Synthesis,solid‐state,and charge‐transport properties of conjugated polythiophene‐S,S‐dioxides

An alkylated semiconducting polymer comprising alternating bithiophene‐[all]‐S,S‐dioxide and aromatic monothiophene units in the polymer backbone was synthesized with the intent of modifying the energy gap and lowest unoccupied molecular orbital for use as a stable n‐type semiconductor. Films spun from this semiconducting polymer were characterized utilizing X‐ray scattering, near edge X‐ray absorption fine structure spectroscopy, ultraviolet photoelectron spectroscopy, and thin‐film field effect transistors to determine how oxidation of the thiophene ring systems impacts the structural and electronic properties of the polymer. The thiophene‐S,S‐dioxide polymers have lower optical and electrical band gaps than corresponding thiophene polymers. X‐ray scattering results indicate that the polymers are well ordered with the π–π stacking distances increased by 0.4 Å relative to analogous thiophene polymers. The electrical stability of these polymers is poor in transistors with a drop in the field effect mobility by approximately one order of magnitude upon addition of just 5% of the thiophene‐S,S‐dioxide unit in a copolymer with thiophene. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Novel high‐performance polymer memory devices containing (OMe)2tetraphenyl‐p‐phenylenediamine moieties

The functional polyimide (OMe)₂TPPA‐6FPI ( PI ) and the polyamide (OMe)₂TPPA‐6FPA ( PA ) consisting of electron‐donating N,N′‐bis(4‐aminophenyl)‐N,N′‐di(4‐methoxylphenyl)1,4‐phenylenediamine [(OMe)₂TPPA‐diamine] for memory application were prepared in this study. These polyimide and polyamide memory devices were fabricated with the sandwich configuration of indium tin oxide (ITO)/polymer/Al, and could be switched from the initial low‐conductivity (OFF) state to the high‐conductivity (ON) state with high ON/OFF current ratios of 10⁷ and 10⁹, respectively. PI exhibited dynamic random access memory (DRAM) performance, whereas PA showed static random access memory (SRAM) behavior. To get more insight into the memory behaviors of these two different types of polymer memory devices, molecular simulation on the basic unit was carried out. Furthermore, the differences of highest occupied molecular orbital (HOMO) energy level, lowest unoccupied molecular orbital (LUMO) charge density isosurfaces, dipole moment, and linkage conformation between PI and PA were found to affect the volatile memory behavior. Both polymer memory devices revealed excellent stability with long operation time of 10⁴ s at continuous applied voltage of ‐2 V. The effect of polymer thickness on the volatile memory behavior of PA was also investigated in this study. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis,Characterization, and Reactivity of Novel 6H‐1,3,5‐Oxathiazine S,S‐Dioxides

A series of novel 6H‐1,3,5‐oxathiazine S,S‐dioxides were synthesized by the m‐CPBA oxidation (2.2 equiv) of 6H‐1,3,5‐oxathizines. The synthetic utilities of the newly synthesized cyclic sulfones were investigated. In a thermal condition, compounds 6H‐1,3,5‐oxathiazine S,S‐dioxides were found relatively stable, but Lewis acid‐induced thermal reaction afforded the corresponding amides. The plausible pathway to amides from 6H‐1,3,5‐oxathiazine S,S‐dioxides was also discussed in this account.     

Chain transfer to solvent in the radical polymerization of N‐isopropylacrylamide

Chain transfer to solvent has been investigated in the conventional radical polymerization and nitroxide‐mediated radical polymerization (NMP) of N‐isopropylacrylamide (NIPAM) in N,N‐dimethylformamide (DMF) at 120 °C. The extent of chain transfer to DMF can significantly impact the maximum attainable molecular weight in both systems. Based on a theoretical treatment, it has been shown that the same value of chain transfer to solvent constant, C_tr,S, in DMF at 120 °C (within experimental error) can account for experimental molecular weight data for both conventional radical polymerization and NMP under conditions where chain transfer to solvent is a significant end‐forming event. In NMP (and other controlled/living radical polymerization systems), chain transfer to solvent is manifested as the number‐average molecular weight (M_n) going through a maximum value with increasing monomer conversion. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Metallocene‐mediated cationic ring‐opening polymerization of 2‐methyl‐ and 2‐phenyl‐oxazoline

The cationic ring‐opening polymerization of 2‐methyl‐2‐oxazoline and 2‐phenyl‐2‐oxazoline was efficiently used using bis(η⁵‐cyclopentadienyl)dimethyl zirconium, Cp₂ZrMe₂, or bis(η⁵‐tert‐butyl‐cyclopentadienyl)dimethyl hafnium in combination with either tris(pentafluorophenyl)borate or tetrakis(pentafluorophenyl)borate dimethylanilinum salt as initiation systems. The evolution of polymer yield, molecular weight, and molecular weight distribution with time was examined. In addition, the influence of the initiation system and the monomer on the control of the polymerization was studied. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 000: 000–000, 2011     

R‐RAFT approach for the polymerization of N‐isopropylacrylamide with a star poly(ε‐caprolactone) core

Reversible addition‐fragmentation chain transfer (RAFT) polymerization is a more robust and versatile approach than other living free radical polymerization methods, providing a reactive thiocarbonylthio end group. A series of well‐defined star diblock [poly(ε‐caprolactone)‐b‐poly(N‐isopropylacrylamide)]₄ (SPCLNIP) copolymers were synthesized by R‐RAFT polymerization of N‐isopropylacrylamide (NIPAAm) using [PCL‐DDAT]₄ (SPCL‐DDAT) as a star macro‐RAFT agent (DDAT: S‐1‐dodecyl‐S′‐(α, α′‐dimethyl‐α″‐acetic acid) trithiocarbonate). The R‐RAFT polymerization showed a controlled/“living” character, proceeding with pseudo‐first‐order kinetics. All these star polymers with different molecular weights exhibited narrow molecular weight distributions of less than 1.2. The effect of polymerization temperature and molecular weight of the star macro‐RAFT agent on the polymerization kinetics of NIPAAm monomers was also addressed. Hardly any radical–radical coupling by‐products were detected, while linear side products were kept to a minimum by careful control over polymerization conditions. The trithiocarbonate groups were transferred to polymer chain ends by R‐RAFT polymerization, providing potential possibility of further modification by thiocarbonylthio chemistry. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of new sulfone‐derivatized phenylenevinylene‐based conjugated copolymers with evolving energy levels and gaps

A new series of stable, processable, and chain end functionalizable sulfone‐derivatized phenylenevinylene‐based conjugated polymers (SFPVs) containing different donor type comonomers have been synthesized and characterized. The polymer main chains are consisted of a sulfone‐phenylene electron accepting unit coupled with an electron donating unit which is derived from one of the dialdehyde comonomers based on benzene, thiophene, and pyrrole (with or without alkoxy side chains). The optical energy gaps (E_g) of the new polymers (in solvent) are in a range of 1.9–2.3 eV, with the lowest energy gap obtained from the polymer containing pyrrole as the donor unit. By using a combination of strong donor unit (such as pyrrole) and a relatively weak but stable acceptor unit (sulfone‐substituted benzene), E_g of the conjugated polymers can be tailored to below 2 eV, while the vinylene bonds on the polymer main chain are still chemically stable to survive strong basic conditions as compared with the S,S‐dioxo‐thiophene‐based PTV polymers developed earlier for potential supra‐molecular block copolymer systems. The lowest energy gap P(Pyrrole‐SFPV) exhibited 10 times better photoelectric power conversion efficiency than P(TV‐SFPV). © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Crystallization and stereocomplexation behavior of poly(D‐ and L‐lactide)‐b‐poly(N,N‐dimethylamino‐2‐ethyl methacrylate) block copolymers

The thermal properties, crystallization, and morphology of amphiphilic poly(D ‐lactide)‐b‐poly(N,N‐dimethylamino‐2‐ethyl methacrylate) (PDLA‐b‐PDMAEMA) and poly (L ‐lactide)‐b‐poly(N,N‐dimethylamino‐2‐ethyl methacrylate) (PLLA‐b‐PDMAEMA) copolymers were studied and compared to those of the corresponding poly(lactide) homopolymers. Additionally, stereocomplexation of these copolymers was studied. The crystallization kinetics of the PLA blocks was retarded by the presence of the PDMAEMA block. The studied copolymers were found to be miscible in the melt and the glassy state. The Avrami theory was able to predict the entire crystallization range of the PLA isothermal overall crystallization. The melting points of PLDA/PLLA and PLA/PLA‐b‐PDMAEMA stereocomplexes were higher than those formed by copolymer mixtures. This indicates that the PDMAEMA block is influencing the stability of the stereocomplex structures. For the low molecular weight samples, the stereocomplexes particles exhibited a conventional disk‐shape structure and, for high molecular weight samples, the particles displayed unusual star‐like shape morphology. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 49: 1397–1409, 2011     

Synthesis and photovoltaic properties of copolymers based on bithiophene and bithiazole

Three simple structured D‐A copolymers, PBTBTz‐1 , PBTBTz‐2 , and PBTBTz‐3 , containing bithiophene (BT) donor unit and bithiazole (BTz) acceptor unit with different alkyl chain length were synthesized by the Pd‐catalyzed Stille‐coupling method. The copolymers were characterized by thermogravimetric analysis, UV–vis absorption, electrochemical cyclic voltammetry, and photovoltaic measurements. The results indicate that the introduction of BTz unit to the polythiophene main chain effectively decreases highest occupied molecular orbital levels of the copolymers and increases the open circuit voltage (V_oc) of polymer solar cells (PSCs) based on the copolymers as donor, and the alkyl chain length influences the photovoltaic properties of the polymers significantly. The PSCs based on PBTBTz‐2 and PBTBTz‐3 show higher V_oc up to 0.77 and 0.81 V, respectively. The power conversion efficiency of the PSC based on PBTBTz‐2 :PC₇₀BM = 1:1(w/w) reached 2.58% with short circuit current of 8.70 mA/cm², under the illumination of AM1.5, 100 mW/cm². © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of fluorene‐based oligomers and polymers incorporating N‐arylphenothiazine‐S,S‐dioxide units

A series of 3,7‐bis(9,9‐di‐n‐hexylfluoren‐2‐yl)‐N‐arylphenothiazine‐S,S‐dioxide trimers and (9,9‐di‐n‐octylfluorene‐2,7‐diyl‐co‐N‐arylphenothiazine‐S,S‐dioxide) co‐polymers, with varying ratios of phenothiazine‐S,S‐dioxide units, have been prepared in good yields by palladium‐catalyzed cross‐coupling reactions. The materials are deep blue emitters and show no solvatochromism or evidence for an intramolecular charge‐transfer state. The photoluminescence quantum yields of the trimers are ?_PL 15–30% in solution and 14–25% in films. The polymers demonstrated very high values in solution (?_PL 74–84%) and ?_PL values in films of 28–47%. The estimated HOMO energy levels are between ?5.64 and ?5.62 eV for the polymers with 15% incorporation of the phenothiazine‐S,S‐dioxide units. An analogous N‐arylphenothiazine co‐polymer shows significantly red shifted absorption and emission. Solution electrochemical data and density functional theory calculations are also presented. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and applications of cyano‐vinylene‐based polymers containing cyclopentadithiophene and dithienosilole units for photovoltaic cells

Two β‐cyano‐thiophenevinylene‐based polymers containing cyclopentadithiophene ( CPDT‐CN ) and dithienosilole ( DTS‐CN ) units were synthesized via Stille coupling reaction with Pd(PPh₃)₄ as a catalyst. The effects of the bridged atoms (C and Si) and cyano‐vinylene groups on their thermal, optical, electrochemical, charge transporting, and photovoltaic properties were investigated. Both polymers possessed the highest occupied molecular orbital (HOMO) levels of about ?5.30 eV and the lowest unoccupied molecular orbital (LUMO) levels of about ?3.60 eV, and covered broad absorption ranges with narrow optical band gaps (ca. 1.6 eV). The bulk heterojunction polymer solar cell (PSC) devices containing an active layer of electron‐donor polymers ( CPDT‐CN and DTS‐CN ) blended with an electron‐acceptor, that is, [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PC₆₁BM) or [6,6]‐phenyl‐C₇₁‐butyric acid methyl ester (PC₇₁BM), in different weight ratios were explored under 100 mW/cm² of AM 1.5 white‐light illumination. The PSC device based on DTS‐CN: PC₇₁BM (1:2 w/w) exhibited a best power conversion efficiency (PCE) value of 2.25% with V_oc = 0.74 V, J_sc = 8.39 mA/cm², and FF = 0.36. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Synthesis of poly(N‐9‐ethylcarbazole‐exo‐norbornene‐5,6‐dicarboximide) for hole‐transporting layer in hybrid organic light‐emitting devices

We synthesized new polynorbornene dicarboximide (PCaNI) functionalized with hole‐transporting carbazole moieties and its copolymer (PCaNA) by ring‐opening metathesis polymerization (ROMP), where the PCaNA was further reacted with 3‐amino‐triethoxysilane to prepare PCaNI/silica hybrid. We also investigated the feasibility of PCaNI and PCaNI/silica hybrid (PCaSi) as a hole‐transporting material for hybrid organic light emitting devices (HOLEDs). To improve the performance of the PCaNI‐based HOLEDs, N,N′‐diphenyl‐N,N′‐(3‐methylphenyl)‐[1,1′‐biphenyl]‐4‐4′‐diamine (TPD) was also introduced into the PCaNI matrix. Results showed that PCaNI exhibited high glass transition temperature (～260 °C) and high optical transparency in the visible region. The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) of PCaNI were measured as 5.6 and 2.2 eV, while the TPD‐doped PCaNI showed 5.7 eV (HOMO) and 2.6 eV (LUMO). The PCaNI/silica hybrid nanolayers showed excellent solvent resistance due to the formation of covalent bonds between ITO and PCaNI. The HOLEDs with PCaNI/TPD or PCaSi/TPD hybrid nanolayers exhibited relatively higher luminance (～10,000 cd/m²), lower operating voltage (～6.5 V at 300 cd/m²), and higher current efficiency (～2.7 cd/A). © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis,optical and electrochemical properties of arylenevinylene‐based π‐conjugated polymers with imidazolium units in the main chain

Arylenevinylene‐based π‐conjugated polymers containing imidazolium cationic units in the main chain and their model compounds were synthesized and characterized in terms of optical and electrochemical properties. 9,9‐Bisoctylfluorene, 2,5‐bisdodecyloxybenzene, and 3‐dodecylthiophene were introduced as arylene units with different donor characteristics to evaluate the effect on the highest occupied molecular orbital‐lowest unoccupied molecular orbital (HOMO‐LUMO) gap energy. The UV–vis and fluorescence spectra of cationic polymers and model compounds with iodide counter anion exhibited a significant blue shift with respect to the parent neutral molecules. X‐ray single crystal analysis for model compounds revealed that the effective π‐conjugation length of cationic model compounds decreased compared to the neutral model compounds by means of twisted conformation directed by CH‐π interactions between N‐methyl groups of imidazolium and neighboring aryl units. The cyclic voltammetry measurement suggested the negative shift of LUMO levels by the conversion of imidazole to imidazolium, indicating the electron‐accepting characteristics of cationic imidazolium unit. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Controllable ring‐opening copolymerization of L‐lactide and (3S)‐benzyloxymethyl‐(6S)‐methyl‐morpholine‐2,5‐dione initiated by a biogenic compound creatinine acetate

Ring‐opening copolymerization (ROCP) of L ‐lactide (L ‐LA) and (3S)‐benzyloxymethyl‐(6S)‐methyl‐morpholine‐2,5‐dione [(3S, 6S)‐BMMD] initiated by creatinine acetate, a biogenic organic compound, was performed in the bulk at 130 °C. The copolymerization was well controlled as evidenced by that both the measured values of number‐average molecular weight (M_n,NMR(OH) and M_n,NMR(COOH)) and serine molar fraction (F_Bz.ser) of synthesized copolymers were close to the corresponding theoretical values; and that the higher isotacticity of synthesized copolymers (85–86%) and lower racemization degree of the ROCP. After removing O‐benzyls of the copolymers with Et₃SiH/Et₃N/CH₂Cl₂ under catalysis of PdCl₂, functional biodegradable copolymers of L ‐lactic acid (L ‐Lac) and L ‐Ser with designed molar fraction of serine (F_ser 1.35%, 3.57%, 5.41%), narrow molecular weight distribution (polydispersity index 1.10–1.36), and improved hydrophilicity (θ_stat 82.3–89.6°) were finally obtained. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Samarium powder as catalyst for SET‐LRP of acrylonitrile in 1,1,1,3,3,3‐hexafluoro‐2‐propanol for control of molecular weight and tacticity

Samarium powder was applied as a catalyst for single electron transfer‐living radical polymerization (SET‐LRP) of acrylonitrile (AN) in 1,1,1,3,3,3‐hexafluoro‐2‐propanol (HFIP) with 2‐bromopropionitrile as initiator and N,N,N′,N′‐tetramethylethylenediamine as ligand. First‐order kinetics of polymerization with respect to the monomer concentration, linear increase of the molecular weight with monomer conversion, and the highly syndiotactic polyacrylonitrile (PAN) obtained indicate that the SET‐LRP of AN could simultaneously control molecular weight and tacticity of PAN. An increase in syndiotacticity of PAN obtained in HFIP was observed compared with that obtained by SET‐LRP in N,‐N‐dimethylformamide (DMF). The syndiotacticity markedly increased with the HFIP volume. The syndiotacticity of PAN prepared by SET‐LRP of AN using Sm powder as catalyst in DMF was higher than that prepared with Cu powder as catalyst. The increase in syndiotacticity of PAN with Sm content was more pronounced than the increase in its isotacticity. The block copolymer PAN‐b‐polymethyl methacrylate (52,310 molecular weight and 1.34 polydispersity) was successfully prepared. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Growing poly(N‐vinylcarbazole) from the surface of graphene oxide via RAFT polymerization

A new approach on usage of S‐1‐dodecyl‐S′‐(α,α′‐dimethyl‐α″‐acetic acid)trithiocarbonate (DDAT)‐covalently functionalized graphene oxide (GO) as reversible addition fragmentation chain transfer (RAFT) agent for growing of poly(N‐vinylcarbazole) (PVK) directly from the surface of GO was described. The PVK polymer covalently grafted onto GO has M_n of 8.05 × 10³, and a polydispersity of 1.43. The resulting material PVK‐GO shows a good solubility in organic solvents when compared to GO, and a significant energy bandgap of ～2.49 eV. Bistable electrical switching and nonvolatile rewritable memory effect, with a turn‐on voltage of about ?1.7 V and an ON/OFF state current ratio in excess of 10³, are demonstrated in the Al/PVK‐GO/ITO structure. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and photovoltaic properties of low‐bandgap 4,7‐dithien‐2‐yl‐2,1,3‐benzothiadiazole‐based poly(heteroarylenevinylene)s

Three novel low‐bandgap copolymers containing alkylated 4,7‐dithien‐2‐yl‐2,1,3‐benzothiadiazole (HBT) and different electron‐rich functional groups (dialkylfluorene (PFV‐HBT), dialkyloxyphenylene (PPV‐HBT) and dialkylthiophene (PTV‐HBT)) were prepared by Horner polycondensation reactions and characterized by ¹H NMR, gel permeation chromatography, and elemental analysis. The alkyl side chain brings these polymeric materials good solubility in common organic solvents, which is critical for the manufacture of solar cells in a cost‐effective manner. The copolymers exhibit low optical bandgap from 1.48 to 1.83 eV. The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels of the copolymers were measured by cyclic voltammetry. Theoretical calculations revealed that the variation laws of HOMO and the LUMO energy levels are well consistent with cyclic voltammetry measurement. The bulk heterojunction photovoltaic devices with the structure of ITO/PEDOT‐PSS/polymer:PCBM/LiF/Al were fabricated by using the three copolymers as the donor and (6,6)‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM) as the acceptor in the active layer. The device based on PTV‐HBT:PCBM (1:4 w/w) achieved a power conversion efficiency of 1.05% under the illumination of AM 1.5, 100 mW/cm². © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

A photo‐degradable helix: Synthesis,structure, and photolysis of optically active poly[2,7‐bis(4‐t‐butylphenyl)‐9‐methylfluoren‐9‐yl acrylate]

2,7‐Bis(4‐t‐butylphenyl)‐9‐methylfluoren‐9‐yl acrylate ( BBPMFA ) was synthesized and polymerized using α,α′‐azobisisobutyronitrile or n‐Bu₃B‐air as a radical initiator and using the complex of 9‐fluorenyllithium with (S)‐(+)‐1‐(2‐pyrrolidinylmethyl)pyrrolidine as an optically active anionic initiator. Although the radical polymerization led to rather low‐molecular‐weight products at low yields, the anionic polymerization afforded polymers with higher molecular weights in higher yields. The poly( BBPMFA ) obtained by the anionic polymerization was slightly rich in isotacticity (meso diad 57%) and showed an intense circular dichroism (CD) spectrum and large dextrorotation. The intensity of the CD spectrum and magnitude of optical activity increased with an increase in M_n, suggesting that the polymer possesses a preferred‐handed helical conformation. The CD spectrum disappeared within 1 s on irradiation to the polymer in a CHCl₃ solution using a 500‐W Hg‐Xe lamp. This was ascribed to fast photolysis of the ester linkage leading to a loss of helical conformation of the entire chain. Photolysis products of poly( BBPMFA ) were poly(acrylic acid) and 2,7‐bis(4‐t‐butylphenyl)‐9‐methylenefluorene (2,7‐bis(4‐t‐butylphenyl)dibenzofulvene). The photolysis reaction seemed to proceed through the “unzipping” mechanism. The rate constant of photolysis of poly( BBPMFA ) under irradiation at monochromated 325 nm was around 0.01 s^?1 independent of molecular weight. Photolysis at 325 nm was approximately 2400 times faster than that for chemical ester solvolysis under a neutral condition in the dark. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Facile synthesis of 4‐substituted 3,4‐dihydro‐1H‐2,1,3‐benzothiadiazine 2,2‐dioxides

A new method for the preparation of 4‐substituted 3,4‐dihydro‐1H‐2,1,3‐benzothiadiazine 2,2‐dioxides is described. Treatment of t‐butyl N‐phenylsulfamoylcarbamate derivatives ( 1 ) with different aldehydes afforded the corresponding intramolecular cyclized products 2 under trifluoroacetic acid conditions. © 2011 Wiley Periodicals, Inc. Heteroatom Chem 22:192–197, 2011; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.20670     

Chiral recognition in molecular and macromolecular pairs of (S)‐ and (R)‐1‐cyano‐2‐methylpropyl‐4′‐ {[4‐(8‐vinyloxyoctyloxy)benzoyl]oxy}biphenyl‐4‐ carboxylate enantiomers

(S)‐1‐Cyano‐2‐methylpropyl‐4′‐{[4‐(8‐vinyloxyoctyloxy)benzoyl]oxy}biphenyl‐ 4‐carboxylate [ (S)‐11 ] and (R)‐1‐cyano‐2‐methylpropyl‐4′‐{[4‐(8‐vinyloxyoctyloxy)benzoyl]oxy}biphenyl‐4‐carboxylate [( R)‐11 ] enantiomers, both greater than 99% enantiomeric excess, and their corresponding homopolymers, poly[ (S)‐11 ] and poly[ (R)‐11 ], with well‐defined molecular weights and narrow molecular weight distributions were synthesized and characterized. The mesomorphic behaviors of (S)‐11 and poly[ (S)‐11 ] are identical to those of (R)‐11 and poly[ (R)‐11 ], respectively. Both (S)‐11 and (R)‐11 exhibit enantiotropic S_A, S, and S_X (unidentified smectic) phases. The corresponding homopolymers exhibit S_A and S phases. The homopolymers with a degree of polymerization (DP) less than 6 also show a crystalline phase, whereas those with a DP greater than 10 exhibit a second S_X phase. Phase diagrams were investigated for four different pairs of enantiomers, (S)‐11 /( R)‐11 , (S)‐11 /poly[ (R)‐11 ], and poly[ (S)‐11 ]/poly[ (R)‐11 ], with similar and dissimilar molecular weights. In all cases, the structural units derived from the enantiomeric components are miscible and, therefore, isomorphic in the S_A and S phases over the entire range of enantiomeric composition. Chiral molecular recognition was observed in the S_A and S_X phases of the monomers but not in the S_A phase of the polymers. In addition, a very unusual chiral molecular recognition effect was detected in the S phase of the monomers below their crystallization temperature and in the S phase of the polymers below their glass‐transition temperature. In the S phase of the monomers above the melting temperature and of the polymers above the glass‐transition temperature, nonideal solution behavior was observed. However, in the S_A phase the monomer–polymer and polymer–polymer mixtures behave as an ideal solution. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3631–3655, 2000