In situ‐generated Ru(III)‐mediated ATRP from the polymeric Ru(III) complex in the absence of activator generation agents

Past research has examined the atom transfer radical polymerization (ATRP) with high oxidation state metal complexes and without the need for any additives such as reducing agent or free radical initiator. To extend this research, half‐metallocene ruthenium(III) (Ru(III)) catalysts were used for the polymerization of methyl methacrylate (MMA) for the first time. These catalysts were generated in situ simply by mixing phosphorus‐containing ligand and pentamethylcyclopentadienyl (Cp*) Ru(III) polymer ((Cp*RuCl₂)_n). The complexes in their higher oxidation state such as Cp*RuCl₂(PPh₃) were air‐stable, highly active, and removable catalysts for the ATRPs of MMA with both precision control of molecular weight and narrow polydispersity index. The addition of ppm amount of metal catalyst contributed to the formation of very well‐defined homopolymers and copolymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of star‐shaped copolymers with methyl methacrylate and n‐butyl methacrylate by metal‐catalyzed living radical polymerization: Block and random copolymer arms and microgel cores

Various star‐shaped copolymers of methyl methacrylate (MMA) and n‐butyl methacrylate (nBMA) were synthesized in one pot with RuCl₂(PPh₃)₃‐catalyzed living radical polymerization and subsequent polymer linking reactions with divinyl compounds. Sequential living radical polymerization of nBMA and MMA in that order and vice versa, followed by linking reactions of the living block copolymers with appropriate divinyl compounds, afforded star block copolymers consisting of AB‐ or BA‐type block copolymer arms with controlled lengths and comonomer compositions in high yields (≥90%). The lengths and compositions of each unit varied with the amount of each monomer feed. Star copolymers with random copolymer arms were prepared by the living radical random copolymerization of MMA and nBMA followed by linking reactions. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 633–641, 2002; DOI 10.1002/pola.10145     

Ring‐opening polymerization of ϵ‐caprolactone initiated with different ruthenium derivatives: Kinetics and mechanism studies

End‐functionalized polyesters have been synthesized by ring‐opening polymerization (ROP) of ?‐caprolactone (CL) initiated with five different ruthenium derivatives in the presence of a series of alcohols as transfer agents. Mechanistic studies were performed for ROP of CL with RuCl₂(PPh₃)₃ ( I ), TpRuCl(PPh₃)₂ ( II ), and TpRuCl(PHPh₂)(PPh₃) ( III ) as catalysts in the presence or absence of benzyl alcohol (BzOH). Obtained molecular weights are proportional to CL/BzOH ratio, but there is not a direct relationship with CL/ruthenium complex ratios. ¹H and ¹³C NMR spectroscopy revealed the existence of benzyl ester end‐groups. Catalysis involves (a) dissociation of ruthenium complexes, (b) coordination of the lactone CL, (c) coordination of the BzOH with the formation of a metal alkoxide, (d) transfer from the alkoxyl ligand to the coordinated lactone, and (e) ring‐opening of CL by oxygen‐acyl bond cleavage. The proposed mechanism is supported by ¹H, ¹³C, and ³¹P NMR, gel permeation chromatography (GPC), and MALDI‐TOF analysis of the polymers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6926–6942, 2006     

Synthesis,Structures, and Reactivities of Pincer‐Type Ruthenium Complexes Bearing Two Proton‐Responsive Pyrazole Arms

A new metal–ligand bifunctional, pincer‐type ruthenium complex [RuCl( L1‐H2 )(PPh₃)₂]Cl ( 1 ; L1‐H2 =2,6‐bis(5‐tert‐butyl‐1H‐pyrazol‐3‐yl)pyridine) featuring two proton‐delivering pyrazole arms has been synthesized. Complex 1 , derived from [RuCl₂(PPh₃)₃] with L1‐H2 , underwent reversible deprotonation with potassium carbonate to afford the pyrazolato–pyrazole complex [RuCl(L1‐H)(PPh₃)₂] ( 2 ). Further deprotonation of 1 and 2 with potassium hexamethyldisilazide in methanol resulted in the formation of the bis(pyrazolato) complex [Ru(L1)(MeOH)(PPh₃)₂] ( 3 ). Complex 3 smoothly reacted with dioxygen and dinitrogen to give the side‐on peroxo complex [Ru(L1)(O₂)(PPh₃)₂] ( 4 ) and end‐on dinitrogen complex [Ru(L1)(N₂)(PPh₃)₂] ( 5 ), respectively. On the other hand, the reaction of [RuCl₂(PPh₃)₃] with less hindered 2,6‐di(1H‐pyrazol‐3‐yl)pyridine ( L3‐H2 ) led to the formation of the dinuclear complex [{RuCl₂(PPh₃)₂}₂(μ₂‐ L3‐H2 )₂] ( 6 ), in which the pyrazole‐based ligand adopted a tautomeric form different from L1‐H2 in 1 and the central pyridine remained uncoordinated. The detailed structures of 1 , 2 , 3 , 3.MeOH , 4 , 5 , 6 were determined by X‐ray crystallography.     

Thermoregulated phase‐transfer catalysis via PEG‐armed Ru(II)‐bearing microgel core star polymers: Efficient and reusable Ru(II) catalysts for aqueous transfer hydrogenation of ketones

Thermoregulated phase‐transfer catalysis for the transfer hydrogenation of 2‐octanone in 2‐propanol/H₂O biphasic media was achieved with ruthenium‐bearing microgel‐core star polymers with amphiphilic, thermosensitive poly(ethylene glycol) (PEG) arms [Ru(II)‐PEG star], which were directly prepared by the ruthenium‐catalyzed living radical polymerization in conjunction with a phosphine ligand‐carrying styrene derivative. The star polymers were first placed in the aqueous (lower) layer at room temperature and immediately moved into the organic (upper) layer at 100 °C, and once again, moved down to the aqueous layer (lower) upon cooling the solution to room temperature. The Ru(II)‐PEG star catalyst was clearly superior to the original Ru(II) catalyst and related non‐microgel catalysts [Ru(II)‐PEG block] in terms of activity and recovery/recycle, due to the unique designer structure of the microgel‐core star polymers. Other substrates (less hydrophobic alkyl ketones and aromatic ketone) were also efficiently hydrogenated into the corresponding sec‐alcohols with the star catalyst in aqueous media. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 373–379, 2010     

Star poly(methyl methacrylate) with end‐functionalized arm chains by ruthenium‐catalyzed living radical polymerization

Star polymers with end‐functionalized arm chains (surface‐functionalized star polymers) were synthesized by the in situ linking reaction between ethylene glycol dimethacrylate (linking agent) and an α‐end‐functionalized linear living poly(methyl methacrylate) in RuCl₂(PPh₃)₃‐catalyzed living radical polymerization; the terminal on the surface functionalities included amides, alcohols, amines, and esters. The star polymers were obtained in high yields (75–90%) with initiating systems consisting of a functionalized 2‐chloro‐2‐phenylacetate or ‐acetamide [F? C(O)CHPhCl; F = nPrNH? , HOCH₂CH₂O? , Me₂NCH₂CH₂O? , or EtO? ; initiator] and n‐Bu₃N (additive). The yield was lower with a functionalized 2‐bromoisobutyrate [Me₂NCH₂CH₂OC(O)CMe₂Br] initiator or with Al(Oi‐Pr)₃ as an additive. Multi‐angle laser light scattering analysis showed that the star polymers had arm numbers of 10–100, radii of gyration of 6–23 nm, and weight‐average molecular weights of 1.3 × 10⁵ to 3.0 × 10⁶, which could be controlled by the molar ratio of the linking agent to the linear living polymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1972–1982, 2002     

Simultaneous control of the stereospecificity and molecular weight in the ruthenium‐catalyzed living radical polymerization of methyl and 2‐hydroxyethyl methacrylates and sequential synthesis of stereoblock polymers

The stereospecific living radical polymerizations of methyl methacrylate (MMA) and 2‐hydroxyethyl methacrylate (HEMA) were achieved with a combination of ruthenium‐catalyzed living radical and solvent‐mediated stereospecific radical polymerizations. Among a series of ruthenium complexes [RuCl₂(PPh₃)₃, Ru(Ind)Cl(PPh₃)₂, and RuCp*Cl(PPh₃)₂], Cp*–ruthenium afforded poly(methyl methacrylate) with highly controlled molecular weights [weight‐average molecular weight/number‐average molecular weight (M_w/M_n) = 1.08] and high syndiotacticity (r = 88%) in a fluoroalcohol such as (CF₃)₂C(Ph)OH at 0 °C. On the other hand, a hydroxy‐functionalized monomer, HEMA, was polymerized with RuCp*Cl(PPh₃)₂ in N,N‐dimethylformamide and N,N‐dimethylacetamide (DMA) to give syndiotactic polymers (r = 87–88%) with controlled molecular weights (M_w/M_n = 1.12–1.16). This was the first example of the syndiospecific living radical polymerization of HEMA. A fluoroalcohol [(CF₃)₂C(Ph)OH], which induced the syndiospecific radical polymerization of MMA, reduced the syndiospecificity in the HEMA polymerization to result in more or less atactic polymers (mm/mr/rr = 7.2/40.9/51.9%) with controlled molecular weights in the presence of RuCp*Cl(PPh₃)₂ at 80 °C. A successive living radical polymerization of HEMA in two solvents, first DMA followed by (CF₃)₂C(Ph)OH, resulted in stereoblock poly(2‐hydroxyethyl methacrylate) with syndiotactic–atactic segments. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3609–3615, 2006     

Low‐Valent Ruthenium Induced Simultaneous Reduction of Nitro Group and C‐C Double Bond in Nitroolefin 1‐Phenyl‐2‐Nitropropene‐1

The reduction of 1‐phenyl‐2‐nitropropene‐1 ( 1 ) on using ruthenium complexes was studied in detail in order to correlate this method with those previously recorded in the literature for the hydrogenation of nitroolefins. A variety of products was isolated by varying the reaction temperature and solvent. Among them was 1‐phenyl‐2‐propylamine ( 4 ), completely reduced from the selective both double bond and nitro group. 1‐Phenyl‐2‐propanol ( 5 ) was observed due to reduction of phenylacetone at 125 °C in the presence of ruthenium catalyst. When reaction temperature was lower than 125 °C, by employing RuCl₂(PPh₃)₃ complex, 1‐phenyl‐2‐nitropropane ( 2 ) and phenylacetone ( 3 ) were obtained, respectively. Ru‐BINAP complexes were attempted to produce chiral amine from starting material 1‐phenyl‐2‐nitropropene‐1 ( 1 ).     

Spectrometric,catalytic, and antimicrobial studies of mononuclear Ru(III) Schiff-base complexes

A series of air stable low spin Ru(III) complexes, [RuX₂(EPh₃)(L)] (where X = Cl or Br; E = P or As; L = monobasic tridentate Schiff-base ligand), have been synthesized by reacting [RuCl₃(PPh₃)₃], [RuCl₃(AsPh₃)₃], and [RuBr₃(PPh₃)₃] with the Schiff base in 1 : 1 molar ratio in benzene. These complexes have been characterized by elemental analysis, FT-IR, UV-Vis, and EPR spectroscopy together with magnetic susceptibility. The redox behaviors of the complexes have been investigated by cyclic voltammetric technique. Catalytic efficiency of the ruthenium complexes was determined for aryl–aryl coupling and the oxidation of primary and secondary alcohols into their corresponding aldehydes and ketones in the presence of molecular oxygen as co-oxidant. All complexes were screened for antibacterial activity.     

Ruthenium and enzyme-catalyzed dynamic kinetic resolution of alcohols

Ruthenium acts as a good catalyst for the racemization reaction of secondary alcohols and amines. Ruthenium-catalyzed racemization is coupled with enzymatic kinetic resolution to prepare chiral compounds in 100% theoretical yield. Ten ruthenium complexes (1–10) act as a good catalyst the for racemization reaction and are also compatible with DKR process. Two other ruthenium complexes [RuCl₂(PPh₃)₃] and [Cp^*RuCl(COD)] are active for racemization reaction but their successful compatibility with DKR has not yet been reported. Ru/γ-Al₂O₃ and Ru–HAP are the heterogeneous catalysts used for the racemization reaction. They have also not been employed for DKR process. Polymer supported ruthenium is employed as a reusable racemization catalyst for aerobic DKR of alcohols.     

Synthesis,characterization, and metal complexes of polyacetylenes with pendant 2,2′‐bipyridyl groups

5‐Ethynyl‐2,2′‐bipyridine ( 1 ; bpyC≡CH) polymerized in the presence of catalytic amounts of [RhF(COD)(PPh₃)] or [Rh(μ‐OH)(COD)]₂ (COD = 1,5‐cyclooctadiene) in 74–91% yields. In contrast, [Rh(μ‐X)(NBD)]₂ (X = Cl or OMe; NBD = norbornadiene) did not catalyze the polymerization of 1 or gave low yields of the polymer. The obtained polymer, poly(5‐ethynyl‐2,2′‐bipyridine) [ 2 ; (bpyC?CH)_n], was highly stereoregular with a predominant cis–transoidal geometry. Random copolyacetylenes containing the 2,2′‐bipyridyl group with improved solubility in organic solvents were obtained by the treatment of a mixture of 1 and phenylacetylene ( 3 ) or 1‐ethynyl‐4‐n‐pentyl‐benzene with catalytic amounts of [RhF(COD)(PPh₃)]. A block copolymer of 1 and 3 was prepared by the addition of 1 to a poly(phenylacetylene) containing a living end. The reaction of 2 with [Mo(CO)₆] produced an insoluble polymer containing [Mo(CO)₄(bpy)] groups, whereas with [RuCl₂(bpy)₂] or [Ru(bpy)₂(CH₃COCH₃)₂](CF₃SO₃)₂, it gave soluble metal–polymer complexes containing [Ru(bpy)₃]²⁺ groups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43:3167–3177, 2005     

Synthesis of silylene–propenylene oligomers via catalytic polycondensation of diallyldiorganosilanes

Acyclic diene polycondensation (ADP) of diallyldiorganosilanes (CH₂CHCH₂)₂SiR₂ (where R = Me, Ph), in the presence of various ruthenium and rhodium complexes, led predominantly to linear silylene–propenylene oligomers. Ruthenium catalysts (e.g. RuCl₂(PPh₃)₃, RuHCl(CO)(PPh₃)₃, and RuCl(SiMe₃)(CO)(PPh₃)₂) were found to be more efficient than the rhodium ones. The reaction proceeds via preliminary catalytic isomerization of allylsilane to silyl-1-propenes followed by their oligococondensation. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3299–3304, 1997     

Synthesis of 2‐aminomethylpiperidine ruthenium(II) phosphine complexes and their applications in transfer hydrogenation of aryl ketones

The complex trans,cis‐[RuCl₂(PPh₃)₂(ampi)] (2) was prepared by reaction of RuCl₂(PPh₃)₃ with 2‐aminomethylpiperidine(ampi) (1). [RuCl₂(PPh₂(CH₂)_nPPh₂)(ampi) (n = 3, 4, 5)] (3–5) were synthesized by displacement of two PPh₃ with chelating phosphine ligands. All complexes (2–5) were characterized by ¹ H, ¹³C, ³¹P NMR, IR and UV‐visible spectroscopy and elemental analysis. They were found to be efficient catalysts for transfer hydrogen reactions. Copyright © 2012 John Wiley & Sons, Ltd.     

Kinetics and mechanism of RuCl2PPh3)3-catalyzed oxidation of sulfides by N-methylmorpholine N-oxide

Oxidation of dibutylsulfide, diphenylsulfide, methylphenylsulfide and dibenzylsulfide to the corresponding sulfoxides by N-methylmorpholine N-oxide (NMO) catalyzed by RuCl₂(PPh₃)₃ in DMF solvent is reported. The reaction is first order in both catalyst and N-oxide. The order with respect to the substrate is variable, being zero at higher concentrations and fractional at lower concentrations. The order of reactivity observed for the substrates is as follows: dibutylsulfide ≈ dibenzylsulfide > methylphenylsulfide > diphenylsulfide. RuCl₂(PPh₃)₃ oxidizes olefins to form epoxides at a slower rate. The order of reactivity observed for the two types of substrates parallels their nucleophilicity (sulfides > alkenes).Spectral studies indicate 1:1 complex formation between RuCl₂(PPh₃)₃ and the sulfides. The active oxidant is the Ru(IV)oxo complex formed by the oxidation of Ru(II) by NMO.     

The kinetics and mechanism of homogeneous hydrogen transfer from alcohols to benzylideneacetone catalyzed by dichlorotris(triphenylphosphine)ruthenium(II)

Dichlorotris(triphenylphosphine)ruthenium(II) catalyzes the hydrogen transfer from alcohols to olefins. Kinetic studies were carried out at 170–190°C using the ruthenium(II) complex as homogeneous catalyst, benzyl alcohol, diphenylcarbinol, methylphenylcarbinol and benzoin as the hydrogen donors, benzylideneacetone as the hydrogen acceptor, and dibenzyl ether as a solvent. The IR spectra and GLC were used to monitor the reaction and the isotope effects were determined in order to elucidate the role of the catalyst and the mechanism of hydrogen transfer. In the reaction mixture RuCl₂(PPh₃)₃ is converted by the alcohols into RuH₂(CO) (PPh₃)₃, which then hydrogenates benzylideneacetone. The kinetic data are compatible with the expression. reaction rate = k_obs[Ru][olefin][alcohol] The rate-determining step of this reaction is considered to be the transfer of hydrogen from the alcohol to a ruthenium species.     

The ruthenium pyrazolonate complex Ru(PMIP)2(PPh3)2: Synthesis, structure, and some properties

The new ruthenium(II) complex Ru(PMIP)₂(PPh₃)₂ (HPMIP is 4-isobutyryl-3-methyl-1-phe-nylpyrazol-5-one) was obtained from RuCl₂(PPh₃)₃ and Na(PMIP)(DME) (DME is dimethoxyethane). The structures of the complex obtained and the starting sodium pyrazolonate were determined by X-ray diffraction. The ruthenium pyrazolonate complex initiates metathetical norbornene polymerization producing high-molecular-weight polynorbornene in low yield.     

Metal-complex-bearing star polymers by metal-catalyzed living radical polymerization: Synthesis and characterization of poly(methyl methacrylate) star polymers with Ru(II)-embedded microgel cores

One-pot, spontaneous, and in-situ incorporation of Ru(II) complexes into a microgel (solubilized nanometer-scale network) has been achieved in near quantitative efficiency by a polymer-linking reaction of linear living poly(methyl methacrylate) (PMMA) with a bifunctional methacrylate (ethylene glycol dimethacrylate or bisphenol A dimethacrylate; linking agent) and a phosphine-ligand monomer [diphenyl-4-styryl-phosphine ( 3 ); i.e., CH₂CH C₆H₄ p-PPh₂] in the RuCl₂(PPh₃)₃-catalyzed living radical polymerization. The products were Ru-bearing. PMMA-armed star polymers with a microgel-core that consisted of a copolymer network of the linking agent and 3 . Upon the network formation, the phosphine ligands efficiently encapsulated RuCl₂(PPh₃)₃, thus achieving a polymer catalyst directly from a polymerization catalyst. Colored dark brown-red, the star polymers exhibited UV-vis absorptions originating from the entrapped complex (3.1–7.4 × 10⁻⁵ mol Ru/g of polymer), the incorporation efficiency being close to 100% with respect to the original polymerization-catalyst. Detailed spectroscopic characterization showed the following: an absolute molecular weight of 1.7 × 10⁵ to 1.7 × 10⁶, an arm number of 11–92 arms/polymer, and a radius of gyration of 8–19 nm (in DMF). Direct observation of the individual star molecules in solid state was achieved by transmission electron microscopy (unstained; 2–3 nm dark dots for the core) and atomic force microscopy (semi-circular images). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4966–4980, 2006     

Me‐BIPAM for the Synthesis of Optically Active 3‐Aryl‐3‐hydroxy‐2‐oxindoles by Ruthenium‐catalyzed Addition of Arylboronic Acids to Isatins

A chiral O‐linked C₂‐symmetric bidentate phosphoramidite (Me‐BIPAM) was found to be efficient for the ruthenium‐catalyzed addition of arylboronic acids to isatins. Asymmetric synthesis of 3‐aryl‐3‐hydroxy‐2‐oxindoles by 1,2‐addition of arylboronic acids to isatins was carried out in the presence of [RuCl₂(PPh₃)₃]/(R,R)‐Me‐BIPAM and KF, resulting in an enantioselectivity as high as 90 % ee. It was found that the reaction with N‐protected isatins proceeds with high yields and good enantioselectivities. The best protective groups on the nitrogen atom were different depending on the substituents on the aromatic ring. The use of a N‐benzyl group resulted in excellent enantioselectivities in many substrates compared with other groups.     

Ruthenium(II) complexes of hybrid 8‐hydroxyquinoline–thiosemicarbazone ligands: synthesis,characterization and catalytic applications

A series of new hexa‐coordinated ruthenium(II) hydroxyquinoline–thiosemicarbazone complexes of the type [Ru(CO)(EPh₃)(B)(L)] (E = P or As; B = PPh₃, AsPh₃ or Py; L = hydroxyquinoline–thiosemicarbazone) were synthesized by reacting ruthenium precursor complexes [RuHCl(CO)(EPh₃)₂(B)] (E = P or As; B = PPh₃, AsPh₃ or Py) with hydroxyquinoline–thiosemicarbazone ligands in ethanol. The new complexes were characterized by analytical and spectroscopic (FT‐IR, UV–visible, NMR (¹H, ¹³C and ³¹P) and fast atom bombardment (FAB)–mass spectrometric methods. Based on the spectral results, an octahedral geometry was assigned for all the complexes. The new complexes showed good catalytic activity for the conversion of aldehydes to amides in the presence of hydroxylamine hydrochloride–sodium bicarbonate and for the oxidation of alkanes into their corresponding alcohols and ketones in the presence of m‐chloroperbenzoic acid. The complexes also catalyzed the N‐alkylation of benzylamine in the presence of KOtBu in alcohol medium. Copyright © 2013 John Wiley & Sons, Ltd.     

Ruthenium(II) complexes derived from 2‐phenylthiazoline‐4‐carboxylic acid: structure and catalytic activity for transfer hydrogenation reaction

Piano‐stool ([(p‐cymene)Ru(thz)Cl], 2 ) and six‐coordinated ([Ru(thz)₂(PPh₃)₂], 3 ) ruthenium complexes derived from 2‐phenylthiazoline‐4‐carboxylic acid (Hthz, 1 ) were synthesized for the first time, and fully characterized using conventional methods. Also, the molecular structure of complex 3 was determined using X‐ray analysis. These complexes were evaluated as catalysts for transfer hydrogenation of carbonyl compounds in the presence of isopropyl alcohol and KO^tBu. Complex 2 was found to be more active than 3 in transfer hydrogenation. Copyright © 2016 John Wiley & Sons, Ltd.