Chemically prepared well-ordered InP(0 0 1) surfaces

In the present work HCl-isopropanol treated and vacuum annealed InP(0 0 1) surfaces were studied by means of low-energy electron diffraction (LEED), soft X-ray photoemission (SXPS), and reflectance anisotropy (RAS) spectroscopies. The treatment removes the natural oxide and leaves on the surface a physisorbed overlayer containing InCl_x and phosphorus. Annealing at 230 °C induces desorption of InCl_x overlayer and reveals a P-rich (2 × 1) surface. Subsequent annealing at higher temperature induces In-rich (2 × 4) surface. The structural properties of chemically prepared InP(0 0 1) surfaces were found to be similar to those obtained by decapping of As/P-capped epitaxial layers.     

Anisotropy of second-order nonlinear optical susceptibilities of arsenic triiodide-sulfur addition complex: AsI3 · 3S8

We report the anisotropic linear and second-order nonlinear optical (NLO) properties of arsenic triiodide-octa-sulfur (1:3) adduct, AsI₃ · 3S₈, which spontaneously crystallizes in the trigonal rhombohedral non-centrosymmetric space group R3m. The trigonal symmetry of the AsI₃ · 3S₈ molecule coincides with the crystal symmetry. The crystals are optically uniaxial with n_o/n_e of about 1.2 and show dichroism at the UV-visible wavelengths. Second harmonic generation (SHG) tensor elements were determined from Maker fringes measured with an Nd:YAG laser (∼10 ns pulse, 1064 nm). The coefficient d_222,eff = 32.0 pm/V for the light polarized parallel to the layers of iodine and sulfur atoms in the AsI₃ · 3S₈ crystal ab plane is markedly larger than d₃₃₃ = 11.6 pm/V for the polarization of light parallel to the crystal c axis. The anisotropy parameter, defined as the d_222,eff/d₃₃₃ ratio, is about 2.7 for the AsI₃ · 3S₈ crystal, smaller than that for the isomorphous CHI₃ · 3S₈ crystal (7.3) but larger than for the SbI₃ · 3S₈ crystal (0.7). Highly anisotropic components of the first hyperpolarizability tensor of an AsI₃ · 3S₈ molecule, β, were derived from the quadratic nonlinear susceptibility tensor of the crystal.     

Segregation of Sn and Sb in a ternary Cu(1 0 0)SnSb alloy

Surface segregation studies of Sn and Sb in Cu(1 0 0)-0.14 at.% Sn-0.12 at.% Sb ternary alloy, have been done by making use of Auger Electron Spectroscopy. The method of Linear Temperature Ramp (LTR) was employed, whereby the sample was heated and cooled linearly at a constant rate. The positive heating rate showed both a kinetic segregation profile, as well as a narrow equilibrium segregation region, at higher temperatures. The equilibrium segregation profile was extended by cooling the sample. Sn was first to segregate to the surface due to its higher diffusion coefficient, mainly from a smaller activation energy E_Sn. Sb, due to its higher segregation energy, eventually replaced Sn from the surface. The modified Darken model was used to simulate the profile yielding the following segregation parameters: D_o(Sn) = 6.3 × 10⁻⁶ m²/s, D_o(Sb) = 2.8 × 10⁻⁵ m²/s; E_Sn = 175.4 kJ/mol, E_Sb = 186.3 kJ/mol; , ; Ω_Cu-Sn = 3.4 kJ/mol, Ω_Cu-Sb = 15.9 kJ/mol and Ω_Sn-Sb = −5.4 kJ/mol.     

1 × 4 coupler based on all solid five-core photonic crystal fibers

An improved 1 × 4 coupler based on all solid multi-core photonic crystal fiber is proposed and analyzed. The expressions to calculate the coupling length and the coupling efficiency are deduced based on the coupled-mode equations firstly. Then a full-vector finite element method (FEM) is used to calculate the coupling length and the coupling efficiency. Next, the propagation characteristics and the performances of the coupler are analyzed through using a full vector beam propagation method (BPM). Research shows that the results derived by FEM agree with that by BPM. The coupling length of the coupler is 4.1 mm at λ = 1.55 μm. A maximum coupling efficiency of 24.96% can be obtained. The coupling ratio is more than 22.5% over a wavelength range of 100 nm. The polarization-dependent loss at λ = 1.55 μm is equal to 0.73 dB. Finally, the influences of the micro-variation of structure parameters and the material refractive index on the working performances of the coupler are investigated.     

The dehydrogenation of CH4 on Rh(1 1 1), Rh(1 1 0) and Rh(1 0 0) surfaces: A density functional theory study

CH₄ dehydrogenation on Rh(1 1 1), Rh(1 1 0) and Rh(1 0 0) surfaces has been investigated by using density functional theory (DFT) slab calculations. On the basis of energy analysis, the preferred adsorption sites of CH_x (x = 0-4) and H species on Rh(1 1 1), Rh(1 1 0) and Rh(1 0 0) surfaces are located, respectively. Then, the stable co-adsorption configurations of CH_x (x = 0-3) and H are obtained. Further, the kinetic results of CH₄ dehydrogenation show that on Rh(1 1 1) and Rh(1 0 0) surfaces, CH is the most abundant species for CH₄ dissociation; on Rh(1 1 0) surface, CH₂ is the most abundant species, our results suggest that Rh catalyst can resist the carbon deposition in the CH₄ dehydrogenation. Finally, results of thermodynamic and kinetic show that CH₄ dehydrogenation on Rh(1 0 0) surface is the most preferable reaction pathway in comparison with that on Rh(1 1 1) and Rh(1 1 0) surfaces.     

Determination of the rate of H + O2 + M → HO2 + M (M = N2, Ar, H2O) from ignition of syngas at practical conditions

In H₂ and H₂/CO oxidation, the H + O₂ + M termination step is one of the most important reactions at elevated pressures. With the recent, increased interest in synthetic fuels, an accurate assessment of its rate coefficient becomes increasingly important, especially for real fuel/air mixtures. Ignition delay times in shock-tube experiments at the conditions selected in this study are only sensitive to the rates of the title reaction and the branching reaction H + O₂ = OH + O, the rate of which is known to a high level of accuracy. The rate coefficient of the title reaction for M = N₂, Ar, and H₂O was determined by adjusting its value in a detailed chemical kinetics model to match ignition delay times for H₂/CO/O₂/N₂, H₂/CO/O₂/Ar, and H₂/CO/O₂/N₂/H₂O mixtures with fuel/air equivalence ratios of ? = 0.5, 0.9, and 1.0. The rate of H + O₂ + N₂ = HO₂ + N₂ was measured to be 2.7 (−0.7/+0.8) × 10¹⁵ cm⁶/mol² s for T = 916-1265 K and P = 1-17 atm. The present determination agrees well with the recent study of Bates et al. [R.W. Bates, D.M. Golden, R.K. Hanson, C.T. Bowman, Phys. Chem. Chem. Phys. 3 (2001) 2337-2342], whose rate expressions are suggested herein for modeling the falloff regime. The rate of H + O₂ + Ar = HO₂ + Ar was measured to be 1.9 × 10¹⁵ cm⁶/mol² s for T = 932-965 K and P = 1.4 atm. The rate of H + O₂ + H₂O = HO₂ + H₂O was measured to be 3.3 × 10¹⁶ cm⁶/mol² s for T = 1071-1161 K and P = 1.3 atm. These are the first experimental measurements of the rates of the title reactions in practical combustion fuel/air mixtures.     

CO2 adsorption on Cr(1 1 0) and Cr2O3(0 0 0 1)/Cr(1 1 0)

We attempt to correlate qualitatively the surface structure with the chemical activity for a metal surface, Cr(1 1 0), and one of its surface oxides, Cr₂O₃(0 0 0 1)/Cr(1 1 0). The kinetics and dynamics of CO₂ adsorption have been studied by low energy electron diffraction (LEED), Aug er electron spectroscopy (AES), and thermal desorption spectroscopy (TDS), as well as adsorption probability measurements conducted for impact energies of E_i = 0.1-1.1 eV and adsorption temperatures of T_s = 92-135 K. The Cr(1 1 0) surface is characterized by a square shaped LEED pattern, contamination free Cr AES, and a single dominant TDS peak (binding energy E_d = 33.3 kJ/mol, first order pre-exponential 1 × 10¹³ s⁻¹). The oxide exhibits a hexagonal shaped LEED pattern, Cr AES with an additional O-line, and two TDS peaks (E_d = 39.5 and 30.5 kJ/mol). The initial adsorption probability, S₀, is independent of T_s for both systems and decreases exponentially from 0.69 to 0.22 for Cr(1 1 0) with increasing E_i, with S₀ smaller by ∼0.15 for the surface oxide. The coverage dependence of the adsorption probability, S(Θ), at low E_i is approx. independent of coverage (Kisliuk-shape) and increases initially at large E_i with coverage (adsorbate-assisted adsorption). CO₂ physisorbs on both systems and the adsorption is non-activated and precursor mediated. Monte Carlo simulations (MCS) have been used to parameterize the beam scattering data. The coverage dependence of E_d has been obtained by means of a Redhead analysis of the TDS curves.     

Characterization of crystal lattice constant and dislocation density of crack-free GaN films grown on Si(1 1 1)

GaN have sphalerite structure (Cubic-GaN) and wurtzite structure (hexagonal GaN). We report the H-GaN epilayer with a LT-AlN buffer layer has been grown on Si(1 1 1) substrate by metal-organic chemical vapor deposition (MOCVD). According to the FWHM values of 0.166° and 14.01 cm⁻¹ of HDXRD curve and E₂ (high) phonon of Raman spectrum respectively, we found that the crystal quality is perfect. And based on the XRD spectrum, the crystal lattice constants of Si (a = 5.3354 ?) and H-GaN (a_epi = 3.214 ?, c_epi = 5.119 ?) have been calculated for researching the tetragonal distortion of the sample. These results indicate that the GaN epilayer is in tensile strain and Si substrate is in compressive strain which were good agreement with the analysis of Raman peaks shift. Comparing with typical values of screw-type (D_screw = 7 × 10⁸ cm⁻²) and edge-type (D_edge = 2.9 × 10⁹ cm⁻²) dislocation density, which is larger than that in GaN epilayers growth on SiC or sapphire substrates. But our finding is important for the understanding and application of nitride semiconductors.     

Atom geometry of nanostructured Fe films grown on c(2 × 2)-N/Cu(1 0 0) surface: An investigation by X-ray absorption spectroscopy with multishell analysis

We investigated the growth of Fe nanostructured films on c(2 × 2)-N/Cu(1 0 0) surface with Fe K-edge X-ray absorption fine structure (XAFS) in the near edge and in the extended energy region. The high photon flux of the incident X-rays allowed us to perform multishell analysis of the XAFS oscillations for Fe coverage Θ_Fe < 1 ML. This data analysis yields a detailed investigation of the atom geometry and some insights in the film morphology. At Θ_N < 0.5 ML (N saturation coverage) there is absence of contribution to XAFS from N atoms. First shell analysis of linearly polarized XAFS gives Fe-Fe (or Fe-Cu) bond length values varying between R₁ = 2.526 ± 0.006 Å at the highest Fe coverage (3 ML ) and R₁ = 2.58 ± 0.01 Å at Θ_Fe = 0.5 ML, Θ_N = 0.3 ML, with incidence angle Θ = 35°. These values are different from the case of bcc Fe (R = 2.48 Å), and compatible with fcc Fe (R₁ = 2.52 Å) and fcc Cu (R₁ = 2.55 Å). At the Fe lowest coverage (Θ_Fe = 0.5 ML) the dependence of R₁ on the incidence angle indicates expansion of the outmost layer. Near edge spectra and multishell analysis can be well reproduced by fcc geometry with high degree of static disorder. At N saturation pre-coverage (Θ_N = 0.5 ML) the XAFS analysis has to keep into account the Fe-N bonding. The results suggest two different adsorption sites: one with Fe in a fcc hollow site, surrounded by other metal atoms as nearest neighbours, and one resulting from an exchange with a Cu atom underneath the N layer.     

Analysis of the first triad of interacting states (0 2 0), (1 0 0), and (0 0 1) of D2O from hot emission spectra

The far-infrared and middle-infrared emission spectra of deuterated water vapour were measured at temperatures 1370, 1520, and 1940 K in the ranges 320-860 and 1750-3400 cm⁻¹. The measurements were performed in an alumina cell with an effective length of hot gas of about 50 cm. More than 3550 new measured lines for the D₂¹⁶O molecule corresponding to transitions from highly excited rotational levels of the (0 2 0), (1 0 0), and (0 0 1) vibrational states are reported. These new lines correspond to rotational states with higher values of the rotational quantum numbers compared to previously published determinations: J_max = 29 and K_a(max) = 22 for the (0 2 0) state, J_max = 29 and K_a(max) = 25 for the (1 0 0) state, and J_max = 30 and K_a(max) = 23 for the (0 0 1) state. The extended set of 1987 experimental rotational energy levels for the (0 2 0), (1 0 0), and (0 0 1) vibration states including all previously available data has been determined. For the data reduction we used the generating function model. The root mean square (RMS) deviation between observed and calculated values is 0.004 cm⁻¹ for 1952 rovibrational levels of all three vibration states. A comparison of the observed energy levels with the best available values from the literature and with the global predictions from molecular electronic potential energy surfaces of water isotopic species [H. Partridge, D.W. Schwenke, J. Chem. Phys. 106 (1997) 4618] is discussed. The latter confirms a good consistency of mass-dependent DBOC corrections in the PS potential function with new experimental rovibrational data.     

Metal film growth on regular and defective MgO(0 0 1) surface: A comparative ab initio simulation and thermodynamic study

In order to understand the difference in metallic film growth modes on perfect and defective oxide substrates, we have combined ab initio B3LYP periodic calculations on the slab models of the corresponding Me/MgO(0 0 1) interfaces (Me = Ag, Cu) with thermodynamic theory of solid solutions. For a defectless magnesia surface, we confirm the experimentally observed submonolayer growth of 3D metallic islands (Ag possesses a higher trend than Cu). Formation of F_s centers (neutral O vacancies) on the substrate markedly enhances metal atom adsorption as compared to physisorption over regular sites on a defect-free substrate. For the first time, we predict that the presence of these surface defects (beginning with concentrations of 5% for Cu and 22% for Ag) can stimulate the growth of uniform 2D metallic sublayers.     

Adsorption of iso-butane on ZnO(0 0 0 1)-Zn

Presented are thermal desorption spectroscopy (TDS) and adsorption probability measurements of iso-butane on the Zn-terminated surface of ZnO. The initial adsorption probability, S₀, decreases linearly from 0.57 to 0.22 (±0.02) with impact energy, E_i = 0.74-1.92 eV, and is independent of adsorption temperature, T_s = 91-114 K (±5 K), indicating non-activated molecular adsorption. The coverage, Θ, dependent adsorption probabilities, S(Θ), show a cross-over from adsorbate-assisted adsorption (S increases with Θ) to Kisliuk-like dynamics at about the desorption temperature of iso-butane bi-layers (∼110 K). Thus, the adsorption dynamics are precursor-mediated. The enhanced (gas-surface) mass-match, caused by forming a second layer of the alkane, leads to adsorbate-assisted adsorption. A direct fitting procedure of the TDS data yields a pre-exponential factor of 2.5 × 10¹³/s and a coverage dependent heat of adsorption of E_d(Θ) = 39 − 6 ∗ Θ + 2.5 ∗ exp(−Θ/0.07) kJ/mol.     

SEM and XPS studies of nanohole arrays on InP(1 0 0) surfaces created by coupling AAO templates and low energy Ar ion sputtering

The aim of the present study is to demonstrate the feasibility to form well-ordered nanoholes on InP(1 0 0) surfaces by low Ar⁺ ion sputtering process in UHV conditions from anodized aluminum oxide (AAO) templates. This process is a promising approach in creating ordered arrays of surface nanostructures with controllable size and morphology. To follow the Ar⁺ ion sputtering effects on the AAO/InP surfaces, X-ray photoelectron spectroscopy (XPS) was used to determine the different surface species. In_4d and P_2p core level spectra were recorded on different InP(1 0 0) surfaces after ions bombardment. XPS results showed the presence of metallic indium on both smooth InP(1 0 0) and AAO/InP(1 0 0) surfaces. Finally, we showed that this experiment led to the formation of metallic In dropplets about 10 nm in diameter on nanoholes patterned InP surface while the as-received InP(1 0 0) surface generated metallic In about 60 nm in diameter.     

High resolution analysis of the rotational levels of the (0 0 0), (0 1 0), (1 0 0), (0 0 1), (0 2 0), (1 1 0) and (0 1 1) vibrational states of SO2

A high resolution (0.0018 cm⁻¹) Fourier transform instrument has been used to record the spectrum of an enriched ³⁴S (95.3%) sample of sulfur dioxide. A thorough analysis of the ν₂, 2ν₂ − ν₂, ν₁, ν₁ + ν₂ − ν₂, ν₃, ν₂ + ν₃ − ν₂, ν₁ + ν₂ and ν₂ + ν₃ bands has been carried out leading to a large set of assigned lines. From these lines ground state combination differences were obtained and fit together with the existing microwave, millimeter, and terahertz rotational lines. An improved set of ground state rotational constants were obtained. Next, the upper state rotational levels were fit. For the (0 1 0), (1 1 0) and (0 1 1) states, a simple Watson-type Hamiltonian sufficed. However, it was necessary to include explicitly interacting terms in the Hamiltonian matrix in order to fit the rotational levels of the (0 2 0), (1 0 0) and (1 0 1) states to within their experimental accuracy. More explicitly, it was necessary to use a ΔK = 2 term to model the Fermi interaction between the (0 2 0) and (1 0 0) levels and a ΔK = 3 term to model the Coriolis interaction between the (1 0 0) and (0 0 1) levels. Precise Hamiltonian constants were derived for the (0 0 0), (0 1 0), (1 0 0), (0 0 1), (0 2 0), (1 1 0) and (0 1 1) vibrational states.     

Pulsed laser deposition of fluoride glass thin films

The development of integrated waveguide lasers for different applications such as marking, illumination or medical technology has become highly desirable. Diode pumped planar waveguide lasers emitting in the green visible spectral range, e.g. thin films from praseodymium doped fluorozirconate glass matrix (called ZBLAN, owing to the main components ZrF₄, BaF₂, LaF₃, AlF₃ and NaF) as the active material pumped by a blue laser diode, have aroused great interest. In this work we have investigated the deposition of Pr:ZBLAN thin films using pulsed laser radiation of λ = 193 and λ = 248 nm. The deposition has been carried out on MgF₂ single crystal substrates in a vacuum chamber by varying both processing gas pressure and energy fluence. The existence of an absorption line at 210 nm in Pr:ZBLAN leads to absorption and radiative relaxation of the absorbed laser energy of λ = 193 nm preventing the evaporation of target material. The deposited thin films consist of solidified and molten droplets and irregular particulates only. Furthermore, X-ray radiation has been applied to fluoride glass targets to enhance the absorption in the UV spectral region and to investigate the deposition of X-ray treated targets applying laser radiation of λ = 248 nm. It has been shown that induced F-centres near the target surface are not thermally stable and can be easily ablated. Therefore, λ = 248 nm is not suitable for evaporation of Pr:ZBLAN.     

Highly efficient Nd:GdVO4/BiBO laser at 456 nm under direct 880 nm diode laser pumping

The continuous-wave high-efficiency laser emission of Nd:GdVO₄ at the second-harmonic of 456 nm obtained by intracavity frequency doubling with an BiB₃O₆(BiBO) nonlinear crystal is investigated under pumping by diode laser at 880 nm into emitting level ⁴F_3/2. About 3.8 W at 456 nm with M² = 1.4 was obtained from a 5 mm-thick 0.4 at.% Nd:GdVO₄ laser medium and a 12 mm-long BiBO nonlinear crystal in a Z-type cavity for 13.9 W absorbed pump power. An optical-to-optical efficiency with respect to the absorbed pump power was 0.274. Comparative results obtained for the pump with diode laser at 808 nm, into the highly-absorbing ⁴F_5/2 level, are given in order to prove the advantages of the 880 nm wavelength pumping.     

Influence of Co doping content on its valence state in Zn1−xCoxO (0 ≤ x ≤ 0.15) thin films

Zn_1−xCo_xO (0 ≤ x ≤ 0.15) thin films grown on Si (1 0 0) substrates were prepared by a sol-gel technique. The effects of Co doped on the structural, optical properties and surface chemical valence states of the Zn_1−xCo_xO (0 ≤ x ≤ 0.15) films were investigated by X-ray diffraction (XRD), ultraviolet-visible spectrometer and X-ray photoelectron spectroscopy (XPS). XRD results show that the Zn_1−xCo_xO films retained a hexagonal crystal structure of ZnO with better c-axis preferred orientation compared to the undoped ZnO films. The optical absorption spectra suggest that the optical band-gap of the Zn_1−xCo_xO thin films varied from 3.26 to 2.79 eV with increasing Co content from x = 0 to x = 0.15. XPS studies show the possible oxidation states of Co in Zn_1−xCo_xO (0 ≤ x ≤ 0.05), Zn_0.90Co_0.10O and Zn_0.85Co_0.15O are CoO, Co₃O₄ and Co₂O₃, with an increase of Co content, respectively.     

A Monte Carlo simulation study of H2 layers on NaCl(0 0 1)

Monte Carlo simulations show that, at one monolayer coverage, H₂ molecules adsorbed on a NaCl(0 0 1) surface occupy all Na⁺ sites and form a commensurate c(2 × 2) structure. If the Cl⁻ sites are occupied as well, a bi-layer p(2 × 1) structure forms. An examination of the H₂ molecules’ rotational motion shows the molecular axes are azimuthally delocalized and so both of the structures acquire (1 × 1) symmetry in accord with experimental observations. These calculations also show that helicoptering o-H₂ (J = 1, m = ±1) prefer to sit on top of Na⁺ sites, while cartwheeling o-H₂ (J = 1, m = 0) prefers to locate over Cl⁻ sites, in agreement with other work.     

Solid-state synthesis and magnetic properties of epitaxial FePd3(0 0 1) films

The solid-state synthesis of magnetically soft phase FePd₃ in epitaxial Pd(0 0 1)/Fe(0 0 1)/MgO(0 0 1) film systems was studied experimentally. The system had a Fe to Pd ratio of 1:3. An increase to 450 °C leads to the formation of three variants of ordered L1₀-FePd crystallites. At 500 °C, the solid-state reaction of unreacted Pd with L1₀-FePd crystallites initiates the growth of an ordered epitaxial L1₂-FePd₃(0 0 1) layer. When annealing at 650 °С, a gradual disordering is observed. The magnetic anisotropy (K₁=−2.0×10³ erg/cm³) and the saturation magnetization (M_S=650 emu/cm³) of the disordered FePd₃ phase were determined.