Sonochemical synthesis and fabrication of perovskite type calcium titanate interfacial nanostructure supported on graphene oxide sheets as a highly efficient electrocatalyst for electrochemical detection of chemotherapeutic drug

In green approaches for electrocatalyst synthesis, sonochemical methods play a powerful role in delivering the abundant surface areas and nano-crystalline properties that are advantageous to electrocatalytic detection. In this article, we proposed the sphere-like and perovskite type of bimetal oxides which are synthesized through an uncomplicated sonochemical procedure. As a yield, the novel calcium titanate (orthorhombic nature) nanoparticles (CaTiO₃ NPs) decorated graphene oxide sheets (GOS) were obtained through simple ultrasonic irradiation by a high-intensity ultrasonic probe (Titanium horn; 50 kHz and 60 W). The GOS/CaTiO₃ NC were characterized morphologically and chemically through the analytical methods (SEM, XRD, and EDS). Besides, as-prepared nanocomposites were modified on a GCE (glassy carbon electrode) and applied towards electrocatalytic and electrochemical sensing of chemotherapeutic drug flutamide (FD). Notably, FD is a crucial anticancer drug and also a non-steroidal anti-androgen chemical. Mainly, the designed and modified sensor has shown a wide linear range (0.015–1184 µM). A limit of detection was calculated as nanomolar level (5.7 nM) and sensitivity of the electrode is 1.073 μA μM⁻¹ cm⁻². The GOS/CaTiO₃ modified electrodes have been tested in human blood and urine samples towards anticancer drug detection.     

A feasible sonochemical approach to synthesize CuO@CeO2 nanomaterial and their enhanced non-enzymatic sensor performance towards neurotransmitter

A nanostructured and high conductive cupric oxide (CuO NPs) with hierarchical CeO₂ sheets-like structure was synthesized by a facile sonochemical approach. Furthermore, CuO/CeO₂ nanostructure is synthesized by high-intensity ultrasonic probe (Ti-horn, 50 kHz and 100 W) at ambient air. Moreover, the synthesized CuO/CeO₂ material was characterized by various analytical techniques including FESEM, EDX, XRD and electrochemical methods. Then, the synthesized CuO/CeO₂ composite was applied for the electrocatalytic detection of dopamine using CV and DPV techniques. In addition, the CuO/CeO₂ modified electrode has good electrocatalytic performance with high linear range from 0.025 to 98.5 µM towards the determination of dopamine drug and high sensitivity of the CuO/CeO₂ modified drug sensor was calculated as 16.34 nM and 4.823 μA·µM⁻¹·cm⁻², respectively. Moreover, a repeatability, reproducibility and stability of the CuO@CeO₂ mixture modified electrode were analyzed towards the determination of dopamine biomolecule. Interestingly, the real time application of CuO@CeO₂ modified electrode was established in different serum and drug samples.     

Facile sonochemical synthesis of rutile-type titanium dioxide microspheres decorated graphene oxide composite for efficient electrochemical sensor

In this reports the facile and green synthesis of rutile-type titanium dioxide nanoparticles decorated graphene oxide nanocomposite via the ultrasonication process (frequency: 50 kHz, Power: 100 W/cm² and Ultrasonic type: Ti-horn). Because, the sonochemical synthesis method is simple, non-explosive and harmless method than other conventional technique. Furthermore, the synthesized material was characterized by various analytical techniques including FESEM, EDX, XRD, EIS and electrochemical methods. Then, the synthesized TiO₂ MPs@GOS composite was applied for the electrocatalytic detection of theophylline (TPL) using CV and amperometric (current-time) techniques. Captivatingly, the modified sensor has excellent electrocatalytic performance with the wider linear range from 0.02 to 209.6 µM towards the determination of theophylline and the LOD and sensitivity of the modified sensor was calculated as 13.26 nM and 1.183 μA·µM⁻¹·cm⁻², respectively. In addition, a selectivity, reproducibility and stability of the TiO₂ MPs@GOS modified GCE were analyzed towards the determination of theophylline molecule. Finally, the real time application of TiO₂ MPs@GOS modified theophylline sensor was established in serum and drug samples.     

Ultrasonication-aided synthesis of nanoplates-like iron molybdate: Fabricated over glassy carbon electrode as an modified electrode for the selective determination of first generation antihistamine drug promethazine hydrochloride

The innovation of novel and proficient nanostructured materials for the precise level determination of pharmaceuticals in biological fluids is quite crucial to the researchers. With this in mind, we synthesized iron molybdate nanoplates (Fe₂(MoO₄)₃; FeMo NPs) via simple ultrasonic-assisted technique (70 kHz with a power of 100 W). The FeMo NPs were used as the efficient electrocatalyst for electrochemical oxidation of first-generation antihistamine drug- Promethazine hydrochloride (PMH). The as-synthesized FeMo NPs were characterized and confirmed by various characterization techniques such as XRD, Raman, FT-IR, FE-SEM, EDX and Elemental mapping analysis and electron impedance spectroscopy (EIS). In addition, the electrochemical characteristic features of FeMo NPs were scrutinized by electrochemical techniques like cyclic voltammetry (CV) and differential pulse voltammetry technique (DPV). Interestingly, the developed FeMo NPs modified glassy carbon electrode (FeMo NPs/GCE) discloses higher peak current with lesser anodic potential on comparing to bare GCE including wider linear range (0.01–68.65 µM), lower detection limit (0.01 µM) and greater sensitivity (0.97 µAµM^-1cm⁻²). Moreover, the as-synthesized FeMo NPs applied for selectivity, reproducibility, repeatability and storage ability to investigate the practical viability. In the presence of interfering species like cationic, anionic and biological samples, the oxidation peak current response doesn’t cause any variation results disclose good selectivity towards the detection of PMH. Additionally, the practical feasibility of the FeMo NPs/GCE was tested by real samples like, commercial tablet (Phenergan 25 mg Tablets) and lake water samples which give satisfactory recovery results. All the above consequences made clear that the proposed sensor FeMo NPs/GCE exhibits excellent electrochemical behavior for electrochemical determination towards oxidation of antihistamine drug PMH.     

A new analytical device incorporating a nitrogen doped lanthanum metal oxide with reduced graphene oxide sheets for paracetamol sensing

The novel N-CeO₂ nanoparticles decorated on reduced graphene oxide (N-CeO₂@rGO) composite has been synthesized by sonochemical method. The characterization of as prepared nanocomposite was intensely performed by UV–Vis, FT-IR, EDX, FE-SEM, HR-TEM, XRD, and TGA analysis. The synthesized nanomaterial was further investigated for its selective and sensitive sensing of paracetamol (PM) based on a N-CeO₂@rGO modified glassy carbon electrode. A distinct and improved reversible redox peak of PM is obtained at N-CeO₂@rGO nanocomposite compared to the electrodes modified with N-CeO₂ and rGO. It displays a very good performance with a wide linear range of 0.05–0.600 μM, a very low detection limit of 0.0098 μM (S/N = 3), a high sensitivity of 268 μA µM⁻¹ cm⁻² and short response time (<3 s). Also, the fabricated sensor shows a good sensibleness for the detection of PM in various tablet samples.     

Sonochemical preparation of bismuth oxide nanotiles decorated exfoliated graphite for the electrochemical detection of imipramine

This work described the sonohydrolysis of Bi(NO₃)₃ into Bi₂O₃ and simultaneous sonochemical exfoliation of graphite into graphene sheets in the alkaline environment and its electocatalytic performance towards the detection of anti-depression drug imipramine (IMPR). The ultrasound (37/80 kHz; 60 W) effectively hydrolyzed the Bi(NO₃)₃ into a single crystalline monoclinic phase of Bi₂O₃ nanotiles in the alkaline condition. And also, the sonochemical reaction condition can trigger the lamellar particles on the graphite bulk surface and allowed to exfoliated the graphite (EG) into graphene nanosheets as well. The material characterizations are done by XRD, Raman, FESEM, and HRTEM. It shows the α-Bi₂O₃ nanotiles along with EG nanosheets with high crystallinity and low defects. The (0 0 2) plane in XRD confirms the high crystalline nature of EG. The monoclinic stretching vibrations (90–600 cm⁻¹) confirms the Raman modes of Bi₂O₃. The prepared Bi₂O₃-EG composites are subjected to the electrochemical determination of IMPR which revealed appreciable analytical performances. The results showed that the Bi₂O₃-EG exhibits better results in the 3 h sonication process. Bi₂O₃-EG-3 exhibited a good linear range (0.02–82.3 µM) and an acceptable limit of detection (6 nM). And also Bi₂O₃-EG-3 exhibits the significant tolerance limit when compared to other potential interfering compounds.     

Ultrasound-assisted synthesis of graphene@MXene hybrid: A novel and promising material for electrochemical sensing

To date, multiple graphene@MXene hybrids have been reported via various synthesis approaches, but almost all the graphene@MXene hybrids inevitably used the reduced graphene oxide that prepared by chemical oxidation/reduction method, which generally involved the complex and dangerous operation procedure, and the highly toxic chemical reagent. How to prepare graphene@MXene hybrid through a simple, safe and eco-friendly synthetic route is highly desired. Compared with traditional synthesis technology, ultrasound synthesis strategy displays the merits of simplicity, low cost and environment protection. Herein, MXene (Ti₃C₂T_x) nanoflakes coupled with graphene nanosheets (graphene@MXene) were prepared in N-methylpyrrolidone (NMP) by simple ultrasound-assisted liquid-phase exfoliation method for the first time. Besides, the effect of types of solvent with different viscocity, sonication temperature and sonication duration time on the property of graphene@MXene hybrids were systematacially investigated. It is found the liquid-phase exfoliated graphene owned excellent electron transfer ability and the MXene (Ti₃C₂T_x) nanoflakes possessed outstanding adsorption property, the as-synthesized graphene@MXene hybrid exhibited significant signal synergistic enhancement effect toward the oxidation of hazardous veterinary drug residue compound (chlorpromazine) and food additives (rhodamine B). Based on this, a novel and sensitive electrochemical sensor was fabricated, the linear detection ranges were 5 nM to 0.5 μM for chlorpromazine with sensitivity of 1090 µA μM⁻¹ cm⁻², and 10 nM to 2.5 μM for rhodamine B with sensitivity of 440 and 102.14 µA μM⁻¹ cm⁻². Besides, the detection limits were evaluated to be as low as 1.25 nM and 2.45 nM for chlorpromazine and rhodamine B, respectively.     

Sonochemical synthesis of samarium tungstate nanoparticles for the electrochemical detection of nilutamide

This study reports the sonochemical synthesis of samarium tungstate nanoparticles (SWNPs) for applications in electrochemical sensors. The synthesis process is based on a precipitation reaction, which was investigated by ultrasound and compared with the effect of stirring. A bath sonicator operated at a frequency and power of 37/100 kHz and ~60 W, respectively, was employed to prepare the material. The shock waves efficiently irradiated the reaction conditions as much as possible, resulting in the good crystallinity of the monoclinic phase of the SWNPs, which was confirmed by XRD analysis. The surface morphology and structural composition was further evaluated by HRTEM, EDS and XPS. The good crystallinity and uniform distribution of elements in the nanoparticles were confirmed. The performance of the SWNPs to electrochemically sense nilutamide (NLT) was studied, which revealed a good electrochemical signal. As a result, the SWNPs were applied to an electrode material for the detection of NLT. This study revealed the excellent activity of the SWNPs for NLT detection, resulting in a low detection limit (0.0026 µM) and good linear range (0.05–318 µM). Furthermore, the results show appreciable analytical performances, which could be applied to electrochemical anti-androgen drug nilutamide sensors.     

Sonochemical synthesis of nickel-manganous oxide nanocrumbs decorated partially reduced graphene oxide for efficient electrochemical reduction of metronidazole

In the present work, we report on the synthesis of crump-like nickel manganous oxide nanoparticles decorated partially reduced graphene oxide (NiMnO@pr-GO) nanocomposite through high-intensity ultrasonic bath sonication (ultrasonic frequency = 37 kHz and power = 150 W). The NiMnO@pr-GO nanocomposite modified glassy carbon electrode (GCE) was then employed for the electrochemical reduction of detrimental metronidazole (MNZ). The crystalline phase and formation of the NiMnO@pr-GO nanocomposites were confirmed by X-ray diffraction and other spectroscopic techniques. The cyclic voltammetry results demonstrate that this NiMnO@pr-GO nanocomposite modified GCE has a lower reduction potential and higher catalytic activity towards MNZ than do NiMnO and GO modified GCEs. Under optimized conditions, the fabricated NiMnO@pr-GO electrode can detect metronidazole over a wide linear range with a lower limit of detection of 90 nM. The sensitivity of the sensor was 1.22 µA µM^-1cm⁻² and was found to have excellent selectivity and durability for the detection of MNZ.     

Ultrasonic preparation and nanosheets supported binary metal oxide nanocomposite for the effective application towards the electrochemical sensor

Binary metal oxides (La₂O₃@SnO₂) decorated reduced graphene oxide nanocomposite was synthesized by ultrasound process in an environmentally benign solvent with a working frequency of 25 and 40 kHz (6.5 l200 H, Dakshin, India and maximum input power 210 W). Further, to enhance the electrocatalytic activity, the reduced graphene oxide (rGO) was prepared from graphene oxide by ultrasonication method. As prepared La₂O₃@SnO₂/rGO was scrutinized using XRD, TEM, EDX and quantitative test for the structural and morphology properties. As modified La₂O₃@SnO₂/rGO nanocomposite exhibits better electrochemical activity towards the oxidation of methyl nicotinate with higher anodic current compared to other modified and unmodified electrode for the detection of methyl nicotinate with larger linear range (0.035–522.9 µM) and lower limit of detection (0.0197 µM). In addition, the practical feasibility of the sensor was inspected with biological samples, reveals the acceptable recovery of the sensor in real samples.     

Converting of the 2D graphene to its 3D by chicken red blood cells as sheets separator for construction supercapacitor electrode

Here, we report on a facile green and scalable method for the fabrication of porous 3D graphene as a well-known carbon-based material used in many energy storage devices. Chicken red blood cells were used as sheets spacer and heteroatom sources in the construction of 3D graphene. First, the red blood cells were separated from the blood and mixed with graphene oxide. Then, the mixture was freeze-dried and carbonized at 700 °C. The resulted 3D graphene containing heteroatoms was used as a supercapacitor electrode modifier on a glassy carbon electrode and tested with various electrochemical techniques. The supercapacitor electrode showed a specific capacitance of 330 F g⁻¹ at a current density of 1 A g⁻¹, maximum power density of 1958 W kg⁻¹, and maximum energy density of 85 Wh kg⁻¹. Furthermore, the supercapacitive performances were tested in a two-electrode symmetrical system which exhibited a specific capacitance of 238 F g⁻¹ for 1 A g⁻¹. It also showed a power density of 2200 W kg⁻¹ and an appreciable energy density of 160 Wh kg⁻¹. The excellent electrochemical behavior of 3D graphene indicates the promising abilities of the composite for other applications such as biosensors, batteries, electrocatalysts, etc.     

One-pot sonochemical synthesis of CuS nanoplates decorated partially reduced graphene oxide for biosensing of dopamine neurotransmitter

The sonochemical methods have been used as a straight forward method for the synthesis of various composite materials, including the transition metal dichalcogenide composites. In the present work, we report a simple sonochemical synthesis of CuS nanoplates decorated partially reduced graphene oxide (PrGO) nanocomposite for the first time. The PrGO-CuS nanocomposite was synthesized using bath-sonication (frequency: 37 kHz; power: 150 W) of graphene oxide (GO), and CuS precursors at 80 °C for 60 min. The physicochemical characterization (FESEM, XRD, FTIR, and Raman spectroscopy) results confirmed the successful formation of CuS nanoplates on PrGO nanosheets. The as-synthesized PrGO-CuS nanocomposite was further utilized for electroanalysis of dopamine neurotransmitter. The obtained electroanalytical results revealed that PrGO-CuS nanocomposite has superior electrochemical activity towards dopamine than those obtained for GO, CuS, and GO-CuS composite. The fabricated biosensor shows a lower limit of detection (0.022 µM) with a more comprehensive linear response range (0.1–155.1 µM) for the detection of dopamine. Moreover, the PrGO-CuS nanocomposite electrode was successfully used for the detection of dopamine in bovine serum albumin.     

Highly sensitive and selective detection of glutathione using ultrasonic aided synthesis of graphene quantum dots embedded over amine-functionalized silica nanoparticles

Glutathione (GSH) is the most abundant antioxidant in the majority of cells and tissues; and its use as a biomarker has been known for decades. In this study, a facile electrochemical method was developed for glutathione sensing using voltammetry and amperometry analyses. In this study, a novel glassy carbon electrode composed of graphene quantum dots (GQDs) embedded on amine-functionalized silica nanoparticles (SiNPs) was synthesized. GQDs embedded on amine-functionalized SiNPs were physical-chemically characterized by different techniques that included high resolution-transmission electron microscopy (HR-TEM), X-ray diffraction spectroscopy (XRD), UV–visible spectroscopy, Fourier-transform infrared spectroscopy (FTIR), and Raman spectroscopy. The newly developed electrode exhibits a good response to glutathione with a wide linear range (0.5–7 µM) and a low detection limit (0.5 µM) with high sensitivity(2.64 µA µM⁻¹). The fabricated GQDs-SiNPs/GC electrode shows highly attractive electrocatalytic activity towards glutathione detection in the neutral media at low potential due to a synergistic surface effect caused by the incorporation of GQDs over SiNPs. It leads to higher surface area and conductivity, improving electron transfer and promoting redox reactions. Besides, it provides outstanding selectivity, reproducibility, long-term stability, and can be used in the presence of interferences typically found in real sample analysis.     

Ultrasonic assisted fabrication of silver tungstate encrusted polypyrrole nanocomposite for effective photocatalytic and electrocatalytic applications

Ultrasonication is an emerging and evergreen technique for the efficient synthesis of the catalytically active heterostructured materials. In-situ one-pot ultrasonic-assisted synthesis method was demonstrated in this work for the fabrication of silver tungstate encrusted polypyrrole nanocomposite using semi-automatic ultrasonic probe maintained at 34°C/50 kHz ultrasonic frequency and at 150 W ultrasonic power. This material retains enhanced optical, electrical, morphological properties, photocatalytic behavior in photodegradation of congo red dye, tetracycline drug and its electrochemical sensing potential for the effective determination of a broad spectrum of antibacterial drug, nitrofurazone. Optical properties were investigated using UltraViolet–Visible diffuse reflectance spectral (UV–VIS DRS) data along with Tauc’s bandgap energy calculations. The morphological properties were examined using FESEM and TEM micrographs. All the PXRD and XPS details prove the effective distribution of PPy on the surface of Ag₂WO₄ rods with the help of powerful ultrasonic assistance. PPy acted as a support for nucleation and growth of Ag₂WO₄ and an inhibitor of phase transformations. Ag₂WO₄/PPy exhibits great photocatalytic behavior while comparing with pure PPy and Ag₂WO₄ in the degradation of carcinogenic dye congo red and antibiotic drug tetracycline. In addition to that, Ag₂WO₄/PPy modified GCE exposed a widespread linear range from 0.1 to 107 µM along with a very low detection limit of 12 nM and huge sensitivity of 1.74 µA µM⁻¹cm⁻² in the electrochemical determination of nitrofurazone.     

Adsorption of Metformin on Graphene Nanoribbons and Application in Treatment of Oral Cancer Using Photothermal Energy

Graphene nanoribbons are thin sheets of graphene showing exclusive characteristics such as better drug-loading capacity, adsorption on mammalian cells, greater surface area, and light-absorbing ability. The current research work is to develop metformin-adsorbed carboxyl-functionalized oxidized graphene nanoribbons and utilize drug repurposing for the treatment of oral cancer by activating photo-thermal radiation therapy. The nanoribbons are formulated by Hummer's method and evaluated for several characterization parameters like ATR- Fourier Transform Infrared (FTIR), Differential scanning calorimetry (DSC), topology, in vitro efficacy, ex vivo and in vitro cell line studies. The ATR-FTIR spectrum of formulated nanoribbons shows distinctive peak at 3370 cm⁻¹ ( N H group) of metformin. The DSC specifies the incidence of steep endothermic crests at 235 °C ( C NH₃). The in vitro and ex vivo drug release studies show enhanced drug release in acidic pH (6.4) than physiological pH (7.4) with photothermal radiation. The in vitro cell line studies are processed via two-way ANOVA that exhibits 67.74 ± 0.03% of % inhibition in presence of photothermal radiation. The study demonstrates higher inhibition of cancerous cells at lower concentration of drug and photothermal therapy in comparison to plain drug. The characteristic feature of graphene is used to develop targeted drug delivery system against the oral cancerous cells.     

In Situ Synthesis and Characterization of Polypyrrole/Graphene Conductive Nanocomposites via Electrochemical Polymerization and Chemical Reduction

Polypyrrole/graphene sheets (PPy/GNs) nanocomposite electrodes were in- situ synthesized via electrochemical polymerization and chemical reduction from pyrrole (Py) and graphene oxide (GO). The surface morphologies of the nanocomposites were observed by scanning electron microscopy (SEM). The SEM results showed graphene sheets (GNs) scattered on the surface of the polypyrrole (PPy), and the morphologies of PPy/GNs nanocomposites manufactured by pulse current (PC-PPy/GNs) or direct current (DC-PPy/GNs) were smoother than that of PC-PPy. The electrochemical capacitance properties of the nanocomposite films were measured by cyclic voltammetry (CV), galvanostatic charge and discharge (GC), and electrochemical impedance spectroscopy (EIS) techniques in 3 mol·L^?1 KCl aqueous solutions. The results indicated that the specific capacitance of the DC-PPy/GNs nanocomposite was 13.5% higher than that of a PC-PPy electrode. Comparison of the electrochemical performance of the nanocomposites indicated that the PC-PPy/GNs nanocomposite had higher specific capacitance and better charging/discharging capability than that of the DC-PPy/GNs nanocomposite. The specific capacitance of the PC-PPy/GNs nanocomposite could reach to 280 F·g^?1 at a scanning rate of 100 mV·s^?1.     

Ultrasound-aided synthesis of gold-loaded boron-doped graphene quantum dots interface towards simultaneous electrochemical determination of guanine and adenine biomolecules

To acquire substantial electrochemical signals of guanine-GUA and adenine-ADE present in deoxyribonucleic acid-DNA, it is critical to investigate innovative electrode materials and their interfaces. In this study, gold-loaded boron-doped graphene quantum dots (Au@B-GQDs) interface was prepared via ultrasound-aided reduction method for monitoring GUA and ADE electrochemically. Transmission electron microscopy-TEM, Ultraviolet–Visible spectroscopy-UV–Vis, Raman spectroscopy, X-ray photoelectron spectroscopy-XPS, cyclic voltammetry-CV, and differential pulse voltammetry-DPV were used to examine the microstructure of the fabricated interface and demonstrate its electrochemical characteristics. The sensor was constructed by depositing the as-prepared Au@B-GQDs as a thin layer on a glassy carbon-GC electrode by the drop-casting method and carried out the electrochemical studies. The resulting sensor exhibited a good response with a wide linear range (GUA = 0.5–20 μM, ADE = 0.1–20 μM), a low detection limit-LOD (GUA = 1.71 μM, ADE = 1.84 μM), excellent sensitivity (GUA = 0.0820 µAµM⁻¹, ADE = 0.1561 µAµM⁻¹) and selectivity with common interferents results from biological matrixes. Furthermore, it seems to have prominent selectivity, reproducibility, repeatability, and long-lasting stability. The results demonstrate that the fabricated Au@B-GQDs/GC electrode is a simple and effective sensing platform for detecting GUA and ADE in neutral media at low potential as it exhibited prominent synergistic impact and outstanding electrocatalytic activity corresponding to individual AuNPs and B-GQDs modified electrodes.     

SnO2-decorated multiwalled carbon nanotubes and Vulcan carbon through a sonochemical approach for supercapacitor applications

Multiwalled carbon nanotubes (MWCNTs) and Vulcan carbon (VC) decorated with SnO₂ nanoparticles were synthesized using a facile and versatile sonochemical procedure. The as-prepared nanocomposites were characterized by means of transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and Fourier transform infra red spectroscopy. It was evidenced that SnO₂ nanoparticles were uniformly distributed on both carbon surfaces, tightly decorating the MWCNTs and VC. The electrochemical performance of the nanocomposites was evaluated by cyclic voltammetry and galvanostatic charge/discharge cycling. The as-synthesized SnO₂/MWCNTs nanocomposites show a higher capacity than the SnO₂/VC nanocomposites. Concretely, the SnO₂/MWCNTs electrodes exhibit a specific capacitance of 133.33 F g⁻¹, whereas SnO₂/VC electrodes exhibit a specific capacitance of 112.14 F g⁻¹ measured at 0.5 mA cm⁻² in 1 M Na₂SO₄.     

Highly sensitive electrochemical detection of adenine on a graphene-modified carbon ionic liquid electrode

A new electrochemical method for the sensitive detection of adenine was established on a chitosan (CTS)- and graphene (GR)-modified carbon ionic liquid electrode (CILE). CILE was prepared by mixing 1-butylpyridinium hexafluorophosphate (BPPF₆) and paraffin with graphite powder. Due to the synergistic effects of GR, CILE, and the interaction of GR with IL on the electrode surface, the electrochemical performance of CTS/GR/CILE were greatly enhanced. Electrochemical behaviors of adenine on the modified electrode was investigated with a single well-defined oxidation peak appeared. The electrochemical reaction of adenine was an adsorption-controlled irreversible process, and the electrochemical parameters were further calculated. Under the optimal conditions, the oxidation peak current was proportional to adenine concentration in the range from 1.0 nmol L^?1 to 70.0 μmol L^?1 with a detection limit of 0.286 nmol L^?1 (3σ) by differential pulse voltammetry. The established method showed the advantages such as good selectivity, stability, and repeatability.     

Sonochemical synthesis of LiNi0.5Mn1.5O4 and its electrochemical performance as a cathode material for 5 V Li-ion batteries

LiNi_0.5Mn_1.5O₄ was synthesized as a cathode material for Li-ion batteries by a sonochemical reaction followed by annealing, and was characterized by XRD, SEM, HRTEM and Raman spectroscopy in conjunction with electrochemical measurements. Two samples were prepared by a sonochemical process, one without using glucose (sample-S1) and another with glucose (sample-S2). An initial discharge specific capacity of 130 mA h g⁻¹ is obtained for LiNi_0.5Mn_1.5O₄ at a relatively slow rate of C/10 in galvanostatic charge–discharge cycling. The capacity retention upon 50 cycles at this rate was around 95.4% and 98.9% for sample-S1 and sample-S2, respectively, at 30 °C.