Experimental investigation of flow boiling heat transfer enhancement under ultrasound fields in a minichannel heat sink

Ultrasound is considered to be an effective active heat transfer enhancement method, which is widely used in various fields. But there is no clear understanding of flow boiling heat transfer characteristics in micro/mini-channels under ultrasonic field since the studies related are limited up to now. In this paper, a novel minichannel heat exchanger with two ultrasonic transducers inside the inlet and outlet plenum respectively is designed to experimentally investigate the impacts of ultrasound on flow boiling heat transfer enhancement in a minichannel heat sink. Flow visualization analyses reveal that ultrasound can promote rapid bubble motion, bubble detachment from heating wall surface and thereby new bubble generation, and decrease the length of confined bubble. Furthermore, the flow boiling experiments are initiated employing working fluid R141b at different ultrasonic parameters (e.g., frequency, power, angle of radiation) and heat flux under three types of ultrasound excitations: no ultrasound (NU), single inlet ultrasound (IU), inlet and outlet ultrasound (IOU). The results indicate that ultrasound has obvious augmentation effects on flow boiling heat transfer even though the intensification effects will be limited with the heat flux increases. The higher ultrasonic power, the lower ultrasonic frequency and the higher ultrasonic radiation angle, the better intensification efficiency. The maximum enhancement ratio of h_ave in the saturated boiling section reaches 1.88 at 50 W, 23 kHz and 45° under the experimental conditions. This study will be beneficial for future applications of ultrasound on flow boiling heat transfer in micro/mini-channels.     

超声造影剂微泡非线性动力学响应的机理及相关应用

随着生命科学及现代医学的发展, 一体化无创精准诊疗已经日益成为人们关注的焦点问题, 而关于超声造影剂微泡的非线性效应的相关机理、动力学建模及其在超声医学领域中的应用研究也得到了极大的推动. 本文对下列课题进行了总结和讨论, 包括: 1)基于Mie散射技术和流式细胞仪对造影剂微泡参数进行定征的一体化解决方案; 2)通过对微泡包膜的黏弹特性进行非线性修正, 构建新的包膜微泡动力学模型; 3)探索造影剂惯性空化阈值与其包膜参数之间的相关性; 以及4)研究超声联合造影剂微泡促进基因/药物转染效率并有效降低其生物毒性的相关机理.     

Sonochemical reactions at 640 kHz using an efficient reactor. Oxidation of potassium iodide

Ultrasound can be used to oxidize aqueous pollutants. However, due to economic reasons higher oxidation/destruction rates and higher energy efficiency are needed. Recent studies suggest that the higher ultrasound frequencies provide better oxidation rates than the conventional 20 kHz. Another area for improvement is reactor configuration. We have tested two new reactor configurations with proper focusing and reflection of ultrasound for maximum utilization. Reactor configuration plays an important role in the overall efficiency. In the new reactors, transducers and reaction mixture are separated by a polymer acoustic window which allows efficient transfer of ultrasound energy and not the heat from the transducer to the reaction mixture. One reactor at 640 kHz provides a 100% enhancement over the best reported rate for the oxidation of potassium iodide, on a per-Watt basis. Experiments conducted at varying initial KI concentrations show interesting behavior. Increasing the KI concentration by over eight fold merely increases the iodine production rate by two fold. This suggests that in the oxidation region surrounding the bubble, the KI concentration is much different than in the bulk. It is proposed that the hydrophobic bubble region has lower and near saturation KI concentration.     

流体控制方程的超声空化泡动力学模拟*

本文基于流体动力学控制方程和VOF模型,在FLUENT 14.5软件环境下对超声空化泡进行数值模拟。首先研究了超声空化泡一个周期内的形态变化,并且利用空化泡形态变化的最大面积、最小面积、膨胀时间、收缩时间等数值结果分析超声参数对空化效果的影响。同时探究了双频超声作用下空化泡运动的变化,计算结果表明:在其他条件相同的情况下,在1~5MPa范围内,超声声压幅值为3MPa时空化效果最好;当超声频率大于20kHz时,空化效果随着超声频率的增大而降低。对于频率相同的双频超声,较声压幅值为其两倍的单频超声有更好的空化效果;对于频率不同的双频超声,空化效果受到频率差的影响。     

Suppressing chaotic oscillations of a spherical cavitation bubble through applying a periodic perturbation

Nonlinear dynamics of a spherical cavitation bubble was studied. A method based on applying a periodic perturbation to suppress chaotic oscillations is introduced. The relation between this method and dual frequency ultrasonic irradiation is correlated to prove its applicability in applications involving cavitation phenomena. Results indicated its strong impact on reducing the chaotic oscillations to regular ones. The governing parameters are the secondary frequency value and the phase difference between the secondary frequency and the fundamental one. In the end, the possible application of this method in high intensity focused ultrasound tumor ablation as an instance, is discussed accounting for both free bubbles and microbubbles.     

超声激发声信号幅值实时监测HIFU焦域组织损伤*

聚焦超声消融肿瘤过程中的损伤实时监测是临床治疗面临的一个关键难题,双频聚焦超声不仅能提高治疗效率,且能在共焦区域激发出声信号,该声信号的幅值、频率等信息与焦域组织的机械和声学特性紧密相关。本文构建了一种双频聚焦超声治疗及组织损伤实时监测系统。该系统在聚焦超声辐照离体组织过程中,通过外部水听器接收双频激发的组织声发射信号,并通过上位机进行高速数据采集、数字滤波、时频处理等,分析声发射信号幅值与离体组织损伤之间的变化规律。实验研究结果表明：随着焦域组织损伤的形成,其弹性等声学特征发生改变,导致声发射信号幅值逐渐降低,表明声发射信号幅值的变化可较好地反映靶组织声学特征和结构的变化,从而实现聚焦超声治疗中靶组织损伤的实时监测。本文提出的监测方案相比传统超声影像监控更灵敏,有望为聚焦超声临床治疗中的组织损伤监控提供一种新的实时监测方案和手段。     

Modeling of interaction between therapeutic ultrasound propagation and cavitation bubbles

In medical applications of high intense focused ultrasound the mechanism of interaction between ultrasound waves and cavitation bubbles is responsible for several therapeutic effects as well as for undesired side effects. Based on a two-phase continuum approach for bubbly liquids, in this paper a numerical model is presented to simulate these interactions. The numerical results demonstrate the influence of the cavitation bubble cloud on ultrasound propagation. In the case of a lithotripter pulse an increased bubble density leads to significant changes in the tensile part of the pressure waveform. The calculations are verified by measurements with a fiber optical hydrophone and by experimental results of the bubble cloud dynamics.     

The impact of methanol mass transport on its conversion for the production of hydrogen and oxygenated reactive species in sono-irradiated aqueous solution

This study aims principally to assess numerically the impact of methanol mass transport (i.e., evaporation/condensation across the acoustic bubble wall) on the thermodynamics and chemical effects (methanol conversion, hydrogen and oxygenated reactive species production) of acoustic cavitation in sono-irradiated aqueous solution. This effect was revealed at various ultrasound frequencies (from 213 to 1000 kHz) and acoustic intensities (1 and 2 W/cm²) over a range of methanol concentrations (from 0 to 100%, v/v). It was found that the impact of methanol concentration on the expansion and compression ratios, bubble temperature, CH₃OH conversion and the molar productions inside the bubble is frequency dependent (either with or without consideration of methanol mass transport), where this effect is more pronounced when the ultrasound frequency is decreased. Alternatively, the decrease in acoustic intensity decreases clearly the effect of methanol mass transport on the bubble sono-activity. When methanol mass transfer is eliminated, the decrease of the bubble temperature, CH₃OH conversion and the molar yield of the bubble with the rise of methanol concentration was found to be more amortized as the wave frequency is reduced from 1 MHz to 213 kHz, compared to the case when the mass transport of methanol is taken into account. Our findings indicate clearly the importance of incorporating the evaporation and condensation mechanisms of methanol throughout the numerical simulations of a single bubble dynamics and chemical activity.     

Effects of acoustic parameters on bubble cloud dynamics in ultrasound tissue erosion (histotripsy)

High intensity pulsed ultrasound can produce significant mechanical tissue fractionation with sharp boundaries ("histotripsy"). At a tissue-fluid interface, histotripsy produces clearly demarcated tissue erosion and the erosion efficiency depends on pulse parameters. Acoustic cavitation is believed to be the primary mechanism for the histotripsy process. To investigate the physical basis of the dependence of tissue erosion on pulse parameters, an optical method was used to monitor the effects of pulse parameters on the cavitating bubble cloud generated by histotripsy pulses at a tissue-water interface. The pulse parameters studied include pulse duration, peak rarefactional pressure, and pulse repetition frequency (PRF). Results show that the duration of growth and collapse (collapse cycle) of the bubble cloud increased with increasing pulse duration, peak rarefactional pressure, and PRF when the next pulse arrived after the collapse of the previous bubble cloud. When the PRF was too high such that the next pulse arrived before the collapse of the previous bubble cloud, only a portion of histotripsy pulses could effectively create and collapse the bubble cloud. The collapse cycle of the bubble cloud also increased with increasing gas concentration. These results may explain previous in vitro results on effects of pulse parameters on tissue erosion.     

Influence of ultrasound on adsorption processes.

One of the most popular means for removal of organic water pollutants found in small concentrations is by adsorption. An important step in adsorption processes is the regeneration of the adsorbent as it does not only affect the adsorption-desorption cycle but also the expenses of the following process steps. State of the art regeneration of adsorbent resins is done by chemical methods. These require the use of organic solvents or inorganic chemicals and involve a difficult secondary separation step. Therefore, industry seeks for alternative methods to regenerate exhausted adsorbents. One of the discussed regeneration methods is desorption by ultrasound. Ultrasound does not only promote desorption but also enhances the mass transfer of sorption processes. We discuss the arising problems and basic effects when applying ultrasound during sorption processes in order to show the potentials of this desorption process. The focus is laid in particular on the influence of ultrasound frequency and intensity.     

Ultrasound-assisted regeneration of zeolite/water adsorption pair

The use of ultrasound to enhance the regeneration of zeolite 13X for efficient utilization of thermal energy was investigated as a substitute to conventional heating methods. The effects of ultrasonic power and frequency on the desorption of water from zeolite 13X were analyzed to optimize the desorption efficiency. To determine and justify the effectiveness of incorporating ultrasound from an energy-savings point of view, an approach of constant overall input power of 20 or 25 W was adopted. To measure the extent of the effectiveness of using ultrasound, the ultrasonic-power-to-total power ratios of 0.2, 0.25, 0.4 and 0.5 were investigated and the results compared with those of no-ultrasound (heat only) at the same total power. To analyze the effect of ultrasonic frequency, identical experiments were performed at three nominal ultrasonic frequencies of ~28, 40 and 80 kHz. The experimental results showed that using ultrasound enhances the regeneration of zeolite 13X at all the aforementioned power ratios and frequencies without increasing the total input power. With regard to energy consumption, the highest energy-savings power ratio (0.25) resulted in a 24% reduction in required input energy and with an increase in ultrasonic power, i.e. an increase in acoustic-to-total power ratio, the effectiveness of applying ultrasound decreased drastically. At a power ratio of 0.2, the time required for regeneration was reduced by 23.8% compared to the heat-only process under the same experimental conditions. In terms of ultrasonic frequency, lower frequencies resulted in higher efficiency and energy savings, and it was concluded that the effect of ultrasonic radiation becomes more significant at lower ultrasonic frequencies. The observed inverse proportionality between the frequency and ultrasound-assisted desorption enhancement suggests that acoustic dissipation is not a significant mechanism to enhance mass transfer, but rather other mechanisms must be considered.     

Fabrication of Anodic Aluminum Oxide Templates with Small Interpore Distances

The influence of the electropolishing and anodization voltage on surface morphology has been carefully studied for fabrication of ordered anodic aluminum oxide （AAO） templates. In accordance with that in the anodization experiment, the size of small patterns on the foil surface formed from the electropolishing treatment increases with voltage. Using a combined method of small-voltage eleetropolishing and anodization, we have fabricated well ordered templates with much smaller interpore distances compared with that under normal-voltage fabrication conditions. The Ni nanowire arrays with two small diameters are eleetrodeposited through the above templates, exhibiting different magnetic properties. This also helps us to clarify the inner structure of this kind of templates.     

Theoretical prediction of the scattering of spherical bubble clusters under ultrasonic excitation

Due to the nonlinear vibration of ultrasound contrast agent bubbles, a nonlinear scattered sound field will be generated when bubbles are driven by ultrasound. A bubble cluster consists of numerous bubbles gathering in a spherical space. It has been noted that the forward scattering of a bubble cluster is larger than its backscattering, and some studies have experimentally found the angular dependence of a bubble cluster’s scattering signal. In this paper, a theory is proposed to explain the difference of acoustic scattering at different directions of a bubble cluster when it is driven by ultrasound, and predicts the angular distribution of scattered acoustic pressure under different parameters. The theory is proved to be correct under circumstances of small clusters and weak interactions by comparing theoretical results with numerical simulations. This theory not only sheds light on the physics of bubble cluster scattering, but also may contribute to the improvement of ultrasound imaging technology, including ultrasonic harmonic imaging and contrast-enhanced ultrasonography.     

Optical and acoustic monitoring of bubble cloud dynamics at a tissue-fluid interface in ultrasound tissue erosion

Short, high-intensity ultrasound pulses have the ability to achieve localized, clearly demarcated erosion in soft tissue at a tissue-fluid interface. The primary mechanism for ultrasound tissue erosion is believed to be acoustic cavitation. To monitor the cavitating bubble cloud generated at a tissue-fluid interface, an optical attenuation method was used to record the intensity loss of transmitted light through bubbles. Optical attenuation was only detected when a bubble cloud was seen using high speed imaging. The light attenuation signals correlated well with a temporally changing acoustic backscatter which is an excellent indicator for tissue erosion. This correlation provides additional evidence that the cavitating bubble cloud is essential for ultrasound tissue erosion. The bubble cloud collapse cycle and bubble dissolution time were studied using the optical attenuation signals. The collapse cycle of the bubble cloud generated by a high intensity ultrasound pulse of 4-14 micros was approximately 40-300 micros depending on the acoustic parameters. The dissolution time of the residual bubbles was tens of ms long. This study of bubble dynamics may provide further insight into previous ultrasound tissue erosion results.     

Ultrasonic cavitation: An effective cleaner and greener intensification technology in the extraction and surface modification of nanocellulose

With rising consumer demand for natural products, a greener and cleaner technology, i.e., ultrasound-assisted extraction, has received immense attention given its effective and rapid isolation for nanocellulose compared to conventional methods. Nevertheless, the application of ultrasound on a commercial scale is limited due to the challenges associated with process optimization, high energy requirement, difficulty in equipment design and process scale-up, safety and regulatory issues. This review aims to narrow the research gap by placing the current research activities into perspectives and highlighting the diversified applications, significant roles, and potentials of ultrasound to ease future developments. In recent years, enhancements have been reported with ultrasound assistance, including a reduction in extraction duration, minimization of the reliance on harmful chemicals, and, most importantly, improved yield and properties of nanocellulose. An extensive review of the strengths and weaknesses of ultrasound-assisted treatments has also been considered. Essentially, the cavitation phenomena enhance the extraction efficiency through an increased mass transfer rate between the substrate and solvent due to the implosion of microbubbles. Optimization of process parameters such as ultrasonic intensity, duration, and frequency have indicated their significance for improved efficiency.     

Studies on some solar collector/regenerator systems for open cycle absorption air conditioning/liquid desiccant cooling systems

This communication presents theoretical heat and mass transfer studies on solar collector/regenerator systems which determine the performance of open cycle absorption air conditioning system. Possible configurations viz. open inclined surface, forced flow and brine-still solar regenerators have been analytically modelled and a comparative assessment using a numerical model has been presented. The numerical model takes into account the flow length dependence of the solution temperature/concentration and the rate of water mass desorption in the regenerator. The effects of various operating and climatic parameters on the water mass desorption rate for the given working fluid have been studied.     

Laser-enhanced thermal effects during focused ultrasound radiation on biological tissues

The thermal effects induced by a moderate intensity focused ultrasound and enhanced by combined laser pulses for bio-tissues and tissue-phantom are studied experimentally and theoretically. At first, the heating effects of bio-tissues and tissue-phantom induced by ultrasound and enhanced by laser are measured experimentally. The heating processes induced by attenuations of focused ultrasonic waves and cavitation effects of the focused ultrasound and combined laser are analyzed theoretically. By analyzing the mechanisms of these effects, it is found that the laser nucleation makes the cavitation bubble generation more easily, which can effectively enhance the ultrasonic cavitation effects, and then enhance the thermal effects of the samples. On the other hand, to evaluate quantitatively the heating processes induced by the focused ultrasound and enhanced by the pulsed laser, by fitting the theoretical calculations to the experimental results, the corresponding cavitation bubbles and rising temperatures induced by the focused ultrasound with and without laser can be estimated approximately.     

Magnetic nanowires fabricated by anodic aluminum oxide template—a brief review

Anodic aluminum oxide(AAO) with highly ordered nanoscale pores which are monodisperse and mutually parallel can be produced through a self-organized electrochemical process.Subsequent deposition of materials into the nanopores produces AAO embedded nanowire arrays.Whilst the templates can be further removed to obtain free individual nanowires,the embedded nanowires form an interesting nanocomposite structure.Recent research activities on the fabrication and characteriza-tion of AAO template based magnetic n...     

Energy budget of cosmological first-order phase transition in FLRWbackground

We study the hydrodynamics of bubble expansion in cosmological first-order phase transition in the Friedmann-Lema??treRobertson-Walker(FLRW) background with probe limit. Different from previous studies for fast first-order phase transition in flat background, we find that, for slow first-order phase transition in FLRW background with a given peculiar velocity of the bubble wall, the efficiency factor of energy transfer into bulk motion of thermal fluid is significantly reduced, thus decreasing the previously-thought dominated contribution from sound wave to the stochastic gravitational-wave background.