Vinyl esters: Low cytotoxicity monomers for the fabrication of biocompatible 3D scaffolds by lithography based additive manufacturing

Lithography based additive manufacturing technologies (AMT) like stereolithography or digital light processing have become appealing methods for the fabrication of 3D cellular scaffolds for tissue engineering and regenerative medicine. To circumvent the use of (meth)acrylate‐based photopolymers, that suffer from skin irritation and sometimes cytotoxicity, new monomers based on vinyl esters were prepared. In vitro cytotoxicity studies with osteoblast‐like cells proofed that monomers based on vinyl esters are significantly less cytotoxic than (meth)acrylates. Photoreactivity was followed by photo‐differential scanning calorimetry and the mechanical properties of the photocured materials were screened by nanoindentation. Conversion rates and indentation moduli between those of acrylate and methacrylate references could be observed. Furthermore, osteoblast‐like cells were successfully seeded onto polymer specimens. Finally, we were able to print a 3D test structure out of a vinyl ester‐based formulation by μ‐SLA with a layer thickness of 50 μm. For in vivo testing of vinyl esters these 3D scaffolds were implanted into surgical defects of the distal femoral bone of adult New Zealand white rabbits. The obtained histological results approved the excellent biocompatibility of vinyl esters. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

Biomaterials based on low cytotoxic vinyl esters for bone replacement application

In recent days, additive manufacturing technologies (AMT) based on photopolymerization have also found application in tissue engineering. Although acrylates and methacrylates have excellent photoreactivity and afford photopolymers with good mechanical properties, their cytotoxicity and degradation products disqualify them from medical use. Within this work, (meth)acrylate‐based monomers were replaced by vinyl esters with exceptional low cytotoxicity. The main focus of this paper lies on the determination of the photoreactivity and investigations concerning mechanical properties and degradation behavior of the new materials. Tested monomers provide sufficient photoreactivity for processing by AMT. Mechanical properties similar to natural bone could be obtained by adding suitable fillers like hydroxylapatite (HA). The right ratio of hydrophobic and hydrophilic monomers allows the tuning of the degradation behavior. Finally, with the optimum formulation, cellular 3D structures were built using digital light processing. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Toughness enhancers for bone scaffold materials based on biocompatible photopolymers

Providing access to the benefits of additive manufacturing technologies in tissue engineering, vinyl esters recently came into view as appropriate replacements for (meth)acrylates as precursors for photopolymers. Their low cytotoxicity and good biocompatibility as well as favorable degradation behavior are their main assets. Suffering from rather poor mechanical properties, particularly in terms of toughness, several improvements have been made over the last years. Especially, thiol–ene chemistry has been investigated to overcome those shortcomings. In this study, we focused on additional means to further improve the toughness of an already established biocompatible vinyl ester‐thiol formulation, eligible for digital light processing‐based stereolithography. All molecules were based on poly(ε‐caprolactone) as building block and the formulations were tested regarding their reactivity and the resulting mechanical properties. They all performed well as toughness enhancer, ultimately doubling the impact resistance of the reference system. © 2018 The Authors. Journal of Polymer Science Part A: Polymer Chemistry published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 110–119     

Biodegradable photocrosslinkable poly(depsipeptide‐co‐ε‐caprolactone) for tissue engineering: Synthesis,characterization, and In vitro evaluation

Stereolithography has become increasingly popular in scaffold fabrication due to automation and well‐controlled geometry complexity, and consequently, there is a great need for new suitable biodegradable photocrosslinkable polymers. In this study, a new type of photocrosslinkable poly(ester amide) was synthesized based on ε‐caprolactone and l ‐alanine‐derived depsipeptide and was applied to fabrication of three‐dimensional (3D) scaffolds by stereolithography. ¹H nuclear magnetic resonance and Fourier transform infra‐red analysis confirmed the formation of new bonds during the polymer synthesis. Incorporation of depsipeptide increased the glass transition temperature and hydrophilicity of the polymer and accelerated hydrolytic degradation compared with the poly(ε‐caprolactone) homopolymer. The compressive strength of the 3D scaffolds increased with the increasing depsipeptide content. This work demonstrated that incorporation of depsipeptide into photocrosslinkable polyesters resulted in excellent cytocompatibility and tunable degradation rates and mechanical properties and thus expanded the repertoire of biomaterials suitable for 3D photofabrication of high‐resolution tissue engineering scaffolds. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3307–3315     

Photopolymerization of biocompatible phosphorus‐containing vinyl esters and vinyl carbamates

Phosphorus‐containing vinyl esters and vinyl carbamates were synthesized as new biocompatible and degradable photopolymers. Reactivity of the monomers with one, two, and three polymerizable double bonds was evaluated by photo‐differential scanning calorimetry. With respect to their potential application in the biomedical field, studies on cytotoxicity, mechanical stability, and hydrolytic erosion behavior of the poly(vinyl alcohol)‐based derivatives were performed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2916–2924, 2010     

Well‐defined amphiphilic poly(p‐dioxanone)‐grafted poly(vinyl alcohol) copolymers: Synthesis and micellization

A series of amphiphilic biodegradable and biocompatible poly(p‐dioxanone)‐grafted poly(vinyl alcohol) (PVA) copolymers with well‐defined structure were obtained by a three‐step synthesis based on the “grafting from” concept. The first step (protection step), called the partial silylation of PVA hydroxyl groups, was accomplished by 1,1,1,3,3,3‐hexamethyldisilazane and catalyst chlorotrimethylsilane in dimethyl sulfoxide using THF as cosolvent. The second step was the ring‐opening polymerization of p‐dioxanone (PDO) initiated from the remaining OH groups of the partially silylated PVA. Finally, a deprotection step was followed: the silylether group was deprotected easily under very mild conditions. The synthetic conditions of the first two steps were investigated, and the structures of polymers formed in each step were characterized by various analytical methods. The results showed that the molecular structure of the PVA‐g‐PPDO could be controlled easily by the degree of silylation and the feed ratio. In addition, the micellization of amphiphilic PVA‐g‐PPDO copolymers in water was proved by fluorescence spectra and dynamic light scattering, and the relationship between structural parameters of copolymers and micellar properties was studied preliminarily. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Tough photopolymers based on vinyl esters for biomedical applications

Photocurable vinyl esters have recently been introduced as suitable alternatives to (meth)acrylates in biomedical applications. While (meth)acrylates exhibit good mechanical properties, their cytotoxicity and degradation products principally disqualify them from medical use. Vinyl esters exhibit much lower cytotoxicity and give biocompatible degradation products, but their disadvantage are relatively low mechanical properties, particularly brittleness. This study focuses on the identification of suitable functional groups that are capable of introducing enhanced impact strength into the vinyl ester network, for example, cyclic structures or urethane groups. A new pathway for the synthesis of vinyl esters carrying these groups was established and resulting monomers were tested regarding their photoreactivity and cytotoxicity. Mechanical properties and degradation behavior of the new materials were investigated as well. In addition, the thiol‐ene reaction was utilized to enhance photoreactivity and tune hydrolytical degradation. The new vinyl esters exhibit excellent biocompatibility and good photoreactivity that can be significantly enhanced with thiols on to the level of highly photoreactive acrylates. Ultimately, the impact strength was improved by a factor of more than ten compared to commercial vinyl esters. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1987–1997     

Fabrication and characterization of biodegradable polymer scaffolds adapting microfibrillar composite concept

In this work, we report on a technique for manufacturing of polymer scaffolds free from contact with toxic solvents. The method is adapted from the modified microfibrillar reinforced composites (MFC) concept. The objects of the investigation were biodegradable poly (l ‐lactide) (PLLA) and biocompatible poly (ethylene‐vinyl alcohol copolymer) (EVAL). The polymers were melt blended and thereafter cold drawn, so that both of the components were converted in fibrillar state. After selective dissolving of the EVAL from the drawn bristles with mixture of propanol and water, the individual PLLA fibrils were isolated. By means of freeze‐drying, ultrafine fibrous scaffolds were obtained. All materials under investigation were characterized by X‐ray diffraction, differential scanning calorimeter, Fourier transform infrared spectrometry, scanning electron microscopy, and atomic force microscopy analysis. The experimental results provide evidence for the changes of the supra molecular organization of the blend partners during MFC manufacturing process, for the nanostructure and microstructure of the PLLA fibrils as well as for the three‐dimensional architecture of the scaffolds. The in vitro studies show that the incubated in the presence of PLLA fibrils media does not reduce the cell viability and proliferative activity of the cultured cells. This kind of multiscale scaffolds might emulate the morphology of the natural extracellular matrix and represent an appropriate material for medical application. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1298–1310     

Dendritic macromers for hydrogel formation: Tailored materials for ophthalmic,orthopedic, and biotech applications

Dendritic macromolecules are well‐defined highly branched macromolecules synthesized via a divergent or convergent approach. A salient feature of the macromolecules described herein, and a goal of our research effort, is to prepare dendritic macromolecules suitable for in vitro and in vivo use by focusing on biocompatible building blocks and biodegradable linkages. These dendritic macromolecules can be subsequently crosslinked to form hydrogels using a photochemical acrylate‐based or a chemical ligation strategy. The properties—mechanical, swelling, degradation, and so forth—of the hydrogels can be tuned by altering the composition, crosslinking chemistry, wt %, generation number and so forth. The utility and diverse applicability is demonstrated through successful use of these hydrogels in three unique applications: hydrogel adhesives for repairing corneal wounds, hydrogel scaffolds for cartilage tissue engineering, and hydrogel reaction chambers for high throughput screening of molecular recognition events. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 383–400, 2008.     

Synthesis of poly(ester‐amide) dendrimers based on 2,2‐Bis(hydroxymethyl) propanoic acid and glycine

Water‐soluble, biodegradable, and biocompatible poly(ester‐amide) dendrimers with hydroxyl functional groups are synthesized from previously prepared AB₂ adduct of 2,2‐bis(hydroxymethyl) propanoic acid (bis‐MPA) and glycine as a repeating unit. Two esterification procedures using different coupling reagent/catalyst systems (DCC/DPTS or EDC/DMAP) are studied with respect to efficiency, ease of products purification, and quality of the final products. Both procedures have their own benefits and drawbacks, depending on dendrimer generation. The synthesized poly(ester‐amide) dendrimers as well as commercially available bis‐MPA dendrimers, poly(ester‐amide) hyperbranched polymer, and poly(vinyl alcohol) are used for preparation of solid dispersions of sulfonylurea antidiabetic drug glimepiride to improve its poor water‐solubility. In vitro dissolution studies show in comparison with pure glimepiride in crystalline or amorphous form, to the same extent improved glimepiride solubility for solid dispersions based on dendritic polymers, but not for poly(vinyl alcohol). The amount of glimepiride complexed with both dendrimer types increases with dendrimer generation. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3292–3301     

Properties of acyl modified poly(glycerol‐adipate) comb‐like polymers and their self‐assembly into nanoparticles

There is an increasing need to develop bio‐compatible polymers with an increased range of different physicochemical properties. Poly(glycerol‐adipate) (PGA) is a biocompatible, biodegradable amphiphilic polyester routinely produced from divinyl adipate and unprotected glycerol by an enzymatic route, bearing a hydroxyl group that can be further functionalized. Polymers with an average Mn of ～13 kDa can be synthesized without any post‐polymerization deprotection reactions. Acylated polymers with fatty acid chain length of C₄, C₈, and C₁₈ (PGAB, PGAO, and PGAS, respectively) at different degrees of substitution were prepared. These modifications yield comb‐like polymers that modulate the amphiphilic characteristics of PGA. This novel class of biocompatible polymers has been characterized through various techniques such as FT‐IR, ¹H NMR, surface, thermal analysis, and their ability to self‐assemble into colloidal structures was evaluated by using DLS. The highly tunable properties of PGA reported herein demonstrate a biodegradable polymer platform, ideal for engineering solid dispersions, nanoemulsions, or nanoparticles for healthcare applications. © 2016 The Authors. Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3267–3278     

Exploring thiol‐yne based monomers as low cytotoxic building blocks for radical photopolymerization

The last decade has seen a remarkable interest in the development of biocompatible monomers for the realization of patient specific medical devices by means of UV‐based additive manufacturing technologies. This contribution deals with the synthesis and investigation of novel thiol‐yne based monomers with a focus on their biocompatibility and also the mechanical properties in their cured state. It could be successfully shown that propargyl and but‐1‐yne‐4‐yl ether derivatives have a significant lower cytotoxicity than the corresponding (meth)acrylates with similar backbones. Together with appropriate thiol monomers, these compounds show reactivities in the range of (meth)acrylates and almost quantitative triple bond conversions. A particular highlight is the investigation of the network properties of photo cured alkynyl ether/thiol resins by means of low field solid state nuclear magnetic resonance spectroscopy. Additionally, dynamic mechanical analysis of those polymers revealed that monomers containing rigid backbones lead to moduli and glass transition temperatures (T_g's), sufficiently high for the fabrication of medical devices by UV based additive manufacturing methods. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3484–3494     

A facile synthetic strategy for hyperbranched polymer via combining free radical telomerization and polycondensation

A facile strategy combining free radical telomerization and polycondensation to prepare hyperbranched polymers was developed. By selecting a suitable telogen and a vinyl monomer, the product obtained by telomerization could be regarded as an AB_n type monomer for preparing a hyperbranched polymer via conventional polycondensation. The principles for selecting vinyl monomers and telogens were proposed. The feed ratio of vinyl monomer to telogen was discussed in the theory. For demonstrating the strategy, methyl (meth)acrylate (MA or MMA) and 2‐mercaptoethanol were used as a vinyl monomer and a telogen, respectively. The two‐unit adduct of MA or MMA obtained after purifying was regarded as a model ABB′ monomer. The sequential transesterification demonstrated that the carboxylate group at the terminal unit has higher reactivity than that at penultimate unit because of the different substituents at the respective α‐positions, resulting in lower degree of branching (DB) of obtained polymer. As substitutes, 2‐hydroxyethyl (meth)acrylate and thioglycolic acid were used as a vinyl monomer and a telogen, respectively. The results showed that the hyperbranched polymer obtained by using pseudo one‐pot approach had moderate DB. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7543–7555, 2008     

Radical copolymerization of 2‐trifluoromethylacrylic monomers. II. Kinetics,monomer reactivities,and penultimate effect in their copolymerization with norbornenes and vinyl ethers

Radical copolymerizations of electron‐deficient 2‐trifluoromethylacrylic (TFMA) monomers, such as 2‐trifluoromethylacrylic acid and t‐butyl 2‐trifluoromethylacrylate (TBTFMA), with electron‐rich norbornene derivatives and vinyl ethers with 2,2′‐azobisisobutyronitrile as the initiator were investigated in detail through the analysis of the kinetics in situ with ¹H NMR and through the determination of the monomer reactivity ratios. The norbornene derivatives used in this study included bicyclo[2.2.1]hept‐2‐ene (norbornene) and 5‐(2‐trifluoromethyl‐1,1,1‐trifluoro‐2‐hydroxylpropyl)‐2‐norbornene. The vinyl ether monomers were ethyl vinyl ether, t‐butyl vinyl ether, and 3,4‐dihydro‐2‐H‐pyran. Vinylene carbonate was found to copolymerize with TBTFMA. Although none of the monomers underwent radical homopolymerization under normal conditions, they copolymerized readily, producing a copolymer containing 60–70 mol % TFMA. The copolymerization of the TFMA monomer with norbornenes and vinyl ethers deviated from the terminal model and could be described by the penultimate model. The copolymers of TFMA reported in this article were evaluated as chemical amplification resist polymers for the emerging field of 157‐nm lithography. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1478–1505, 2004     

Melt polycondensation approach for reduction degradable helical polyester based on l‐cystine

Melt polycondensation approach is developed for new classes of reduction responsive disulfide containing functional polyesters based on l ‐cystine amino acid resources under solvent free process. l ‐Cystine was converted into multi‐functional ester‐urethane monomer and subjected to thermoselective transesterification at 120 °C with commercial diols in the presence of Ti(OBu)₄ to produce polyesters with urethane side chains. The polymers were produced in moderate to high molecular weights and the polymers were found to be thermally stable up to 250 °C. The β‐sheet hydrogen bonding interaction among the side chain urethane unit facilitated the self‐assembly of the polyester into amyloid‐like fibrils. The deprotection of urethane unit into amine functionality modified the polymers into water soluble cationic polyester spherical nanoparticles. The reduction degradation of disulfide bond was studied using DTT as a reducing agent and the high molecular weight polymers chains were found be chopped into low molecular weight oligomers. The cytotoxicity of cationic disulfide nanoparticle was studied in MCF‐7 cells and they were found to be biocompatible and non‐toxic to cells upto 50 μg/mL. The custom designed reduction degradable and highly biocompatible disulfide polyesters from l ‐cystine are useful for futuristic biomedical applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2864–2875     

Biodegradable stereocomplex materials of polylactide‐grafted dextran exhibiting soft and tough properties in dry and wet states

Water‐swellable biodegradable materials exhibiting mechanically tenacious and tough characters in the wet state were prepared by a simple blend of two enantiomeric polylactide‐grafted dextran copolymers (Dex‐g‐PLLA and Dex‐g‐PDLA). DSC and WAXD analyses demonstrated the formation of SC crystals in the copolymer blend films. SC blend films showed lamellar‐type microphase‐separated structures. When swollen with water, these blend films showed the same level of tensile strengths and Young's modulus as the films in the dry state. SC blend films degraded gradually over a month under physiological conditions with a degradation rate faster than the corresponding Dex‐g‐PLLA films. The SC‐forming enantiomeric mixture of polylactide‐grafted polysaccharides should be a good candidate for an implantable biocompatible material exhibiting favorable mechanical properties and degradation behavior. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of biocompatible and biodegradable block copolymers of polyvinyl alcohol‐block‐poly(ε‐caprolactone) using metal‐free living cationic polymerization

Applications of metal‐free living cationic polymerization of vinyl ethers using HCl · Et₂O are reported. Product of poly(vinyl ether)s possessing functional end groups such as hydroxyethyl groups with predicted molecular weights was used as a macroinitiator in activated monomer cationic polymerization of ε‐caprolactone (CL) with HCl · Et₂O as a ring‐opening polymerization. This combination method is a metal‐free polymerization using HCl · Et₂O. The formation of poly(isobutyl vinyl ether)‐b‐poly(ε‐caprolactone) (PIBVE‐b‐PCL) and poly(tert‐butyl vinyl ether)‐b‐poly(ε‐caprolactone) (PTBVE‐b‐PCL) from two vinyl ethers and CL was successful. Therefore, we synthesized novel amphiphilic, biocompatible, and biodegradable block copolymers comprised polyvinyl alcohol and PCL, namely PVA‐b‐PCL by transformation of acid hydrolysis of tert‐butoxy moiety of PTBVE in PTBVE‐b‐PCL. The synthesized copolymers showed well‐defined structure and narrow molecular weight distribution. The structure of resulting block copolymers was confirmed by ¹H NMR, size exclusion chromatography, and differential scanning calorimetry. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5169–5179, 2009     

Molecular design of outermost surface functionalized thermoresponsive polymeric micelles with biodegradable cores

We prepared well‐defined diblock copolymers of thermoresponsive poly(N‐isopropylacrylamide‐co‐N,N‐dimethylacrylamide) blocks and biodegradable poly(D ,L ‐lactide) blocks by combination of reversible addition‐fragmentation chain transfer radical (RAFT) polymerization and ring‐opening polymerization. α‐Hydroxyl, ω‐dithiobenzoate thermoresponsive polymers were synthesized by RAFT polymerization using hydroxyl RAFT agents. Biodegradable blocks were prepared by ring‐opening polymerization of D ,L ‐lactide initiated by α‐hydroxyl groups of thermoresponsive polymers, which inhibit the thermal decomposition of ω‐dithioester groups. Terminal dithiobenzoate (DTBz) groups of thermoresponsive blocks were easily reduced to thiol groups and reacted with maleimide (Mal). In aqueous media, diblock copolymer products formed surface‐functionalized thermoresponsive micelles. These polymeric micelles had a low critical micelle concentration of 22 μg/L. In thermoresponsive studies of the micelles, hydrophobic DTBz‐surface micelles demonstrated a significant shift in lower critical solution temperature (LCST) to a lower temperature of 30.7 °C than that for Mal‐surface micelles (40.0 °C). In addition, micellar LCST was controlled by changing bulk mixture ratios of respective heterogeneous end‐functional diblock copolymers. Micellar disruption at acidic condition (pH 5.0) was completed within 5 days due to hydrolytic degradation of PLA cores, regardless of showing a slow disruption rate at physiological condition. Furthermore, we successfully improved water‐solubility of hydrophobic drug, paclitaxel by incorporating into the micellar cores. © Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7127–7137, 2008     

Oxime functionalization strategy for iodinated poly(epsilon‐caprolactone) X‐ray opaque materials

Since two of the most common technologies for imaging the human body are X‐ray radiography and computed tomography (CT), researchers are focused on developing biodegradable and biocompatible polymeric molecules as an alternative to the traditional small molecule contrast agents. This report highlights the synthesis of novel biodegradable iodinated poly(ε‐caprolactone) copolymers by oxime “Click” ligation reactions. A series of ketone‐bearing materials are built by tin (II)‐mediated ring‐opening polymerization followed by a postpolymerization deprotection step. The intended X‐ray opacity is imparted through acid‐catalyzed oxime postpolymerization modification of the resultant polymers with an iodinated hydroxylamine. All small molecules and polymeric materials are characterized using proton nuclear magnetic resonance (NMR) for purity, functional group stoichiometry, and number‐averaged molecular weight calculations. Additionally, the polymers are evaluated with gel permeation chromatography (GPC) to determine polymer sample polydispersity and general molecular weight distribution shapes and by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) for thermal properties. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2421–2430     

Fibers and 3D mesh scaffolds from biodegradable starch-based blends: production and characterization

The aim of this work is the production of fibers from biodegradable polymers to obtain 3D scaffolds for tissue engineering of hard tissues. The scaffolds required for this highly demanding application need to have, as well as the biological and mechanical characteristics, a high degree of porosity with suitable dimensions for cell seeding and proliferation. Furthermore, the open cell porosity should have adequate interconnectivity for a continuous flow of nutrients and outflow of cell metabolic residues as well as to allow cell growth into confluent layers. Blends of corn starch, a natural biodegradable polymer, with other synthetic polymers (poly(ethylene vinyl alcohol), poly(epsilon-caprolactone), poly(lactic acid)) were selected for this work because of their good balance of properties, namely biocompatibility, processability and mechanical properties. Melt spinning was used to produce fibers from all the blends and 3D meshes from one of the starch-poly(lactic acid) blends. The experimental characterization included the evaluation of the tensile mechanical properties and thermal properties of the fibers and the compression stiffness, porosity and degradation behavior of the 3D meshes. Light microscopy picture of 3D meshes.