Cathodic electrodeposition of ceramic and organoceramic materials. Fundamental aspects

Electrodeposition of ceramic materials can be performed by electrophoretic (EPD) or electrolytic (ELD) deposition. Electrophoretic deposition is achieved via motion of charged particles towards an electrode under an applied electric field. Electrolytic deposition produces colloidal particles in cathodic reactions for subsequent deposition. Various electrochemical strategies and deposition mechanisms have been developed for electrodeposition of ceramic and organoceramic films, and are discussed in the present article. Electrode-position of ceramic and organoceramic materials includes mass transport, accumulation of particles near the electrode and their coagulation to form a cathodic deposit. Various types of interparticle forces that govern colloidal stability in the absence and presence of processing additives are discussed. Novel theoretical contributions towards an interpretation of particle coagulation near the electrode surface are reviewed. Background information is given on the methods of particle charging, stabilization of colloids in aqueous and non-aqueous media, electrophoretic mobility of ceramic particles and polyelectrolytes, and electrode reactions. This review also covers recent developments in the electrodeposition of ceramic and organoceramic materials.     

Colloidal chemistry as a guide to design intended dispersions of carbon nanomaterials

In this review, some established concepts from Colloidal Science and their application to graphene and carbon nanotubes dispersions in organic or aqueous media are highlighted to rationalize alternatives for some issues in terms of colloidal properties. Recent applications for carbon-based dispersions are presented, as well as van der Waals interactions in carbon materials and strategies to overcome these interactions, such as increasing electrostatic repulsion between dispersed particles, surface functionalization, or adsorption of passivation agents such as macromolecules, which are the basis of many dispersion and exfoliation procedures. The demonstration of how knowledge and fine control of colloidal interactions have been used to overcome several limitations, such as the preparation of stable and concentrated dispersions of carbon materials and keeping appreciable electrical conductivity, is presented. It is also showed that the same knowledge can help the development of more environmentally friendly carbon-based colloids as well as the improvement of similar systems as dispersions of two-dimensional materials.     

Polyelectrolyte adsorption and stabilization of silica-suspensions

The adsorption of cationic polyelectrolytes on colloidal silica-particles is investigated. The polyelectrolytes poly(diallyl-dimethyl-ammoniumchloride) PDADMAC of different molar mass have been used. The adsorbed amount is influenced by the ionic strength and pH of the suspension and the molar mass of the macromolecule. The adsorption determines the zetapotential of the covered particles. The electrostatic interaction between the particles as well as the structure of the adsorbed polyelectrolytes play an important role in the stabilization and flocculation behaviour of the polyelectrolyte covered suspensions.     

From colloidal stability in ionic liquids to advanced soft materials using unique media

Owing to their fascinating properties, ionic liquids (ILs) are now receiving a great deal of attention as alternatives to organic solvents and electrolyte solutions and as synthetic and dispersion media for colloidal systems. Colloidal stability is an essential factor in determining the properties and performance of colloidal systems combined with ILs. The remarkable properties of ILs primarily originate from their highly ionic nature. Although such high ionic strength often causes colloidal aggregation in aqueous and organic suspensions, some colloidal particles can be well suspended in ILs without any stabilizers. In the first part of this article, we focus on recent experiments conducted to investigate the colloidal stability of bare and polymer-grafted silica nanoparticles and on the surface force between silica substrates and ILs. Three different repulsions between colloidal particles (i.e., electrostatic, steric, and solvation forces) are also highlighted, after which a possible interpretation of the results in terms of the stabilization mechanism in ILs both in the presence and in the absence of stabilizers is proposed. The latter part of this article provides an overview of our recent studies on colloidal soft materials with ILs. On the basis of the dispersed states of the silica colloids in ILs, two different soft materials, a colloidal gel and a colloidal glass in ILs, were fabricated. The relationship between their functional properties, such as ionic transport, rheological properties, and optical properties, and the microstructure of the colloidal materials is also described.     

Functional Poly(ionic liquid) Porous Membranes: From Fabrications to Advanced Applications†

Polyelectrolyte porous membranes (PPMs) belong to the most interesting classes of materials, because the synergy of tunable pore sizes and charge nature of polyelectrolyte endow them with wide-ranging practical applications. However, owing to the water solubility and ionic nature of the polyelectrolytes, traditional polyelectrolytes are difficult to use in scalable preparation of high-quality PPMs through the well-developed industrial methods. Poly(ionic liquid)s (PIL) are a subclass of functional polyelectrolytes bearing ionic liquid groups in their repeating unites, inheriting the advantages of ionic liquids (ILs) and macromolecular architecture features. In recent years, along with rapid development of PIL materials chemistry, considerable and significant developments involving the novel preparation methods, and structure-property-function relationships of PPMs have been made. In this review, we highlight the latest discovery and proceedings of PPMs, particularly the advancements in how to tailor structures and properties of PPMs by rational structure design of PILs. The formation mechanisms of various PPMs were also discussed in detail from the viewpoint of PILs molecular structures. A future perspective of the challenges and promising potential of PPMs is cast on the basis of these achievements. We expect that these analyses and deductions will be useful for the design of useful PPMs and serve as a source of inspiration for the design of future multifunctional PPMs.      

Enzymatically active colloidal crystal arrays

We report the construction of three-dimensional (3D) colloidal crystal arrays (CCA) and hollow colloidal crystal arrays (HCCA) derived from the self-assembly of polyelectrolytes (PE)-coated polystyrene (PS) particles and their use as models of high surface area systems to immobilize peroxidase (POD). POD molecules could infiltrate into the deep layers of CCA and HCCA through their interconnected pores and strongly adsorbed at the PE shell of the colloidal particles. And the total enzyme loading amount and bioactivities increased linearly with the thickness of the CCA till ca. 10 mum. Compared with flat substrates with the same geometrical area, CCA and HCCA exhibit much higher enzyme loading abilities (approximately 43 and 53 times respectively) and the resulting bioactivities (approximately 35 and 41 times respectively) due to their inherently higher surface area and 3D interconnected porous structures. In addition, HCCA could load approximately 30% more POD than CCA because some POD molecules could infiltrate into the interior of the hollow capsule under salt condition.     

Recent advances in fabrication of monolayer colloidal crystals and their inverse replicas

Monolayer colloidal crystals(MCCs)are two-dimensional(2D)colloidal crystals consisting of a monolayer of monodisperse colloidal particles arrayed with a 2D periodic order.In recent years,MCCs have attracted intensive interest because they can act as 2D photonic crystals and be used as versatile templates for fabrication of various 2D nanostructure arrays.In this review,we provide an overview of the recent progress in the controllable fabrication of MCCs and their inverse replicas.First,some newly-developed methods for the self-assembly of MCCs based on different strategies including interfacial assembly and convective assembly are introduced.Second,some representative novel methods regarding the fabrication of various functional2D inverse replicas of MCCs,such as 2D arrays of nanobowls,nanocaps,and hollow spheres,as well as 2D monolayer inverse opals(MIOs),are described.In addition,the potential applications of MCCs and their inverse replicas are discussed.     

侧链偶氮聚电解质在胶体微球表面的静电层层自组装和微胶囊制作

将侧链偶氮聚电解质应用于聚苯乙烯胶体微球表面的静电层层自组装,得到了偶氮聚电解质和聚二烯丙基二甲基氯化铵多层膜覆盖的核壳微球.实验表明,组装后偶氮苯基团发生了一定程度的解聚集,得到的胶体微球可表现出明显的光色效应.研究进一步采用含肉桂酸酯的光敏聚电解质作为交联的保护壳层,并通过光交联反应使表面层发生交联固化反应.将上述具有核壳结构的胶体球溶解去除聚苯乙烯内核后,得到了含光响应聚电解质的空心微胶囊.     

Colloidal stability of magnetic iron oxide nanoparticles: influence of natural organic matter and synthetic polyelectrolytes

The colloidal behavior of natural organic matter (NOM) and synthetic poly(acrylic acid) (PAA)-coated ferrimagnetic (γFe(2)O(3)) nanoparticles (NPs) was investigated. Humic acid (HA), an important component of NOM, was extracted from a peat soil. Two different molecular weight PAAs were also used for coating. The colloidal stability of the coated magnetic NPs was evaluated as a resultant of the attractive magnetic dipolar and van der Waals forces and the repulsive electrostatic and steric-electrosteric interactions. The conformational alterations of the polyelectrolytes adsorbed on magnetic γFe(2)O(3) NPs and their role in colloidal stability were determined. Pure γFe(2)O(3) NPs were extremely unstable because of aggregation in aqueous solution, but a significant stability enhancement was observed after coating with polyelectrolytes. The steric stabilization factor induced by the polyelectrolyte coating strongly dictated the colloidal stability. The pH-induced conformational change of the adsorbed, weakly charged polyelectrolytes had a significant effect on the colloidal stability. Atomic force microscopy (AFM) revealed the stretched conformation of the HA molecular chains adsorbed on the γFe(2)O(3) NP surface at pH 9, which enhanced the colloidal stability through long-range electrosteric stabilization. The depletion of the polyelectrolyte during the dilution of the NP suspension decreased the colloidal stability under acidic solution conditions. The conformation of the polyelectrolytes adsorbed on the NP surface was altered as a function of the substrate surface charge as viewed from AFM imaging. The polyelectrolyte coating also led to a reduction in magnetic moments and decreased the coercivity of the coated γFe(2)O(3) NPs. Thus, the enhanced stabilization of the coated maghematite NPs may facilitate their delivery in the groundwater for the effective removal of contaminants.     

Mechanism of TiO2 pigment retention on pulp fiber with polyelectrolytes

Pulp fibers and pigment dispersed in water are both negatively charged and, therefore, when a paper sheet is formed on a screen the pigment particles, which are of colloidal dimension, are not retained. Cationic polyelectrolytes are employed to promote pigment retention but the mechanism by which they operate is not well understood.Two cationic polyelectrolytes, based on polyethylenimine and polyacrylamide and used commercially as retention aids were examined to clarify their role in TiO₂ retention. From the comparison of polymer adsorption on both fiber and pigment, their electrophoretic mobility, and the extent of pigment retention it was concluded that the main mechanism is mutual attraction between oppositely charged fiber and pigment. In general, the fibers became positive at a polymer concentration where the pigment was still negative and maximum retention was realized when these negative pigment particles deposited on the already positive fibers. Homoflocculation of the pigment (and mechanical entrapment of pigment flocs in the forming sheet) also contributed to the overall retention and was more pronounced with the polyacrylamide polymer.     

Functionalized multiwall carbon nanotube/gold nanoparticle composites

Multiwall carbon nanotubes (MWCNTs) were chemically oxidized in a mixture of sulfuric acid and nitric acid (3:1) while being ultrasonicated. The effect of oxidative ultrasonication at room temperature on development of functional groups on the carbon nanotubes was investigated. The dispersability and the carboxylic acid group concentration of functionalized MWCNTs (fMWNTs) varied with reaction time. The concentration of carboxylic acid groups on fMWNTs increased from 4 x 10(-4) mol/g of fMWNTs to 1.1 x 10(-3) mol/g by doubling the treatment period from 4 to 8 h. The colloidal stability of aqueous fMWCNTs dispersions was enhanced through elongated oxidation. fMWCNTs that were reacted longer than 4 h did not precipitate in aqueous media for at least 24 h. The layer-by-layer self-assembly of polyelectrolytes on fMWCNTs was characterized by zeta potential measurements. The zeta potential of fMWCNTs changed from negative charge to positive charge when cationic polyelectrolytes were self-assembled on their surface. With addition of anionic polyelectrolytes, cationic polyelectrolyte coated fMWCNTs showed the expected charge reversal as expected for multilayer self-assembly. Complex formation of positively charged gold nanoparticles and negatively charged fMWCNTs was achieved with and without polyelectrolyte coatings by electrostatic interaction. The complex formation was characterized by high-resolution transmission electron microscopy and energy-dispersive X-ray spectroscopy. The here found complex formation of positively charged colloidal gold and defect sites on fMWNTs indicates the location of functional groups on carbon nanotubes. It is suggested that positively charged colloids such as gold nanoparticles could be used for detection of defect sites on carbon nanotubes.     

Layer-by-Layer Construction of Novel Biofunctional Fluorescent Microparticles for Immunoassay Applications

A novel class of biofunctional fluorescent microparticles for application in immunoassays was constructed by using the layer-by-layer self-assembly method to deposit multiple layers of fluorescently labeled polyelectrolytes onto colloidal particles, followed by deposition of a protein (immunoglobulin G, IgG) layer. Microelectrophoresis experiments revealed alternating negative and positive zeta-potentials with deposition of each successive polyelectrolyte layer, indicating that the alternate electrostatic adsorption of polyelectrolytes of opposite charge was successfully achieved. Transmission electron microscopy images showed a change of the particle surface texture after polyelectrolyte multilayer deposition. Fluorescence microscopy image (FMI) analysis provided direct measurement of the fluorescence intensity of single microparticles. The observed systematic increase of the fluorescence intensity of individual microparticles with increasing polyelectrolyte layer number from FMI analysis further demonstrated the controlled regular adsorption of polyelectrolyte layers onto the polystyrene (PS) particles. Protein immobilization onto the polyelectrolyte multilayer-coated particles was verified by the different surface properties of the microparticles with respect to surface charge under pH conditions above and below the isoelectric point of the proteins. The assembly of IgG and fluorescein isothiocyanate-labeled IgG onto polyelectrolyte multilayer-coated PS microparticles and their potential use was ultimately confirmed by a solid phase immunotest. Copyright 2001 Academic Press.     

Electrophoretic Mobility of Soft Particles in Concentrated Suspensions

A general theory is developed for the electrophoretic mobility of spherical soft particles (i.e., spherical hard colloidal particles of radius a coated with a layer of polyelectrolytes of thickness d) in concentrated suspensions in an electrolyte solution as a function of the particle volume fraction φ on the basis of Kuwabara's cell model. In the limit d-->0, the mobility expression obtained tends to that for spherical hard particles in concentrated suspensions, whereas in the limit a-->0, it becomes that for spherical polyelectrolytes (charged porous spheres with no particle core). Simple approximate analytic mobility expressions are derived for the case where relaxation effect is negligible. It is found that in practical cases, the φ dependence of the mobility is negligible for da, the mobility strongly decreases with increasing φ. Copyright 2000 Academic Press.     

Polymeric ionic liquids: a strategy for preparation of novel polymeric materials

A novel polymeric ionic liquid (PIL), bearing high C-N and N-N content, potentially suitable for new safe energetic materials and catalyst supports was introduced. The PIL was prepared by way of radical co-polymerisation of 1-vinyl-3-p-nitrobenzylimidazolium bromide and 1-vinylimidazole at 80°C using azobisisobutyronitrile (AIBN) as an initiator. The PIL thus produced was successfully transformed into NO₃@PIL and N₃@PIL for potential application as safe energetic materials and/or catalyst supports. The polymers were obtained in quantitative yields and were characterised by NMR, FTIR, DSC and TGA data. This study reveals the adequate thermal stability of novel salt-based nitrogen-rich polymeric ionic liquids for application as safe energetic materials and/or supports in heterogeneous catalysis.     

Electrosteric Stabilization of Al(2)O(3), ZrO(2), and 3Y-ZrO(2) Suspensions: Effect of Dissociation and Type of Polyelectrolyte

The mechanisms of eight anionic polyelectrolytes stabilizing colloidal sized alpha-Al(2)O(3), pure ZrO(2), and Y(2)O(3)-doped ZrO(2) particles in aqueous solution are discussed. The polyelectrolytes studied were the Na(+) and NH(4)(+) salts of polyacrylic acid and polymethacrylic acid having different molecular weights. The particle-dispersant interactions were studied by measuring adsorption isotherms, particle size, thickness of adsorbed layer, and zeta potentials by elektrokinetic sonic analysis at different powder volume fractions (straight phi=0.01-0.3), pH, and electrolyte (KCl) content. The dissociation of the polyelectrolytes was studied by potentiometric titrations. The dissociation constant of the polymethacrylates was found to be 0.6 pH unit higher than that for the polyacrylates. High-affinity adsorption isotherms were observed over the pH range when the polyelectrolytes were fully ionized. The results show good correlation between adsorption isotherms and zeta potential data in systems of dispersed, dilute alumina particles. When particles and polymers were of equal charge (the same sign of charge) the polymer shell was thicker. At higher volume fractions (straight phi=0.3), and when alumina particles/added ammonium polyelectrolyte were of equal charge, a maximum in the absolute value of zeta potential resulted. Due to adsorption all the anionic polyelectrolytes studied provided electrosteric stabilization of the alpha-Al(2)O(3), and Y(2)O(3)-doped ZrO(2) suspensions by enhancing the zeta potential to 40 mV or over and by shifting the isoelectric point to lower pH, the low-molecular-weight polyelectrolytes decreasing the isoelectric point more than the polyelectrolytes having higher molecular weight. The polyelectrolytes studied failed to stabilize pure monoclinic ZrO(2) particles. Due to the shortness of the chain of polyelectrolytes studied, no bridging was observed between oppositely charged polyelectrolyte/alumina particles. Copyright 2000 Academic Press.     

Effect of mixing on the formation of complexes of hyperbranched cationic polyelectrolytes and anionic surfactants

The effect of different mixing protocols on the charged nature and size distribution of the aqueous complexes of hyperbranched poly(ethylene imine) (PEI) and sodium dodecyl sulfate (SDS) was investigated by electrophoretic mobility and dynamic light scattering measurements at different pH values, polyelectrolyte concentrations, and ionic strengths. It was found that at large excess of the surfactant a colloidal dispersion of individual PEI/SDS nanoparticles forms via an extremely rapid mixing of the components by means of a stop-flow apparatus. However, the application of a less efficient mixing method under the same experimental conditions might result in large clusters of the individual PEI/SDS particles as well as in a more extended precipitation regime compared with the results of stop-flow mixing protocol. The study revealed that the larger the charge density and concentration of the PEI, the more pronounced the effect of mixing becomes. It can be concluded that an efficient way to avoid precipitation in the solutions of oppositely charged polyelectrolytes and surfactants might be provided by extending the range of kinetically stable colloidal dispersion of polyelectrolyte/surfactant nanoparticles via the application of appropriate mixing protocols.     

A Method of Manufacturing Highly Conductive Composite Materials by Coating Surfaces of Nonconductors with Fine Particulate Conductive Substances

 A widely applicable aqueous dip-coating process termed substrate induced coagulation (SIC) suitable for coating various types of substrates (e.g. polar and unpolar polymers, inorganic glasses, metals) with fine particulate materials (e.g. carbon blacks, small particle size SiO₂ or TiO₂) has been developed. This process is based on the interaction of a conditioner (water soluble polymers or polyelectrolytes, e.g. proteins, polyvinylalcohols, polyacrylates with low charge density) which is adsorbed on the substrate with a surfactant-stabilized dispersion containing some additional electrolyte. Employing dispersions of conductive particles, the resulting coatings can be used as a conductive starting layer for electroplating. Such layers are fairly rinse-proof and may be applied in the metallization process of through holes in printed wiring boards or for the production of highly conductive composite materials from coated particles. SIC has also been used to improve the distribution of carbon in composite battery electrodes such as MnO₂/C.     

Generation of functionalized and robust semiconducting polymer dots with polyelectrolytes

We describe a facile method to functionalize semiconducting polymer dots (Pdots) with polyelectrolytes. The polyelectrolyte coating dramatically improves the colloidal stability of the Pdots in solutions which are either of high ionic strength or contain bivalent metal ions: this feature allows Pdots to be used under physiologically relevant environments without losing their functionality. We conjugated the polyelectrolyte-coated Pdots with streptavidin to demonstrate their application in specific cell labeling.     

Layer-by-layer nanoassembly of polyelectrolytes using formamide as the working medium

Formamide, in its pure state, has been used as a working solvent for layer-by-layer (LbL) polyelectrolyte self-assembly. Polystyrene sulfonate (PSS) and polyallylamine hydrochloride (PAH) polyelectrolyte films were deposited onto planar substrates and colloidal particles. Film deposition was confirmed using quartz crystal microbalance and zeta potential measurements. Formamide was used as an alternative to the water-based working solvents commonly used for LbL self-assembly. Few LbL self-assembly studies using nonaqueous solvents have been reported. Most studies performed with nonaqueous solvents have required the addition of small volumes of water to dissolve the polyelectrolytes. Conversely, the high dielectric constant of pure formamide led to the dissolution and transport of PSS and PAH. Using formamide, it is possible to deposit nanometer thick polyelectrolyte films onto water-sensitive surfaces. Formamide can be thus be used for encapsulating water sensitive hydrogen storage materials within polyelectrolyte films.     

Pickering emulsions: Versatility of colloidal particles and recent applications

The versatility of colloidal particles endows the particle stabilized or Pickering emulsions with unique features and can potentially enable the fabrication of a wide variety of derived materials. We review the evolution and breakthroughs in the research on the use of colloidal particles for the stabilization of Pickering emulsions in recent years for the particle categories of inorganic particles, polymer-based particles, and food-grade particles. Moreover, based on the latest works, several emulsions stabilized by the featured particles and their derived functional materials, including enzyme immobilized emulsifiers for interfacial catalysis, 2D colloidal materials stabilized emulsions as templates for porous materials, and Pickering emulsions as adjuvant formulations, are also summarized. Finally, we point out the gaps in the current research on the applications of Pickering emulsions and suggest future directions for the design of particulate stabilizers and preparation methods for Pickering emulsions and their derived materials.