Structure and conformation of 2,3,4-triphenyl-1-oxa-4-azabutadiene

2,3,4-triphenyl-1-oxa-4-azabutadine (C20H15NO) has been studied by X-ray analysis and AM1 molecular orbital methods. It crystallises in the triclinic space group P-1 with a=9.414(3), b=10.479(3), c=8.385(2) Å, =103.31(3)°, β=97.10(3)°, γ=74.09(1)°, V=772.5(4) ų, Z=2, D_c=1.227 gcm⁻³, and μ(MoK)=0.075 mm⁻¹ and F₀₀₀=300. The structure was solved by direct methods and refined to R=0.043 for 2672 reflections [I>2σ(I)]. The conformational analysis of the title compound were investigated by semi-empirical quantum mechanical AM1 calculations. The minimum conformation energies were calculated as a function of the three torsion angles θ₁(O(1)C(7)C(8)N(1)), θ₂(C(8)N(1)C(15)C(16)) and θ₃(C(14)C(9)C(8)N(1)). The results are compared with the X-ray results. C=O and C=N groups are twisted about each other by 95.5(2)°.     

Application of the ISM EoS for polymer solutions and blends

A method for predicting an analytical equation of state for polymer mixtures and blends from surface tension and liquid state density at normal (ordinary) temperature (γ_n, ρ_n), as scaling constants, is presented. B₂(T) follows a promising corresponding-states principle. Calculation of (T) and b(T), the two other temperature-dependent constants of the equation of state, are made possible by scaling. As a result, γ_n and ρ_n are sufficient for determination of thermophysical properties of polymer mixtures and blends.

We applied the procedure to predict liquid density of poly(ethylene glycol) (PEG-200) + 1-octanol solutions and poly(propylene glycol) (PPG) + poly(ethylene glycol) (PEG-200) blends at compressed state with temperature range from 298.15 to 338.15 K and pressures up to 40 MPa. In this work, the ISM EoS is extended to polymer mixtures and blends as well as pure case without proposing any mixing rule.     

Influence of temperature on surface tension of three liquid crystal polymers and polyethylene terephtalate

In this work Pressure Volume Temperature (PVT) data for three different liquid crystal polymers (LCPs), namely Vectra A950^® and two LCPs based on 4,4'-dihydroxybiphenyl (PB-n) (where n is the number of methylene units present in the polymer) and polyethylene terephtalate (PET), were obtained for temperatures ranging from 50 to 300°C and pressures ranging from 0.1 to 200 MPa. The experimental data were fitted to the Flory-Orwoll-Vrij equation of state and used to predict the influence of temperature on the surface tension of the four materials studied.

The surface tension of PET was shown to decrease linearly with increasing temperature. The surface tension of both PB-11 (γ_PB-11) and Vectra A950^® (γ_Vectra) decreased linearly with increasing temperature for temperatures corresponding to the nematic phases of the materials. Abnormal behaviour was observed for the surface tension of PB-8 (γ_PB-8): at temperatures just above T_b (the temperature at which the material became birefringent), γ levelled off and then decreased. A clear discontinuity was observed for both γ_PB-8 and γ_PB-11 near the mesophase to isotropic transition. For both PB-8 and PB-11, γ decreased linearly with increasing temperature for temperatures corresponding to the isotropic phases of the materials.     

Gradient expansion of the kinetic energy density functional: Local behavior of the kinetic energy density

Calculations with Hartree—Fock electron densities for the rare gas atoms He through Xe show that the gradient expansion for the kinetic energy functional, T[] = T₀[] + T₂[] + T₄[] + … = ∫t() dτ, approximates the kinetic energy by averaging over the shell structure present in the true local kinetic energy density, t(), and that the accuracy of the gradient expansion improves with increasing atomic number. Components of t(), t₀(), t₂() and t₄(), are exhibited and discussed. The defined function t() is everywhere positive.     

Comparison of optical properties and crystal structures of the praseodymium and europium chloroderivatives of acetates

The praseodymium and europium dichloroacetates were obtained in the form of monocrystals. Crystal structures of the Ln(HCl₂CCOO)₃·2H₂O (Ln=Pr, Eu) compounds were determined by X-ray analysis. Both crystals proved to be isomorphous. They are monoclinic, space group P2₁/n with: a=9.747(6), b=13.857(7), and c=23.595(9) Å, β=95.03(4)°, U=3175(3) Å³, Z=8 for C₆H₇Cl₆O₈Pr and a=9.634(7), b=13.757(11), and c=23.524(14) Å, β=94.84(4)°, U=3107(4) Å³, Z=8 for C₆H₇Cl₆O₈Eu. There are two symmetry independent lanthanide cations, which adopt a nine-coordinate geometry with seven oxygen atoms from carboxylate groups and two oxygen atoms from water molecules. Absorption (Pr³⁺, Eu³⁺), emission and emission excitation (Eu³⁺) spectra of single crystals of Ln(HCl₂CCOO)₃·2H₂O were recorded at room temperature and low temperatures down to 4.2 K. Spectral intensities of the investigated systems are parametrized in terms of the Judd–Ofelt theory and compared to those of lanthanide trichloroacetates and acetates crystals. The relationship between the hypersensitivity and covalency is discussed. The nephelauxetic ratio β and Sinha's parameter δ are calculated based on the absorption spectra. The variation of these parameters and their correlation with the nature of metal–ligand bond is discussed. The bond polarity and bond strength of coordination complex determine the activity and stereospecifity of the catalyst thus the study of these properties are very important because of the application of lanthanide carboxylates as precursors of catalysts. The spectroscopic results are correlated with those from the crystal structure studies, especially with Ln–O distances and the co-ordinating forms of the carboxylate ions. The vibronic coupling in the f–f transitions were analysed. In order to determine the vibronic coupling quantitatively, calculations of the R=I_VIB./I_0-phonon rates were performed from the low temperature absorption spectra. The correlation between the vibronic coupling and covalency is analysed.     

Synthesis of a novel copper(II) complex and its crystal structure

One novel chiral copper(II) complex was successfully synthesized from the reaction of chiral 1,3-thiazolidine-2-thione ligand with CuCl₂ in dichloromethane in the presence of Et₃N and DMAP at room temperature. Its unique crystal structure was unambiguously disclosed by X-ray analysis. The crystal is tetragonal, space group I4(1), space group a=15.0875(11), b=15.0875(11), c=19.362(3) Å, =90, β=90, γ=90°, V=4407.4(8) ų, Z=8, ρ_calc=1.639 mg cm⁻³.     

Syntheses and structural determination of nine-coordinate K3[Nd(nta)2(H2O)]·6H2O and K3[Er(nta)2(H2O)]·5H2O

The syntheses and structural determination of Nd^III and Er^III complexes with nitrilotriacetic acid (nta) were reported in this paper. Their crystal and molecular structures and compositions were determined by single-crystal X-ray structure analyses and elemental analyses, respectively. The crystal of K₃[Nd^III(nta)₂(H₂O)]·6H₂O complex belongs to monoclinic crystal system and C2/c space group. The crystal data are as follows: a=1.5490(11) nm, b=1.3028(9) nm, c=2.6237(18) nm, β=96.803(10)°, V=5.257(6) nm³, Z=8, M=763.89, D_c=1.930 g cm⁻³, μ=2.535 mm⁻¹ and F(000)=3048. The final R₁ and wR₁ are 0.0390 and 0.0703 for 4501 (I>2σ(I)) unique reflections, R₂ and wR₂ are 0.0758 and 0.0783 for all 10474 reflections, respectively. The Nd^IIIN₂O₇ part in the [Nd^III(nta)₂(H₂O)]³⁻ complex anion has a pseudo-monocapped square antiprismatic nine-coordinate structure in which the eight coordinate atoms (two N and six O) are from the two nta ligands and a water molecule coordinate to the central Nd^III ion directly. The crystal of the K₃[Er^III(nta)₂(H₂O)]·5H₂O complex also belongs to monoclinic crystal system and C2/c space group. The crystal data are as follows: a=1.5343(5) nm, b=1.2880(4) nm, c=2.6154(8) nm, b=96.033(5)°, V=5.140(3) nm³, Z=8, M=768.89, D_c=1.987 g cm⁻³, μ=3.833 mm⁻¹ and F(000)=3032. The final R₁ and wR₁ are 0.0321 and 0.0671 for 4445 (I>2σ(I)) unique reflections, R₂ and wR₂ are 0.0432 and 0.0699 for all 10207 reflections, respectively. The Er^IIIN₂O₇ part in the [Er^III(nta)₂(H₂O)]³⁻ complex anion has the same structure as Nd^IIIN₂O₇ part in which the eight coordinate atoms (two N and six O) are from the two nta ligands and a water molecule coordinate to the central Nd^III ion directly.     

Comprehensive study of positronium formation in polymer blends between polyethylene and ethylene-vinylacetate copolymer

The intensity I₃ of ortho-positronium (o-Ps) in a polymer blend system consisting of polyethylene (PE) and ethylene-vinylacetate (EVA, random copolymer with a vinylacetate content of about 14%) was measured as functions of EVA weight content (Φ=0–100%), electric field (E=0–60 kV/cm ), positron irradiation time (t=0–200 h) and temperature (T=100–300 K). It was found that the addition of small amounts of EVA to PE significantly alters the electric field, positron irradiation time and temperature dependence of I₃. Positron trapping on polar EVA is suggested to be responsible for the sensitive effects of EVA.     

Molecular weights of polystyrenes in toluene solutions by light scattering. Comparison between classical values and values deduced from a new method

Light scattering measurements in toluene solutions are performed for a series of monodisperse polystyrenes with a molecular weight M_w range from 4×10³ to 8×10⁶. The scattered polarized intensities I_v and the natural depolarization ratios ρ_n are registered with different apparatus at λ=633 or 488 nm and the M_w values are deduced through different formulae. The complete Carr and Zimm formula (CL_a), from I_v and ρ_n, and the usual simplified formula (CL_b), from I_v, are considered for the classical method. An already demonstrated formula is considered for the new method (New). Values of M_w and related parameters do not depend on the experimental systems used but deviations appear when using different formulae. The deviations are generally low (about 10%) but often systematic: M_w(CL_a)<M_w(CL_b)<M_w(New). The most important difference concerns the effect of destructive interferences for M_w>5×10⁵: the new formula leads to a lower increase from θ=90° to θ→0 for M_w values (θ is the observation angle). For instance, in the 8×10⁶ sample, M_w(θ→0)/M_w(θ=90°)=3.6 instead of 6.1, which implies a revision of the usual determination of the radius of gyration, R_g.     

Solvent effect on distribution ratio of Pd(II) in supercritical carbon dioxide extraction and solvent extraction using 2-methyl-8-quinolinol

The distribution ratio (D_M) of Pd(II) by the extraction with 2-methyl-8-quinolinol (HMQ) was determined using the supercritical carbon dioxide medium (SF-CO₂) and organic solvent media such as perfluoro-methylcyclohexane, heptane, cyclohexane, carbon tetrachloride and benzene. From experimental results of the slopes of log D_M versus pH plot and log D_M versus HMQ concentration plot, the extracted species both in the SF-CO₂ extraction (SFE) and the solvent extraction (SE) were determined to be Pd(MQ)₂. The distribution constant of HMQ (K_D,HMQ) in the SFE and SE systems were determined from the dependence of the distribution ratio of HMQ (D_HMQ) on the pH. A linear relationship was observed between log K_D,HMQ and the solubility parameter (δ) of the extraction medium based on the regular solution theory in both the SFE using SF-CO₂ at the pressure of 8.5–40 MPa and the SE systems. The difference in the slope of the log K_D,HMQ versus δ plot between the SFE and the SE systems is attributable to the extent of the specific interaction of the solute HMQ with the solvent molecules, i.e. CO₂ molecules and the organic solvent molecules. The D_M versus δ plot obtained under a given extraction condition using SF-CO₂ (11–40 MPa) and organic solvents showed clear linearity. The D_M obtained using SF-CO₂ at relatively low pressure range from 8.5 to 11 MPa was independent of the pressure and the δ of SF-CO₂, which coincides with the experimental fact that the solubility of Pd(MQ)₂ in the SF-CO₂ at 8.5–11 MPa was practically constant.     

Binding of acrylic and sulphonic polyanions by open-chain polyammonium cations

The interactions between some acrylic and sulphonic polyanions and some protonated amines (diamines NH₂-(CH₂)_x-NH₂, x=2,…,10; linear tri-, tetra-, penta- and hexa-amines) were studied potentiometrically in aqueous solution, at 25°C. For both types of polyanions AL₂H_i (L⁻, monomer of polyanion, A, amine) species are formed, with i=1,…,n (n=number of amino groups in the amine). The stability of these species is strictly dependent on the polyammonium cation charge, and fairly independent of the type of amine (in diamine species maximum stability is observed for x=4, 5). Acrylic and sulphonic polyanion complexes are considerably stronger than analogous species formed by low molecular weight anions. Mean stability can be expressed as log K=2.87ζ^2/3, for polyacrylic anions and log K=2.42ζ^2/3 for polysulphonic anions (ζ=absolute value for charge product of reactants).     

A simple method for predicting the frequency of the infrared inactive carbonyl stretching mode in LM(CO)5 molecules with C4V symmetry

The paper presents a new method for predicting the frequency of the b₁ mode, which is infrared-inactive, in complexes of the type LM(CO)₅ belonging to C_4V point group. The method was based on the relation λ₃=λ₄+[(1−δ/δ)](λ₁−λ₂), where δ=(λ₁−λ₂)/(λ₁−λ₂+λ₃−λ₄), λ₁, λ₂, λ₃ and λ₄ are the λ parameters of the , , b₁ and e modes, respectively. For a large numbers of complexes of the type LM(CO)₅ the average value of δ was found to be 0.80, with a standard deviation of 0.02. With the use of average value of δ, the frequencies of b₁ mode were estimated. The result obtained indicated that there exists a rather good fit between observed and calculated frequencies, with a mean error of 2.7 cm⁻¹. In addition, it was shown that the δ parameter can be used as a criterion of the correct band assignment for the complexes understudy.     

Transport phenomenon as a function of counter and co-ions in solution: chronopotentiometric behavior of anion exchange membrane in different aqueous electrolyte solutions

Anion exchange membrane has been investigated in different electrolyte solutions by chronopotentiometry to explore the influence of co-ion and counterion of the exchange group of the membrane, on the transport phenomena. Chloride, nitrate, sulfate and acetate in sodium salts were used as counterions and sodium, potassium, calcium and ammonium in chloride salts were used as co-ions. The membrane showed a potential drop (E₀) in all these electrolytes when a constant current was applied across it, which remained constant for a period less than τ, called the transition time and rose gradually to a maximum (E_max) value. The parameters such as τ, E₀ and E_max and the potential jump (ΔE) and τ and the inflection zone (Δt) along the time axis have been measured and compared at an applied current density (I) of 10 mA cm⁻² in 10 mM solutions. The values of τ^1/2/z_A[A₀] or τ^1/2/z_C[C₀], with or , E₀ and ΔE with or (where r_A and r_C are the ionic radii of counter and co-ions, respectively) have been correlated. Permselectivity (P) and transference number of the membrane with respect to each one of the above electrolytes have been evaluated and discussed.     

The temperature dependence of the two positronium bubble states in liquid SF6

Positron lifetime measurements have been performed on liquid SF₆ in the temperature range from −45°C to 71°C (T_c = 45.65°C). The positron lifetime spectra were resolved into four lifetime components. In the order of increasing lifetimes the four lifetime components are associated with the decay of para-positronium (p-Ps), free positrons, ortho-positronium (o-Ps) from a small bubble state, and o-Ps from a large bubble state. The lifetime of o-Ps annihilating from the large bubble state τ₄ increases from 5.7 ns at −45°C to 19.5 ns at 53°C. The lifetime of o-Ps annihilating from the small bubble state τ₃ was found to be 2–2.5 ns in the main part of the temperature range studied. Apparently, this is the first observation of two different o-Ps states in a liquid. The intensity I₄ (I₃) increases (decreases) from 16.9% (16%) at −45°C to 47.2% (6.4%) at the critical point while above I₃ and I₄ are essentially temperature independent. The large Ps bubble state seems to be similar to the Ps bubble state found in most liquids.     

Nuclear quadrupole resonance in 2,4-dinitrochlorobenzene

A study of the spin lattice relaxation (T₁) and the nuclear quadrupole resonance frequency (ν_Q) gives an important information about the dynamics of molecular groups in molecular solids. In the present paper, we analyze the contributions of the reorientational motion of nitro groups of 2,4-dinitrochlorobenzene to the NQR parameters of the chlorine nucleus in the molecule.

We found two contributions to T₁ and ν_Q due to the onset of the reorientation of nitro groups in the molecule; one of these contributions is mostly due to intermolecular effects in the crystal. For the chlorine nuclei, the efficiency of the modulation mechanism is usually provided by the change of the electric field gradient due to the moving molecular group; this gives us a way of how to assign each contribution to T₁ from the ortho and para positions of the NO₂ groups in the molecule. It is observed that there are two different potential barriers depending on the position of the nitro groups in the molecule. The behavior in the temperature dependence of the line width shows a thermal history dependence of the molecular crystal.     

Thermoelectric properties of perovskites: Sign change of the Seebeck coefficient and high temperature properties

The possibility to change the Seebeck coefficient sign has been evidenced in the LaCoO₃ perovskites. A small hole doping (Co³⁺/Co⁴⁺) will result in a large positive Seebeck coefficient, while a small electron doping (Co²⁺/Co³⁺) will give a large negative Seebeck coefficient at room temperature. This mechanism is shown to be efficient as well in 1D Ca₃Co₂O₆ deriving from hexagonal perovskites. By doping Ca₃Co₂O₆ with Ti⁴⁺, a mixed valency Co²⁺/Co³⁺ is introduced and the thermopower turns negative.

At high temperature, the Seebeck coefficients of LaCoO₃ and related compounds decrease to small values due to the spin state transition. The values converge towards a positive value, close to +20 μV/K at 800 K. This suggests that at high T, the Seebeck coefficients in the case of localized charges do not depend on the doping, but only on the spin and orbital degeneracies. On the other hand, in the case of metallic-like samples as electron-doped manganites, the properties can be described up to high T in terms of a single-band metal. Due to the linear variation of S as a function of T and the almost constant value of ρ, the ratio S²/ρ which is crucial for high temperature applications increases.     

Potentiometric study of Cu(II) and Ni(II) complexation with two high molecular weight poly(acrylic acids)

The copper (II) or nickel (II) complex formation with two poly(acrylic acids) of high molecular weight (Mw=2.5×10⁵ and 3×10⁶) was investigated in aqueous dilute solution (NaNO₃ 0.1 mol l⁻¹; 25°C). Potentiometric titrations were carried out, first to precise the acid-base properties of the two polymers, and secondly to determine the stability constants of the MA and MA₂ complex species formed. The Bjerrum's method, modified by Gregor et al. (J. Phys. Chem., 59 (1955) 34–39), for the study of polymeric acids was used. The results obtained showed that both polymers present very similar properties. As expected, copper (II) is more readily bound to poly(acrylic acids). CuA₂ was the predominant observed species; the global stability constant log β₁₀₂ was found to be close to 6.6. With nickel (II), none of the complex species MA or MA₂ becomes predominant (log β₁₀₂=5.5). Finally, the PAA complexes present a greater stability compared with that of monomeric analogs.     

Synthesis and crystal structure of two novel nickel (imidazole) complexes having hydrogen-bonded networks

Two nickel (imidazole) complexes, Ni(im)₆Cl₂·4H₂O (1) and Ni(im)₆(NO₃)₂ (2) (im=imidazole) have been synthesized and characterized by elemental analysis, IR, UV, TG and single crystal X-ray diffraction. 1 crystallizes in the triclinic space group P-1 with a=8.800(6) Å, b=9.081(6) Å, c=10.565(7) Å, =75.058(9)°, β=83.143(8)°, γ=61.722(8)°, V=718.3(8) Å³, Z=1 and R₁ (wR₂)=0.0469 (0.1497). 2 crystallizes in the trigonal space group R-3 with a=12.370(6) Å, b=12.370(6) Å, c=14.782(14) Å, =90.00°, β=90.00°, γ=120.00°, V=1959(2) Å³, Z=3 and R₁ (wR₂)=0.0358 (0.0955). 1 and 2 exhibit different supramolecular network due to their different counter anions and different hydrogen bonding connection. In compound 1, [Ni(im)₆]²⁺ cation and counter anions Cl⁻ alternatively array in an ABAB fashion via N–HCl hydrogen bonding. In compound 2, the plane of each NO₃²⁻ is almost parallel and each NO₃²⁻ connect three different [Ni(im)₆]²⁺ cations via N–HO hydrogen bonding.     

Thermogravimetric study on perovskite-like oxygen permeation ceramic membranes

The oxygen permeation properties of mixed-conducting ceramics SrFeCo_0.5O_3−δ (SFCO), Ba_0.5Sr_0.5Co_0.8Fe_0.2O_3−δ (BSCFO), La_0.2Sr_0.8Co_0.8Fe_0.2O_3−δ (LSCFO) and Ba_0.95Ca_0.05Co_0.8Fe_0.2O_3−δ (BCCFO) were studied by thermogravimetric method in the temperature range 600–900 °C. The results show that the oxygen adsorption rate constants k_a of all material are larger than oxygen desorption rate constants k_d and both k_a and k_d are not strongly dependent on temperature in the studied temperature range. The oxygen vacancy contents δ(N₂) and δ(O₂) in nitrogen and oxygen and their difference Δδ = δ(N₂) − δ(O₂) play an important role in determining the temperature behavior of oxygen permeation flux J_O2.