Exploring new insights in BAlN from evolutionary algorithms ab initio computations

BN-AlN alloys are potential candidates to achieve wide band gap material for ultraviolet device applications. By combing density functional theory and evolutionary structure predictions, we systematically explore the thermodynamic, mechanical, dynamical and optical properties of ${\mathrm{B}}_x{\mathrm{Al}}_{1?x}\mathrm{N}$ alloys. Through structure search, three compounds (cubic ($\mathrm{B}{\mathrm{Al}}_3{\mathrm{N}}_4$, and ${\mathrm{B}}_3\mathrm{Al}{\mathrm{N}}_4$, space group P-43m), and tetragonal ($\mathrm{B}\mathrm{Al}{\mathrm{N}}_2$, space group P-42m)) have been predicted. The calculated relative large formation enthalpies suggest that large miscibility gap exists in BAlN alloys. In addition, computed elastic constants and phonon show that these structures are mechanically and dynamically stable. From the state of the art LDA-1/2 we show that the direct band gap of BN-AlN evinces strong deviation from a linear dependence on B composition. We found -in particular- giant direct band gap bowing parameter of $b～11.6$ eV for the entire range of composition, where b parameter is found to be sensitive to composition x. From a detailed analysis of the physical origin of the optical gap bowing b, we found that structural and chemical contributions play the most significant effects behind the huge optical band gap bowing parameter of BAlN alloys.     

The investigation of structural,electronic, elastic and thermodynamic properties of Gd1−xYxAuPb alloys: A first principle study

First principle calculations have been employed to investigate the effects of Y concentration, pressure and temperature on various properties of ${\mathrm{Gd}}_{1?x}{\mathrm{Y}}_x\mathrm{AuPb}$ ($x=0,0.25,0.5,0.75,1$) alloys using density functional theory (DFT). The full potential linearized augmented plane wave (FP-LAPW) method within a framework of the generalized gradient approximation (GGA) is used to perform the calculated results of this paper. Phase stability of ${\mathrm{Gd}}_{1?x}{\mathrm{Y}}_x\mathrm{AuPb}$ alloys is studied using the total energy versus unit cell volume calculations. The equilibrium lattice parameters of these alloys are in good agreement with the available experimental results. The mechanical stability of ${\mathrm{Gd}}_{1?x}{\mathrm{Y}}_x\mathrm{AuPb}$ alloys is proved using elastic constants calculations. Also, the influence of Y concentration on elastic properties of ${\mathrm{Gd}}_{1?x}{\mathrm{Y}}_x\mathrm{AuPb}$ alloys such as Young's modulus, shear modulus, Poisson's ratio and anisotropy factor are investigated and analyzed. By considering both Pugh's ratio and Poisson's ratio, the ductility and brittleness of these alloys are studied. In addition, the total density of states and orbital's hybridizations of different atoms are investigated and discussed. Moreover, the effect of pressure and temperature on some important thermodynamic properties is investigated.     

Crossover effects and finite-size scaling on the temperature dependence of paraconductivity in YBa2Cu3O6.9 and Bi2Sr2CaCu30x compounds

An investigation into the superconducting order parameter thermodynamic fluctuations and their manifestations on paraconductivity in cuprate superconductors is done using a renormalized Gaussian approach based on the Ginzburg–Landau theory. The temperature dependence of paraconductivity is affected by repulsive interactions between Cooper pairs and does not follow the universal power laws predicted by the conventional Aslamazov–Larkin theory. In addition to the well known Lawrence–Doniach crossover from three to two dimensions, we also highlight the crossover from one-dimensional to two-dimensional behavior and the crossover from weak two-dimensional to strong two-dimensional critical behavior in the vicinity of the critical temperature. These dimensional crossovers result from the resistance between Cooper pairs due to critical and thermal fluctuations which cause a transition from a metastable state to one with a smaller current. Two illustrative examples (the cases of ${\mathrm{YBa}}_2{\mathrm{Cu}}_3{\mathrm{O}}_{6.9}$ and ${\mathrm{Bi}}_2{\mathrm{Sr}}_2\mathrm{Ca}{\mathrm{Cu}}_3{\mathrm{0}}_x$ compounds) are provided in support of the analysis, so as to demonstrate the usefulness of the approach.     

Structural and optical properties of cadmium magnesium zinc oxide (CdMgZnO) nanoparticles synthesized by sol–gel method

Nanoparticles of ${\mathrm{Cd}}_x{\mathrm{Mg}}_{0.12?x}{\mathrm{Zn}}_{0.88}\mathrm{O}$ $(0\le x\le 0.02)$ were synthesized by a simple sol gel route with the combination of chelating agents. Effect of cadmium on the phase, structural, morphological and optical properties of the synthesized nanoparticles has been studied and reported by using X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), Fourier transform infrared spectroscopy (FTIR) and UV–Vis diffuse reflectance spectroscopy (UV–vis DRS). The crystal size, lattice parameters, unit cell volume, X-ray density, inter-planar distances and bond length were obtained and analyzed from the XRD data. The X-ray analysis reveals the formation of a single phase with a hexagonal wurtzite structure, where an increase of the cell volume was achieved as the Cd content was increased as well. Synthesized nanoparticle were nearly spherical at nano-size regime and are loosely agglomerated as observed from the SEM analysis. EDX spectra of the composition confirmed the appropriate stoichiometric ratio. A fundamental absorption peak centered at 375 nm was observed from the UV–visible absorption spectra which shifted towards a higher wavelength correlating the narrowing of the energy band gap due to increase in Cd content. The structural adjustment from the IR spectra confirmed the stretching vibration of Zn–O in the ${\mathrm{Cd}}_x{\mathrm{Mg}}_{0.12?x}{\mathrm{Zn}}_{0.88}\mathrm{O}$ lattice with Cd content.     

Effect of ultrasonic irradiation power on sonochemical synthesis of gold nanoparticles

In this work, optimized size distribution and optical properties in the colloidal synthesis of gold nanoparticles (GNPs) were obtained using a proposed ultrasonic irradiation assisted Turkevich-Frens method. The effect of three nominal ultrasound (20 kHz) irradiation powers: 60, 150, and 210 W have been analyzed as size and shape control parameters. The GNPs colloidal solutions were obtained from chloroauric acid (HAuCl₄) and trisodium citrate (C₆H₅Na₃O₇·2H₂O) under continuous irradiation for 1 h without any additional heat or stirring. The surface plasmon resonance (SPR) was monitored in the UV–Vis spectra every 10 min to found the optimal time for localized SPR wavelength (${\lambda }_{\mathrm{L}\mathrm{S}\mathrm{P}\mathrm{R}}$), and the 210 sample procedure has reduced the ${\lambda }_{\mathrm{L}\mathrm{S}\mathrm{P}\mathrm{R}}$ localization at 20 min, while 150 and 60 samples have showed ${\lambda }_{\mathrm{L}\mathrm{S}\mathrm{P}\mathrm{R}}$ at 60 min. The nucleation and growth of GNPs showed changes in shape and size distribution associated with physical (cavitation, temperature) and chemical (radical generation, pH) conditions in the aqueous solution. The results showed quasi-spherical GNPs as pentakis dodecahedron (${\lambda }_{\mathrm{L}\mathrm{S}\mathrm{P}\mathrm{R}}$ = 560 nm), triakis icosahedron (${\lambda }_{\mathrm{L}\mathrm{S}\mathrm{P}\mathrm{R}}$ = 535 nm), and tetrakis hexahedron (${\lambda }_{\mathrm{L}\mathrm{S}\mathrm{P}\mathrm{R}}$ = 525 nm) in a size range from 12 to 16 nm. Chemical effects of ultrasound irradiation were suggested in the disproportionation process, electrons of AuCl₂⁻ are rapidly exchanged through the gold surface. After AuCl₄⁻ and Cl⁻ were desorbed, a tetrachloroaurate complex was recycled for the two-electron reduction by citrate, aurophilic interaction between complexes AuCl₂⁻, electrons exchange, and gold seeds, the deposition of new gold atoms on the surface promoting the growth of GNPs. These mechanisms are enhanced by the effects of ultrasound, such as cavitation and transmitted energy into the solution. These results show that the plasmonic response from the reported GNPs can be tuned using a simple methodology with minimum infrastructure requirements. Moreover, the production method could be easily scalable to meet industrial manufacturing needs.