Combination of liquid-phase pulsed discharge and ultrasonic for saponins extraction from lychee seeds

A skillfully combined method of liquid-phase pulsed discharge and ultrasonic (LPDU) had been developed for saponins extraction from lychee seeds. Single factor and response surface methods were used to optimize the system, respectively. The optimized conditions included 30% aqueous ethanol, 62.66 mL/g ratio of liquid to solid, 3 mm centre hole diameter of hollow electrode, 123 mL/min flow velocity, length of serpentine pipe of 15 cm, 276 W ultrasonic power, 47 °C ultrasonic temperature, and discharge voltage was fixed at 14 kV. Under these conditions, it obtained a maximum saponins yield of 51.30 ± 0.08 mg/g with 10 min, which was higher than those of LPD (42.33 ± 0.98 mg/g) with 24 min, ultrasonic assisted extraction (UAE) (41.80 ± 1.31 mg/g) with 30 min and maceration (38.72 ± 1.13 mg/g) with 180 min. Meanwhile, the energy consumption of LPDU was 7560 kJ/kg, which was notably lower than those of LPD (8820 kJ/kg), UAE (25875 kJ/kg) and maceration (10248 kJ/kg). We found that the saponin constituents of LPDU were similar to LPD, UAE, ME by HPLC content detection method, and found that LPDU had the highest degree of tissue damage after scanning electron microscope (SEM) comparison, which verified the reason for its high extraction efficiency. The results showed that LPDU was an effective technology for saponins extraction, which may be potentially applied in cosmetics, medicines and food chemistry.     

Investigation on ultrasound-assisted extraction of salvianolic acid B from Salvia miltiorrhiza root

It is reported that salvianolic acid B, a bioactive phenolic compound contained in the root of Salvia miltiorrhiza, exhibits a much stronger activity in free radical scavenging and antioxidance than those of vitamin E. When a conventional refluxing method is adopted to extract salvianolic acid B from the root, in which the materials are subjected to higher temperature and longer time, the yield of this phenolic compound is lower due to the possibility of its hydrolysis to tanshinol. However, a higher extraction yield can be achieved over a shorter time period and lower temperature when an ultrasound-assisted extraction method is used. This paper investigated the parameters influencing the extraction of salvianolic acid B. Factors such as extraction time, frequency of the ultrasound, the ratio of solvent to material, and types of extraction solvent were examined. A comparison was also conducted between conventional refluxing and ultrasound-assisted extraction. Results showed that the optimal parameters to extract salvianolic acid B from the root of S. miltiorrhiza were as follows: ultrasonic frequency: 45 Hz; solvent: 60% aqueous ethanol; extraction temperature: 30 °C; extraction time duration: 25 min.; ratio of solvent to material: 20:1 (v/w, ml/g). Under these conditions, the yield of salvianolic acid B was 5.17 mg/g (33.93 mg/g) higher than those with conventional refluxing method (28.76 mg/g), indicating that the efficiency and the yield of ultrasound-assisted extraction method are higher than reflux method, and the hydrolysis of salvianolic acid B to tanshinol is effectively avoided.     

Optimization of ultrasound-assisted extraction of bioactive compounds from coffee pulp using propylene glycol as a solvent and their antioxidant activities

In the cosmetic and pharmaceutical industries, it has been increasingly popular to use alternative solvents in the extraction of bioactive compounds from plants. Coffee pulp, a by-product of coffee production, contains different phenolic compounds with antioxidant properties. The effects of polyols, amplitude, extraction time, solvent concentration, and liquid–solid ratio on total phenolic content (TPC) using ultrasound-assisted extraction (UAE) were examined by single-factor studies. Three main factors that impact TPC were selected to optimize the extraction conditions for total phenolic content (TPC), total flavonoid content (TFC), total tannin content (TTC), and their antioxidant activities using the Box-Behnken design. Different extraction methods were compared, the bioactive compounds were identified and quantified by liquid chromatography triple quadrupole mass spectrometer (LC-QQQ), and the cytotoxicity and cellular antioxidant activities of the extract were studied. According to the response model, the optimal conditions for the extraction of antioxidants from coffee pulp were as follows: extraction time of 7.65 min, liquid–solid ratio of 22.22 mL/g, and solvent concentration of 46.71 %. Under optimized conditions, the values of TPC, TFC, TTC, 1,1-diphenyl-2-picryl-hydrazil (DPPH) radical scavenging assay, 2,2′-azino-bis-3-ethylbenzthiazoline-6-sulphonic acid (ABTS) radical scavenging assay, and Ferric reducing antioxidant power assay (FRAP) were 9.29 ± 0.02 mg GAE/g sample, 58.82 ± 1.38 mg QE/g sample, 8.69 ± 0.25 mg TAE/g sample, 7.56 ± 0.27 mg TEAC/g sample, 13.59 ± 0.25 mg TEAC/g sample, and 10.90 ± 0.24 mg FeSO₄/g sample, respectively. Compared with other extraction conditions, UAE with propylene glycol extract (PG-UAE) was significantly higher in TPC, TFC, TTC, DPPH, ABTS, and FRAP response values than UAE with ethanol (EtOH-UAE), maceration with propylene glycol (PG-maceration), and maceration with ethanol (EtOH -maceration) (p < 0.05). Major bioactive compounds detected by LC-QQQ included chlorogenic acid, caffeine, and trigonelline. At higher concentrations starting from 5 mg/ml, PG-UAE extract showed higher cell viability than EtOH-UAE in both cytotoxicity and cellular antioxidant assays. The researcher expects that this new extraction technique developed in this work could produce a higher yield of bioactive compounds with higher biological activity. Therefore, they can be used as active ingredients in cosmetics (anti-aging products) and pharmaceutical applications (food supplements, treatment for oxidative stress-related diseases) with minimal use of chemicals and energy.     

Ultrasound-assisted polysaccharide extraction from Cercis chinensis and properites,antioxidant activity of polysaccharide

The purpose of the study was to improve the extraction of polysaccharide from the leaves of Cercis chinensis Bunge using ultrasound, and compare the difference between boiling and ultrasound extraction in terms of polysaccharide content, monosaccharide compounds, and evaluate how the factors affected the bioactivity. The best conditions, according to the single factor experiments and the Box-Bohnken design (BBD), were an intensity of ultrasound of 180 W, duration of extraction of 40 min, proportion of water to material of 15:1 (g/g), and a higher polysaccharide yield of 20.02 ± 0.55 (mg/g) than in boiling extraction (16.09 ± 0.82 mg/g). The antioxidative experiment suggested the polysaccharide by ultrasound exhibited higher DPPH, hydroxyl radical scavenging capacities, and reducing power at 1.2–1.4 mg/mL, which was superior to the boiling polysaccharide. Further analysis showed that the ultrasonic purified polysaccharides like Gla, N-Glu, and GluA contained more total sugar and uronic acids than the boiling method did. This may indicate that the ultrasonic isolation of the polysaccharides increase the antioxidant activity of the polysaccharides.     

Effects of various factors of ultrasonic treatment on the extraction recovery of drugs from fish tissues

In the present research, a combined extraction method of ultrasound-assisted extraction (UAE) in conjunction with solid phase extraction (SPE) was applied to isolation and enrichment of selected drugs (metoprolol, ticlopidine, propranolol, carbamazepine, naproxen, acenocumarol, diclofenac, ibuprofen) from fish tissues. The extracted analytes were separated and determined by ultra-high performance liquid chromatography with UV detection (UHPLC–UV) technique. The selectivity of the developed UHPLC–UV method was confirmed by comparison with ultra-high performance liquid chromatography–tandem mass spectrometry (UHPLC–MS/MS) analysis.The important parameters, such as composition of type and pH of extraction solvent, solid/liquid rate volume of extraction solvent and number of extraction cycles were studied. The ultrasonic parameters, such as time, power and temperature of the process were optimized by using a half-fraction factorial central composite design (CCD). The mixture of 10 mL of methanol and 7 mL of water (pH 2.2) (three times) was chosen for the extraction of selected drug from fish tissues. The results showed that the highest recoveries of analytes were obtained with an extraction temperature of 40 °C, ultrasonic power of 300 W, extraction time of 30 min.Under the optimal conditions, the linearity of method was 0.12–5.00 μg/g. The determination coefficients (R²) were from 0.979 to 0.998. The limits of detection (LODs) and limits of quantification (LOQs) for the extracted compounds were 0.04–0.17 μg/g and 0.12–0.50 μg/g, respectively. The recoveries were between 85.5% and 115.8%.     

超声辅助法提取白筋茎皮总黄酮的工艺研究

采用超声辅助法提取白霸茎皮中总黄酮化合物,通过单因素试验和正交试验,研究了超声提取条件（超声功率,乙醇浓度,料液比,时间）对其中总黄酮提取的影响。白筋茎皮总黄酮最佳提取工艺为：料液比1：30．乙醇浓度70％,超声功率120W,提取时间25min。在此工艺条件下提取,总黄酮含量为53．0843mg／g。     

Aqueous ionic liquid based ultrasonic assisted extraction of eight ginsenosides from ginseng root

We developed an aqueous ionic liquid based ultrasonic assisted extraction (ILUAE) method for the extraction of the eight ginsenosides (ginsenoside-Rg1, -Re, -Rf, -Rb1, -Rc, -Rb2, -Rb3 and -Rd) from ginseng root. A series of l-alkyl-3-methylimidazolium ionic liquids differing in composition of anions and cations were evaluated for extraction efficiency. The results indicated that the ILUAE method has a remarkable ability to improve the extraction efficiency of ginsenosides. In addition, the ILUAE procedure was also optimized on some ultrasonic parameters, such as the IL concentration, solvent to solid ratio and extraction time. Under these optimal conditions (e.g., with 0.3 M [C₃MIM]Br, solvent to solid ratio of 10:1 and extraction time of 20 min), this approach gained the highest extraction yields of total ginsenosides 17.81 ± 0.47 mg/g. Compared with the regular UAE, the proposed approach exhibited 3.16 times higher efficiency and 33% shorter extraction time, which indicated that ILUAE has a broad prospect for sample preparation of medicinal plants.     

超声波法提取苦丁茶总黄酮含量的工艺

采用超声波提取法,通过单因素实验和正交试验优选出苦丁茶中总黄酮的最佳提取工艺.苦丁茶总黄酮最佳提取工艺为:料液比(g/mL)1:30,乙醇浓度70%,超声功率80W,提取时间20min.在此条件下,苦丁茶中的总黄酮含量为21.151mg/g,RSD=0.85%(n=3).     

Ultrasonic-assisted extraction of polyphenolic compounds from Paederia scandens (Lour.) Merr. Using deep eutectic solvent: optimization,identification, and comparison with traditional methods

Ultrasonic-assisted extraction (UAE) coupled with deep eutectic solvent (DES) is a novel, efficient and green extraction method for phytochemicals. In this study, the effects of 16 DESs coupled with UAE on the extraction rate of polyphenols from Paederia scandens (Lour.) Merr. (P. scandens), an edible and medicinal herb, were investigated. DES synthesised with choline chloride and ethylene glycol at a 1:2 M ratio resulted in the highest extractability. Moreover, the effects of extraction parameters were investigated by using a two-level factorial experiment followed by response surface methodology The optimal parameters (water content in DES of 49.2%, the actual ultrasonic power of 72.4 W, and ultrasonic time of 9.7 min) resulted in the optimal total flavonoid content (TFC) (27.04 mg CE/g DW), ferric-reducing antioxidant power (FRAP) value (373.27 μmol Fe(Ⅱ)E/g DW) and 2,2′-azino-bis(3-ethylbenzthiazoline)-6-sulfonic acid radical (ABTS⁺) value (48.64 μmol TE/g DW), closely matching the experimental results. Furthermore, a comparison study demonstrated that DES-UAE afforded the higher TFC and FRAP value than traditional extraction methods. 36 individual polyphenolic compounds were identified and quantified by ultra-high-performance liquid chromatography-mass spectrometry (UHPLC-MS) in P. scandens extracts, and of which 30 were found in the extracts obtained by DES-UAE. Additionally, DES-UAE afforded the highest sum of individual polyphenolic compound content. These results revealed that DES-UAE enhanced the extraction efficiency for polyphenols and provided a scientific basis for further processing and utilization of P. scandens.     

Effect of acoustic frequency and power density on the aqueous ultrasonic-assisted extraction of grape pomace (Vitis vinifera L.) – A response surface approach

Aqueous ultrasound-assisted extraction (UAE) of grape pomace was investigated by Response Surface Methodology (RSM) to evaluate the effect of acoustic frequency (40, 80, 120 kHz), ultrasonic power density (50, 100, 150 W/L) and extraction time (5, 15, 25 min) on total phenolics, total flavonols and antioxidant capacity. All the process variables showed a significant effect on the aqueous UAE of grape pomace (p < 0.05). The Box–Behnken Design (BBD) generated satisfactory mathematical models which accurately explain the behavior of the system; allowing to predict both the extraction yield of phenolic and flavonol compounds, and also the antioxidant capacity of the grape pomace extracts. The optimal UAE conditions for all response factors were a frequency of 40 kHz, a power density of 150 W/L and 25 min of extraction time. Under these conditions, the aqueous UAE would achieve a maximum of 32.31 mg GA/100 g fw for total phenolics and 2.04 mg quercetin/100 g fw for total flavonols. Regarding the antioxidant capacity, the maximum predicted values were 53.47 and 43.66 mg Trolox/100 g fw for CUPRAC and FRAP assays, respectively. When comparing with organic UAE, in the present research, from 12% to 38% of total phenolic bibliographic values were obtained, but using only water as the extraction solvent, and applying lower temperatures and shorter extraction times. To the best of the authors’ knowledge, no studies specifically addressing the optimization of both acoustic frequency and power density during aqueous-UAE of plant materials have been previously published.     

Extracting myricetin and dihydromyricetin simultaneously from Hovenia acerba seed by Ultrasound-Assisted extraction on a lab and small Pilot-Scale

The flavonoids myricetin and dihydromyricetin are significant components of Hovenia acerba seed. In this work, myricetin and dihydromyricetin were extracted from Hovenia acerba seed using an ultrasound-assisted technique, and the extraction parameters were adjusted using the response surface design approach. HPLC was used to assess the yield of myricetin and dihydromyricetin. According to the data, myricetin and dihydromyricetin yields were 0.53 mg/g and 4.06 mg/g at a 60 % ethanol solution concentration, 180 W of ultrasonic irradiation power, a 20 mL/g ratio of liquid to solid, and a 40 °C optimal extraction temperature. The aforementioned findings are virtually in agreement with the experimental findings suggested by the model. The study mentioned above thus offers a means of separating and developing useful components of natural goods.     

Aqueous ionic liquid based ultrasonic assisted extraction of four acetophenones from the Chinese medicinal plant Cynanchum bungei Decne

In this study, an aqueous ionic liquid based ultrasonic assisted extraction (ILUAE) method for the extraction of the four acetophenones, namely 4-hydroxyacetophenone (1), 2,5-dihydroxyacetophenone (2), baishouwubenzophenone (3) and 2,4-dihydroxyacetophenone (4) from the Chinese medicinal plant Cynanchum bungei was developed. Three kinds of aqueous l-alkyl-3-methylimidazolium ionic liquids with different anion and alkyl chain were investigated. The results indicated that ionic liquids (ILs) showed remarkable effects on the extraction efficiency of acetophenones. In addition, the ILUAE, including several ultrasonic parameters, such as the ILs concentration, solvent to solid ratio, power, particle size, temperature, and extraction time have been optimized. Under these optimal conditions (e.g., with 0.6 M [C₄MIM]BF₄, solvent to solid ratio of 35:1, power of 175 W, particle size of 60–80 mesh, temperature of 25 °C and time of 50 min), this approach gained the highest extraction yields of four acetophenones 286.15, 21.65, 632.58 and 205.38 μg/g, respectively. The proposed approach has been evaluated by comparison with the conventional heat-reflux extraction (HRE) and regular UAE. The results indicated that ILUAE is an alternative method for extracting acetophenones from C. bungei.     

Process intensification and kinetic studies of ultrasound-assisted extraction of flavonoids from peanut shells

In this work, extraction of flavonoids from peanut shells has been studied in the presence of ultrasound and the results are compared with Soxhlet and heat reflux extraction for establishing the process intensification benefits. The process optimization for understanding the effects of operating parameters, such as ethanol concentration, particle size, solvent to solid ratio, extraction temperature, ultrasonic power and ultrasonic frequency, on the extraction of flavonoids has been investigated in details. The highest extraction yield (9.263 mg/g) of flavonoids was achieved in 80 min at optimum operating parameters of particle size of 0.285 mm, solvent to solid ratio of 40 ml/g, extraction temperature of 55 °C, ultrasonic power of 120 W and ultrasonic frequency of 45 kHz with 70% ethanol as the solvent. Two kinetic models (i.e. phenomenological model and Peleg’s model) have been introduced to describe the extraction kinetic of flavonoids by fitting experimental data and predict kinetic parameters. Good performance with slight loss of goodness of fit of two models was found by comparing their coefficient of determination (R²), root mean square error (RMSE) and/or mean percentage error (MPE) values. This work would provide the reduction of degradation and the economic evaluation for the extraction processes of flavonoids from peanut shells, as well as give a better explanation for the mechanism of ultrasound.     

Ionic liquid-aqueous solution ultrasonic-assisted extraction of three kinds of alkaloids from Phellodendron amurense Rupr and optimize conditions use response surface

In this paper, we chose diffident kinds of ionic liquids to optimal selection an optimal one to extract alkaloids from Phellodendron amurense Rupr. Four ionic liquids with diffident carbon chains or anions have been investigated and 1-butyl-3-methylimidazolium bromide with best productivity. Then, selections have been optimized in different conditions, including concentration of ionic liquid, time for ultrasonic treatment, ultrasonic power and solid–liquid ratio. Moreover, three conditions have been comprehensively assessment by response surface methodology, the optimal conditions were determined as follows ultrasonic power 100 W, extraction time 75 min and ratio of solvent to raw material 1:14. Under these conditions, the yield% (MIX) was 106.7% (extracted by heat reflux being defined 100%). Comparing with other methods, the advantages are saving conserving, time saving, high yield% and especially pollution-free.     

Optimization of ultrasonic cell grinder extraction of anthocyanins from blueberry using response surface methodology

Ultrasonic cell grinder extraction (UCGE), using water as the solvent, was firstly applied to extract anthocyanins from blueberry. Extraction yield was related with four variables, including ratio of solution to solid, extraction power, buffer time, and extraction time. On the basis of response surface methodology (RSM), the optimal conditions were determined to be the ratio of solution to solid as 25:1 (mL/g), the extraction power as 1500 W, the buffer time as 3.0 s, and the extraction time as 40 min. The experimental yield of anthocyanins using UCGE was 2.89 mg/g higher than that of conventional ultrasound-assisted extraction (CUAE). This study indicated that UCGE was an innovative, efficient, and environment friendly method in ultrasonic extraction fields, and had a potential to effectively extract other bioactive constituents.     

Ultrasound-assisted extraction and purification of schisandrin B from Schisandra chinensis (Turcz.) Baill seeds: Optimization by response surface methodology

The objective of this study is to develop a process consisting of ultrasonic-assisted extraction, silica-gel column chromatography and crystallization to optimize pilot scale recovery of schisandrin B (SAB) from Schisandra chinensis seeds. The effects of five independent variables including liquid–solid ratio, ethanol concentration, ultrasonic power, extraction time, and temperature on the SAB yield were evaluated with fractional factorial design (FFD). The FFD results showed that the ethanol concentration was the only significant factor for the yield of SAB. Then, with the liquid–solid ratio 5 (mL/g) and ultrasonic power 600 W, the other three parameters were further optimized by means of response surface methodology (RSM). The RSM results revealed that the optimal conditions consisted of 95% ethanol, 60 °C and 70 min. The average experimental SAB yield under the optimum conditions was found to be 5.80 mg/g, which was consistent with the predicted value of 5.83 mg/g. Subsequently, a silica gel chromatographic process was used to prepare the SAB-enriched extract with petroleum ether/acetone (95:5, v/v) as eluents. After final crystallization, 1.46 g of SAB with the purity of 99.4% and the overall recovery of 57.1% was obtained from 400 g seeds powder. This method provides an efficient and low-cost way for SAB purification for pharmaceutical industrial applications.     

Influence of ultrasonic amplitude,temperature, time and solvent concentration on bioactive compounds extraction from propolis

An ultrasound assisted method was investigated to extract bioactive compounds from propolis. This method was based on a simple ultrasound treatment using ethanol as an extraction medium to facilitate the disruption of the propolis cells. Four different variables were chosen for determining the influence on the extraction efficiency: ultrasonic amplitude, ethanol concentration, temperature and time; the variables were selected by Box-Behnken design experiments. These parameters were optimised in order to obtain the highest yield, and the results exhibited the optimum conditions for achieving the goal as 100% amplitude of ultrasonic treatment, 70% solvent concentration, 58 °C and 30 min. The extraction yield under modified optimum extraction conditions was, as follows: 459.92 mg GAE/g of TPC, 220.62 mg QE/g of TFC and 1.95% of balsam content. The results showed that the ultrasound assisted extraction was suitable for bioactive compounds extraction from propolis. The most abundant phenolic compound was kaempferol (228.8 mg/g propolis) followed by myricetin (115.5 mg/g propolis), luteolin (27.2 mg/g propolis) and quercetin (25.2 mg/g propolis).     

Ultrasound-homogenization-assisted extraction of polyphenols from coconut mesocarp: Optimization study

Coconut pericarp (shell fiber (mesocarp) and shell (endocarp)), the main by-product of coconut production, is often discarded and causing serious environmental pollution. To make better use of coconut pericarp, the extraction process of polyphenols from coconut mesocarp (CM) carefully studied by screening seven solvent systems, optimizing the assisted ultrasonic process by response surface methodology, and comparing the four processes of Ultrasound-Assisted Extraction (UAE), Homogenization-Assisted Extraction (HAE), Homogenization-Ultrasound-Assisted Extraction (HUAE), and Ultrasound-Homogenization-Assisted Extraction (UHAE). The UAE and HAE are considered to be the main methods for efficient extraction of natural active ingredients. The former effectively destroys the cell wall structure and promotes the intermolecular diffusion based on the cavitation, thermal and mechanical effect of ultrasonic, while the latter breaks the material based on strong shear force between the rotor and stator. Their combinations (HUAE and UHAE) enhance the damage to the cell wall of raw materials and improve the extraction efficiency by the synergistic effect. The results showed that using 60% acetone (V : V) as extraction solvent, solid-liquid ratio of 1:5 g mL⁻¹, ultrasonic temperature of 80 ℃, ultrasonic time of 80 min, ultrasonic power of 225 W, and then homogenizing at 10,000 rpm for 10 min, the total flavonoid content of CM reached the maximum value of 551.99 ± 12.69 mg Rutin g⁻¹ dry weight (dw), while the total phenolic content reached the maximum value of 289.48 ± 4.41 mg GAE g⁻¹ dw at 10,000 rpm for 5 min, which may be related to the oxidative degradation of polyphenols caused by the increase of polyphenol oxidase with the extension of homogenization time. This study provides a technical guarantee for the further utilization of phenolic substances in CM.     

Ultrasound-assisted extraction of highly nutritious date sugar from date palm (Phoenix dactylifera) fruit powder: Parametric optimization and kinetic modeling

Alternative sweeteners to white sugar with a lower calorie content and glycemic index obtained through date palm fruits is of great interest to the food industry. In this study, ultrasound-assisted extraction of nutritive sugar from date fruit powder was investigated through Box-Behnken design. A maximum total sugar content (TSC) of 812 mg glucose eq./g of DFP was obtained with a sugar extraction yield (SEY) of 81.40 ± 0.27 % under the following optimal extraction conditions: extraction temperature of 60 °C, extraction time of 30 min, and L/S ratio of 7.6 mL/g. Various modern techniques were used to characterize the obtained extracts and associated residues. The results showed that the extract contained fructose, glucose, and sucrose and had good thermal stability. Furthermore, SEM and TSC analysis revealed that ultrasonic treatment of the biomass improved mass transfer diffusion due to acoustic or ultrasonic cavitation, resulting in a higher sugar yield.     

Effect of ultrasonic far-infrared synergistic drying on the characteristics and qualities of wolfberry (Lycium barbarum L.)

This study investigated the effects of ultrasonic frequency, ultrasonic power, irradiation height and temperature on the drying characteristics, quality and microstructure of wolfberry by ultrasonic-assisted far-infrared drying. By fitting five commonly used thin-layer drying mathematical models, it was found that the coefficient of determination (R²) of the Weibull model was 0.99400–0.99825, the root mean square error (RMSE) was 1.2162 × 10^-4–4.5209 × 10^-4, and the reduced chi-square (χ²) was 0.00207–0.00663, which was the best fit. Under the application of ultrasound, the average drying rate of wolfberry increased. Compared with natural drying, the polysaccharide content increased by 33.2 % at 250 mm irradiation height, and the total phenol content increased by 44.9 % at 40 kHz ultrasonic frequency. The antioxidant activity was the strongest, and the total flavonoids content was the highest (2.594 mg/g) at 24 W ultrasonic power. By comparing the microstructure of wolfberry under different drying methods, such as a fresh sample, natural drying, hot air drying, and ultrasonic-assisted drying, we found that the ultrasonic assistance increased the number of micropores on the surface of wolfberry, reduced the damage to epidermal cells, reduced the mass transfer resistance of the drying process and accelerated the drying process. This study shows that ultrasonic-assisted far-infrared drying technology played a significant role in the heat and mass transfer of wolfberry drying, and had great potential in the commercial processing of wolfberry.