Configurations conducive to the formation of intramolecular excimers in poly(N‐vinyl carbazole) and its copolymers

The ratios of the intensity of excimer and monomer emissions, denoted I_E/I_M, in poly(N‐vinyl carbazole) and copolymers of N‐vinyl carbazole and methyl methacrylate were measured with steady‐state fluorescence. Measurements were performed in dilute solutions of several fluid solvents at 25 °C and in a solid matrix of poly(methyl methacrylate) at room temperature. The values of I_E/I_M depended on the nature of the solvent, the emission wavelength, and the copolymer composition. Molecular dynamics simulations were performed for diastereoisomers of 2,4‐di(N‐carbazolyl)pentane and for isotactic and syndiotactic trichromophoric copolymer fragments to assist in the identification of the thermally accessible conformations capable of forming intramolecular excimers and the configurational relationship of the carbazole units in these complexes. Nearest neighbor carbazole groups made the dominant contribution to the excimers. Excimers were more likely in isotactic sequences than in syndiotactic sequences, as was also the case for the low‐energy excimer arising from the complete overlap of two carbazole units. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1272–1281, 2001     

Mesogen‐controlled ion channel of star‐shaped hard–soft block copolymers for solid‐state lithium‐ion battery

Novel star‐shaped hard–soft triblock copolymers, 4‐arm poly(styrene)‐block‐poly [poly(ethylene glycol) methyl ethyl methacrylate]‐block‐poly{x‐[(4‐cyano‐4′‐biphenyl) oxy] alkyl methacrylate} (4PS‐PPEGMA‐PMAxLC) (x = 3, 10), with different mesogen spacer length are prepared by atom‐transfer radical polymerization. The star copolymers comprised three different parts: a hard polystyrene (PS) core to ensure the good mechanical property of the solid‐state polymer, and a soft, mobile poly[poly(ethylene glycol) methyl ethyl methacrylate] (PPEGMA) middle sphere responsible for the high ionic conductivity of the solid polyelectrolytes, and a poly{x‐[(4‐cyano‐4′‐biphenyl)oxy]alkyl methacrylate} with a birefringent mesogens at the end of each arm to tuning the electrolytes morphology. The star‐shaped hard–soft block copolymers fusing hard PS core with soft PPEGMA segment can form a flexible and transparent film with dimensional stability. Thermal annealing from the liquid crystalline states allows the cyanobiphenyl mesogens to induce a good assembly of hard and soft blocks, consequently obtaining uniform nanoscale microphase separation morphology, and the longer spacer is more helpful than the shorter one. There the ionic conductivity has been improved greatly by the orderly continuous channel for efficient ion transportation, especially at the elevated temperature. The copolymer 4PS‐PPEGMA‐PMA10LC shows ionic conductivity value of 1.3 × 10^?4 S cm^?1 (25 °C) after annealed from liquid crystal state, which is higher than that of 4PS‐PPEGMA electrolyte without mesogen groups. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4341–4350     

Light‐driven and aggregation‐induced emission from side‐chain azoindazole polymers

The well‐defined azoindazole‐containing homopolymer, poly(6‐{6‐[(4‐dimethylamino) phenylazo]‐indazole}‐hexyl methacrylate) (PDHMA), and amphiphilic diblock copolymer, poly({6‐[6‐(4‐dimethylamino)phenylazo]‐indazole}‐hexyl methacrylate)‐b‐poly(2‐(dimethylamino)ethylmethacrylate) (PDHMA_m‐b‐PDMAEMA_n), were successfully prepared via reversible addition‐fragmentation chain transfer polymerization technique. The homopolymer and amphiphilic diblock copolymer in CH₂Cl₂ exhibited intense fluorescence emission accompanied by trans–cis photoisomerization of azoindazole group under UV irradiation. The experiment results indicated that the intense fluorescence emission may be attributed to an inhibition of photoinduced electron transfer of the cis form of azoindazole. On the other hand, the intense fluorescence emission of amphiphilic diblock copolymers in water‐tetrahydrofuran mixture was observed, which increased with the volume ratio of water in the mixed solvent. The self‐aggregation behaviors of three amphiphilic diblock copolymers were examined by transmission electron microscopy, laser light scattering, and UV–vis spectra. The restriction of intramolecular rotation of the azoindazole groups in aggregates was considered as the main cause of aggregation‐induced fluorescence emission. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Tuning amphiphilicity/temperature‐induced self‐assembly and in‐situ disulfide crosslinking of reduction‐responsive block copolymers

New poly(ethylene oxide)‐based block copolymers (ssBCs) with a random copolymer block consisting of a reduction‐responsive disulfide‐labeled methacrylate (HMssEt) and a thermoresponsive di(ethylene glycol)‐containing methacrylate (MEO₂MA) units were synthesized. The ratio of HMssEt/MEO₂MA units in the random P(MEO₂MA‐co‐HMssEt) copolymer block enables the characteristics of well‐defined ssBCs to be amphiphilic or thermoresponsive and double hydrophilic. Their amphiphilicity or temperature‐induced self‐assembly results in nanoaggregates with hydrophobic cores having different densities of pendant disulfide linkages. The effect of disulfide crosslinking density on morphological variation of disulfide‐crosslinked nanogels is investigated. In response to reductive reactions, the partial cleavage of pendant disulfide linkages in the hydrophobic cores converts the physically associated aggregates to disulfide‐crosslinked nanogels. The occurrence of in‐situ disulfide crosslinks provides colloidal stability upon dilution. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2057–2067     

A successive route to amphiphilic graft copolymers with a hydrophilic poly(3‐hydroxypropyl methacrylate) backbone and hydrophobic polystyrene side chains

A successive method for preparing novel amphiphilic graft copolymers with a hydrophilic backbone and hydrophobic side chains was developed. An anionic copolymerization of two bifunctional monomers, namely, allyl methacrylate (AMA) and a small amount of glycidyl methacrylate (GMA), was carried out in tetrahydrofuran (THF) with 1,1‐diphenylhexyllithium (DPHL) as the initiator in the presence of LiCl ([LiCl]/[DPHL]₀ = 2), at −50 °C. The copolymer poly(AMA‐co‐GMA) thus obtained possessed a controlled molecular weight and a narrow molecular weight distribution (M_w /M_n = 1.08–1.17). Without termination and polymer separation, a coupling reaction between the epoxy groups of this copolymer and anionic living polystyrene [poly(St)] at −40 °C generated a graft copolymer with a poly(AMA‐co‐GMA) backbone and poly(St) side chains. This graft copolymer was free of its precursors, and its molecular weight as well as its composition could be well controlled. To the completed coupling reaction solution, a THF solution of 9‐borabicyclo[3.3.1]nonane was added, and this was followed by the addition of sodium hydroxide and hydrogen peroxide. This hydroboration changed the AMA units of the backbone to 3‐hydroxypropyl methacrylate, and an amphiphilic graft copolymer with a hydrophilic poly(3‐hydroxypropyl methacrylate) backbone and hydrophobic poly(St) side chains was obtained. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1195–1202, 2000     

H‐shaped (ABCDE type) quintopolymer via click reaction [3 + 2] strategy

H‐shaped quintopolymer containing different five blocks: poly(ε‐caprolactone) (PCL), polystyrene (PS), poly(ethylene glycol) (PEG), and poly(methyl methacrylate) (PMMA) as side chains and poly(tert‐butyl acrylate) (PtBA) as a main chain was simply prepared from a click reaction between azide end‐functionalized PCL‐PS‐PtBA 3‐miktoarm star terpolymer and PEG–PMMA‐block copolymer with alkyne at the junction point, using Cu(I)/N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) as a catalyst in DMF at room temperature for 20 h. The H‐shaped quintopolymer was obtained with a number–average molecular weight (M_n) around 32,000 and low polydispersity index (M_w/M_n) 1.20 as determined by GPC analysis in THF using PS standards. The click reaction efficiency was calculated to have 60% from ¹H NMR spectroscopy. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4459–4468, 2008     

“Smart” poly(2‐(dimethylamino)ethyl methacrylate‐ran‐9‐(4‐vinylbenzyl)‐9H‐carbazole) copolymers synthesized by nitroxide mediated radical polymerization

A series of poly(2‐(dimethylamino)ethyl methacrylate‐ran‐9‐(4‐vinylbenzyl)‐9H‐carbazole) (poly(DMAEMA‐ran‐VBK)) random copolymers, with VBK molar feed compositions f_VBK,0 = 0.02–0.09, were synthesized using 10 mol % [tert‐butyl[1‐(diethoxyphosphoryl)‐2,2‐dimethylpropyl]amino] nitroxide (SG1) relative to 2‐([tert‐butyl[1‐(diethoxyphosphoryl)‐2,2‐dimethylpropyl]amino]oxy)‐2‐methylpropionic acid (BlocBuilder) at 80 °C and 90 °C. Controlled polymerizations were observed, even with f_VBK,0 = 0.02, as reflected by a linear increase in number average molecular weight (M_n) versus conversion X ≤ 0.6 with final copolymers characterized by relatively narrow, monomodal molecular weight distributions (M_w/M_n ≈ 1.5). Poly(DMAEMA‐ran‐VBK) copolymers were deemed sufficiently pseudo‐“living” to reinitiate a second batch of N,N‐dimethylacrylamide (DMAA), with very few apparent dead chains, as indicated by the monomodal shift in the gel permeation chromatography chromatograms. Poly(DMAEMA‐ran‐VBK) random copolymers exhibited tuneable lower critical solution temperature (LCST), in aqueous solution, by modifying copolymer composition, solution pH and by the addition of the water‐soluble poly(DMAA) segment. ¹H NMR analysis determined that, in water, the VBK units of the poly(DMAEMA‐ran‐VBK) random copolymer were segregated to the interior of the copolymer aggregate regardless of solution temperature and that poly(DMAEMA‐ran‐VBK)‐b‐poly(DMAA) block copolymers formed micelles above the LCST. In addition, the final random copolymer and block copolymer exhibited temperature dependent fluorescence due to the VBK units. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Tunable morphologies of rhenium complex‐containing polystyrene‐block‐poly(2‐vinylpyridine) aggregates

Polystyrene‐block‐poly(2‐vinylpyridine) (PS‐b‐P2VP) diblock copolymer was functionalized with luminescent chlorotricarbonyl rhenium (I) phenanthroline complex in the presence of silver perchlorate. The copolymer‐metal complex showed high sensitivity to the solvent system. Different morphologies and dimensions of the rhenium complex within nanosized micelles were controlled by changing the solvent systems. Core‐embedded rhenium complex within micelles appear by adding methanol, a poor solvent for the copolymer‐metal complex, to the solution of common solvent tetrahydrofuran (THF); the number of the core‐embedded rhenium complex and the scale of the micelles are strongly related to the addition of methanol. Moreover, a novel morphology of corona‐embedded rhenium complex micelles was prepared by dropping the original THF solution of copolymer‐metal complex into water at a low pH value. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2047–2053, 2008     

Synthesis of a well‐defined polyallene‐based amphiphilic graft copolymer via sequential living coordination polymerization and SET‐LRP

A well‐defined amphiphilic graft copolymer, poly(6‐methyl‐1,2‐heptadien‐4‐ol)‐g‐poly(2‐(dimethylamino)ethyl methacrylate) (PMHDO‐g‐PDMAEMA), has been synthesized by the combination of living coordination polymerization, single electron transfer‐living radical polymerization (SET‐LRP), and the grafting‐from strategy. PMHDO backbone containing double bonds and pendant hydroxyls was first prepared by [(η³‐allyl)NiOCOCF₃]₂‐initiated living coordination polymerization of 6‐methyl‐1,2‐heptadien‐4‐ol (MHDO) followed by treating the pendant hydroxyls with 2‐chloropropionyl chloride to give PMHDO‐Cl macroinitiator. SET‐LRP of 2‐(dimethylamino)ethyl methacrylate (DMAEMA) was performed in THF/H₂O using PMHDO‐Cl as macroinitiator and CuCl/Me₆TREN as catalytic system to afford the well‐defined PMHDO‐g‐PDMAEMA graft copolymer with a narrow molecular weight distribution (M_w/M_n = 1.28). The grafting density was as high as 92%. The critical micelle concentration (cmc) in water was determined by fluorescence probe technique and the micellar morphology was preliminarily explored by transmission electron microscopy. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis of star‐shaped copolymers with methyl methacrylate and n‐butyl methacrylate by metal‐catalyzed living radical polymerization: Block and random copolymer arms and microgel cores

Various star‐shaped copolymers of methyl methacrylate (MMA) and n‐butyl methacrylate (nBMA) were synthesized in one pot with RuCl₂(PPh₃)₃‐catalyzed living radical polymerization and subsequent polymer linking reactions with divinyl compounds. Sequential living radical polymerization of nBMA and MMA in that order and vice versa, followed by linking reactions of the living block copolymers with appropriate divinyl compounds, afforded star block copolymers consisting of AB‐ or BA‐type block copolymer arms with controlled lengths and comonomer compositions in high yields (≥90%). The lengths and compositions of each unit varied with the amount of each monomer feed. Star copolymers with random copolymer arms were prepared by the living radical random copolymerization of MMA and nBMA followed by linking reactions. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 633–641, 2002; DOI 10.1002/pola.10145     

Anionic alternating copolymerization of α‐arylacrylates with methyl methacrylate: Effect of monomer sequence on fluorescence

Anionic polymerizations of acrylates possessing 1‐pyrenyl (Py1), 1‐naphthyl (Np1), 2‐naphthyl (Np2), and 2‐fluorenyl (Fl2) groups as α‐substituents were investigated as well as the properties of the obtained polymers. Py1 and Np1 did not undergo polymerization, whereas Np2 and Fl2, annulated α‐phenylacrylates at 3,4‐position of the phenyl group, afforded homo‐oligomers and alternating copolymers with methyl methacrylate (MMA). The oligomer of Fl2 [oligo(Fl2)] exhibited strong excimer emission in diluted solution. In contrast, dominant monomer emission was observed for the alternating copolymer with MMA [poly(Fl2‐co‐MMA)]. In the alternating copolymer, MMA units could function as spacers preventing the association of pendant fluorene moieties to suppress the excimer formation. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2806–2814     

Amphiphilic conetworks. III. Poly(2,3‐dihydroxypropyl methacrylate)–polyisobutylene and poly(ethylene glycol) methacrylate–polyisobutylene based hydrogels prepared by two‐step polymer procedure

This article describes the synthesis and characterization of new amphiphilic polymer conetworks containing hydrophilic poly(2,3‐dihydroxypropyl methacrylate) or poly(ethylene glycol) methacrylate (PEGMA) and hydrophobic polyisobutylene chains. This conetworks were prepared by a two‐step polymer synthesis. In the first step, a cationic copolymer of isobutylene and 3‐isopropenyl‐α,α‐dimethylbenzyl isocyanate (IDI) was prepared. The isocyanate groups of the IB‐IDI random copolymer were subsequently transformed in situ to methacrylate (MA) groups in reaction with 2‐hydroxyethyl methacrylate (HEMA). In the second step, the resulting MA‐multifunctional PIB‐based crosslinker, PIB(MA)_n, with an average functionality of approximately four per chain, was copolymerized with 2,3‐dihydroxypropyl methacrylate or poly(ethylene glycol) methacrylate by radical mechanism in tetrahydrofuran giving rise to amphiphilic conetworks containing 11–60 mol % of DHPMA or 10–12 mol % of PEGMA. The synthesized conetworks were characterized with solid‐state ¹³C‐NMR spectroscopy and differential scanning calorimetry. The amphiphilic nature of the conetworks was proved by swelling in both water and n‐heptane. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4074–4081, 2007     

Charge transfer interactions in polyesters with a donor‐(σ‐bridge)‐acceptor moiety in the repeating unit

Two high molecular weight linear polyesters were investigated to gain insight in how the photophysics of electron donor‐(σ‐spacer)‐electron acceptor (DσA) compounds are affected by incorporation into a polymer. They were prepared by condensation of either adipoyl or sebacoyl chloride with a diol that was functionalized with an N,N‐dialkylaniline donor, a cyclohexyl type σ‐spacer, and a 1,1‐dicyanovinyl acceptor. The solubility, which is very low, and the thermal properties of the polyesters are dictated by physical crosslinking as a consequence of interchain donor‐acceptor interactions. Charge transfer (CT) absorption and emission are observed, which involve CT between DσA moieties of different chains rather than CT processes within a single DσA unit. As a result, the photophysics of the DσA units in the polyesters differs strongly from that of similar DσA compounds in solution. Upon swelling the polymers with THF, the CT fluorescence disappears partly. Analogous polymers containing only an N,N‐dialkylaniline donor display dual fluorescence; one band reflects local emission, while the other is attributed to excimer emission. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4775–4784, 2004     

Synthesis,self‐assembly,and formation of photo‐crosslinking‐stabilized fluorescent micelles covalently containing zinc(II)‐bis(8‐hydroxyquinoline) for ABC triblock copolymer bearing cinnamoyl and 8‐hydroxyquinoline side groups

Triblock copolymers (MPEG‐b‐PCEMA‐b‐PHQHEMA) bearing cinnamoyl and 8‐hydroxyquinoline side groups with different block length are synthesized by a two‐step reversible addition fragmentation chain transfer polymerization of cinnamoyl ethyl methacrylate (CEMA) and 2‐((8‐hydroxyquinolin‐5‐yl)methoxy)ethyl methacrylate (HQHEMA), respectively. The self‐assembly of MPEG‐b‐PCEMA‐b‐PHQHEMA in mixture of THF and ethanol is investigated by varying the ratio of THF and ethanol. Spheric micelles with diameter of 63.7 nm and polydispersity of 0.128 are obtained for MPEG₁₁₃‐b‐PCEMA₁₅‐b‐PHQHEMA₁₇ in THF/ethanol with a volume ratio (v/v) of 5/5. The PCEMA inner shell of the resulted micelles is photo‐crosslinked under UV radiation to give stabilized micelles. The complex reaction of the stabilized micelles with Zn(II) is investigated under different conditions to give zinc(II)‐bis(8‐hydroxyquinoline)(Znq₂)‐containing micelles. When the complex reaction is carried out in THF/ethanol (v/v = 5/5) or THF/toluene (v/v = 6/4) with zinc acetate, fluorescent Znq₂‐containing micelles are obtained without obvious change in diameters and morphologies. The fluorescent micelles exhibit green emission with λ_max at 520 nm. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1056–1064     

Synthesis and solvent‐dependent micellization of the amphiphilic block copolymer poly(styreneboronic acid)‐block‐polystyrene

The amphiphilic organoboron block copolymer poly (styreneboronic acid)‐block‐polystyrene ( PSBA‐b‐PS ) has been prepared through a postpolymerization modification route from the silicon‐functionalized block copolymer poly(4‐trimethylsilylstyrene)‐block‐polystyrene ( PSSi‐b‐PS ). PSBA‐b‐PS is obtained through highly selective reaction of PSSi‐b‐PS with BBr₃ at room temperature and subsequent hydrolysis of the BBr₂‐functionalized intermediate. Transmission electron microscopy studies demonstrate that PSBA‐b‐PS undergoes pH dependent micellization in aqueous solution. Different morphologies could be realized by using different mixtures of water and organic solvents. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2438–2445, 2010     

Behaviors of self‐assembled diblock copolymer with pendant photosensitive azobenzene segments

A novel monomer, ethyl 4‐[4‐(11‐methacryloyloxyundecyloxy)phenyl azobenzoyl‐oxyl] benzoate, containing a photoisomerizable N?N group was synthesized. The monomer was further diblock copolymerized with methyl methacrylate. Amphiphilic diblock copolymer poly(methyl methacrylate‐block‐ethyl 4‐[4‐(11‐methacryloyloxyundecyloxy)phenyl azobenzoyl‐oxyl] benzoate ( PMMA ‐ b ‐ PAzoMA ) was synthesized using atom transfer radical polymerization. The reverse micelles with spherical construction were obtained with 2 wt % of the diblock copolymer in a THF/H₂O mixture of 1:2. Under alternating UV and visible light illumination, reversible changes in micellar structure between sphere and rod‐like particles took place as a result of the reversible E‐Z photoisomerization of azobenzene segments in PMMA ‐ b ‐ PAzoMA . Microphase separation of the amphiphilic diblock copolymer in thin films was achieved through thermal and solvent aligning methods. The microphases of the annealed thin films were investigated using atom force microscopy topology and scanning electron microscopy analyses. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1142–1148, 2010     

Constructing novel double‐bond‐containing well‐defined amphiphilic graft copolymers via successive Ni‐catalyzed living coordination polymerization and SET‐LRP

A series of polyallene‐based well‐defined amphiphilic graft copolymers, poly(6‐methyl‐1,2‐heptadiene‐4‐ol)‐g‐poly(2‐(diethylamino)ethyl methacrylate) (PMHDO‐g‐PDEAEMA), was synthesized through the grafting‐from technique. First, double‐bond‐containing PMHDO backbone bearing pendant hydroxyls was prepared via [(η³‐allyl)NiOCOCF₃]₂‐initiated living coordination polymerization of 6‐methyl‐1,2‐heptadiene‐4‐ol (MHDO). The pendant hydroxyls in the homopolymer were then reacted with 2‐chloropropionyl chloride to give PMHDO‐Cl macroinitiator. Finally, hydrophilic PDEAEMA side chains were formed by single electron transfer‐living radical polymerization (SET‐LRP) of 2‐(diethylamino)ethyl methacrylate (DEAEMA) in THF/H₂O initiated by the macroinitiator using CuCl/Me₆TREN as catalytic system to afford PMHDO‐g‐PDEAEMA graft copolymers. The narrow molecular weight distributions (M_w/M_n ≤ 1.35) and kinetics experiment showed the controllability of SET‐LRP graft copolymerization of DEAEMA. The critical micelle concentration (cmc) of PMHDO‐g‐PDEAEMA amphiphilic graft copolymer in aqueous media was determined by fluorescence probe technique and the relationships between cmc and pH or salinity were also investigated. Micellar morphologies were preliminarily explored using transmission electron microscopy. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis of H‐shaped complex macromolecular structures by combination of atom transfer radical polymerization,photoinduced radical coupling,ring‐opening polymerization,and iniferter processes

Three controlled/living polymerization processes, namely atom transfer radical polymerization (ATRP), ring‐opening polymerization (ROP) and iniferter polymerization, and photoinduced radical coupling reaction were combined for the preparation of ABCBD‐type H‐shaped complex copolymer. First, α‐benzophenone functional polystyrene (BP‐PS) and poly(methyl methacrylate) (BP‐PMMA) were prepared independently by ATRP. The resulting polymers were irradiated to form ketyl radicals by hydrogen abstraction of the excited benzophenone moieties present at each chain end. Coupling of these radicals resulted in the formation of polystyrene‐b‐poly(methyl methacrylate) (PS‐b‐PMMA) with benzpinacole structure at the junction point possessing both hydroxyl and iniferter functionalities. ROP of ε‐caprolactone (CL) by using PS‐b‐PMMA as bifunctional initiator, in the presence of stannous octoate yielded the corresponding tetrablock copolymer, PCL‐PS‐PMMA‐PCL. Finally, the polymerization of tert‐butyl acrylate (tBA) via iniferter process gave the targeted H‐shaped block copolymer. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4601–4607     

Heteroarm H‐shaped terpolymers through click reaction

Heteroarm H‐shaped terpolymers, (polystyrene)(poly(methyl methacrylate))‐ poly(tert‐butyl acrylate)‐(polystyrene)(poly(methyl methacrylate)), (PS)(PMMA)‐PtBA‐(PMMA)(PS), and, (PS)(PMMA)‐poly(ethylene glycol)(PEG)‐(PMMA)(PS), through click reaction strategy between PS‐PMMA copolymer (as side chains) with an alkyne functional group at the junction point and diazide end‐functionalized PtBA or PEG (as a main chain). PS‐PMMA with alkyne functional group was prepared by sequential living radical polymerizations such as the nitroxide mediated (NMP) and the metal mediated‐living radical polymerization (ATRP) routes. The obtained H‐shaped polymers were characterized by using ¹H‐NMR, GPC, DSC, and AFM measurements. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1055–1065, 2007     

Energy migration in poly(N‐vinyl carbazole) and its copolymers with methyl methacrylate: Fluorescence polarization,quenching, and molecular dynamics

Fluorescence polarization and quenching measurements were used to examine intramolecular energy migration for poly(N‐vinyl carbazole) and copolymers of N‐vinyl carbazole with methyl methacrylate. Quenching measurements of the carbazole fluorescence by CCl₄ were performed in dilute solution in toluene, and fluorescence anisotropy, r, was measured for the chains dispersed in a solid matrix of poly(methyl methacrylate) (PMMA). The results suggested that the chains with a high carbazole content, that is, a high content of excimer trapping sites, do not show the highest values of the singlet energy‐migration rate. Isotropies, r^?1, of the samples in vitrified PMMA corroborated such conclusions. Molecular dynamics simulations on isotactic and syndiotactic trichromophoric copolymer fragments were used to obtain parameters related to the energy‐transfer process as a function of the methyl methacrylate content. The parameters from the simulations supported the interpretation of the experiments. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1615–1626, 2003