Synthesis and structural characterization of 1′-(diphenylphosphino)ferrocene-1-carboxamide, its corresponding hydrazide, some heterocycles derived from the hydrazide and palladium(II) complexes with these functional phosphinoferrocene ligands

Two polar phosphinoferrocene ligands, 1′-(diphenylphosphino)ferrocene-1-carboxamide (1) and 1′-(diphenylphosphino)ferrocene-1-carbohydrazide (2), were synthesized in good yields from 1′-(diphenylphosphino)ferrocene-1-carboxylic acid (Hdpf) via the reactive benzotriazole derivative, 1-[1′-(diphenylphosphino)ferrocene-1-carbonyl]-1H-1,2,3-benzotriazole (3). Alternatively, the hydrazide was prepared by the conventional reaction of methyl 1′-(diphenylphosphino)ferrocene-1-carboxylate with hydrazine hydrate, and was further converted via standard condensation reactions to three phosphinoferrocene heterocycles, viz 2-[1′-(diphenylphosphino)ferrocen-1-yl]-1,3,4-oxadiazole (4), 1-[1′-(diphenylphosphino)ferrocen-1-carbonyl]-3,5-dimethyl-1,2-pyrazole (5), and 1-[1′-(diphenylphosphino)ferrocene-1-carboxamido]-3,5-dimethylpyrrole (6). Compounds 1 and 2 react with [PdCl₂(cod)] (cod = η²:η²-cycloocta-1,5-diene) to afford the respective bis-phosphine complexes trans-[PdCl₂(L-κP)₂] (7, L = 1; 8, L = 2). The dimeric precursor [(L^NC)PdCl]₂ (L^NC = 2-[(dimethylamino-κN)methyl]phenyl-κC¹) is cleaved with 1 to give the neutral phosphine complex [(L^NC)PdCl(1-κP)] (9), which is readily transformed into a ionic bis-chelate complex [(L^NC)PdCl(1-κ²O,P)][SbF₆] (10) upon removal of the chloride ligand with Ag[SbF₆]. Pyrazole 5 behaves similarly affording the related complexes [(L^NC)PdCl(5-κP)] (12) and [(L^NC)PdCl(5-κ²O,P)][SbF₆] (13), in which the ferrocene ligand coordinates as a simple phosphine and an O,P-chelate respectively, while oxadiazole 4 affords the phosphine complex [(L^NC)PdCl(4-κP)] (11) and a P,N-chelate [(L^NC)PdCl(4-κ²N³,P)][SbF₆] (14) under similar conditions. All compounds were characterized by elemental analysis and spectroscopic methods (multinuclear NMR, IR and MS). The solid-state structures of 1⋅½AcOEt, 2, 7⋅3CH₃CN, 8⋅2CHCl₃, 9⋅½CH₂Cl₂⋅0.375C₆H₁₄, 10, and 14 were determined by single-crystal X-ray crystallography.     

Synthesis and structural characterization of rac-2-[(diphenylphosphino)methyl]ferrocenecarboxylic acid, its selected derivatives and some rhodium complexes

rac-2-[(Diphenylphosphino)methyl]ferrocenecarboxylic acid (1) was prepared in a good yield from rac-2-(N,N-dimethylaminomethyl)bromoferrocene (2) via rac-2-(hydroxymethyl)bromoferrocene (4) and rac-2-[(diphenylphosphino)methyl]bromoferrocene (5), and further converted to the respective phosphine oxide (6), phosphine sulfide (7) and methyl ester (8). The phosphines 1 and 8 were studied as ligands in rhodium complexes. The reaction of di-μ-chloro-bis[chloro-(η⁵-pentamethylcyclopentadienyl)rhodium(III)] with the stoichiometric amounts of 1 and 8 yielded the corresponding mononuclear complexes with P-monodentate ligands: [RhC₂(η⁵-C₅Me₅)(L-κP)], 9 and 10, respectively. Attempted deprotonation of 9 with LiBu or KOt-Bu gave intractable mixtures, in which the parent complex 9 as the major component was accompanied by two new compounds, likely the diastereoizomeric phosphinocarboxylate complexes. A defined O,P-chelating phosphinocarboxylate complex, [SP-4-2]-carbonyl-[rac-2-{(diphenylphosphino)methyl}ferrocenecarboxylato-κ²O,P]-tricyclohexylphosphinerhodium(I) (12), was obtained from the displacement of acetylacetonate(1−) (acac) ligand in [Rh(acac)(CO)(PCy₃)] (Cy = cyclohexyl) with acid 1. The structures of 1, 6 · CHCl₃, and 7 · 1/2 CH₂Cl₂, 10, and hydrated complexes 9 and 12 were determined by single-crystal X-ray diffraction.     

Trimethylstannyl (diphenylphosphino)acetate: a source of (diphenylphosphino)acetate ligand in the synthesis of coordination compounds

Trimethylstannyl (diphenylphosphino)acetate (1), which is readily accessible from potassium (diphenylphosphino)acetate and trimethylstannyl chloride, may serve as the source of (diphenylphosphino)acetate anion in the preparation of coordination compounds. Thus, the reactions between [M(cod)Cl₂] (M = Pd and Pt; cod = η²:η²-cycloocta-1,5-diene) and two equivalents of 1 give [M(Ph₂PCH₂CO₂-κ²O,P)₂] (2 and 3), while the reaction of [{Pd(μ-Cl)Cl(PFur₃)}₂] (4; Fur = 2-furyl) with one equivalent of 1 yields [SP-4-3]-[PdCl(Ph₂PCH₂CO₂-κ²O,P)(PFur₃)] (5). The reactions of 1 with the dimers [{Rh(η⁵-C₅Me₅)Cl(μ-Cl)}₂] and [{Ru(η⁶-1,4-MeC₆H₄(CHMe₂))Cl(μ-Cl)}₂] (at 1-to-metal ratio 1:1) produce O,P-chelated complexes as well, albeit as stable adducts with the liberated Me₃SnCl: [RhCl(η⁵-C₅Me₅)(Ph₂PCH₂CO₂-κ²O,P)] · Me₃SnCl (6) and[RuCl(η⁶-1,4-MeC₆H₄(CHMe₂))(Ph₂PCH₂CO₂-κ²O,P)] · Me₃SnCl (8). The related complexes with P-monodentate (diphenylphosphino)acetic acid, [RhCl₂(η⁵-C₅Me₅)(Ph₂PCH₂CO₂H-κ,P)] (7) and [RuCl₂(η⁶-1,4-MeC₆H₄(CHMe₂))(Ph₂PCH₂CO₂H-κP)] (9), were obtained by bridge splitting in the dimers with the phosphinocarboxylic ligand. All new compounds were characterized by spectral methods and combustion analyses, and the structures of 2 · 3CH₂Cl₂, 3, 4, 5, 6 and 8 were determined by X-ray crystallography.     

Syntheses, spectroscopic and structural characterizations and metal ion binding properties of Schiff bases derived from 4′-aminobenzo-15-crown-5

A series of benzyloxybenzaldehyde derivatives (1-4) were synthesized by the reactions of 4-(bromomethyl)benzonitrile with 4-hydroxy-3-methoxybenzaldehyde (vanillin), 2-hydroxy-3-methoxybenzaldehyde (o-vanillin), 2-hydroxy-4-methoxybenzaldehyde and 2-hydroxy-5-methoxybenzaldehyde. Condensation reactions among the new benzyloxybenzaldehyde derivatives (1-4) with 4′-aminobenzo-15-crown-5 yielded the new Schiff base compounds (5-8). Sodium complexes (5a-8a) and potassium complexes (5b-8b) were prepared with NaClO₄ and KI, respectively. All of these synthesized compounds were characterized on the basis of FT-IR, ¹H and ¹³C NMR, mass spectrometry and elemental analyses data. The solid state structures of compounds 8 and 5a were determined by X-ray crystallography. The extraction abilities of compounds 5-8 were also evaluated in CH₂Cl₂ by using several main group and transition metal picrates, such as Na⁺, K⁺, Pb²⁺, Cr³⁺, Ni²⁺, Cu²⁺ and Zn²⁺.     

Reactions of P4S10 and pyPS2Cl with N,N′-diphenylurea and N,N′-diphenylthiourea

The reaction of P₄S₁₀ (1) with N,N′-diphenylurea (PhNH)₂CO (2) results in new heterocyclic compounds: the pyridinium salt of 1,3-diphenyl-2-sulfido-2-thioxo-1,3-diaza-2λ⁵-phosphetidine (3) (with a P–N–C–N cycle) and the pyridinium salt of 1,4-diphenyl-2,5-disulfido-2,5-dithioxo-1,4-dithiadiaza-2λ⁵,5λ⁵-diphosphinane (4), containing the (P–S–N)₂ cycle and the cyclic thiophosphates [pyH]₂[P₂S₈] (5), [pyH]₂[P₂S₇] (6) and [pyH]₃[P₃S₉] (7). A similar reaction, but carried out with N,N′-diphenylthiourea (PhNH)₂CS (8), leads to the formation of 4 and 6. pyPS₂Cl (9), used as an alternative starting material, also yields compounds 3, 4, 5, and further [pyH][PS₂Cl₂] (10) and S₈ after reaction with 2. Compound 3 reacts with Pd(CH₃COO)₂, with the formation of the complex [Pd(Ph₂N₂COPS₂)₂] (11). The crystal structures of 3 and 7 were determined by single-crystal X-ray diffraction.     

Synthesis, structure and photo-physical properties of phosphorus-supported fluorescent probes

Various phosphorus-supported fluorescent probes have been synthesized by the condensation reaction of multi-functional phosphorus hydrazides with various fluorophore-containing carboxaldehydes. Compounds, thus prepared, in this study are (PhO)₂P(O)[N(Me)-NCH-R] (1a, 1b), Ph₂P(O)[N(Me)-NCH-R] (2b, 2c, 2d), PhP(O)[N(Me)-NCH-R]₂ (3b, 3c), P(S)[N(Me)-NCH-R]₃ (4b, 4c), P(O)[N(Me)-NCH-R]₃ (5a, 5b, 5c), N₃P₃(O₂C₁₂H₈)₂[N(Me)-NCH-R]₂ (6a, 6b, 6c), N₃P₃(O₂C₁₂H₈)[N(Me)-NCH-R]₄ (7a, 7b, 7c, 7d) and N₃P₃[N(Me)-NCH-R]₆ (8b, 8c), where R=1-pyrenyl (a), 9-anthracenyl (b), 9-phenanthryl (c) and 7-(N,N′-diethylamino)-3-coumarinyl (d). All of these compounds have been characterized by various analytical techniques including ³¹P{¹H} NMR spectroscopy. Compounds 1b, 2b, 3b, 4b, 5b, 5c and 6d have also been characterized by single crystal X-ray analysis. All of these phosphorus-supported compounds exhibit excellent fluorescence properties in aqueous solution at near physiological conditions.     

Synthesis and characterization of half-sandwich Rh, Ir complexes containing mono-thiolate-ortho-carborane ligand

Two binuclear complexes [Cp^∗M(Cl)Carb^S]₂ (Cp^∗ = η⁵-C₅Me₅, M = Rh (1a), Carb^S = SC₂(H)B₁₀H₁₀, Ir (1b)) were synthesized by the reaction of LiCarb^S with the dimeric metal complexes [Cp^∗MCl(μ-Cl)]₂ (M = Rh, Ir). Four mononuclear complexes Cp^∗M(Cl)(L)Carb^S (L = BuⁿPPh₂, M = Rh (2a), Ir (2b); L = PPh₃, M = Rh (4a), Ir (4b)) were synthesized by reactions of 1a or 1b with L (L = BuⁿPPh₂ (2); PPh₃ (4)) in moderate yields, respectively. Complexes 3a, 3b, 5a, 5b were obtained by treatment of 2a, 2b, 4a, 4b with AgPF₆ in high yields, respectively. All of these compounds were fully characterized by IR, NMR, and elemental analysis, and the crystal structures of 1a, 1b, 2a, 2b, 4a, 4b were also confirmed by X-ray crystallography. Their structures showed 3a, 3b and 5a, 5b could be expected as good candidates for heterolytic dihydrogen activation. Preliminary experiments on the dihydrogen activation driven by these half-sandwich Rh, Ir complexes were done under mild conditions.     

Preparation of phosphinoferrocene carboxamides from isocyanates. Synthesis and structural characterisation of palladium(II) and platinum(II) complexes with 1′-(diphenylphosphino)-1-(N-phenylcarbamoyl)ferrocene

The reaction of in situ generated 1′-(diphenylphosphino)-1-lithioferrocene with isocyanates RNCO affords the respective phosphino-carboxamides Ph₂PfcCONHR (fc = ferrocene-1,1′-diyl, R = cyclohexyl (2), and Ph (3)) in moderate yields. The coordination behaviour of 3 chosen as a representative was studied in palladium(II) and platinum(II) complexes. Depending on the metal precursor and the reaction conditions, the following compounds featuring this ligand as a P-monodentate or an O,P-chelating donor were isolated and characterised by spectroscopic methods (IR, multinuclear NMR and electrospray ionisation MS): trans-[PdCl₂(3-κP)₂] (5), trans-[PtCl₂(3-κP)₂] (6), cis-[PtCl₂(3-κP)₂] (7), [SP-4-4]-[(L^NC)PdCl(3-κP)] (8; L^NC = 2-[(dimethylamino-κN)methyl]phenyl-κC¹), and [SP-4-3]-[(L^NC)PdCl(3-κ²O,P)]SbF₆ (9). Besides, the crystal structures of a phosphine oxide resulting by oxidation of 2, viz Ph₂P(O)fcCONHCy (4), and of complexes 5·2Et₂O and 9 have been determined by single-crystal X-ray diffraction analysis.     

Fluorescent aminoarylcyclotetraphosphazenes

In the present work, octachlorocyclotetraphosphazatetraene (1), N₄P₄Cl₈, is reacted with aniline (2), 1-napthylamine (4) and 2-aminoanthracene (6) to give octakis(arylamino)cyclotetraphosphazenes (3, 5 and 7). These cyclotetraphosphazene compounds (3, 5 and 7) have been fully characterized by elemental analysis, mass (MS), FT-IR, ¹H and ³¹P NMR spectroscopies. The molecular and crystal structures of 5 have been characterized by X-ray crystallography. The structure of 5 is monoclinic with the space group P21/c. The octakis(1-napthylamino)-(5) and octakis(2-aminoanthracene)-(7) cyclotetraphosphazene compounds have been synthesised for the first time in this study. The fluorescence properties of 3, 5 and 7 have been investigated in tetrahydrofuran (THF) and have been shown to have highly fluorescence behavior. This work also presents the quenching of arylamino substituted cyclotetraphosphazene derivatives (3, 5 and 7) by p-benzoquinone (BQ) or hydroquinone (HQ).     

Phosphite ligands derived from distally and proximally substituted dipropyloxy calix[4]arenes and their palladium complexes: Solution dynamics, solid-state structures and catalysis

Two bisphosphite ligands, 25,27-bis-(2,2′-biphenyldioxyphosphinoxy)-26,28-dipropyloxy-p-tert-butyl calix[4]arene (3) and 25,26-bis-(2,2′-biphenyldioxyphosphinoxy)-27,28-dipropyloxy-p-tert-butyl calix[4]arene (4) and two monophosphite ligands, 25-hydroxy-27-(2,2′-biphenyldioxyphosphinoxy)-26,28-dipropyloxy-p-tert-butyl calix[4]arene (5) and 25-hydroxy-26-(2,2′-biphenyldioxyphosphinoxy)-27,28-dipropyloxy- p-tert-butyl calix[4]arene (6) have been synthesized. Treatment of (allyl) palladium precursors [(η³-1,3-R,R′-C₃H₄)Pd(Cl)]₂ with ligand 3 in the presence of NH₄PF₆ gives a series of cationic allyl palladium complexes (3a-3d). Neutral allyl complexes (3e-3g) are obtained by the treatment of the allyl palladium precursors with ligand 3 in the absence of NH₄PF₆. The cationic allyl complexes [(η³-C₃H₅)Pd(4)]PF₆ (4a) and [(η³-Ph₂C₃H₃)Pd(4)]PF₆ (4b) have been synthesized from the proximally (1,2-) substituted bisphosphite ligand 4. Treatment of ligand 4 with [Pd(COD)Cl₂] gives the palladium dichloride complex, [PdCl₂(4)] (4c). The solid-state structures of [{(η³-1-CH₃-C₃H₄)Pd(Cl)}₂(3)] (3f) and [PdCl₂(4)] (4c) have been determined by X-ray crystallography; the calixarene framework in 3f adopts the pinched cone conformation whereas in 4c, the conformation is in between that of cone and pinched cone. Solution dynamics of 3f has been studied in detail with the help of two-dimensional NMR spectroscopy.The solid-state structures of the monophosphite ligands 5 and 6 have also been determined; the calix[4]arene framework in both molecules adopts the cone conformation. Reaction of the monophosphite ligands (5, 6) with (allyl) palladium precursors, in the absence of NH₄PF₆, yield a series of neutral allyl palladium complexes (5a-5c; 6a-6d). Allyl palladium complexes of proximally substituted ligand 6 showed two diastereomers in solution owing to the inherently chiral calix[4]arene framework. Ligands 3, 6 and the allyl palladium complex 3f have been tested for catalytic activity in allylic alkylation reactions.     

Syntheses,characterizations and crystal structures of monomeric or macrocyclic compounds of di- or triorganotin (IV) moieties with 4,4′-thiodibenzenethiol

Six organotin compounds with 4,4′-thiodibenzenethiol (LH₂) of the type R_nSnL_4−nSnR_n (n = 3: R = Me 1, Ph 2, PhCH₂3, n = 2: R = Me 4, Ph 5, PhCH₂6) have been synthesized. All compounds were characterized by elemental analysis, IR and NMR (¹H, ¹³C, and ¹¹⁹Sn) spectra. The structures of compounds 1, 2, 4, 5 and 6 were also determined by X-ray diffraction analysis, which revealed that compounds 1 and 2 were monomeric structures, compounds 4, 5 and 6 were centrosymmetric dinuclear macrocyclic structures, and all the tin(IV) atoms are four-coordinated. Furthermore, supramolecular structures were also found in compounds 1, 2, 4, 5 and 6, which exhibit one-dimensional chains, two-dimensional networks or three-dimensional structures through intermolecular C–H?S weak hydrogen bonds (WHBs), non-bonded Sn?S interactions or C–H?π interactions.     

Self-assembly of di- and triorganotin(IV) complexes: Syntheses, characterization and crystal structures of 1D polymeric chain containing O,O-diethyl or O,O-diisopropyl phosphoric acid ligands

A series of organotin(IV) complexes with O,O-diethyl phosphoric acid (L¹H) and O,O-diisopropyl phosphoric acid (L²H) of the types: [R₃Sn · L]_n (L = L¹, R = Ph 1, R = PhCH₂2, R = Me 3, R = Bu 4; L = L², R = Ph 9, R = PhCH₂10, R = Me 11, R = Bu 12), [R₂Cl Sn · L]_n (L = L¹, R = Me 5, R = Ph 6, R = PhCH₂7, R = Bu 8; L = L², R = Me 13, R = Ph 14, R = PhCH₂15, R = Bu 16), have been synthesized. All complexes were characterized by elemental analysis, TGA, IR and NMR (¹H, ¹³C, ³¹P and ¹¹⁹Sn) spectroscopy analysis. Among them, complexes 1, 2, 3, 5, 8, 9 and 11 have been characterized by X-ray crystallography diffraction analysis. In the crystalline state, the complexes adopt infinite 1D infinite chain structures which are generated by the bidentate bridging phosphonate ligands and the five-coordinated tin centers.     

Synthesis, characterization, and reactivity of new types of constrained geometry group 4 metal complexes derived from picolyl-substituted dicarbollide ligand systems

The syntheses of group 4 metal complexes containing the picolyldicarbollyl ligand Dcab^PyH [nido-7-HNC₅H₄(CH₂)-8-R-7,8-C₂B₉H₁₀] (2) are reported. New types of constrained geometry group 4 metal complexes (Dcab^Py)MCl₂, [{(η⁵-RC₂B₉H₉)(CH₂)(η¹-NC₅H₄)}MCl₂] (M = Ti, 3; Zr, 4; R = H, a; Me, b), were prepared by the reaction of 2 with M(NMe₂)₂Cl₂ (M = Ti, Zr). The reaction of 2 with M(NMe₂)₄ in toluene afforded (Dcab^Py)M(NMe₂)₂, [{(η⁵-RC₂B₉H₉)(CH₂)(η¹-NC₅H₄)}M(NMe₂)₂] (M = Ti, 5; Zr, 6; R = H, a; Me, b), which readily reacted with Me₃SiCl to yield the corresponding chloride complexes (Dcab^Py)MCl₂ (M = Ti, 3; Zr, 4; R = H, a; Me, b). The structures of the diamido complexes (Dcab^Py)M(NMe₂)₂ (M = Ti, 5; Zr, 6) were established by X-ray diffraction studies of 5a, 5b, and 6a, which verified an η⁵:η¹-bonding mode derived from the dicarbollylamino ligand. Related constrained geometry catalyst CGC-type alkoxy titanium complexes, (Dcab^Py)Ti(OⁱPr)₂ (7), were synthesized by the reaction of 2 with Ti(OⁱPr)₄. Sterically less demanding phenols such as 2-Me-C₆H₄OH replaced the coordinated amido ligands on (Dcab^Py)Ti(NMe₂)₂ (5a) to yield aryloxy stabilized CGC complexes (Dcab^Py)Ti(OPh^Me)₂(Ph^Me  =  2- Me-C₆H₄, 8). NMR spectral data suggested that an intramolecular Ti-N coordination was intact in solution, resulting in a stable piano-stool structure with two aryloxy ligands residing in two of the leg positions. The aryloxy coordinations were further confirmed by single crystal X-ray diffraction studies on complexes (Dcab^Py)Ti(OPh^Me)₂ (8).     

Phosphorus-nitrogen compounds part 22. Syntheses, structural investigations, biological activities and DNA interactions of new mono and bis (4-fluorobenzyl) spirocyclophosphazenes

The reactions of hexachlorocyclotriphosphazene, N₃P₃Cl₆, with mono (1 and 2) and bis(4-fluorobenzyl) diamines (3-5), FPhCH₂NH(CH₂)_nNHR (RH or FPhCH₂-), produce mono (1a and 2a) and bis(4-fluorobenzyl) monospirocyclophosphazenes (3a-5a). The tetraaminomonospirocyclophosphazenes (1b-2d) are obtained from the reactions of the partly substituted phosphazenes (1a and 2a) with excess pyrrolidine, morpholine and 1,4-dioxa-8-azaspiro[4,5]decane (DASD), respectively. The tetrachlorobis(4-fluorobenzyl) monospirocyclophosphazenes (4a and 5a) with excess pyrrolidine, morpholine and DASD afford the fully substituted bis(4-fluorobenzyl) monospirocyclophosphazenes (4b, 4d-5d) in boiling THF. In addition, monochlorobis(4-fluorobenzyl) monospirocyclophosphazenes (4e and 4f) have also been isolated from the reactions with excess morpholine and DASD in boiling THF. The structural investigations of the compounds have been verified by elemental analyses, MS, FTIR, ¹H, ¹³C, ¹⁹F (for 1d and 2d), ³¹P NMR, HSQC and HMBC techniques. The crystal structures of 3a, 4a, 5a and 2b have been determined by X-ray crystallography. The compounds 2a-5a, 1b-2d, 4b, 4d-5d, 4e and 4f have been screened for antibacterial effects on bacteria and for antifungal activity against yeast strains. The compounds 1b and 4b showed antimicrobial activity against three species of bacteria, Bacillus subtilis, Bacillus cereus and Staphylococcus aureus, and two fungi, Candida albicans and Candida tropicalis. Minimum inhibitory concentrations (MIC) were determined for 1b and 4b. The MIC values were found to be 5000 μM for each bacteria. The most effective compound, 4b has exhibited activity with a MIC of 312 μM for C. albicans and 625 μM for C. tropicalis. DNA-binding and the nature of the interaction with pBR322 plasmid DNA are studied. All of the compounds induce changes on the DNA mobility and intensity. Prevention of HindIII digestion with the compounds indicates that the compounds bind with AT nucleotides in DNA.     

Triphenyl lead, tin and germanium coordination compounds derived from 9H-3-thia-1,4a,9-triaza-fluorene-2,4-dithione

Reactions of potassium 4-thioxo-3-thia-1,4a,9-triaza-fluorene-2-thiolate with Ph₃PbCl, Ph₃SnCl and Ph₃GeCl provided the corresponding metal pentacoordinated compounds 2-4. Addition of THF afforded their hexacoordinated derivatives (5-7). Adducts of 2 and 3 with DMSO (8, 10), pyridine (9, 11), Ph₃PO (12, 14) CH₃OH (13, 15), respectively were synthesized. Compound 2 afforded the H₂O adduct (16). In all cases the metal atom is chelated by the ligand through a covalent bond with S2 and a coordination bond with N1 forming four membered rings. Compounds were identified by ¹H, ¹³C, ¹⁵N, ¹¹⁹Sn and ²⁰⁷Pb. X-ray diffraction structures of 2, 3, 8, 9, 11, 14 and 16 were obtained.     

Hydro- and chloro-substituted silyl- and silyl-η-amido-η-tetramethylcyclopentadienyl titanium complexes

Chlorosilyl-cyclopentadienyl titanium precursors [Ti(η⁵-C₅Me₄SiMeXCl)Cl₃] (X=H 2, Cl 3) were prepared by reaction of TiCl₄ with the trimethylsilyl derivatives of the corresponding cyclopentadienes. Methylation of these compounds with MgClMe under appropriate conditions afforded the methyl complexes [Ti(η⁵-C₅Me₄SiMe₂R)XMe₂] (R=H, X=Cl 5, Me 6; R=X=Me 7). Reactions of 2 and 3 with two equivalents of LiNH^tBu afforded the ansa-silyl-η-amido compounds [Ti{η⁵-C₅Me₄SiMeX(η¹-N^tBu)}Cl₂] (X=H 8, Cl 9). Methylation of 8 gave [Ti{η⁵-C₅Me₄SiMeH(η¹-N^tBu)}Me₂] 10. Complex 9 was also obtained by reaction of 8 with BCl₃, whereas the same reaction using alternative chlorinating agents (TiCl₄, HCl) resulted in deamidation to give 2, which was also converted into 3 by reaction with BCl₃. All of the new compounds were characterized by NMR spectroscopy and the molecular structures of 2 and 4 were determined by X-ray diffraction methods.     

Electronic and steric effects of substituents on the conformational diversity and hydrogen bonding of N-(4-X-phenyl)-N′,N″-bis(piperidinyl) phosphoric triamides (X = F, Cl, Br, H, CH3): A combined experimental and DFT study

Phosphoric triamides of the general formula (4-X-C₆H₄NH)P(O)(NC₅H₁₀)₂, X = F (1), Cl (2), Br (3), H (4) and CH₃ (5), have been synthesized and characterized. X-ray crystallography at 120 K reveals that the compounds 1, 3, 4·H₂O and 5 are composed of one, four, two and four conformers, respectively. DFT calculations were performed to investigate the electronic structures of the compounds. The X-ray data and DFT calculations revealed that the conformational diversity in these compounds is mainly governed by the steric effects of the substituent X rather than by electronic effects. Although substituent X does not participate directly in hydrogen bonding, the crystal packing of the compounds is influenced by the size of X. Atoms in molecules (AIM) and natural bond orbital (NBO) analyses confirm that the para substituent X has no significant effect on the electronic features of the amidic proton and the phosphoryl oxygen atom (O_P). Using X-ray crystallography, AIM and NBO analyses, the structural and electronic aspects of inter- and intramolecular hydrogen bonds of the compounds have been studied. The charge density (ρ) at the bond critical point (bcp) of the N-H bond decreases from the fully optimized monomers to their corresponding hydrogen bonded clusters. The N-H stretching frequency decreases from the calculated values to the experimental results.     

Syntheses, characterization and crystal structures of di- and triorganotin (IV) derivatives with 6-amino-1,3,5-triazine-2,4-dithiol

A series of organotin (IV) complexes with 6-amino-1,3,5-triazine-2,4-dithiol of the type [(R_nSnCl_4−n)₂ (C₃H₂N₄S₂)] (n = 3: R = Me 1, n-Bu 2, PhCH₂3, Ph 4; n = 2: R = Me 5, n-Bu 6, PhCH₂7, Ph 8) have been synthesized. All the complexes 1-8 have been characterized by elemental analysis, IR, ¹H and ¹³C NMR spectra. Among them complexes 1, 4, 5 and 8 have also been characterized by X-ray crystallography diffraction analyses, which revealed that the tin atoms of complexes 1, 4, 5 and 8 are all five-coordinated with distorted trigonal bipyramid geometries.     

Synthesis, characterizations and crystal structures of di-n-butyltin(IV) complexes with heteroatomic (N, O or S) acid

Two types of di-n-butyltin(IV) complexes {[ⁿBu₂Sn(O₂CR)]₂O}₂ · L 1-4 and ⁿBu₂Sn(O₂CR)₂Y 5-8 (when L=H₂O, R=2-pyrazine 1; L=0, R=2-pyrimidylthiomethylene 2, 1-naphthoxymethylene 3; L=C₆H₆, R=2-naphthoxymethylene 4; when Y=H₂O, R=2-pyrazine 5; Y=0, R=2-pyrimidylthiomethylene 6, 1-naphthoxymethylene 7, 2-naphthoxymethylene 8) have been prepared in 1:1 or 1:2 molar ratios by reactions of di-n-butyltin oxide with the heteroatomic (N, O or S) carboxylic acids. The complexes 1-8 are characterized by elemental, IR, ¹H and ¹³C NMR spectra. And except for complexes 6 and 7, the complexes 1-5 and 8 are also characterized by X-ray crystallography diffraction analyses, which reveal that the tin atom of complex 5 is seven-coordinated, while the complexes 1-4 and 8 are all hexa-coordinated. The nitrogen atom of the aromatic ring in complexes 1 and 5 participates in the interactions with the Sn atom.     

The influence of alkane spacer of bis(diphenylphosphino)alkanes on the nuclearity of silver(I): Syntheses and structures of P,P′-bridged clusters and coordination polymers involving dithiophosphates

The effect of the length of alkane spacer in diphosphines on the nuclearity of Ag(I) complexes containing dialkyl dithiophosphates (dtp) ligands has been investigated. 1,1-Bis(diphenylphosphino)methane (dppm) yielded tetranuclear [Ag₄(dppm)₂{S₂P(OEt)₂}₄] (1), [Ag₄(dppm)₂{S₂P(OⁱPr)₂}₄] (3), trinuclear [Ag₃(dppm)₃{S₂P(OEt)₂}₂](PF₆) (2), and a dinuclear [Ag₂(dppm)₂{S₂P(OⁱPr)}](PF₆) (4). The increase in spacer length from one methylene in dppm to two in 1,2-bis(diphenylphosphino)ethane (dppe) resulted in the formation of polymeric, [Ag(dppe){S₂P(OR)₂}]_∞ (R = Et, 5a and 5a′; ⁱPr, 5b), and [Ag₄(μ₃-Cl)(dppe)_1.5{S₂P(OR)₂}₃]_∞ (R = Et, 6a; ⁱPr, 6b). Compounds 5a, 5b, 6a and 6b were reported earlier [C.W. Liu, B.-J. Liaw, L.-S. Liou, J.-C. Wang, Chem. Commun. (2005) 1983]. Further increase in the chain length to four methylene units in 1,4-bis(diphenylphosphino)butane (dppb) yielded dppb-bridged polymers, [Ag(dppb){S₂P(OEt)₂}]_∞ (7) and [Ag₂(dppb){S₂P(OEt)₂}₂]_∞ (8). In all the polynuclear compounds, diphosphines acted as P,P′-bridging ligands, while the dtp ligands (S,S′-donors) adopted varieties of coordination patterns: S,S′-chelating (5, 7), S,S′-bridging (4), bimetallic-triconnective, μ₂:η²,η¹ (1, 3, 8), bimetallic-diconnective, μ₂:η² (2, 3) and trimetallic-triconnective, μ₃:η²,η¹ (6). Some of the complexes exhibit argentophilicity with Ag?Ag distances in the range, 2.918-3.360 Å. Concomitant bridging of two silver atoms either by dppm and dtp ligands (1, 3 and 4) or two dtp ligands (8) lead to close silver-silver contacts. The diphosphines (dppe and dppb) with longer spacer appeared to favor 1D or 2D polymers due to the flexibility of the spacer within the diphosphine unit by adopting anti conformation as opposed to syn conformation of the dppm linker is revealed in complexes.