Surface Characterization of NH4PAA-Stabilized Zirconia Suspensions

Ammonium polyacrylate (NH4PAA) stabilized yttria-doped (3 mol%) tetragonal zirconia (Y-TZP) aqueous suspensions were prepared. Surface chemistry of the suspension was investigated by a variety of techniques. Isotherm adsorption of dispersants on ZrO2 particles demonstrated an optimum coverage of 0.25 mg/g at pH 10. The isoelectric point (IEP) of ZrO2 suspensions was shifted to low pH regions with the presence of NH4PAA. Scanning auger microscopy (SAM) and FTIR and UV spectrophotometry were employed to determine the surface properties of ZrO2 suspensions, which confirmed that the surface Zr-O bonds were affected by the adsorbed polymers. Atomic force microscopy (AFM) analysis indicated that the interactions between particles were evidently influenced by polymer dispersants. Copyright 1999 Academic Press.     

Synthesis of polytetrafluoroethylene/polyacrylate core-shell nanoparticles via emulsifier-free seeded emulsion polymerization

Polytetrafluoroethylene (PTFE)/polyacrylate core-shell nanoparticles were produced via the emulsifier-free seeded emulsion polymerization of acrylate monomers with PTFE latex as seed. The monomer conversions under different synthesis parameters were monitored by a gravimetric method. The polymerization conditions for preparing PTFE/polyacrylate core-shell nanoparticles were surveyed and optimized. The chemical component of the PTFE/polyacrylate particles was confirmed by comparing the Fourier-transform infrared spectra of PTFE and PTFE/polyacrylate particles. The core-shell structure of the resulting PTFE/polyacrylate nanocomposite particles was investigated by transmission electron microscopy. The water contact angles of the films prepared from PTFE/polyacrylate nanocomposite particles showed that the films were hydrophilic, which confirmed that polyacrylate covered the surface of the PTFE particles. This kind of PTFE/polyacrylate core-shell nanoparticles might advance the compatibility of PTFE with other materials due to the covering of the polyacrylate shell on the surface of PTFE, which would make them promising in various fields.     

Polyacrylate/silica nanocomposite materials prepared by sol-gel process

Polyacrylate/silica nanocomposite was prepared by sol-gel process via in situ emulsion polymerization. The influence of the synthetic conditions, such as the ratio of different monomers and the contents of tetraethoxysilane (TEOS), γ-methacryloxypropyltrimethoxysilane (Z-6030), diethanolamine (DAM) and ammonium persulfate (APS) on the physical mechanical properties of polyacrylate/silica nanocomposite was investigated in details. Dynamics Laser Scattering (DLS) indicated that the average diameter of the polyacrylate/silica latex particles (177 nm) was bigger than that of the pure polyacrylate latex particles (105.3 nm), but the ζ potential of polyacrylate/silica was decreased respectively in contrast to that of the polyacrylate. Differential Scanning Calorimeters (DSC) analysis confirmed that the glass transition temperature of polyacrylate/nano-SiO₂ (T_g = −24 °C) was higher than that of polyacrylate (T_g = −36 °C). UV analysis showed that the UV absorbency of polyacrylate/silica was improved evidently in contrast to that of polyacrylate.     

氟含量对含氟丙烯酸酯共混乳胶膜梯度结构和表面性能的影响

首先将制备出的平均粒径较小的含氟丙烯酸酯均聚物乳液与平均粒径较大的纯丙烯酸酯共聚物乳液按不同的比例( 1/9,2/8,3/7,4/6,5/5)共混,接着将各共混乳液在室温下(20℃)玻璃基材上干燥后,于110℃/210℃下热处理一段时间.运用接触角法,XPS、AFM、SEM-EDX等详细研究了共混乳胶膜中含氟组分含量对...     

聚丙烯酸钠在Al2O3/水界面吸附行为的ESR研究

采用电子自旋共振技术结合自旋标记方法研究了聚丙烯酸钠在Al2O3／水界面吸附的分子构型和运动行为。结果表明，哌啶氮氧自由基在聚丙烯酸钠分子上是链间标记，它的运动受到聚合物长链的束缚；聚丙烯酸钠在Al2O3上的吸附等温线呈Langmuir型，随表面吸附量的增加，吸附在Al2O3上的聚丙烯酸钠分子的固着链节分数减小，从平衡浓度0.25mg/ml时的0．90变化到饱和吸附时的0．65。聚丙烯酸负离子通过静电引力多点吸附在Al2O3表面，分子中的大部分链节平躺在Al2O3表面，少部分链节伸向溶液。     

Preparation and characterization of polytetrafluoroethylene‐polyacrylate core–shell nanoparticles

Polytetrafluoroethylene (PTFE)‐polyacrylate core–shell nanoparticles were produced by using PTFE micropowder and acrylate via seeded emulsion polymerization in the presence of fluorosurfactant. The properties of emulsion under various polymerization conditions were investigated and optimized. The chemical composition of the PTFE‐polyacrylate nanoparticles was characterized by Fourier‐transform infrared spectrometry (FTIR). The particle size and core–shell structure of the resulting PTFE‐polyacrylate nanoparticles were confirmed by transmission electron microscopy (TEM). Wettability of the PTFE‐polyacrylate core–shell particles was higher than the pristine PTFE. The formation of this kind of PTFE‐polyacrylate core–shell nanoparticles could improve the compatibility of PTFE with other materials because PTFE is covered by polyacrylate shell, which make them promising in various fields. Copyright © 2007 John Wiley & Sons, Ltd.     

天然生漆/丙烯酸树脂IPN涂料的制备与性能

研究了直接由天然生漆(raw lacquer,RL)和多羟基丙烯酸树脂(multihydroxyl polyacrylate resin,MPAR)制备IPN(interpenetrating polymer network)涂料的方法,以及生漆的预聚合对涂料成膜的作用,并对共混物涂膜的物理机械性能、抗溶剂性能、抗紫外线性能等进行了测试表征。结果表明,天然生漆/丙烯酸树脂互穿网络共混能使RL与MPAR相互交联、缠结,其涂膜兼具有天然生漆和丙烯酸树脂的优良性能。     

Structural investigation of hydrate compounds of the tetraisoamylammonium form of polyacrylate ion exchange resins. Crystal structure of a clathrate hydrate of linear tetraisoamylammonium polyacrylate

A polyhydrate of the tetraisoamylammonium salt of linear (uncrosslinked) polyacrylate (～25 monomeric units in the polyacrylate chain) is described and compared to polyhydrates of cross-linked tetraisoamylammonium polyacrylates (0.5–3% of cross-linking with divinylbenzene or divinylsulfide). Powder X-ray diffraction reveals that the polyhydrate containing a linear polyacrylate molecule has the same structure (hexagonal, a = 12.26 Å, c = 12.71 Å at 3°C) as polyhydrates of the cross-linked polyacrylate molecules. A single crystal of the polyhydrate obtained from an aqueous solution of linear tetraisoamylammonium polyacrylate is studied by X-ray diffraction at ?173°C. The structure is hexagonal; space group P-6m2; the polyhydrate framework is a slightly distorted variant of the hexagonal structure-I of clathrate hydrates.     

Synthesis and Characterization of Nano-silica/Polyacrylate Composite Emulsions by Sol-gel Method and in-situ Emulsion Polymerization

Organic nano-silica was firstly synthesized by sol-gel method with methyl methacrylate (MMA) and butyl acrylate (BA) in the micelles as dispersing media, tetraethoxysilicate (TEOS) as precursor, hydrochloric acid as catalyst and methacryloylpropyl trimethoxysilane (A174) as modifier. Subsequently, the nano-silica/polyacrylate composite emulsions were directly prepared by in-situ emulsion polymerization under the action of the initiator. The structure and properties were characterized by Fourier transform infrared spectroscopy (FTIR), dynamic light-scattering (DSL), thermogracvimetry (TG) and transmission electron microscopy (TEM). The results showed that A174-modified nano-silica was successfully synthesized in the acrylate-based emulsions by the sol-gel method. The nano-silica was encapsulated by polyacrylate, and the composite latex particles exhibited an apparent core-shell structure. The A174 could improve the lipophilicity of nano-silica and increase the grafting efficiency of polyacrylate on nano-silica particles. The nano-silica/polyacrylate composite latex film had better thermal stability, and the composite latex particles had greater average size and broader size distribution in contrast to those of pure polyacrylate emulsions.     

Molecular dynamics simulation of water diffusion inside an amorphous polyacrylate latex film

Molecular dynamics simulations were applied to investigate the diffusion behaviors of water molecules at temperatures ranging from 323 to 443 K inside amorphous polyacrylate. The results showed that the simulated diffusion coefficients and activation energies were similar to those of experiments. Moreover, the activation energy of water molecules at high temperatures was higher than that at low temperatures by 3.16 kcal mol^?1, which was close to the hydrogen‐bonding energy between water and polyacrylate. An analysis of the experimental desorption curves of water molecules and their activation energies has confirmed that there are two forms of water molecules inside rubbery polyacrylate, namely, free water and bound water. In addition, it has been concluded that bound water molecules move from one polar group of polyacrylate to another, and this is followed by occasional jumps. Simulated information is very helpful in designing new polyacrylate latex systems and optimizing existent polyacrylate systems. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 884–891, 2007     

Expanding the Chemistry of the Class C Radical SAM Methyltransferase NosN by Using an Allyl Analogue of SAM

The radical S‐adenosylmethionine (SAM) superfamily enzymes cleave SAM reductively to generate a highly reactive 5′‐deoxyadenosyl (dAdo) radical, which initiates remarkably diverse reactions. Unlike most radical SAM enzymes, the class C radical SAM methyltransferase NosN binds two SAMs in the active site, using one SAM to produce a dAdo radical and the second as a methyl donor. Here, we report a mechanistic investigation of NosN in which an allyl analogue of SAM (allyl‐SAM) was used. We show that NosN cleaves allyl‐SAM efficiently and the resulting dAdo radical can be captured by the olefin moieties of allyl‐SAM or 5′‐allylthioadenosine (ATA), the latter being a derivative of allyl‐SAM. Remarkably, we found that NosN produced two distinct sets of products in the presence and absence of the methyl acceptor substrate, thus suggesting substrate‐triggered production of ATA from allyl‐SAM. We also show that NosN produces S‐adenosylhomocysteine from 5′‐thioadenosine and homoserine lactone. These results support the idea that 5′‐methylthioadenosine is the direct methyl donor in NosN reactions, and demonstrate great potential to modulate radical SAM enzymes for novel catalytic activities.     

A novel staining technique for studying toughening mechanisms in saturated acrylic rubber-modified polymers

A novel technique which utilizes a two-stage staining approach, (i.e., styrene absorption followed by osmium tetraoxide staining) is introduced for staining saturated polyacrylate rubbers. This novel staining approach, which stains and hardens polyacrylate rubber, is found to be useful for room temperature microtomy of polyacrylate rubber-modified polymers. Therefore, both the morphology and the crack tip toughening mechanisms of polyacrylate rubber-modified systems can be studied. Details concerning staining time, staining media, and use of solvents are discussed.     

Spontaneous Emergence of S‐Adenosylmethionine and the Evolution of Methylation

S ‐Adenosylmethionine (SAM) is an essential methylation cofactor. The origins of SAM methylation are complex, seemingly demanding the simultaneous emergence of an enzyme that makes SAM and enzyme(s) that utilize it. We report that both ATP and adenosine spontaneously react with methionine to yield SAM, thus suggesting that SAM could have emerged by chance. SAM methylation thus exemplifies how metabolites and pathways can co‐emerge through the gradual recruitment of individual enzymes in reverse order.     

硫辛酸在金电极上自组装成膜动力学研究

自组装单层膜 (ＳＡＭ)应用广泛[1～ 3] 。但对于硫辛酸 (ＴＡ)自组装成膜动力学过程的研究尚未见报道。本研究利用石英晶体微天平 (ＱＣＭ)对ＴＡ自组装成膜过程进行在线监测 ,研究成膜动力学特征 ,并探讨浓度、温度对成膜过程的影响 ,以及在不同ｐＨ值下 ,ＳＡＭ的稳定性 ,推算了不同温度下的速率常数及成膜的活化能。1　实验部分1 1　基本原理通过监测成膜过程中石英晶体微天平 (ＱＣＭ)的振荡频率的变化 ,据Ｓａｕｅｒｂｒｅｙ方程 ,可推知在石英谐振器 (ＱＣＭ)的金电极表面 ,ＴＡ的吸附质量Γ(Γ =Δｍ Ａ ,ｇ ｃｍ2 )与ＱＣＭ的频率…     

偶氮苯衍生物-β-环糊精包合物的自组装行为

研究了4-N（2’-巯基-乙基）羧基酰胺偶氮苯（Azo）与β-环糊精（β-CD）形成的包合物在金表面上的自组装行为．X射线光电子能谱（XPS）结果证实,Azo和Azo与β-CD形成的包合物均可在金表面上自组装形成单分子层膜．在包合物形成的自组装膜中,Azo与β-CD的摩尔比约为1：1．Azo自组装膜的电化学反应表现速率常数（Kobs）随组装时间的延长而明显减小,反映出自组装膜的排列随时间延长而趋于更加致密,从而抑制了偶氮苯基团的电化学诱导构型转化,降低了其电活性．而Azo与β-CD包合物自组装膜的Kobs值随组装时间变化不大,在组装76h以后,包合物自组装膜的Kobs比单纯偶氮苯自组装膜的Kobs高2个数量级以上．表明环糊精能够将偶氮苯分子隔开,从而抑制了偶氮苯在自组装膜中的聚集作用,有效地提高其电化学活性．     

The Influence of Molecular Dipole Moment on the Redox-Induced Reorganization of α-Helical Peptide Self-Assembled Monolayers: An Electrochemical SPR Investigation

Self-assembled monolayers (SAMs) of ferrocene-labeled α-helical peptides were prepared on gold surfaces and studied using electrochemical surface plasmon resonance (EC-SPR). The leucine-rich peptides were synthesized with a cysteine sulfhydryl group either at the C- or N-terminus, enabling their immobilization onto gold surfaces with control of the direction of the molecular dipole moment. Two electroactive SAMs were studied, one in which all of the peptide dipole moments are oriented in the same direction (SAM1), and the other in which the peptide dipole moment of one peptide is aligned in the opposite direction to that of its surrounding peptide molecules (SAM2). Cyclic voltammetry combined with SPR measurements revealed that SAM reorientations concomitant with the oxidation of the ferrocene label were more significant in SAM2 than in SAM1. The substantially greater change in the peptide film thickness in the case of SAM2 is attributed to the electrostatic repulsion between the electrogenerated ferrocinium moiety and the positively charged gold surface. The greater permeability of SAM1 to electrolyte anions, on the other hand, appears to effectively neutralize this electrostatic repulsion. The film thickness change in SAM2 was estimated to be 0.25 ± 0.05 nm using numerical simulation. The timescale of the redox-induced SPR changes was established by chronoamperometry and time-resolved SPR measurements, followed by fitting of the SPR response to a stretched exponential function. The time constants measured for the anodic process were 16 and 6 ms for SAM1 and SAM2 respectively, indicating that the SAM thickness changes are notably fast.     

An assessment of indomethacin-induced mucosal damage in vivo by measuring the metabolism of salicylamide in rabbit intestine.

Indomethacin-induced mucosal damage was assessed in vivo by measuring salicylamide (SAM) metabolism in rabbit intestine. Intestinal mucosal damage 48 h after oral indomethacin (500 mg/kg) administration was examined using a scanning electron microscope. Duodenal, jejunal and ileal mucosal toxicity was compared with that in controls. Intestinal first-pass metabolism of SAM was studied using in situ intestinal sacs with intact mesenteric venous blood collection. The appearance of both SAM and its metabolites in the mesenteric venous blood was measured following cannulation of the mesenteric vein of the exposed intestine and collecting all venous blood draining from the absorbing region. Following oral pretreatment with indomethacin, the appearance of SAM and SAM glucuronide (SAMG) in the mesenteric venous blood was significantly increased. The concentrations of SAM and SAMG in the blood increased following intraduodenal administration of SAM in vivo in rabbits orally pretreated with indomethacin compared with controls. However, after intravenous administration of SAM, the blood concentration of SAM and SAMG was not increased compared with controls. These findings suggest that the differences in intestinal first-pass metabolism of SAM may be due to the intestinal mucosal damage induced by oral indomethacin pretreatment. The results indicate that the alteration of intestinal first-pass metabolism of a marker compound may be utilized to assess intestinal mucosal damage in vivo.     

Stabilization of Nanostructured Zeolite Particles: The Effect of Sodium Polyacrylate on the Disaggregation Kinetics and Threshold

The influence of sodium polyacrylate on the disaggregation kinetics and threshold of conglomerates of a natural agromineral, zeolite, under ultrasonic dispersion has been studied. It has been demonstrated that the use of sodium polyacrylate as a stabilizing additive has resulted in the reduction of the zeolite particle size, the increase in the content of isolated fractions, and significant decrease in the ultrasonic treatment duration. When the zeolite was dispersed with sodium polyacrylate, the particles achieved an average size of 750.0 nm after the first minute of cavitation treatment, while the dispersion of the agromineral without the additive required a 5-min treatment to achieve the same result. The use of sodium polyacrylate increased the stabilized state period of zeolite particles to half a year.     

Temperature-induced collapse of alkaline Earth cation-polyacrylate anion complexes

Polyacrylate anions are used to inhibit CaCO3 precipitation and may be a promising additive to control formation of inorganic nanoparticles. The origin of this applicability lies in specific interactions between the alkaline earth cations and the carboxylate functions along the polyacrylate chains. In the absence of CO32- anions, these interactions eventually cause precipitation of polyelectrolytes. Extended investigation of dilute sodium polyacrylate solutions approaching this precipitation threshold revealed a dramatic shrinking of the PA coil dimensions once the threshold is reached (Eur. Phys. J. E 2001, 5, 117). Recent isothermal calorimetric titration experiments by Antonietti et al. (Macromolecules 2004, 37, 3444) indicated that the driving force of this precipitation is entropic in nature. In the present work, we investigated the impact of temperature on the structural changes of dissolved polyacrylate chains decorated with alkaline earth cations. To this end, large polyacrylate chains were brought close to the precipitation threshold by the addition of distinct amounts of Ca2+ or Sr2+ cations. The resulting structural intermediates were then subjected to temperature variations in the range of 15 degrees C 相似文献   

Electrostatic attachment of gold and poly(lactic acid) nanoparticles onto omega-aminoalkanoic acid self-assembled monolayers on 316L stainless steel

The assembly of poly(lactic acid) (PLA) nanoparticles on a 12-aminodecanoic acid (ADA) self-assembled monolayer (SAM) is described. Assembly is accomplished through electrostatic interactions between the positively charged SAM and the negatively charged PLA nanoparticles. The strategy used involves two steps in which a preliminary electrochemical coating of the ADA SAM is followed by a second step that involves immersing the SAM in a solution containing gold or PLA nanoparticles. The SAM was characterized by using cyclic voltammetry (CV), X-ray photoelectron spectroscopy (XPS), FTIR spectroscopy, and contact angle measurements, whereas scanning electron microscopy (SEM) was used to image the nanoparticles after electrostatic attachment was achieved. We found that the surface coverage of the nanoparticles could be controlled by modulating the electrostatic interactions between the negatively charged particles and the positively charged SAM surface by varying the pH of the nanoparticle solution, the immersion time, and the number of cyclic voltammetry scans under which the SAM was formed.