Column Preconcentration of Aluminum and Copper(II) in Alloys, Biological Samples, and Environmental Samples with Alizarin Red S and Cetyltrimethylammonium-Perchlorate Adsorbent Supported on Naphthalene Using Spectrometry

A column method has been established for the preconcentration of aluminum and copper(II) with Alizarin Red S and a cetyltrimethylammonium-perchlorate ion pair supported on naphthalene, using a simple glass-tipped tube. Aluminum and copper(II) react with Alizarin Red S to form water-soluble colored chelate anions. These chelate anions form water-insoluble ternary complexes with the adsorbent on the inactive surface of naphthalene packed into a column. They are quantitatively retained in the pH ranges of 4.7-5.2 for aluminum and 5.0-10.0 for copper. The solid mass is dissolved out from the column with 5 ml of dimethylformamide (DMF) for aluminum and 5 ml of ethanol for copper and the absorbance was measured with a spectrometer at 525 nm for aluminum and at 529 nm for copper. The calibration curves were linear over the concentration ranges of 0.25-5.0 μg of aluminum in 5 ml of DMF solution and 0.50-12.0 μg of copper in 5 ml of ethanol solution. The molar absorptivities and Sandell′s sensitivities were respectively calculated to be 2.8 × 10⁴ liter · mol⁻¹ · cm⁻¹ and 9.62 × 10⁻⁴ μg · cm⁻² for aluminum and 2.5 × 10⁴ liter · mol⁻¹ · cm⁻¹ and 2.5 × 10⁻³ μg · cm⁻² for copper. Seven replicate determinations of sample solutions containing 2.5 μg of aluminum and 6.0 μg of copper gave mean absorbances of 0.520 and 0.480 with relative standard deviations of 1.67 and 0.33%, respectively. Interference due to various foreign ions has been studied and the method has been applied to the determination of aluminum in standard alloys, tea leaves, vehicle particulates, copper in coal fly ash, and commercial salt samples.     

Copper(II)-cetyltrimethylammonium chloride-chromal blue G ternary complex and its application to the spectrophotometric determination of copper(II)

A sensitive spectrophotometric method for the determination of copper(II) based on a ternary complex with chromal blue G, a triphenylmethane reagent in the presence of cetyltrimethylammonium chloride, is described. The sensitivity of color reaction between copper and chromal blue G has been greatly increased by the sensitizing action of cetyltrimethylammonium chloride, a cationic surfactant. The color development of the ternary complex can be utilized in the highly sensitive spectrophotometric determination of copper. The molar absorptivity of the binary complex between copper and chromal blue G ε_630nm = 9.56 × 10³liters · mol⁻¹ · cm⁻¹ is enchanced on ternary complex formation to ε_{542 nm} = 4.78 × 10⁴liters · mol⁻¹ · cm⁻¹. The ternary complex gave a maximal absorbance at 542 nm in the pH range 9.8–11. Beer's law is obeyed up to at least 1.2 ppm of copper. The maximal absorbance of the ternary complex was found to develop within 5 min and then it remains constant for several hours. The formation constant of the ternary complex is calculated to be 8.6 × 10¹⁰ under these conditions.     

Selective spectrophotometric determination of thorium(IV) with 2-(5-Bromo-2-pyridylazo)-5-diethylaminophenol

A spectrophotometric study of the Th(IV) complex of a new reagent 2-(5-Bromo-2- pyridylazo)-5-diethylaminophenol (5-Br-PADAP) is presented. A reddish brown complex is formed at pH 4.86, and shows maximal absorbance at 580 nm with molar absorptivity of 1.66 × 10⁵ mol⁻¹ cm⁻¹ liter. Beer's law is obeyed over the range 0.0 to 15 μg of thorium. Rare earths ions like La³⁺, Ce³⁺, and Y³⁺ do not interfere because they form complexes with 5-Br-PADAP at higher pH's (>9.94) (1). A new method for determining trace amounts of thorium is proposed, which possesses the advantages of high sensitivity and selectivity.     

Spectrophotometric determination of cobalt as the orange cobalt-biacetylmonoxime 2-pyridylhydrazone complex

A spectrophotometric method for the determination of cobalt is described. The method is based on the formation of an orange color by reaction of cobalt(II) with biacetylmonoxime 2-pyridylhydrazone in basic solutions. The molar absorptivity at 480 nm is about 9.2 × 10³ liters mol⁻¹ cm⁻¹ (pH 10) and spectrophotometric sensitivity is 0.0062 μg Co cm⁻² for ABSORBANCE = 0.001.     

Spectrophotometric determination of vanadium in steel and alloys with 2-(5-chloro-2-pyridylazo)-5-dimethylaminophenol

Using spectrophotometric methods, the protopysis constant of the 5.ClDMPAP reagent (pK_a1 = −0.19; pK_a2 = 1.97; pK_a3 = 11.98) and the stability constant of its vanadic complex (6.0 ± 0.11) × 10¹⁴ were determined. A high-sensitivity spectrophotometric method was developed to determine V(V) using 0.1–1.2 ppm and pH = 3.8. ε₅₈₆ = 55,300 ± 400 liters · mol⁻¹ · cm⁻¹. A study on the most important interferences and the way to eliminate them was carried out. The method can be applied to the determination of the element in steels and ferrovanadiums.     

Spectrophotometric determination of titanium (IV) with chlorpromazine hydrochloride

Spectrophotometric Determination of Titanium(IV) with Chlorpromazine HydrochlorideThe extraction of titanium(IV)-thiocyanate complex from hydrochloric acid with chlorpromazine (CPA) dissolved in chloroform has been studied. The composition of the extracted species was found to be (CPAH⁺)₂[Ti(CNS)₆²⁻]. This complex, dissolved in chloroform, has maximum absorbance at 417 nm and a molar absorptivity of 2.6 × 10⁴ mol⁻¹ · cm⁻¹ · liter. Titanium(IV) was determined spectrophotometrically in the organic phase. Beer's law is obeyed in the titanium concentration range 0.2-2.2 μg/ml.     

Extraction and spectrophotometric determination of trace amounts of niobium with diphenylglioxal-bis-(2-hydroxybenzoylhydrazone)

A method is described for the direct spectrophotometric determination of microamounts of niobium based on its extraction into chloroform with dephenylglyoxal-bis-(2-hydroxy benzoyl) hydrazone (BSHB). This reagent builds up a chelate with Nb(V) in very acidic media, its chloroform solution being pink to reddish depending on niobium concentration (λ_max = 495 nm). Optimum conditions for chelate extraction and niobium determination have been established. The precision of procedure proposed, expressed in terms of relative standard deviation, is ±1.0%.It is shown that the method is sensitive, the molar absorptivity being 1.95 ± 0.02 × 10⁴ liter · mol⁻¹ · cm⁻¹ in the organic phase, and the interferences study demonstrates a high selectivity against common cations and the majority of those accompanying niobium in its natural sources and special alloys.     

Spectrophotometric determination of zinc, cadmium, and lead after extraction of their morpholine-4-carbodithioates into molten naphthalene and replacement by copper

Zinc, cadmium, and lead react quantitatively in the pH ranges of 3.9–9.2, 3.5–11.2, and 5.5–10.5, respectively, to form water insoluble and thermally stable complexes which are easily extracted into molten naphthalene. The solid naphthalene containing the colorless complex is dissolved in chloroform and then replaced by copper to develop a yellow color in the chloroform layer. The absorbance in each case is measured at 435 nm against reagent blank. Beer's law holds over the concentration ranges of 3.5–95.0, 3.0–105.0, and 8.5–125. 0 μg for zinc, cadmium, and lead, respectively, into 10 ml of the chloroform solution. The molar absorptivities are calculated to be Zn, 1.048 × 10⁴ liters mol⁻¹ cm⁻¹; Cd, 1.054 × 10⁴ liters mol⁻¹ cm⁻¹, and Pb, 1.014 × 10⁴ liters mol⁻¹ cm⁻¹ with sensitivities in terms of Sandell's definition of 0.0062 μg Zn/cm², 0.010 μg Cd/cm², and 0.020 μg Pb/cm², respectively. Ten replicate determinations of sample solutions containing 30 μg of zinc, 18.7 μg of cadmium, and 42.5 μg of lead give mean absorbances 0.480, 0.175, and 0.208 with standard deviations of 0.0017, 0.0013, and 0.0015 or relative standard deviations of 0.35, 0.74, and 0.72%, respectively. The interference of various ions has been studied and the method has been applied to the determination of cadmium in various synthetic mixtures and zinc and lead in some standard reference materials.     

Spectrophotometric determination of cerium(IV) with tetraethylenepentaamineheptaacetic acid (TPHA)

Tetraethylenepentaamineheptaacetic acid (TPHA) combines with cerium(IV) to form an intensely yellow chelate having a molar absorptivity of 4.5 × 10⁴ mol⁻¹ · cm⁻¹ · liter at 304 nm. The chelate contains 1 mol of TPHA coordinated to a cerium(IV) atom. Beer's law is followed from 0.05 to 0.5 ppm cerium (1.00-cm cells). Of many ions tested at the 1-ppm level and the 100-ppm concentration, only iron(III) produces little interference.     

Spectrophotometric determination of microamounts of gold(III) with propericiazine

Propericiazine is proposed as a new reagent for the spectrophotometric determination of gold(III). The reagent forms an orange-red-colored species with gold(III) instantaneously in 4–8 M phosphoric acid. The orange-red species exhibits maximum absorbance at 511 nm. Beer's law is valid over the concentration range 0.1–7.0 μg/ml. The molar absorptivity is found to be 3.85 × 10⁴ liter mol⁻¹ cm⁻¹. The effects of acidity, time, order of addition of reagents, temperature, reagent concentration, and diverse ions are investigated.     

Extraction and spectrophotometric determination of vanadium with 4-(2-thiazolylazo)resorcinol and tetraphenylarsonium and phosphonium chlorides

Extraction of vanadium-4-(2-thiazolylazo)resorcinol complexes by quaternary salts such as triphenylmethylarsonium iodide, tetraphenylarsonium chloride, and tetraphenylphosphonium chloride has been studied. Quantitative extraction is achieved with tetraphenylarsonium and tetraphenylphosphonium chlorides in the pH region between 3.5 and 5. The optimum conditions for the extraction and spectrophotometric determination of vanadium in the extract are: pH 3.8–4.0, the concentration of vanadium 0.1–0.4 μg/ml. Effective molar absorptivity at λ_max = 555 is (2.55 ± 0.05) × 10⁴ liters mol⁻¹ cm⁻¹. Beer's law is obeyed. Relative standard deviation is 2–10% depending on the concentration level. The composition of the extracted complexes was studied in the solution and in the solid state. For their characterization chemical and spectral evidence and comparison with the vanadium-PAR complexes have been combined.     

Some observations on the solvent extraction and spectrophotometric determination of palladium using 3,4-dihydro-4,4,6-trimethyl-2(1H)-pyrimidine-thione as a selective reagent

A highly selective spectrophotometric method is described for the determination of palladium, using 3,4-dihydro-4,4,6-trimethyl-2(1H)-pyridinethione (DTPT). The intense yellow 1:2 complex is extractable in chloroform from aqueous solution of pH 5.5. The maximum absorption occurs at 420 nm, ε = 3.90 × 10⁴ liter/mol⁻¹ cm⁻¹ and the sensitivity of the determination is 0.023 μg/ml. Palladium can be determined over a range of 0.4–24.6 ppm. CN⁻ interferes in this determination and should be absent. The method is applied to the determination of palladium in hydrogenation catalysts.     

Photometric determination of iron (III)

A sensitive colored reaction of tiron with iron (III) is described. It is based on a complex formation between tiron and iron (III) in basic medium. The method is suitable to determine 0.4–10 ppm of iron (III) with a relative standard deviation of 0.45–1.4% depending on the concentration level, molar absorptivity of 5.7 × 10³ liter mol⁻¹ cm⁻¹, and Sandell sensitivity index of 0.0098 μg/cm².Because of being simple and rapid, this method can certainly be used in routine analysis.     

Extraction-spectrophotometric determination of vanadium with 5,5′-dithiodisalicylhydroxamic acid (DTDSHA)

A new method for the extraction-spectrophotometric determination of V(V) is proposed. The violet complex V(V)-5,5′-dithiodisalicylhydroxamic acid formed in aqueous medium (pH 5.0) is extracted into a solution of trioctylmethylammonium chloride (Adogen 464) in toluene, and its spectrophotometric characteristics are studied. The stoichiometry of the complexes formed is 1:1 and 2:1 (reagent:vanadium), and 1:3 for the ionic association complex (2:1):trioctylmethylammonium ion. The system follows Beer's law at pH 5.0 (λ = 550 nm) over the concentration range 0.4 to 2.0 ppm (ε = 7.34 × 10³ liter · mol⁻¹ · cm⁻¹). The method is applied for the determination of vanadium in steel.     

Monothiourea-3-nitrophthalic acid as a new reagent for spectrophotometric analyses : II. Determination of ruthenium(III) ions

The results of the examination of the reaction between a new reagent, MT3NF acid, and palladium(II) ions, as well as the composition of the formed complexes have been discussed. The new extraction-spectrophotometric method for the determination of palladium(II) ions by using MT3NF acid was presented. Beer's law is obeyed over the range 0.1 to 3 μg of Pd/cm³. Molar absorptivity is 2.9 × 10⁴ liter mol⁻¹ cm⁻¹ at the absorption maximum of 306 nm. The influence of different ions has been described.     

Spectrophotometric determination of cobalt(II) with 2-(3′-sulfobenzoyl)pyridine benzoylhydrazone

A simple method has been described for the Spectrophotometric determination of cobalt(II) with 2-(3′-sulfobenzoyl)pyridine benzoylhydrazone (SBPBH). In aqueous solution, cobalt(II) reacts with SBPBH to form a yellow complex, which is not destroyed even by the addition of 3.8 M perchloric acid. The absorption maximum of the complex in 1.5 M perchloric acid medium was found to be 400 nm; the molar absorptivity was 2.17 × 10⁴ liters mol⁻¹ cm⁻¹. The proposed method is fairly selective and has been applied to the determination of cobalt in standard alloy steel samples.     

Spectrophotometric study of the formation of ternary complexes of iron(III) with some triphenylmethane dyes and cationic surfactants

The optimum conditions have been found for the formation of the ternary complexes of iron(III) with Chrome Azurol S (CAS), Eriochrome Cyanine R, and Pyrocatechol Violet in the presence of cetyltrimethylammonium (CTA), cetylpyridinium, or tetradecyldimethyl-benzylammonium ions. The pH range of the complex formation is limited mainly by the pertinent hydrolysis constants of the metal ions. The maximum absorbances were obtained for excess R and cationic surfactants, ensuring the formation of complexes with the highest R:Fe molar ratio. The method based on the Fe-CAS-CTA system (ε = 1.32 × 10⁵ liter mol⁻¹ cm⁻¹ at 628 nm) is most sensitive and is recommended for the spectrophotometric determination of iron.     

Rapid analysis of cation-exchangeable property in acidic soil : III. Sensitive spectrophotometric determination of microgram amounts of exchangeable magnesium with xylidyl Blue I in the presence of cetyltrimethylammonium bromide (CTAB)

A simple and sensitive procedure for Spectrophotometric determination of exchangeable magnesium has been developed. At 0.15 – 0.375 N ammonia, magnesium reacts with xylidyl Blue I in the presence of CTAB to form a colored ternary complex, which has an absorption maximum at 524 nm. The molar absorption coefficient is 2.2 × 10⁴ liters · mol⁻¹ · cm⁻¹. The Beer rule will be valid for concentrations from 0 to 8 μg/20 ml magnesium. The method has been used for rapid determination of microgram amounts of exchangeable magnesium in acidic soil with good reproducibility.     

Microdetermination of silver(I) and iodide ions with a pyridinol azo dye: A spectrophotometric method

A simple, rapid, sensitive, and selective method for the spectrophotometric microdetermination of silver(I) using ammonium(2′,3′-dihydroxy pyridyl-4′-azo)benzene-4-arsonate (DHP-4A), a water soluble pyridinol azo dye is proposed. The red colored 1:1 (metal to ligand) complex formed has molar extinction coefficient (ε) 2.95 × 10⁴ 1 mol⁻¹ cm⁻¹ and absorbs maximum at 535 nm, in highly alkaline medium. Beer's law is obeyed up to 3.36 ppm and Sandell's sensitivity (for an absorbance 0.001) is 0.0037 μg of Ag(I)/cm². The silver(I)-(DHP-4A) complex has also been used in the microdetermination of iodide ions using ligand exchange reaction. The optimum concentration range of iodide ions which can reproducibly be determined is 1.27–37.9 μg/10 ml.     

Adsorption of 2-amino-5-nitropyridine on the (111) and (210) silver faces

The adsorption isotherms of 2-amino-5-nitropyridine (ANP) on the (111) and (210) silver faces from an aqueous solution of 0.09 M KClO₄ + 0.02 M NaOH were determined at −0.4 V vs. the 1 mol⁻¹ calomel electrode using double-potential-step chronocoulometry. The surface concentration Γ_ANP of ANP was obtained by stepping the applied potential from −0.4 V, where ANP is electroinactive, to −1.2 V, where ANP is electroreduced to 2,5-diaminopyridine. The charge involved in this step, once corrected for the diffusive and capacitive contributions, yields 6FΓ_ANP directly. The maximum surface concentration and standard Gibbs energy of adsorption are equal to 3.6 × 10⁻¹⁰ mol cm⁻² and −35 kJ mol⁻¹ on Ag(111) and 5.2 × 10⁻¹⁰ mol cm⁻² and 42 kJ mol⁻¹ on Ag(210), thus demonstrating the strong effect of surface crystallography on the energetics of ANP adsorption.