Branched and dendritic metallo-carbosiloxanes with OCH2PPh2MLn end-grafted units

A straightforward method for the preparation of metallo carbosiloxanes of type Si(OCH₂CH₂CH₂SiMe₂[OCH₂PPh₂M(CO)_n])₄ (n = 3, M = Ni, 7a; n = 4, M = Fe, 7b; n = 5: M = Mo, 7c; M = W, 7d), Si(OCH₂CH₂CH₂SiMe[OCH₂PPh₂Ni(CO)₃]₂)₄ (8) and Me₂Si(OCH₂CH₂CH₂SiMe[OCH₂PPh₂Ni(CO)₃]₂)₂ (11) is described. The reaction of Si(OCH₂CH₂CH₂SiMeXCl)₄ (1: X = Me, 2: X = Cl) or Me₂Si(OCH₂CH₂CH₂SiMeCl₂)₂ (9) with HOCH₂PPh₂ (3) produces Si(OCH₂CH₂CH₂SiMe₂(OCH₂PPh₂))₄ (4), Si(OCH₂CH₂CH₂SiMe(OCH₂PPh₂)₂)₄ (5) or Me₂Si(OCH₂CH₂CH₂SiMe(OCH₂PPh₂)₂)₂ (10) in presence of DABCO. Treatment of the latter molecules with Ni(CO)₄ (6a), Fe₂(CO)₉ (6b), M(CO)₅(Thf) (6c: M = Mo; 6d: M = W), respectively, gives the title compounds 7a-7d, 8 and 11 in which the PPh₂ groups are datively bound to a 16-valence-electron metal carbonyl fragment.The formation of analytical pure and uniform branched and dendritic metallo carbosiloxanes is based on elemental analysis, and IR, ¹H, ¹³C{¹H}, ²⁹Si{¹H} and ³¹P{¹H} NMR spectroscopic studies. In addition, ESI-TOF mass spectrometric studies were carried out.     

Reactions of bis(alkynyl)silanes with HB(C6F5)2: Formation of boryl-substituted silacyclobutene derivatives

Treatment of R₂Si(CC-SiMe₃)₂ [1a (Me), 1b (Ph)] with HB(C₆F₅)₂ at low temperature (253 K (a), 273 K (b)) gives the -B(C₆F₅)₂ substituted silacyclobutene products (4a,b) under kinetic control. Upon warming to room temperature they disappear to form the thermodynamically favoured isomeric silole derivatives (2a,b). Similar treatment of Me₂Si(CC-R¹)₂ [5a (R¹ = Ph), 5b (R¹ = tert-butyl) with HB(C₆F₅)₂ at room temperature gave the stable -B(C₆F₅)₂ substituted silacyclobutene derivatives 6 and 7, respectively. Subsequent photolysis resulted in a Z- to E-isomerization of the substituted exocyclic CC double bonds in these products. The silacyclobutene derivative E-6 was characterized by an X-ray crystal structure analysis.     

Convenient syntheses of fluorous phenols of the formula HOC6H5−n((CH2)3(CF2)7CF3)n (n=1, 2) and the corresponding triarylphosphites

The aldehydic benzyl ethers PhCH₂OC₆H₄CHO (2; a/b = para/meta series) are readily available from the corresponding phenols and react with Wittig reagents derived from [Ph₃PCH₂CH₂R_f8]⁺I⁻ (R_f8=(CF₂)₇CF₃) to give PhCH₂OC₆H₄CHCHCH₂R_f8 (86-93%, Z major). Reactions with H₂ over Pd/C give the fluorous phenols HOC₆H₄(CH₂)₃R_f8(4a,b; 87-91%). Condensations with PCl₃ and NEt₃ (3.0:1.0:3.3 mol ratio) give the fluorous phosphites P[OC₆H₄(CH₂)₃R_f8]₃(5a,b; 92-94%), but traces of 4a,b are difficult to remove. The phthalate-based benzyl ethers PhCH₂OC₆H₃(COOR)₂ (7; ,5/3,4 OC₆H₃-3,n-(R)₂ series) are easily accessed and reduced with LiAlH₄ to the diols PhCH₂OC₆H₃(CH₂OH)₂(8c,d; 89-90%). Diol 8c and the Dess-Martin periodinane react to give the dialdehyde PhCH₂OC₆H₃(CHO)₂ (9c; 95%). This is elaborated by a sequence analogous to 2→4→5 to the fluorous phenol HOC₆H₃((CH₂)₃R_f8)₂ (11c; 97%/96%, two steps) and phosphite P[OC₆H₃((CH₂)₃R_f8)₂]₃ (12c, 92%), from which traces of 11c are difficult to remove. Diol 8d can be similarly elaborated to 11d, but the dialdehyde 9d is labile and the combined yield of the Dess-Martin/Wittig steps is 32%. The CF₃C₆F₁₁/toluene partition coefficients of 11c,d, and 12c (two pony tails; 70:30, 72:28, 92:8) are much higher than those of 4a and b (one pony tail; 12:88, 14:86).     

Chemically modified oximato complexes of titanium(IV) isopropoxide as new precursors for the sol-gel preparation of nano-sized titania: Crystal and molecular structure of [Ti{ONC10H16}4·2CH2Cl2]

Reactions of [Ti(OPrⁱ)₄] with various oximes, in anhydrous refluxing benzene yielded complexes of the type [Ti{OPrⁱ}_4−n{L}_n], where, n = 1-4 and LH = (CH₃)₂CNOH (1-4), C₉H₁₆CNOH (5-8) and C₉H₁₈CNOH (9-12). The compounds were characterized by elemental analyses, molecular weight measurements, FAB-mass, FT-IR and NMR (¹H, ¹³C{¹H}) spectral studies. The FAB-mass spectra of mono- (1), and di- (2), (6), (10) substituted products indicate their dimeric nature and that of tri- (3) and tetra- (4), (8) substituted derivatives suggest their monomeric nature. Crystal and molecular structure of [Ti{ONC₁₀H₁₆}₄·2CH₂Cl₂] (8A) suggests that the oximato ligands bind the metal in a dihapto η²-(N, O) manner, leading to the formation of an eight coordinated species. Thermogravimetric curves of (3), (6) and (10) exhibit multi-step decomposition with the formation of TiO₂ as the final product in each case, at 900 °C. Low temperature (∼600 °C) sol-gel transformations of (2), (3), (4), (6), (7) and (8) yielded nano-sized titania (a), (b), (c), (d), (e) and (f), respectively. Formation of anatase phase in all the titania samples was confirmed by powder XRD patterns, FT-IR and Raman spectroscopy. SEM images of (a), (b), (c), (d), (e) and (f) exhibit formation of nano-grains with agglomer like surface morphologies. Compositions of all the titania samples were investigated by EDX analyses. The absorption spectra of the two representative samples, (a) and (f) indicate an energy band gap of 3.17 eV and 3.75 eV, respectively.     

Synthesis and characterization of new silicon-centred tin-dendrimers Si[CH2CH2SnR3]4. Single-crystal X-ray structure of the tetrahydrofuran adduct of tetrakis[2-(tribromostannyl)ethyl]silane

A series of novel first-generation silicon-centred tin dendrimers Si(CH₂CH₂SnR₃)₄ [R = CH₃ (3), ⁱBu (4), CCCH₃ (5), C₆H₄CH₃-4 (6), C₆H₄OCH₃-4 (7), (CH₂)₄OCH₂CH₂OCH₃ (8), CH₂SiMe₃ (9)] was prepared by the reaction of Si(CH₂CH₂SnBr₃)₄ (2) with the appropriate Grignard reagent or LiCH₂SiMe₃ in tetrahydrofuran. The new compounds were characterized by multinuclear NMR studies (¹H, ¹³C, ¹¹⁹Sn), mass spectrometry (MALDI-TOF, EI) and elemental analyses. The molecular structure of Si[CH₂CH₂SnBr₃(THF)₂]₂[CH₂-CH₂SnBr₃(THF)]₂ (2a) was determined by single-crystal X-ray diffraction.     

Reactivity of 2,3-bis(2-pyridyl)pyrazine with [Re2(CO)8(CH3CN)2]: Molecular structures of [Re2(CO)8(C14H10N4)] and [Re2(CO)8(C14H10N4)Re2(CO)8]

The reaction of the labile compound [Re₂(CO)₈(CH₃CN)₂] with 2,3-bis(2-pyridyl)pyrazine in dichloromethane solution at reflux temperature afforded the structural dirhenium isomers [Re₂(CO)₈(C₁₄H₁₀N₄)] (1 and 2), and the complex [Re₂(CO)₈(C₁₄H₁₀N₄)Re₂(CO)₈] (3). In 1, the ligand is σ,σ′-N,N′-coordinated to a Re(CO)₃ fragment through pyridine and pyrazine to form a five-membered chelate ring. A seven-membered ring is obtained for isomer 2 by N-coordination of the 2-pyridyl groups while the pyrazine ring remains uncoordinated. For 2, isomers 2a and 2b are found in a dynamic equilibrium ratio [2a]/[2b]  =  7 in solution, detected by ¹H NMR (−50 °C, CD₃COCD₃), coalescence being observed above room temperature. The ligand in 3 behaves as an 8e-donor bridge bonding two Re(CO)₃ fragments through two (σ,σ′-N,N′) interactions. When the reaction was carried out in refluxing tetrahydrofuran, complex [Re₂(CO)₆(C₁₄H₁₀N₄)₂] (4) was obtained in addition to compounds 1-3. The dinuclear rhenium derivative 4 contains two units of the organic ligand σ,σ′-N,N′-coordinated in a chelate form to each rhenium core. The X-ray crystal structures for 1 and 3 are reported.     

Reactions of Mo(II)-tetraphosphine complex [MoCl2{meso-o-C6H4(PPhCH2CH2PPh2)2}] with a series of small molecules

Reactions of Mo(II)-tetraphosphine complex [MoCl₂(κ⁴-P4)] (2; P4 = meso-o-C₆H₄(PPhCH₂CH₂PPh₂)₂) with a series of small molecules have been investigated. Thus, treatment of 2 with alkynes RCCR′ (R = Ph, R′ = H; R = p-tolyl, R′ = H; R = Me, R′ = Ph) in benzene or toluene gave neutral mono(alkyne) complexes [MoCl₂(RCCR′)(κ³-P4)] containing tridentate P4 ligand, which were converted to cationic complexes [MoCl(RCCR′)(κ⁴-P4)]Cl having tetradentate P4 ligand upon dissolution into CDCl₃ or CD₂Cl₂. The latter complexes were available directly from the reactions of 2 with the alkynes in CH₂Cl₂. On the other hand, treatment of 2 with 1 equiv. of XyNC (Xy = 2,6-Me₂C₆H₃) afforded a seven-coordinate mono(isocyanide) complex [MoCl₂(XyNC)(κ⁴-P4)] (7), which reacted further with XyNC to give a cationic bis(isocyanide) complex [MoCl(XyNC)₂(κ⁴-P4)]Cl (8). From the reaction of 2 with CO, a mono(carbonyl) complex [MoCl₂(CO)(κ⁴-P4)] (9) was obtained as a sole isolable product. Reaction of 9 with XyNC afforded [MoCl(CO)(XyNC)(κ⁴-P4)]Cl (10a) having a pentagonal-bipyramidal geometry with axial CO and XyNC ligands, whereas that of 7 with CO resulted in the formation of a mixture of 10a and its isomer 10b containing axial CO and Cl ligands. Structures of 7 and 9 as well as [MoCl(XyNC)₂(κ⁴-P4)][PF₆](8′) and [MoCl(CO)(XyNC)(κ⁴-P4)][PF₆] (10a′) derived by the anion metathesis from 8 and 10a, respectively, were determined in detail by the X-ray crystallography.     

Silicon version of enamines: Amino-substituted disilenes by the reactions of the disilyne RSiSiR (R = SiPr[CH(SiMe3)2]2) with amines

The reaction of 1,1,4,4-tetrakis[bis(trimethylsilyl)methyl]-1,4-diisopropyltetrasila-2-yne 1 with secondary or primary amines produced amino-substituted disilenes R(R₂′N)SiSiHR 2a-d (R = SiⁱPr[CH(SiMe₃)₂]₂, R₂′NEt₂N (2a), (CH₂CH₂)₂N (2b), ^tBu(H)N (2c), and Ph₂N (2d)). Spectroscopic and X-ray crystallographic analyses of 2 showed that 2a-c have a nearly coplanar arrangement of the SiSi double bond and the amino group, giving π-conjugation between the SiSi double bond and the lone pair on the nitrogen atom, whereas 2d has a nearly perpendicular arrangement precluding such conjugation. Theoretical calculations indicate that π-conjugation between the π-orbital of the SiSi double bond and the lone pair on the nitrogen atom is markedly influenced by the torsional angle between the SiSi double-bond plane and the amino-group plane.     

New orthopalladated complexes of phosphorus ylides: Crystal structure of [Pd{CH{P(C7H6)(p-tolyl)2}COCH3}Cl{P(p-tolyl)3}]

This work reports on the preparation of the complexes [PdCl₂(Y¹)₂], [PdCl₂(Y²)₂] (Y¹ = (p-tolyl)₃PCHCOCH₃ (1a); Y² = Ph₃PCHCO₂CH₂Ph (1b)), [Pd{CHP(C₇H₆)(p-tolyl)₂COCH₃}(μ-Cl)]₂ (2a), [Pd{CHP(C₆H₄)Ph₂CO₂CH₂Ph}(μ-Cl)]₂ (2b), [Pd{CH{P(C₇H₆)(p-tolyl)₂}COCH₃}Cl(L)] (L = PPh₃ (3a), P(p-tolyl)₃ (4a)) and [Pd{CH{P(C₆H₄)Ph₂}CO₂CH₂Ph}Cl(L)] (L = PPh₃ (3b), P(p-tolyl)₃ (4b)). Orthometallation and ylide C-coordination in complexes 2a–4b are demonstrated by an X-ray diffraction study of 4a.     

Synthesis,crystal structure and magnetic properties of the helical oxalate-bridged copper(II) chain {[(CH3)4N]2[Cu(C2O4)2] · H2O}n

The preparation, crystal structure and magnetic properties of a new oxalate-containing copper(II) chain of formula {[(CH₃)₄N]₂[Cu(C₂O₄)₂] · H₂O}_n (1) [(CH₃)₄N⁺ = tetramethylammonium cation] are reported. The structure of 1 consists of anionic oxalate-bridged copper(II) chains, tetramethylammoniun cations and crystallization water molecules. Each copper(II) ion in 1 is surrounded by three oxalate ligands, one being bidentate and the other two exhibiting bis-bidenate coordination modes. Although all the tris-chelated copper(II) units from a given chain exhibit the same helicity, adjacent chains have opposite helicities and then an achiral structure results. Variable-temperature magnetic susceptibility measurements of 1 show the occurrence of a weak ferromagnetic interaction through the oxalate bridge [J = +1.14(1) cm⁻¹, the Hamiltonian being defined as H = –J ∑_nmS_i · S_j]. This value is analyzed and discussed in the light of available magneto-structural data for oxalate-bridged copper(II) complexes with the same out-of-plane exchange pathway.     

Syntheses and structures of [Me2Si{As(PBu)3}2] and [(CyP)3SiMe2] (Cy = cyclohexyl, C6H11)

The reaction of the anion [(^tBuP)₃As]⁻ (1) with Me₂SiCl₂ results in nucleophilic substitution of the Cl⁻ anions, giving the di- and mono-substituted products [Me₂Si{As(P^tBu)₃}₂] (3a) and [Me₂Si(Cl){As(P^tBu)₃}] (3b). Analogous reactions of the pre-isolated [(CyP)₄As]⁻ anion (2) (Cy = cyclohexyl) with Me₂SiCl₂ produced mixtures of products, from which no pure materials could be isolated. However, reaction of 2 [generated in situ from CyPHLi and As(NMe₂)₃] gives the heterocycle [(CyP)₃SiMe₂] (4). The X-ray structures of 3a and 4 are reported.     

Modeling the platinum-catalyzed intermolecular hydroamination of ethylene: The nucleophilic addition of HNEt2 to coordinated ethylene in trans-PtBr2(C2H4)(HNEt2)

Compound trans-PtBr₂(C₂H₄)(NHEt₂) (1) has been synthesized by Et₂NH addition to K[PtBr₃(C₂H₄)] and structurally characterized. Its isomer cis-PtBr₂(C₂H₄)(NHEt₂) (3) has been obtained from 1 by photolytic dissociation of ethylene, generating the dinuclear trans-[PtBr₂(NHEt₂)]₂ intermediate (2), followed by thermal re-addition of C₂H₄, but only in low yields. The addition of further Et₂NH to 1 in either dichloromethane or acetone yields the zwitterionic complex trans-Pt⁽⁻⁾Br₂(NHEt₂)(CH₂CH₂N⁽⁺⁾HEt₂) (4) within the time of mixing in an equilibrated process, which shifts toward the product at lower temperatures (ΔH° = −6.8 ± 0.5 kcal/mol, ΔS° = 14.0 ± 2.0 e.u., from a variable temperature IR study). ¹H NMR shows that free Et₂NH exchanges rapidly with H-bonded amine in a 4·NHEt₂ adduct, slowly with the coordinated Et₂NH in 1, and not at all (on the NMR time scale) with Pt-NHEt₂ or -CH₂CH₂N⁽⁺⁾HEt₂ in 4. No evidence was obtained for deprotonation of 4 to yield an aminoethyl derivative trans-[PtBr₂(NHEt₂)(CH₂CH₂NEt₂)]⁻ (5), except as an intermediate in the averaging of the diasteretopic methylene protons of the CH₂CH₂N⁽⁺⁾HEt₂ ligand of 4 in the higher polarity acetone solvent. Computational work by DFT attributes this phenomenon to more facile ion pair dissociation of 5·Et₂NH₂⁺, obtained from 4·Et₂NH, facilitating inversion at the N atom. Complex 4 is the sole observable product initially but slow decomposition occurs in both solvents, though in different ways, without observable generation of NEt₃. Addition of TfOH to equilibrated solutions of 4, 1 and excess Et₂NH leads to partial protonolysis to yield NEt₃ but also regenerates 1 through a shift of the equilibrium via protonation of free Et₂NH. The DFT calculations reveal also a more favourable coordination (stronger Pt-N bond) of Et₂NH relative to PhNH₂ to the Pt^II center, but the barriers of the nucleophilic additions of Et₂NH to the C₂H₄ ligand in 1 and of PhNH₂ to trans-PtBr₂(C₂H₄)(PhNH₂) (1a) are predicted to be essentially identical for the two systems.     

Synthesis, structures and preliminary biological screening of bis(diphenyl)chlorotin complexes and adducts: Ph2ClSn-CH2-R-CH2-SnClPh2, R = p-C6H4, CH2CH2

The reaction between ClCH₂-R-CH₂Cl, R = p-C₆H₄, and [Ph₃Sn]⁻Li⁺ yields Ph₃Sn-CH₂-R-CH₂-SnPh₃ (1) in high yield. The related known compound R = CH₂CH₂ (1a) is synthesized by the reaction of the di-Grignard reagent BrMg(CH₂)₄MgBr with two equivalents of Ph₃SnCl. Cleavage of a single Sn-Ph group at each tin centre of both compounds using HCl/Et₂O yields the corresponding bis-chlorostannanes Ph₂ClSn-CH₂-R-CH₂-SnClPh₂, R = (CH₂)₄ (2) and R = C₆H₄ (3), respectively. Compounds 1, 2 and 3 are crystalline solid materials and their single crystal X-ray structures are reported. In the solid state both 2 and 3 form self-assembled ladder structures involving alternating intermolecular Cl-Sn?Cl and Cl?Sn-Cl bonded chains at both ends of the distannanes with 5-coordinate tin atoms. Recrystallization of 3 from CH₂Cl₂ in the presence of DMF yields the bis-DMF adduct (4) in which no self-assembled structures were noted. Evaluation of the chlorostannanes 2 and 3 against a suite of bacteria, Staphylococcus aureus, Escherichia coli and Photobacterium phosphoreum is reported and compared to the related mono-chlorostannanes Ph₂(CH₃)SnCl and Ph₂(PhCH₂)SnCl.     

Syntheses of rac/meso-{PhP(3-t-Bu-C5H3)2}-Zr{RN(CH2)3NR}, structural analyses of rac-{PhP(3-t-Bu-C5H3)2}Zr{RN(CH2)3NR} (where R is SiMe3 or Ph), and meso to rac isomerization

Syntheses of rac/meso-{PhP(3-t-Bu-C₅H₃)₂}Zr{Me₃SiN(CH₂)₃NSiMe₃} (rac-3/meso-3) and rac/meso-{PhP(3-t-Bu-C₅H₃)₂}Zr{PhN(CH₂)₃NPh} (rac-4/meso-4) were achieved by metallation of K₂[PhP(3-t-Bu-C₅H₃)₂] · 1.3 THF (2) with Zr{RN(CH₂)₃NR}Cl₂(THF)₂ (where R = SiMe₃ or Ph, respectively) using ethereal solvent. These isomeric pairs were characterized by ¹H, ¹³C{¹H}, and ³¹P{¹H} NMR spectroscopy; rac-3 and rac-4 were also examined via single crystal X-ray crystallography. The structures of rac-3 and rac-4 are notable in the tendency of the cyclopentadienyl rings towards η³ coordination. While isolated samples of rac-3/meso-3 and rac-4/meso-4 slowly isomerize in tetrahydrofuran-d₈ to equilibrium ratios, the isomerization rate for 3 is more than 15-fold greater than that for 4. In addition, equilibrium ratios are rapidly reached when isolated samples of rac-3/meso-3 and rac-4/meso-4 are exposed to tetrabutylammonium chloride in tetrahydrofuran-d₈ solvent. We propose that a nucleophile (either chloride or the phosphine interannular linker) brings about dissociation of one cyclopentadienyl ring, thus promoting the rac/meso isomerization mechanism.     

One-dimensional chains in uranyl tungstates: Syntheses and structures of A8[(UO2)4(WO4)4(WO5)2] (A=Rb, Cs) and Rb6[(UO2)2O(WO4)4]

Three new uranyl tungstates, A₈[(UO₂)₄(WO₄)₄(WO₅)₂] (A=Rb (1), Cs (2)), and Rb₆[(UO₂)₂O(WO₄)₄] (3), were prepared by high-temperature solid-state reactions and their structures were solved by direct methods on twinned crystals, refined to R₁=0.050, 0.042, and 0.052 for 1, 2, and 3, respectively. Compounds 1 and 2 are isostructural, monoclinic P2₁/n, (1): a=11.100(7), b=13.161(9), , β=90.033(13)°, , Z=8 and (2): , , , β=89.988(2)°, , Z=8. There are four symmetrically independent U⁶⁺ sites that form linear uranyl [O=U=O]²⁺ cations with rather distorted coordination in their equatorial planes. There are six W positions: W(1) and W(2) have square-pyramidal coordination (WO₅), whereas W(3), W(4), W(5), and W(6) are tetrahedrally coordinated. The structures are based upon a novel type of one-dimensional (1D) [(UO₂)₄(WO₄)₄(WO₅)₂]⁴⁻ chains, consisting of WU₄O₂₅ pentamers linked by WO₄ tetrahedra and WO₅ square pyramids. The chains run parallel to the a-axis and are arranged in modulated pseudo-2D-layers parallel to (0 1 0). The A⁺ cations are in the interlayer space between adjacent pseudo-layers and provide a 3D integrity of the structures. Compounds 1 and 2 are the first uranyl tungstates with 2/3 of W atoms in tetrahedral coordination. Such a high concentration of low-coordinated W⁶⁺ cations is probably responsible for the 1D character of the uranyl tungstate units. The compound 3 is triclinic, P1¯ a=10.188(2), b=13.110(2), , α=97.853(3), β=96.573(3), γ=103.894(3)°, , Z=4. There are four U positions in the structure with a typical coordination of a pentagonal bipyramid that contain uranyl ions, UO₂²⁺, as apical axes. Among eight W sites, the W(1), W(2), W(3), W(4), W(5), and W(6) atoms are tetrahedrally coordinated, whereas the W(7) and W(8) cations have distorted fivefold coordination. The structure contains chains of composition [(UO₂)₂O(WO₄)₄]⁶⁻ composed of UO₇ pentagonal bipyramids and W polyhedra. The chains involve dimers of UO₇ pentagonal bipyramids that share common O atoms. The dimers are linked into chains by sharing corners with WO₄ tetrahedra. The chains are parallel to [−101] and are arranged in layers that are parallel to (1 1 1). The Rb⁺ cations provide linkage of the chains into a 3D structure. The compound 1 has many structural and chemical similarities to its molybdate analog, Rb₆[(UO₂)₂O(MoO₄)₄]. However, the compounds are not isostructural. Due to the tendency of the W⁶⁺ cations to have higher-than-fourfold coordination, part of the W sites adopt distorted fivefold coordination, whereas all Mo atoms in the Mo compound are tetrahedrally coordinated. Distribution of the WO₅ configurations along the chain extension does not conform to its ‘typical’ periodicity. As a result, both the chain identity period and the unit-cell volume are doubled in comparison to the Mo analog, which leads to a new structure type.     

Synthesis and crystal structure of Ru-supported tungstoantimonate [Sb2W20Ru2(H2O)2(dmso)6O68]

The first Ru^III-supported tungstoantimonate [Ru^II(bpy)₃]₂[Sb₂W₂₀Ru^III₂(H₂O)₂(dmso)₆O₆₈]·3dmso (bpy=bi-pyridine) (1a) has been successfully isolated as [Ru(bpy)₃]²⁺ (Rubpy) salt by routine synthetic reaction in mixed solutions with dmso and water. Single-crystal X-ray analysis was carried out on 1a, which crystallizes in the triclinic system space group P-1 with a=16.804 (6), b=16.988 (6), c=17.666 (6) Å, α=107.397 (13)°, β=106.883 (13)°, γ=103.616 (12)°. V=4309 (3) Å³, Z=1 with R1=0.0773. The compound 1a reveals the following features: (1) Rubpy is firstly used as an alternative ruthenium-source for the synthesis of Ru-substituted heteropolytungstate; (2) the structure of 1a consists of four Ru^III-O-S(CH₃)₂ and two W-O-S(CH₃)₂ bonds resulting in an assembly with C₂ symmetry; (3) the Ru^III ions are linked to two dmso groups via two Ru^III-O-S(CH₃)₂ bonds, which represents the other dmso-coordination mode to Ru^III in POM chemistry. The cyclic voltammetry studies of 1a in dmso/H₂SO₄ (3/1 v/v) at pH 2.5 medium using the glassy carbon electrode as a working electrode show the respective electrochemical behaviors of the W-centers and the Ru-centers within 1a, which could be separated clearly. In addition, the compound 1a exhibits photoluminescence arising from π*−t_2g ligand-to-metal transition of Rubpy.     

Novel sandwich complexes of zirconium [C9H5(SiMe3)2](C5Me4R)ZrCl2 (R = CH3, CH2CH2NMe2): Synthesis and reduction behavior

Novel half-sandwich [C₉H₅(SiMe₃)₂]ZrCl₃ (3) and sandwich [C₉H₅(SiMe₃)₂](C₅Me₄R)ZrCl₂ (R = CH₃ (1), CH₂CH₂NMe₂ (2)) complexes were prepared and characterized. The reduction of 2 by Mg in THF lead to (η⁵-C₉H₅(SiMe₃)₂)[η⁵:η²(C,N)-C₅Me₄CH₂CH₂N(Me)CH₂]ZrH (7). The structure of 7 was proved by NMR spectroscopy data. Hydrolysis of 2 resulted in the binuclear complex ([C₅Me₄CH₂CH₂NMe₂]ZrCl₂)₂O (6). The crystal structures of 1 and 6 were established by X-ray diffraction analysis.     

Study of ferrocenyl-substituted Co2(CO)6-bispropargylic alcohol complexes as substrates for the formation of chains and macrocycles

Treatment of [Fc-1-R¹-1′-R²] (R¹ = H, R² = CH(O); R¹ = H, R² = CMe(O); R¹ = R² = CMe(O)) with LiCCCH₂OLi (prepared in situ from HCCCH₂OH and n-BuLi) affords the ferrocenyl-substituted but-2-yne-1,4-diol compounds of general formula [Fc-1-R¹-1′-{CR(OH)CCCH₂OH}] (R¹ = R = H (1a); R¹ = H, R = Me (1b); R¹ = CMe(O), R = Me (1c)) in low to high yields, respectively (where Fc = Fe(η⁵-C₅H₄)₂). In the case of the reactions of [Fc-1-R¹-1′-R²] (R¹ = H, R² = CH(O); R¹ = R² = CMe(O)), the by-products [Fc-1-R¹-1′-{CR(OH)(CH₂)₃CH₃}] (R¹ = R = H (2a); R¹ = CMe(O), R = Me (2c)) along with minor quantities of [Fc-1,1′-{CMe(OH)(CH₂)₃CH₃}₂] (3) are also isolated; a hydrazide derivative of dehydrated 2c, [1-(CMeCHCH₂CH₂CH₃)-1′-(CMeNNH-2,4-(NO₂)₂C₆H₃)] (2c′), has been crystallographically characterised. Interaction of 1 with Co₂(CO)₈ smoothly generates the alkyne-bridged complexes [Fc-1-R¹-1′-{Co₂(CO)₆-μ-η²-CR(OH)CCCH₂OH}] (R¹ = R = H (4a); R¹ = H, R = Me(4b); R¹ = CMe(O), R = Me (4c)) in good yield. Reaction of 4a with PhSH, in the presence of catalytic quantities of HBF₄ · OEt₂, gives the mono- [Fc-1-H-1′-{Co₂(CO)₆-μ-η²-CH(SPh)CCCH₂OH}] (5) and bis-substituted [Fc-1-H-1′-{Co₂(CO)₆-μ-η²-CH(SPh)CCCH₂SPh}] (6) straight chain species, while with HS(CH₂)_nSH (n = 2,3) the eight- and nine-membered dithiomacrocylic complexes [Fc-1-H-1′-{cyclo-Co₂(CO)₆-μ-η²-CH(S(CH₂)_n-)CCCH₂S-}] [n = 2 (7a), n = 3 (7b)] are afforded. By contrast, during attempted macrocyclic formation using 4b and HSCH₂CH₂OCH₂CH₂SH dehydration occurs to give [Fc-1-H-1′-{Co₂(CO)₆-μ-η²-C(CH₂)CCCH₂OH}] (8). Single crystal X-ray diffraction studies have been reported on 2c′, 4b, 4c, 7b and 8.     

Synthesis, characterization, and substituent effects of mononuclear ruthenium complexes [RuCl(CO)(PMe3)3(CHCH-C6H4-R-p)] (R = H, CH3, OCH3, NO2, NH2, NMe2)

A series of mononuclear ruthenium complexes [RuCl(CO)(PMe₃)₃(CHCH-C₆H₄-R-p)] (R = H (2a), CH₃ (2b), OCH₃ (2c), NO₂ (2d), NH₂ (2e), NMe₂ (2f)) has been prepared. The respective products have been characterized by elemental analyses, NMR spectrometry, and UV-Vis spectrophotometry. The structures of complexes 2c and 2d have been established by X-ray crystallography. Electrochemical studies have revealed that electron-releasing substituents facilitate monometallic ruthenium complex oxidation, and the substituent parameter values (σ) show a strong linear correlation with the anodic half-wave or oxidation peak potentials of the complexes.     

Rhodium(I) carbonyl complexes of tetradentate chalcogen functionalized phosphines, [P(X)(CH2CH2P(X)Ph2)3] {X = O, S, Se}: Synthesis, reactivity and catalytic carbonylation reaction

The reaction of [Rh(CO)₂Cl]₂ with 0.5 mol equivalent of the ligands [P^′(X)(CH₂-CH₂P(X)Ph₂)₃](P^′P₃X₄) {where X = O(a), S(b) and Se(c)} affords tetranuclear complexes of the type [Rh₄(CO)₈Cl₄(P^′P₃X₄)] (1a-1c). The complexes 1a-1c have been characterized by elemental analyses, mass spectrometry, IR and multinuclear NMR spectroscopy, and the ligands b and c are structurally determined by single crystal X-ray diffraction. 1a-1c undergo oxidative addition (OA) reactions with CH₃I to generate Rh(III) oxidised products. Kinetic data for the reaction of 1a and 1b with excess CH₃I indicate a pseudo first order reaction. The catalytic activity of 1a-1c for the carbonylation of methanol to acetic acid and its ester show a higher Turn Over Frequency (TOF = 1349-1748 h⁻¹) compared to the well-known species [Rh(CO)₂I₂]⁻ (TOF = 1000 h⁻¹) under the similar experimental conditions. However, 1b and 1c exhibit lower TOF than 1a, which may be due to the desulfurization and deselinization of the ligands in the respective complexes under the reaction conditions.