‐Cyclodextrins and Azobenzene‐Containing Polymers

Three kinds of photoresponsive copolymers with azobenzene side chains were synthesized by radical polymerization of N‐4‐phenylazophenylacrylamide (PAPA) with N‐isopropylacrylamide (NIPAM), N,N‐diethylacrylamide (DEAM) or N,N‐dimethylacrylamide (DMAM) respectively. Their structures were characterized by FT‐IR, ¹H‐NMR and UV/Vis spectroscopy. Their reversible photoresponses were studied with or without α‐cyclodextrin (α‐CD), which showed that both the copolymers and their inclusion complexes with α‐CD underwent rapid photoisomerization. The lower critical solution temperature (LCST) of the copolymers and their inclusion complexes with α‐CD were investigated by cloud point measurement, which showed that the LCST of three kinds of copolymers increased largely after adding α‐CD. After UV irradiation on the solutions of copolymers and their inclusion complexes, the LCST of the copolymers increased slightly with the absence of α‐CD, while decreased largely with the presence of α‐CD. Furthermore, the LCST reverted to its originality after visible light irradiation. This change of LCST could be reversibly controlled by UV and visible light irradiation alternately. In particular, in the copolymer of PAPA and DMAM, the reversible water solubility of the inclusion complexes could be triggered by alternating UV and visible light irradiation.     

Control of the Orientation and Photoinduced Phase Transitions of Macrocyclic Azobenzene

Photoinduced phase transitions caused by photochromic reactions bring about a change in the state of matter at constant temperature. Herein, we report the photoinduced phase transitions of crystals of a photoresponsive macrocyclic compound bearing two azobenzene groups ( 1 ) at room temperature on irradiation with UV (365 nm) and visible (436 nm) light. The trans/trans isomer undergoes photoinduced phase transitions (crystal–isotropic phase–crystal) on UV light irradiation. The photochemically generated crystal exhibited reversible phase transitions between the crystal and the mesophase on UV and visible light irradiation. The molecular order of the randomly oriented crystals could be increased by irradiating with linearly polarized visible light, and the value of the order parameter was determined to be ?0.84. Heating enhances the thermal cis‐to‐trans isomerization and subsequent cooling returned crystals of the trans/trans isomer.     

Photoliquefiable Ionic Crystals: A Phase Crossover Approach for Photon Energy Storage Materials with Functional Multiplicity

Ionic crystals (ICs) of the azobenzene derivatives show photoinduced IC–ionic liquid (IL) phase transition (photoliquefaction) upon UV‐irradiation, and the resulting cis‐azobenzene ILs are reversibly photocrystallized by illumination with visible light. The photoliquefaction of ICs is accompanied by a significant increase in ionic conductivity at ambient temperature. The photoliquefaction also brings the azobenzene ICs further significance as photon energy storage materials. The cis‐IL shows thermally induced crystallization to the trans‐IC phase. This transition is accompanied by exothermic peaks with a total ΔH of 97.1 kJ mol^?1, which is almost double the conformational energy stored in cis‐azobenzene chromophores. Thus, the integration of photoresponsive ILs and self‐assembly pushes the limit of solar thermal batteries.     

Controlled Sol–Gel Transitions of a Thermoresponsive Polymer in a Photoswitchable Azobenzene Ionic Liquid as a Molecular Trigger

Producing ionic liquids (ILs) that function as molecular trigger for macroscopic change is a challenging issue. Photoisomerization of an azobenzene IL at the molecular level evokes a macroscopic response (light‐controlled mechanical sol–gel transitions) for ABA triblock copolymer solutions. The A endblocks, poly(2‐phenylethyl methacrylate), show a lower critical solution temperature in the IL mixture containing azobenzene, while the B midblock, poly(methyl methacrylate), is compatible with the mixture. In a concentrated polymer solution, different gelation temperatures were observed in it under dark and UV conditions. Light‐controlled sol–gel transitions were achieved by a photoresponsive solubility change of the A endblocks upon photoisomerization of the azobenzene IL. Therefore, an azobenzene IL as a molecular switch can tune the self‐assembly of a thermoresponsive polymer, leading to macroscopic light‐controlled sol–gel transitions.     

Azobenzene‐containing LC polymethacrylates highly photosensitive in broad spectral range

Two photosensitive chiral liquid crystalline azobenzene‐containing polymethacrylates having different length of flexible spacer connecting chromophores with backbone were synthesized and their phase behavior and photo‐optical properties were studied. Both polymers consist of lateral methyl substituents in ortho‐position of azobenzene chromophores providing high photosensitivity even in red spectral region as well as high thermal stability of photoinduced Z‐form of azobenzene chromophores. It is shown, that smectic phase (SmA*) formation in films of polymer with longer spacer predetermines its quite unusual spectral response to UV and subsequent visible light actions. The SmA* phase promotes spontaneous homeotropic alignment of azobenzene chromophores in polymer films. UV‐irradiation induces not only E‐Z isomerization but also results in disruption of homeotropic alignment, whereas subsequent visible light action enables to obtain films with the low degree of chromophores orientation. The photo‐orientation phenomena under the action of polarized light of different wavelength on polymer films were studied. The possibility of using red polarized light of moderate intensity for optical photorecording on polymer films is demonstrated. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2962–2970     

Phase behavior of tetramethylpolycarbonate blends with styrene‐based methacrylate copolymers and their interaction energies

The miscibility of tetramethylpolycarbonate (TMPC) blends with styrenic copolymers containing various methacrylates was examined, and the interaction energies between TMPC and methacrylate were evaluated from the phase‐separation temperatures of TMPC/copolymer blends with lattice‐fluid theory combined with a binary interaction model. TMPC formed miscible blends with styrenic copolymers containing less than a certain amount of methacrylate, and these miscible blends always exhibited lower critical solution temperature (LCST)‐type phase behavior. The phase‐separation temperatures of TMPC blends with copolymers such as poly(styrene‐co‐methyl methacrylate), poly(styrene‐co‐ethyl methacrylate), poly(styrene‐co‐n‐propyl methacrylate), and poly(styrene‐co‐phenyl methacrylate) increase with methacrylate content, go through a maximum, and decrease, whereas those of TMPC blends with poly(styrene‐co‐n‐butyl methacrylate) and poly(styrene‐co‐cyclohexyl methacrylate) always decrease. The calculated interaction energy for a copolymer–TMPC pair is negative and increases with the methacrylate content in the copolymer. This would seem to contradict the prediction of the binary interaction model, that systems with more favorable energetic interactions have higher LCSTs. A detailed inspection of lattice‐fluid theory was performed to explain such phase behavior. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1288–1297, 2002     

Synthesis and photoresponsive behavior of azobenzene‐containing side‐chain liquid crystalline diblock polymers with polypeptide block

Well‐defined azobenzene‐containing side‐chain liquid crystalline diblock copolymers composed of poly[6‐(4‐methoxy‐azobenzene‐4′‐oxy) hexyl methacrylate] (PMMAZO) and poly(γ‐benzyl‐L ‐glutamate) (PBLG) were synthesized by click reaction from alkyne‐ and azide‐functionalized homopolymers. The alkyne‐terminated PMMAZO homopolymers were synthesized by copper‐mediated atom transfer radical polymerization with a bromine‐containing alkyne bifunctional initiator, and the azido‐terminated PBLG homopolymers were synthesized by ring‐opening polymerization of γ‐benzyl‐L ‐glutamate‐N‐carboxyanhydride in DMF at room temperature using an amine‐containing azide initiator. The thermotropic phase behavior of PMMAZO‐b‐PBLG diblock copolymers in bulk were investigated using differential scanning calorimetry and polarized light microscopy. The PMMAZO‐b‐PBLG diblock copolymers exhibited a smectic phase and a nematic phase when the weight fraction of PMMAZO block was more than 50%. Photoisomerization behavior of PMMAZO‐b‐PBLG diblock copolymers and the corresponding PMMAZO homopolymers in solid film and in solution were investigated using UV–vis. In solution, trans–cis isomerization of diblock copolymers was slower than that of the corresponding PMMAZO homopolymers. These results may provide guidelines for the design of effective photoresponsive anisotropic materials. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Photoresponsive and fluorescence behaviors of azobenzene‐containing amphiphilic block copolymers

The effects of solvency and mole fraction of azobenzene moieties (f_PAzoMA) on the photoresponsive and fluorescence behaviors of poly(acrylic acid)‐block‐poly(6‐[4‐(4′‐methoxyphenylazo)phenoxy]hexyl methacrylate) (PAA‐PAzoMA) amphiphilic diblock copolymers were investigated using UV–vis spectroscopy and fluorescence spectroscopy. The photoresponsive behavior depended strongly on the solvency and f_PAzoMA. When dissolved in a PAA‐selective solvent, PAA‐PAzoMA formed micelles with PAzoMA in the micelle core. The confinement of azobenzene moieties caused a steric hindrance, thereby markedly reducing the kinetics of photoisomerization compared with that of the unconfined PAA‐PAzoMA in a nonselective solvent. Additionally, PAA‐PAzoMA dissolved in the PAA‐selective solvent caused a blue shift of the maximum absorbance, suggesting the formation of H‐aggregates of azobenzene mesogens. The high H‐aggregate content substantially reduced the fluorescence emission. Consequently, the fluorescence emission of PAA‐PAzoMA in the nonselective solvent was more intense than that in the PAA‐selective solvent. Upon UV irradiation, the enhanced bent‐shaped cis isomers disturbed the compact packing of azobenzene mesogens, which substantially enhanced the fluorescence emission. Both the photoisomerization rate and fluorescence emission decreased with an increase in f_PAzoMA. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 793–803     

Thermosensitive polymer brush‐supported 4‐N,N‐dialkylaminopyridine on silica particles as catalyst for hydrolysis of an activated ester in aqueous buffers: Comparison of activity with linear polymer‐supported version and effect of LCST transition

We report on the synthesis of a thermosensitive polymer brush‐supported 4‐N,N‐dialkylaminopyridine catalyst and the comparison of its catalytic activity with the corresponding linear polymer‐supported version in the hydrolysis of p‐nitrophenyl acetate (NPA) as well as the effect of lower critical solution temperature (LCST) transition on catalytic activity. The polymer brushes were synthesized from initiator‐functionalized silica particles by surface‐initiated atom transfer radical polymerization of methoxytri(ethylene glycol) methacrylate and 2‐(N‐methyl‐N‐(4‐pyridyl)amino)ethyl methacrylate in the presence of a free initiator. Dynamic light scattering studies showed that the onset temperatures of the LCST transition of polymer brushes in pH 7.52 and 7.82 buffers were 42 and 38 °C, respectively. Under the same reaction conditions, the net initial rate of the hydrolysis of NPA catalyzed by hairy particles was 70–80% of that catalyzed by the free copolymer at the temperature below the LCST of polymer brushes. With further increasing the temperature above the LCST, the plot of logarithm of net initial rate versus inverse temperature exhibited a shift for the reactions catalyzed by hairy particles and leveled off or decreased slightly in the case of using the free copolymer as catalyst, presumably because the structures of the aggregates of hairy particles and free copolymer chains were different. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2853–2870, 2009     

Atomistic insights on the LCST behavior of PMEO2MA in water by molecular dynamics simulations

Fully atomistic molecular dynamics simulations of poly(2‐[2‐methoxyethoxy]ethyl methacrylate) (PMEO₂MA) in water at temperatures below and above its lower critical solution temperature (LCST) were performed to improve the understanding of its LCST behavior. Atomic trajectories were used to calculate various structural and dynamic properties. Simulation results show that PMEO₂MA undergo a distinct coil‐to‐globule transition above LCST. Detailed analyses of the number of first hydration shell water molecules around various atomic regions are revealed that the water solubility of PMEO₂MA below LCST is mainly provided by the hydrophobic hydration around the side chain carbon atoms. This is achieved by the cage‐like water network formations which are disrupted when the temperature is increased above LCST, accompanied by significant amount of water molecule release and local water‐ordering reduction, which leads to the LCST phase transition. Furthermore, other analyses such as the number of hydrogen bonds and hydrogen bond lifetimes suggest that intermolecular hydrogen bondings between polymer and water molecules have little effect on the phase transition. Our results will contribute to a better understanding on the LCST phase transition of oligo(ethylene glycol) methyl ether methacrylate (OEGMA)‐based homopolymers at atomistic level that will be useful when designing homo‐ and co‐polymers of OEGMAs with desired properties. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 429–441     

Ionic conductivity probed in main chain liquid crystalline azobenzene polyesters

Three main chain thermotropic liquid crystalline (LC) azobenzene polymers were synthesized using the azobenzene twin molecule (P4P) having the structure Phenylazobenzene‐tetraethyleneglycol‐Phenylazobenzene as the AA monomer and diols like diethylene glycol, tetraethylene glycol (TEG), and hexaethylene glycol as the BB comonomer. Terminal ? C(O)OMe units on P4P facilitated transesterification with diols to form polyesters. All polymers exhibited stable smectic mesophases. One of the polymers, Poly(P4PTEG) was chosen to prepare composite polymer electrolytes with LiCF₃SO₃ and ionic conductivity was measured by ac impedance spectroscopy. The polymer/0.3 Li salt complex exhibited a maximum ionic conductivity in the range of 10^?5 S cm^?1 at room temperature (25 °C), which increased to 10^?4 S cm^?1 above 65 °C. The temperature dependence of ionic conductivity was compared with the phase transitions occurring in the sample and it was observed that the glass transition had a higher influence on the ionic conductivity compared to the ordered LC phase. Reversible ionic conductivity switching was observed upon irradiation of the polymer/0.3 Li salt complex with alternate UV and visible irradiation. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 629–641     

Study on nonlinear phase‐separation for PMMA/α‐MSAN blends by dynamic rheological and small angle light scattering measurements

The phase‐separation behavior of poly(methyl methacrylate)/poly(α‐methyl styrene‐co‐acrylonitrile) (PMMA/α‐MSAN) blends upon heating was studied through dynamic rheological measurements and time‐resolved small angle light scattering, as a function of temperatures and heating rates. The spinodal temperatures could be obtained by an examination of the anomalous critical viscoelastic properties in the vicinity of phase‐separation induced by the enhanced concentration fluctuation on the basis of the mean field theory. It is found that the dependence of the critical temperatures determined by dynamic rheological measurements and small angle light scattering on heating rates both deviates obviously from the linearity, even at the very low heating rates. Furthermore, the cloud‐point curves decrease gradually with the decrease of heating rates and present the trend of approaching T_gs of the blends. The nonlinear dependence is in consistence with that extracted from the isothermal phase‐separation behavior as reported in our previous paper. It is suggested that the equilibrium phase‐separation temperature could be hardly established by the linear extrapolating to zero in the plotting of cloud points versus heating rates. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1547–1555, 2006     

Phase Behavior and Morphology of Poly(Methyl Methacrylate)/Poly(α‐Methyl Styrene‐co‐Acrylonitrile) Blends Under Quiescent and Shear Flow

The kinetics of spinodal decomposition (SD) for the binary blend poly(methyl methacrylate), PMMA, and Poly(α‐methylstyrene‐co‐acrylonitrile), PαMSAN, with 31 wt% AN content (LCST‐type phase diagram) has been thoroughly studied using a time‐resolved light scattering technique. The early stage SD was dominated by a diffusion process and can be well described within the framework of the linearized Cahn‐Hilliard theory. The spinodal temperature could be evaluated from the analysis of the early stage SD based on the Cahn theory. In addition, viscoelastic properties of this system have been systematically investigated at temperatures below and above the LCST phase diagram. The linear viscoelastic properties of the blends were found to be greatly changed by phase separation in the two‐phase regime. This change in the linear viscoelastic properties attributed to an additional contribution of concentration fluctuations to the material functions at the phase separation temperatures. The phase diagram of the blends was also estimated rheologically through the dynamic temperature ramps of G′, G″ and η*. Furthermore, the phase behavior and morphology of this system has been studied under different shear rates using simple shear apparatus and transmission electron microscopy (TEM), respectively.     

LCST‐type liquid–liquid and liquid–solid phase transition behaviors of hyperbranched polyglycerol bearing imidazolium salt

A hyperbranched polyglycerol bearing imidazolium tosylate units ( ITHB ) was synthesized through the imidazolium salt‐modification of hyperbranched polyglycerol ( HB ). ITHB was found to possess novel reversible lower critical solution temperature (LCST)‐type liquid–liquid and liquid–solid phase transition behaviors in a methanol/chloroform mixed solution. The phase transition temperatures of the liquid–liquid phase transition (PTT_1to2) and liquid–solid phase transition (PTT_2toSus) increased with increasing the ratio of methanol in the mixed solution and decreasing the concentration of ITHB . Additionally, increasing the molecular weight of ITHB decreased the PTT values. The liquid–liquid phase transition was caused by the aggregation of ITHB , which was proved by dynamic light scattering measurement. In contrast, the liquid–solid phase transition was caused by the solvation cleavage between the imidazolium rings and solvents, which was proved by ¹H NMR measurement. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009