Synthesis and characterization of difunctional blue light-emitting molecules containing hole-transporting triphenylamino units

The synthesis of new difunctional (i.e., light-emitting and hole-transporting) fluorophore molecules, 2,2′-difuryl-4,4′-(N,N,N′,N′-tetraphenyl)diaminobiphenyl and 5,5′-bis(4-N,N′-diphenylaminophenyl)-2,2′-bifuryl, which contain hole-transporting triphenylamino units, are reported. These difunctional molecules emit intense blue photoluminescence and further reveal high HOMO energy values as well as high glass transition temperatures.     

An efficient synthesis of 5,5′-diaryl-2,2′-bichalcophenes

A convenient and high yielding synthesis of 5,5′-diaryl-2,2′-bichalcophenes (furans, thiophenes, and selenophenes) by the hexabutylditin-mediated homocoupling of 5-bromochalcophenes is described. This approach has been applied to the synthesis of the blue-light-emitting compound 5,5′-bis(4-aminophenyl)-2,2′-bifuryl (PFDA).     

A new series of potentially hexadentate ligands derived from 2,2′-bipyridine

Reaction of 2,2′-bipyridine-6-carboxaldehyde with the appropriate aliphatic diamine in MeOH and subsequent reduction with NaBH₄ gives the new, potentially hexadentate, ligands N,N′-bis(2,2′-bipyridin-6-ylmethyl)ethane-1,2-diamine (bmet), N,N′-bis(2,2′-bipyridin-6-ylmethyl)propane-1,3-diamine (bmpp) and N,N′-bis(2,2′-bipyridin-6-ylmethyl)hexane-1,6-diamine (bmhx). The syntheses and characterisation of these ligands are reported; the ligands are isolated as the hydrochloride salts, with purification effected by either recrystallisation or cation exchange chromatography. [Co(bmet)](ClO₄)₃ · H₂O is obtained on reaction of bmet · 4.25HCl · 2.5H₂O with Na₃[Co(O₂CO)₃] · 3H₂O, and X-ray structural analysis shows this to have a pair of very short Co–N bonds. The synthesis and characterisation of the first coordination complex containing 6-(aminomethyl)-2,2′-bipyridine (amb) is also described.     

Solid-phase synthesis of 2,6- and 2,7-diamino-4(3H)-quinazolinones via palladium-catalyzed amination

A new procedure for the solid-phase synthesis of 2,6- and 2,7-diamino-4(3H)-quinazolinones is described. The method involves coupling of 2,4,6- and 2,4,7-trichloroquinazoline to a solid support via benzyl alcohol type linkers, subsequent displacement of chlorine at C-2 then at the C-6 or C-7 positions by amines (Fig. 1) and the cleavage of the products from the resin. The palladium-catalyzed amination of C-6 and C-7 positions with a representative set of amines in the presence of 2-(di-t-butylphosphino)biphenyl (DTBPBP), P(t-Bu)₃ and 2,2′-bis(diphenylphosphino)-1,1′-binaphthyl (BINAP) ligands has been investigated. This method should prove to be a useful tool for constructing combinatorial libraries containing the 4(3H)-quinazolinone moiety.     

New Pd-NHC-complexes for the Mizoroki-Heck reaction

The synthesis and structural characterization of novel chelating N-aryl substituted palladium(II)-biscarbene-complexes is reported: 1,1′-bis(4-bromophenyl)-3,3′-methylene-diimidazoline-2,2′-diylidene-palladium(II)-dibromide, 1,1′-bis(4-methoxyphenyl)-3,3′-methylene-diimidazoline-2,2′-diylidene-palladium(II)-dibromide and 1,1′-bis(4-n-butoxyphenyl)-3,3′-methylenediimidazoline-2,2′-diylidene-palladium(II)-dibromide have been synthesized in good yields. The catalytic activity of these 1,1′-aryl-3,3′-methylenediimidazoline-2,2′-diylidene-palladium(II)-dihalogenide complexes was tested for the Mizoroki-Heck reaction in comparison to 1,1′-(bis)methyl-3,3′-methylenediimidazoline-2,2′-diylidene-palladium(II)-dihalogenide complexes and to 1,1′-bis(phenyl)-3,3′-methylene-diimidazoline-2,2′-diylidene-palladium(II)-dibromide. The activity of the aryl substituted catalysts is significantly higher compared to the methyl substituted NHC complexes. They also allow the coupling of arylchlorides with olefins.     

Mono- and di-t-butyl substituted 2,2′-bis(1,3-dithia[3]ferrocenophane-2-ylidene) derivatives: TTF-like ferrocene analogs

Mono- and di-t-butyl substituted 2,2′-bis(1,3-dithia[3]ferrocenophane-2-ylidene) derivatives were prepared. These derivatives showed the E_1/2(1) in lower potential region than that of differrocenyl-ethene and -ethyne. Also, the ΔE_1/2 value declined according to the increase of a t-butyl group.     

New optically active organoantimony (BINASb) and bismuth (BINABi) compounds comprising a 1,1′-binaphthyl core: synthesis and their use in transition metal-catalyzed asymmetric hydrosilylation of ketones

Racemic 2,2′-bis[diarylstibano]-1,1′-binaphthyls [(±)-BINASbs] and 2,2′-bis[di(p-tolyl)bismuthano]-1,1′-binaphthyl [(±)-BINABi], which are the antimony and bismuth congeners of BINAP, have been prepared from 2,2′-dibromo-1,1′-binaphthyl (DBBN) via 2,2′-dilithio-1,1′-binaphthyl intermediate by treatment with the appropriate metal halides [(p-Tol)₂SbBr, Ph₂SbBr and (p-Tol)₂BiCl]. The optical resolution of the (±)-BINASbs could be achieved via the separation of a mixture of the diastereomeric Pd-complexes derived from the reaction of (±)-BINASbs with di-μ-chlorobis{(S)-2-[1-(dimethylamino)-ethyl]phenyl-C¹,N}dipalladium(II). Optically active (R)-BINASb and (R)-BINABi could be also obtained from optically active (R)-DBBN by the same procedure. The enantiopure BINASbs have been shown to be effective chiral ligands for the rhodium-catalyzed asymmetric hydrosilylation of ketones.     

Preparation and oxidative coupling of bis[o-(hydrosilyl)phenyl]cuprates and bis[o-(fluorosilyl)phenyl]cuprates

Bis[o-(hydrosilyl)phenyl]cuprates and bis[o-(fluorosilyl)phenyl]cuprates were prepared by reacting [o-(hydrosilyl)phenyl]lithiums and [o-(fluorosilyl)phenyl]lithiums, respectively, with copper salts, such as CuCN and Cu(OPiv)₂. The phenylcuprates underwent oxidative coupling to afford 2,2′-bis(hydrosilyl)biphenyls and 2,2′-bis(fluorosilyl)biphenyls.     

Intermetallic communication through a 1,3,5-triethynylbenzene connector

The electrochemical behavior of two series of homo- and heterometallic 1,3,5-triethynylbenzene-based transition metal complexes containing [(η²-dppf)(η⁵-C₅H₅)Ru], [(PPh₃)₂(η⁵-C₅H₅)Os], [(^tBu₂bpy)(CO)₃Re], and [(bpy)(CO)₃ClRe] (dppf = 1,1′-bis(diphenylphosphino)ferrocene; ^tBu₂bpy = 4,4′-di-tert-butyl-2,2′-bipyridyl; bpy = 2,2′-bipyridyl-5-yl) building blocks have been studied, showing that there is electronic interaction between the appropriate metal atoms. The electronic absorption spectra reveal high energy bands corresponding to intraligand π → π∗ transitions (bpy, alkynyl) and low energy absorptions which are attributed to MLCT transitions; replacement of ruthenium by osmium results in a blue-shift of the MLCT bands. The associated radical cations of three complexes were in situ generated by chemical oxidation and characterized by continuous wave electron paramagnetic resonance (EPR) investigations in X-band performed at low temperatures.     

S-Transalkylation/ring closing metathesis as a route to azathiamacrocycles incorporating 2,2′-bipyridine subunits

A new route to cyclophanes 6a,b incorporating 2,2′-bipyridine subunits has been elaborated using as the key steps (1) S-transalkylation of 6,6′-bis(methylsulfanyl)-2,2′-bipyridines 2a,b with ethyl bromoacetate resulting in the formation of 6,6′-bis[(ethoxycarbonyl)methylsulfanyl]-2,2′-bipyridines 3a,b and (2) ring-closing metathesis of the corresponding alkenyl ethers 5a,b.     

Mirabiquinone,a new unsymmetrical binaphthoquinone from the sea urchin Scaphechinus mirabilis

Mirabiquinone [7,5′-anhydroethylidene-6,6′-bis(2,3,7-trihydroxynaphthazarin)], a new unsymmetrical binaphthoquinone, was isolated from the sea urchin Scaphechinus mirabilis along with the known symmetrical binaphthoquinones ethylidene-6,6′-bis(2,3,7-trihydroxynaphthazarin) and 7,7′-anhydroethylidene-6,6′-bis(2,3,7-trihydroxynaphthazarin). The structure of mirabiquinone was established using ¹H NMR, ¹³C NMR, HSQC and HMBC data, along with a spectroscopic analysis of its pentamethoxy derivative. Mirabiquinone and the symmetrical binaphthoquinones demonstrated excellent scavenging of the 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical.     

Facile and catalytic degradation method of DDT using Pd/C-Et3N system under ambient pressure and temperature

The catalytic degradation method of p,p′-DDT [1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane] and its regioisomer o,p′-DDT [1,1,1-trichloro-2-(o-chlorophenyl)-2-(p-chlorophenyl)ethane] using the Pd/C-Et₃N system under ambient hydrogen pressure and temperature was established. The presence of Et₃N was necessary for the quick and complete breakdown of DDT. The independent degradation study of two intermediates, p,p′-DDD [2,2-bis(p-chlorophenyl)-1,1-dichloroethane] and p,p′-DDE [2,2-bis(p-chlorophenyl)-1,1-dichloroethylene] using GC-MS let us to speculate the degradation pathway of p,p′-DDT. In the initial phase of the reaction, p,p′-DDT degradation splits into two ways: a dehydrochlorination pathway and a hydrodechlorination pathway. In each pathway, reaction starts from an aliphatic moiety and subsequent hydrodechlorination from the benzene moieties takes place in a stepwise manner. The former pathway leads to the formation of 1,1-diphenylethane and the latter leads to the formation of 1,1-dichloro-2,2-diphenylethane. These diphenylethane analogs, which are less toxic compared with p,p′-DDT, are terminal degradation products in our system. The distinctive features of our catalytic degradation method of DDTs are reliability, simplicity, efficiency, and inexpensiveness.     

(R)-6,6′-Bis(trifluoromethanesulfonyl)-2,2′-dihydroxy-1,1′-binaphthyl: a new ligand for asymmetric synthesis

The new (R)-6,6′-bis(trifluoromethanesulfonyl)-2,2′-dihydroxy-1,1′-binaphthyl (1) has been synthesized and proved to generate highly active zirconium-based catalysts for asymmetric Mannich-type reactions.     

An approach to the synthesis of chemically modified bisazocalix[4]arenes and their extraction properties

Bisazocalix[4]arenes [N,N′-bis(5-azo-25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene)benzene (1), N,N′-bis(5-azo-25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene)biphenyl (2) and N,N′-bis(5-azo-25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene)-2,2′-dinitro biphenyl (3)] have been synthesized from 25,26,27-tribenzoyloxy-28-hydroxycalix[4]arene by diazocoupling with the corresponding aromatic diamines (p-phenylenediamine, 4,4′-diamino biphenyl and 4,4′-diamino-2,2′-dinitrobiphenyl). Extraction studies of bisazocalix[4]arenes 1, 2, and 3 show no difference in their extraction behavior and selectivity, whereas azocalix[4]arenes are a poor extractant for heavy metal cations. The absorption spectra of the prepared bisazocalix[4]arenes are discussed, both the effect of varying pH and solvent upon the absorption ability of bisazocalix[4]arenes.     

Electrochemical ELISA for the screening of DDT related compounds: analysis in waste waters

An electrochemical enzyme-linked immunosorbent assay (ELISA) for the detection of 1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane (p,p′-DTT), 1,1-dichloro-2,2-bis(p-chlorophenyl)ethylene (p,p′-DDE), 1,1-dichloro-2,2-bis-(4-chlorophenyl)ethane (p,p′-DDD) and o,p-DDT was developed. Optimization of the ELISA competition conditions, led to similar response for the p,p′-isomers. The activity of the label enzyme (horseradish peroxidase) was measured electrochemically using 3,3′,5,5′-tetramethylbenzidine as substrate. The use of purified antiserum for p,p′-DDT resulted in a sensitive assay with a detection limit of 40 pg ml⁻¹ and R.S.D. ranging from 1 to 3% intra-day and 3 to 6% inter-day. No matrix effect for waste water samples of different origin has been evidenced. The ELISA was used to detect DDTs in 20 samples after extraction in diethylether. This method appears suitable for routine screening of DDTs without sample pre-treatment other than dilution in PBS or after organic solvent extraction if high sensitivity is required.     

Effect of adding new phosphazene compounds to poly(butylene terephthalate)/polyamide blends. II: Effect of different polyamides on the properties of extruded samples

Poly(butylene terephthalate) (PBT) and a sample of polyamide have been melt processed in the presence of two new phosphazene compounds, namely 2,2-dichloro-4,4,6,6-bis[spyro(2′,2″-dioxy-1′,1″-biphenyl)]cyclotriphosphazene (2Cl-CP) and 2,2-bis(2-methoxy-4-methyleneoxy-phenoxy)-4,4,6,6-bis[spyro(2′,2″-dioxy-1′,1″-biphenyl)]cyclophosphazene (CP-2EPOX).The blends were prepared by using polyamide 6 (PA6) and polyamide 6,6 (PA66) in 25/75 and 75/25 w/w compositions by using a co-rotating twin-screw extruder.The materials have been completely characterized from a mechanical, rheological, and morphological point of view. The results indicate that the additives used cause an increase of the rupture properties and of the viscosity, especially in the PA6 rich blends containing CP-2EPOX. This result can be not only attributed to a chain extension effect on the PA phase but also to in situ formation of PA/PBT copolymers promoted by the presence of the CP compound as confirmed by NMR and MALDI-TOF analyses. The compatibilization effect fades in blends containing PA66, probably due to a thermal deactivation of the additives at higher temperature required to process this polymer.     

Dendritic BINOL ligands for asymmetric catalysis: effect of the linking positions and generations of the dendritic wedges on catalyst properties

Three types of new chiral BINOL ligands (2, 3 and 4) bearing dendritic wedges have been synthesized through coupling reaction between 3-hydroxymethyl-2,2′-bis(methoxymethyl)-1,1′-binaphthol (7), 6,6′-dihydroxymethyl-2,2′-bis(methoxymethyl)-1,1′-binaphthol (12), 6-hydroxymethyl-2,2′-bis(methoxymethyl)-1,1′-binaphthol (15) and Fréchet-type polyether dendritic benzyl bromide, followed by deprotection of methoxymethyl groups by ⁱPrOH/HCl, respectively. These new ligands obtained were assessed in enantioselective Lewis acid-catalyzed addition of diethylzinc to benzaldehyde. Compared to the enantioselectivity observed with dendrimer 1 bearing the dendritic wedges at 3,3′-positions of the binaphthyl backbone, higher enantioselectivity for all these ligands was observed. Difference in the effect of linking positions and generations on enantioselectivity and/or activity for all three kinds of dendritic ligand-derived catalysts was observed. Among these dendritic ligands, (R)-3/Ti(IV) catalyst with the dendritic wedges at 6,6′-positions of BINOL gave the highest enantioselectivity (up to 87% ee).     

First nucleophilic addition of acetylide to 1,3-diketonate anions: reaction of 1-aryl-4,4,4-trifluorobutane-1,3-diones with sodium acetylide

The nucleophilic addition of sodium acetylide to 1,3-diketonates derived from 1-aryl-4,4,4-trifluorobutane-1,3-diones is reported. Tertiary 1,4-alkynediols containing CF₃ and aroylmethyl groups are synthesized. 5,5′-Diaryl-3,3′-bis(trifluoromethyl)-2,2′-bifurans are prepared via a novel double cyclization of these alkynediols.     

Synthetic, spectral and catalytic activity studies of ruthenium bipyridine and terpyridine complexes: Implications in the mechanism of the ruthenium(pyridine-2,6-bisoxazoline)(pyridine-2,6-dicarboxylate)-catalyzed asymmetric epoxidation of olefins utilizing H2O2

Various Ru(L₁)(L₂) (1) complexes (L₁ = 2,2′-bipyridines, 2,2′:6′,2″-terpyridines, 6-(4S)-4-phenyl-4,5-dihydro-oxazol-2-yl-2,2′-bipyridinyl or 2,2′-bipyridinyl-6-carboxylate; L₂ = pyridine-2,6-dicarboxylate, pyridine-2-carboxylate or 2,2′-bipyridinyl-6-carboxylate) have been synthesized (or in situ generated) and tested on epoxidation of olefins utilizing 30% aqueous H₂O₂. The complexes containing pyridine-2,6-dicarboxylate show extraordinarily high catalytic activity. Based on the stereoselective performance of chiral ruthenium complexes containing non-racemic 2,2′-bipyridines including 6-[(4S)-4-phenyl-4,5-dihydro-oxazol-2-yl]-[2,2′]bipyridinyl new insights on the reaction intermediates and reaction pathway of the ruthenium-catalyzed enantioselective epoxidation are proposed. In addition, a simplified protocol for epoxidation of olefins using urea hydrogen peroxide complex as oxidizing agent has been developed.     

New fluorinated aromatic poly(ether-amide)s derived from 2,2′-bis(3,4,5-trifluorophenyl)-4,4′-diaminodiphenyl ether and various dicarboxylic acids

A new class of highly fluorinated aromatic poly(ether-amide)s was prepared through triphenyl phosphite-activated polycondensation of 2,2′-bis(3,4,5-trifluorophenyl)-4,4′-diaminodiphenyl ether (FPAPE) and four dicarboxylic acid comonomers. All the resulting polymers were thoroughly characterized by FT-IR, UV, and NMR spectroscopic methods. The effects of the fluorine atoms directly linked to the lateral phenyl rings as well as fluoro-containing phenyl groups attached to the macromolecular chains on some properties of the polymers were investigated by comparing with poly(ether-amide)s prepared from 4,4′-oxydianiline (4,4′-ODA) and 2,2′-diphenyl-4,4′-diaminodiphenyl ether (PAPE). The FPAPE-derived polymers exhibited excellent solubility in a variety of organic solvents. Results obtained from X-ray studies showed that the presence of the bulky fluoro-containing phenyl groups attached to the chains disrupts their structural order in a great amount, and leads to a decrease in crystallinity extent of the macromolecules. Furthermore, the highly fluorinated polymeric chains showed a significant enhancement in organo-solubility, heat-stability and T_g values when compared to their non-fluorinated counterparts.