Stereoselectivity in metal carbene and Lewis acid-catalyzed reactions from diastereomeric dirhodium(II) carboxamidates: Menthyl N-acetyl-2-oxoimidazolidine-4(S)-carboxylates

The influence of a chiral menthyl group as the pendant ester substituent on the N-acetyl-2-oxoimidazolidine-4S-carboxylate ligands in chiral dirhodium(II) imidazolidinone catalysts has been examined. Significant match/mismatch influences are evident in the observed stereocontrol for carbon–hydrogen insertion reactions with diazoacetates, but these effects are minimal in cyclopropanation reactions. Steric restrictions prevent effective enantiocontrol in hetero-Diels–Alder reactions using these menthyl-substituted catalysts.     

Synthesis of metal-(pentadentate-salen) complexes: asymmetric epoxidation with aqueous hydrogen peroxide and asymmetric cyclopropanation (salenH2: N,N'-bis(salicylidene)ethylene-1,2-diamine)

It is known that the rates and stereochemical outcomes of epoxidations and cyclopropanations using a metallosalen (salenH(2): N,N'-bis(salicylidene)ethylene-1,2-diamine) complex as catalyst are affected by a trans effect of the apical ligand of the complex. By taking into consideration this trans effect, we have synthesized optically active pentadentate salen ligands bearing an imidazole or pyridine derivative as the fifth coordinating group, and have prepared the corresponding manganese(III) and cobalt(II) complexes, in which the fifth ligand is expected to intramolecularly coordinate to the metal center and exert a trans effect. Indeed, high enantioselectivity has been achieved in epoxidations using aqueous hydrogen peroxide as the terminal oxidant and in cyclopropanations with these complexes as catalysts. In general, metallosalen-catalyzed reactions have been carried out in the presence of an excess of a donor ligand; however, the present reactions do not need the addition of any extra donor ligand.     

Ethanol steam reforming over Ni-Cu/Al2O3-MyOz （M = Si, La, Mg, and Zn） catalysts

Ni-based catalysts doped with copper additives were studied on their role in ethanol steam reforming reaction.The effects of Ca content,support species involving Al2O3-SiO2,Al2O3-MgO,Al2O3-ZnO,and Al2O3-La2O3,on the catalytic performance were studied.Characterizations by TPR,XRD,NH3-TPD,XPS,and TGA indicated that catalysts 30Ni5Cu/Al2O3-MgO and 30NiSCu/Al2O3-ZnO have much higher H2 selectivity than 30NiSCu/Al2O3-SiO2,as well as good coke resistance.H2 selectivity for 30Ni5Cu/Al2O3-MgO catalyst was 73.3% at 450℃ and increased to 94.0% at 600 ℃,whereas for 30NiSCu/Al2O3-ZnO catalyst,the H2 selectivity was 63.6% at 450 ℃ and 95.2% at 600 ℃.These Al2O3-MgO and Al2O3-ZnO supported Ni-Cu bimetallic catalysts may have important applications in the production of hydrogen by ethanol steam reforming reactions.     

Ionic liquid and solid HF equivalent amine-poly(hydrogen fluoride) complexes effecting efficient environmentally friendly isobutane-isobutylene alkylation

Isoparaffin-olefin alkylation was investigated using liquid as well as solid onium poly(hydrogen fluoride) catalysts. These new immobilized anhydrous HF catalysts contain varied amines and nitrogen-containing polymers as complexing agents. The liquid poly(hydrogen fluoride) complexes of amines are typical ionic liquids, which are convenient media and serve as HF equivalent catalysts with decreased volatility for isoparaffin-olefin alkylation. Polymeric solid amine:poly(hydrogen fluoride) complexes are excellent solid HF equivalents for similar alkylation acid catalysis. Isobutane-isobutylene or 2-butene alkylation gave excellent yields of high octane alkylates (up to RON = 94). Apart from their excellent catalytic performance, the new catalyst systems significantly reduce environmental hazards due to the low volatility of complexed HF. They represent a new, "green" class of catalyst systems for alkylation reactions, maintaining activity of HF while minimizing its environmental hazards.     

Comparison of Iridium(I) Catalysts in Temperature Mediated Hydrogen Isotope Exchange Reactions

The reactivity and selectivity of iridium(I) catalysed hydrogen isotope exchange (HIE) reactions can be varied by using wide range of reaction temperatures. Herein, we have done a detailed comparison study with common iridium(I) catalysts ( 1 – 6 ) which will help us to understand and optimize the approaches of either high selectivity or maximum deuterium incorporation. We have demonstrated that the temperature window for these studied iridium(I) catalysts is surprisingly very broad. This principle was further proven in some HIE reactions on complex drug molecules.     

铱(I)苯乙胺Schiff碱络合物催化苯乙酮的不对称氢转移反应

以光学活性的苯乙胺和吡啶－２－甲醛缩合而得到的Ｓｃｈｉｆ碱（ＰＰＥＩ）（ＰＰＥＩ＝２－［［Ｎ－（１－ｐｈｅｎｙｌｅｔｈｙｌ）ｉｍｉｎｏ］ｍｅｔｈｙｌ］ｐｙｒｉｄｉｎｅ或２－［［Ｎ－（１－苯乙基）亚胺］甲基］吡啶）为配体，进而与［Ｉｒ（ＣＯＤ）Ｃｌ］２（ＣＯＤ＝１，５－环辛二烯）反应，合成了８个光学活性铱络合物，考察了它们在异丙醇存在下催化苯乙酮不对称氢转移反应的光学活性，发现［Ｉｒ（ＣＯＤ）（ＰＰＥＩ）Ｉ］具有较好的立体选择性．其光学产率最高可达３５．７％ｅ．ｅ．．     

Copper(II) complexes of 2-(pyridine-2-yl)imidazolidine-4-thione derivatives for asymmetric Henry reactions

The preparation of a new series of 2-(pyridine-2-yl)imidazolidine-4-thione derivatives is described. Their corresponding copper(II) complexes were found to be highly enantioselective catalysts for asymmetric Henry reactions (up to 98% ee). Immobilization of these complexes by anchoring onto Merrifield? resin with respect to their use as recyclable catalysts was subsequently performed. The heterogeneous catalysts prepared in this way were tested in the asymmetric Henry reactions and showed high catalytic activity; they can be easily recycled, although their enantioselectivities were only moderate (～50% ee).     

金属载体强相互作用增强Au/TiO2催化剂在3-硝基苯乙烯选择性加氢反应的活性

自Haruta与Hutchings于上世纪八十年代末发现金纳米催化剂优异的反应活性以来,科研人员对金催化的应用领域进行了广泛而深入地研究.对金催化科学和应用领域的研究一直在进行.大量的研究表明,金催化剂在各种选择性氧化反应中具有优异的催化性能(高活性和高选择性).然而,在催化加氢反应中,尽管金催化剂相比于铂族金属显示出优越的选择性,但是由于金催化剂选择性加氢反应的活性较差,使其在选择性催化加氢反应中的应用受到了极大的限制.研究表明,金催化剂较弱的活化氢气能力是其催化加氢反应活性低的主要原因.研究发现,氢气活化的活性中心可能是界面、负价金、低配位的金原子等.金催化剂具有明显的载体效应,金属-载体之间的相互作用能够显著地改变金催化剂的催化性能.Tauster等研究发现,铂族金属与还原性载体之间存在强相互作用,能够引发载体包覆金属表面,并且使得电子从载体向金属迁移,导致金属带负电.受金属-载体强相互作用(SMSI)效应的启发,本文探究了Au/TiO2催化剂中SMSI对金催化剂加氢性能的影响.在H2或O2气氛下高温焙烧Au/TiO2,获得一系列金催化剂(Au/TiO2-TA,T为焙烧温度(oC):300、400、500和600;A为气氛:H2或O2).对比在3-硝基苯乙烯(3-NS)选择性加氢反应中的活性发现,Au/TiO2-500H的TOF值是Au/TiO2-500O的3.3倍;动力学测试表明,Au/TiO2-500H和Au/TiO2-500O的反应表观活化能分别为79.5和105.1 kJ/mol.这表明两类催化剂催化活性中心的结构存在差异.X射线光电子能谱测试结果表明,Au/TiO2-H样品中Au带部分负电,而Au/TiO2-O中Au显示为金属态.HAADF-STEM和EELS显示,Au/TiO2-H中Au NPs的表面有TiOx物种,增加了Au-TiO2的界面.EPR结果表明,Au/TiO2-H中存在表面Ti3+物种,而Au/TiO2-O样品中则没有.为确认加氢反应的活性中心到底是界面还是负价金物种,本文探究了不同温度下氢气处理的Au/TiO2的结构与性能的关系,发现Au/TiO2-300H/400H/500H催化剂都显示出较好的催化3-NS加氢活性,而Au/TiO2-600H虽然具有更多的负价金物种,但是3-NS选择性加氢反应的活性反而降低,因此,负价金不是活性中心.这是因为不同温度处理的Au/TiO2-H样品中,SMSI的强弱不同,在300、400、500 oC下,SMSI能够增加Au-TiO2的界面长度,从而增强了3-NS加氢反应的活性;而温度达到600 oC,SMSI效应太强,Au NPs被包覆更密实,导致Au/TiO2-600H的3-NS选择性加氢反应的活性下降.密度泛函理论计算表明,Au/TiO2-H样品具有更低的H2解离活化能以及氢转移活化能.氢氘交换反应也进一步验证了SMSI有利于H2的活化.     

Catalytic Activity of Copper(II) Enzyme-like Catalysts,Prepared by Molecular Imprinting Technique in Oxidation of Phenols

Summary: Molecularly imprinted polymer copper(II) catalysts were prepared by suspension polymerization of 4-vinylpyridine, trimethylolpropane trimethacrylate (series A) and additional monomer – acrylonitrile (series B) in the presence of Cu(II) ions and template: 4-metoxybenzyl alcohol; two samples were also prepared by surface molecular imprinting technique utilizing W/O emulsion. The catalytic activity was tested in model oxidation reactions of hydroquinone and 2,5-di-tert-butylhydroquinone using hydrogen peroxide. The imprinted catalysts were more effective in both reactions than non-imprinted but their activity strongly depended on Cu(II) loading. Surface imprinted samples showed the highest activity (L_H up to 100%).     

Two hydrogen-bond-cross-linked molybdenum (VI) network polymers: synthesis, crystal structures and cyclooctene epoxidation with H2O2

Two molybdenum (VI) hydrogen-bonded network polymers [MoO₂F₄]·(4,4′-H₂bpd)(H₂O)₂ (1) and [MoO₂Cl₃(H₂O)]·(4,4′-H₂bpd)Cl (2) (bpd = bipiperidine) have been synthesized and examined as catalysts for epoxidation of cyclooctene. Complexes of the Mo compounds containing the bpd ligand are prepared and characterized by infrared spectroscopy, thermogravimetric and elemental analyses. They have been structurally characterized by single crystal X-ray diffraction analysis. The structures of both the complexes are shown to be comprised of molybdenum and two protonated N-ligand cations that have resulted in a cross-linked hydrogen-bonded network structure. These complexes are applicable as catalysts for the cis-cyclooctene epoxidation reactions with hydrogen peroxide as a source of oxygen and NaHCO₃ as a cocatalyst. It has been observed that the formation of the oxidant peroxymonocarbonate ion, HCO₄ ⁻ by hydrogen peroxide and bicarbonate enhances the epoxidation reaction. Both the complexes have exhibited a good activity and a very high selectivity for the formation of cyclooctene oxide. An erratum to this article can be found at     

A coordinatively unsaturated,polymer-bound palladium(0) complex. Synthesis and catalytic activities

A coordinatively unsaturated palladium(0) complex was prepared by the reduction of a polymer-bound palladium(II) chloride complex, which was prepared by the reaction of poly-4-diphenylphosphinomethylstyrene with palladium chloride, with hydrazine in ethanol in the presence of triphenylphosphine. Catalytic activities of the polymerbound palladium(0) complex were examined for three representative types of palladium(0)-induced reactions involving oxidative addition of halides to the metal: (i) vinylic hydrogen substitutions with aryl halides, (ii) acetylenic hydrogen substitutions with aryl halides, (iii) vinylic halogen substitutions with Grignard reagents. Use of the catalyst resulted in formation of corresponding products in good yields. The catalytic activity is comparable to that of analogous homogeneous catalysts, yet is not remarkably lowered on being recycled.     

Novel Michael addition products of bis(amino acidato)metal(II) complexes: synthesis, characterization, dye degradation, and oxidation properties

Michael addition reactions of bis(amino acidato)metal(II) complexes (metal = copper, nickel, zinc; amino acid = glycine, dl-alanine, l-alanine) with acrylonitrile have been carried out under various experimental conditions in the absence of a base, resulting in mono- and disubstituted products in high yield, including partially hydrolyzed products. A reaction mechanism for the Michael addition on the nitrogen atom of the coordinated amino acid moiety, replacing the amino hydrogen atom(s), is proposed. All of the products have been characterized by Fourier transform infrared spectroscopy, electron paramagnetic resonance spectra, and elemental and electrochemical analyses. The single-crystal structures of bis( N-cyanoethylglycinato)copper(II) monohydrate ( 1a), diaquabis( N-cyanoethylglycinato)nickel(II), aquabis( N, N-dicyanoethylglycinato)copper(II) ( 2a), and bis[( N-propionamido- N-cyanoethyl)glycinato]copper(II) dihydrate ( 4a) have been confirmed by X-ray diffraction techniques. The products 1a, 2a, 4a, and bis( N-propionamidoglycinato)copper(II) monohydrate ( 3a) have been used as catalysts for the degradation of a phenol red dye and mild oxidation of various organic substrates in the presence of hydrogen peroxide. The monosubstituted complexes have been found to catalyze the reactions to a greater extent than the disubstituted complexes.     

Synthesis,copper(II) complexes and catalytic activity of substituted 6-(1,3-oxazolin-2-yl)pyridine-2-carboxylates

The optically pure 6-(4-alkyl-4,5-dihydro-1,3-oxazol-2-yl)pyridine-2-carboxylates have been prepared from 6-methoxycarbonylpyridine-2-carboxylic acid by a sequence of three reactions with the overall yield of 40–50%. Some of these compounds form stable complexes with Cu(II) ions in non-aqueous medium. Their polymeric structure was determined in the solid phase by X-ray diffraction analysis. The Cu(II) complexes were also used as catalysts for addition reactions of terminal alkynes to imines giving substituted propargylamines with maximum yield 64% and 37% ee.     

铱(I)联萘胺Schiff碱(BPMBNDI)配合物催化苯乙酮的不对称氢转移反应

用旋光活性2, 2'-(1, 1'-联萘)二胺和2-吡啶基甲醛缩合得到的Schiff碱BPMBNDI[N, N'-二(2-吡啶基亚甲基)-(1, 1'-联萘)-2, 2'-二亚胺]为配体与[Ir(COD)Cl]2(COD=1, 5-环辛二烯)反应, 生成了10个光学活性铱配合物。研究它们在异丙醇对苯乙酮不对称氢转移反应中的光学诱导活性时, 发现10个催化剂均具有较高的立体选择性,其中[Ir(COD)(BPMBNDI)I]催化的光学产率高达84%。     

Heavy Atom Effects in Tellurapyrylium Dyes Useful in Photodynamic Therapy and Catalytic Generation of H2O2

Abstract

The large rate of intersystem crossing between singlet and triplet states of tellurapyrylium dyes leads to efficient generation of singlet oxygen in irradiated airsaturated aqueous solutions containing these dyes. One reaction of tellurapyrylium dyes with singlet oxygen and water is the formation of dihydroxy tellurane [tellurium(IV)] species. We have found that the photochemical generation of dihydroxy telluranes is reversible thermally. The tellurapyrylium dye is regenerated while a molecule of hydrogen peroxide is produced. The thermal generation of hydrogen peroxide coupled with a photochemical generation of singlet oxygen allows a catalytic cycle to be devised for the conversion of oxygen and water to hydrogen peroxide. The dihydroxy telluranes are efficient two-electron oxidizing agents and can be used as catalysts to accelerate reactions using hydrogen peroxide as a two-electron oxidizing agent. Examples of tellurapyrylium dye-mediated reactions of hydrogen peroxide include reactions of leucodyes normally oxidized by horseradish peroxidase and hydrogen peroxide. These processes lead to thermal and photochemical reactions that are potentially cytotoxic following the generation of singlet oxygen in photodynamic therapy. The regeneration of the original catalyst allows repeated treatment from a single dose.     

Bifunctional Onium and Potassium Iodides as Nucleophilic Catalysts for the Solvent-Free Syntheses of Carbonates,Thiocarbonates, and Oxazolidinones from Epoxides

The catalytic potential of organo-onium iodides as nucleophilic catalysts is aptly demonstrated in the synthesis of cyclic carbonates from epoxides and carbon dioxide (CO₂), as a representative CO₂ utilization reaction. Although organo-onium iodide nucleophilic catalysts are metal-free environmentally benign catalysts, harsh reaction conditions are generally required to efficiently promote the coupling reactions of epoxides and CO₂. To solve this problem and accomplish efficient CO₂ utilization reactions under mild conditions, bifunctional onium iodide nucleophilic catalysts bearing a hydrogen bond donor moiety were developed by our research group. Based on the successful bifunctional design of the onium iodide catalysts, nucleophilic catalysis using a potassium iodide (KI)-tetraethylene glycol complex was also investigated in coupling reactions of epoxides and CO₂ under mild reaction conditions. These effective bifunctional onium and potassium iodide nucleophilic catalysts were applied to the solvent-free syntheses of 2-oxazolidinones and cyclic thiocarbonates from epoxides.     

Reactions in the Photocatalytic Conversion of Tertiary Alcohols on Rutile TiO2(110)

According to textbooks, tertiary alcohols are inert towards oxidation. The photocatalysis of tertiary alcohols under highly defined vacuum conditions on a titania single crystal reveals unexpected and new reactions, which can be described as disproportionation into an alkane and the respective ketone. In contrast to primary and secondary alcohols, in tertiary alcohols the absence of an α‐H leads to a C?C‐bond cleavage instead of the common abstraction of hydrogen. Surprisingly, bonds to methyl groups are not cleaved when the alcohol exhibits longer alkyl chains in the α‐position to the hydroxyl group. The presence of platinum loadings not only increases the reaction rate but also opens up a new reaction channel: the formation of molecular hydrogen and a long‐chain alkane resulting from recombination of two alkyl moieties. This work demonstrates that new synthetic routes may become possible by introducing photocatalytic reaction steps in which the co‐catalysts may also play a decisive role.     

Characterization of active sites over reduced Ni-Mo/Al(2)O(3) catalysts for hydrogenation of linear aldehydes

Reduced Ni-Mo/Al(2)O(3) catalysts exhibit a behavior analogous to that of sulfided Ni-Mo/Al(2)O(3) catalysts in hydrogenation of linear aldehydes to alcohols. Similar to what has been previously reported for sulfided catalysts, NO and CO(2) can be used over the reduced Ni-Mo catalysts as probe molecules for the active sites responsible for two competing reactions -- aldehyde hydrogenation to alcohols and condensation reactions to heavy products, respectively. Reduced catalysts have a higher aldehyde conversion activity and alcohol selectivity than their sulfided counterparts. The reduction temperature has a strong effect on the surface density of anion vacancies, which are responsible for alcohol formation. Reduction temperature also plays a role in determining the abundance of OH groups on the alumina surface. The effect of reduction temperature also manifests itself through the differences seen in the oxidation states of Mo and Ni species.     

Kinetics of hydrogen production upon reduction of aqueous TiO2 nanoparticles catalyzed by Pd(0), Pt(0), or Au(0) coatings and an unusual hydrogen abstraction; steady state and pulse radiolysis study

Reduction of H(+) by TiO(2) electrons (e(TiO)(2)(-)) in aqueous colloidal solution takes place in the presence of surface metal catalysts. The catalytic reduction gives rise to adsorbed hydrogen atoms. In the presence of Pd(0) or Pt(0), material balance shows that most of the adsorbed H atoms combine to molecular hydrogen. When the TiO(2) nanoparticles are partially coated with Au(0) instead of Pd(0) or Pt(0), a higher than expected molecular hydrogen level is observed, attributed to a short chain reaction involving hydrogen abstraction from 2-propanol. This unusual hydrogen abstraction reaction has not been reported before. The mechanism and energy balance are discussed. The surface modification of TiO(2) nanoparticles was carried out by reduction of K(2)PdCl(4), H(2)PtCl(6), or HAuCl(4) with e(TiO)(2)(-). The latter had been generated through electron injection from hydrated electrons, hydrogen atoms, or 2-propanol radicals, produced by gamma or pulse radiolysis prior to the addition of the metal compounds. Upon addition of the metal compounds, immediate reactions take place producing metals clusters (M(0)) by multistep reductions reactions on the TiO(2) surface. The chemical kinetics involving the different metals and the reaction rate constant of e(aq)(-) and e(TiO)(2)(-) with AuCl(4)(-) is also reported.