Removal of radiocobalt from aqueous solutions by kaolinite affected by solid content, pH, ionic strength, contact time and temperature

The kaolinite sample was characterized by Fourier transform infrared spectroscopy (FT-IR) and X-ray powder diffraction, and was applied as adsorbent for the removal of radiocobalt ions from radioactive wastewater. The results demonstrated that the sorption of Co(II) was strongly dependent on pH and ionic strength at low pH values, and independent of pH and ionic strength at high pH values. The sorption of Co(II) was dominated by outer-sphere surface complexation or ion exchange at low pH values, whereas inner-sphere surface complexation was the main sorption mechanism at high pH values. The sorption isotherms were well described by Langmuir, Freundlich and Dubinin–Radushkevich models. The thermodynamic parameters (i.e., ΔG°, ΔS°, ΔH°) calculated from the temperature-dependent sorption isotherms indicated that the sorption of Co(II) on kaolinite was an endothermic and spontaneous process. The results of high sorption capacity of kaolinite suggested that the kaolinite sample was a suitable material for the preconcentration of Co(II) from large volumes of aqueous solutions and as backfill materials in nuclear waste management.     

Impact of environmental conditions on the removal of Ni(II) from aqueous solution to bentonite/iron oxide magnetic composites

The sorption of radionuclide ⁶³Ni(II) on bentonite/iron oxide magnetic composites was investigated by batch technique under ambient conditions. The effect of contact time, solid content, pH, coexistent electrolyte ions, fulvic acid, and temperature on Ni(II) sorption to bentonite/iron oxide magnetic composites was examined. The results demonstrated that the sorption of Ni(II) was strongly dependent on pH and ionic strength at pH <8.0, and was independent of pH and ionic strength at high pH values. The sorption of Ni(II) was dominated by outer-sphere surface complexation or ion exchange at low pH, whereas inner-sphere surface complexation was the main sorption mechanism at high pH. The experimental data were well fitted by Langmuir model. The thermodynamic parameters (∆G°, ∆S°, ∆H°) calculated from the temperature-dependent sorption isotherms indicated that the sorption of Ni(II) on bentonite/iron oxide magnetic composites was an endothermic and spontaneous processes. The results show that bentonite/iron oxide magnetic composites are promising magnetic materials for the preconcentration and separation of radionickel from aqueous solutions in environmental pollution.     

Effect of pH,foreign ions and temperature on radionickel sorption onto bentonite from Inner Mongolia,China

The development of nuclear power releases large amounts of radionuclides into the natural environment. Herein, the sorption of radionuclide ⁶³Ni on bentonite from Gaomiaozi county (Inner Mongolia, China) at different experimental conditions such as pH, contact time, ionic strength, foreign cations and anions, and temperatures were investigated by using batch technique. The results indicated that the sorption of ⁶³Ni on the bentonite was quickly at first contact time and then increased slowly with increasing contact time. The sorption of ⁶³Ni was strongly dependent on ionic strength at low pH values and independent of ionic strength at high pH values. The sorption of ⁶³Ni on bentonite was mainly dominated by outer-sphere surface complexation or ion exchange at low pH values, whereas inner-sphere surface complexation was the main sorption mechanism at high pH values. The Langmuir, Freundlich, and D–R models were applied to simulate the sorption isotherms of ⁶³Ni at three different temperatures, and the thermodynamic parameters (i.e., ΔH°, ΔS° and ΔG°) calculated from the temperature-dependent sorption isotherms indicated that the sorption of ⁶³Ni on bentonite was an endothermic and spontaneous process. Experimental results indicate that the bentonite is a suitable material for the preconcentration and solidification of ⁶³Ni from large volume of solutions in radionickel pollution cleanup.     

Impact of environmental conditions on the sorption behavior of Pb(II) onto attapulgite

This paper examined the application of attapulgite as an adsorbent for the removal of Pb(II) from heavy metal-contaminated water under various conditions. The sorption results indicated that the sorption of Pb(II) on attapulgite was strongly dependent on ionic strength at pH < 7.0. Outer-sphere surface complexation or ion exchange may be the main sorption mechanism of Pb(II) on attapulgite at low pH values. No drastic difference of Pb(II) sorption was observed at pH 7.0–10.0, and the sorption at pH > 10.0 was mainly dominated by inner-sphere surface complexation. The sorption of Pb(II) on attapulgite was affected by foreign ions in solution at pH < 7.0, and was not affected by foreign ions at pH > 7.0. The thermodynamic parameters (ΔH°, ΔS° and ΔG°) were evaluated from the temperature-dependent sorption isotherms, and the results indicated that the sorption process of Pb(II) on attapulgite was spontaneous and endothermic in nature.     

Study of <Superscript>63</Superscript>Ni(II) sorption on CMC-bound bentonite from aqueous solutions

Bentonite was investigated to remove Ni(II) from aqueous solutions because of its strong sorption ability. Herein, bentonite was modified with sodium carboxymethylcellulose (CMC) and used as an adsorbent to remove Ni(II) from aqueous solutions. The results indicated that CMC-bentonite had higher sorption capacity than bare bentonite in the sorption of Ni(II) from aqueous solutions. Sorption of Ni(II) on CMC-bentonite was mainly dominated by ion exchange or outer-sphere surface complexation at low pH values, but by inner-sphere surface complexation or surface precipitation at high pH values. The thermodynamic data calculated from temperature dependent sorption isotherms indicated that the sorption of Ni(II) to CMC-bentonite hybrids was an spontaneous process and enhanced with increasing temperature.     

Sorption study of radionickel on attapulgite as a function of pH, ionic strength and temperature

Sorption of radionickel on attapulgite is studied as a function of contact time, ionic strength, pH and temperature. The results indicate that the sorption of Ni(II) on attapulgite is strongly ionic strength-dependent at pH <8, and independent of ionic strength at pH >8. Outer-sphere surface complexation or ion exchange contributes to Ni(II) sorption on attapulgite at pH <8, whereas the sorption of Ni(II) is mainly dominated by inner-sphere surface complexation at pH >8. The sorption of Ni(II) on attapulgite increases with increasing temperature, and the thermodynamic parameters (??H ⁰, ??G ⁰ and ??S ⁰) calculated from the temperature dependent sorption isotherms suggest that the sorption of Ni(II) on attapulgite is a spontaneous and endothermic process. The high sorption capacity of attapulgite suggests that attapulgite is a suitable material for the preconcentration and solidification of radionickel from large volumes of aqueous solutions.     

Application of NKF-6 zeolite for the removal of U(VI) from aqueous solution

To better understand the application of NKF-6 zeolite as an adsorbent for the removal of U(VI) from radionuclides and heavy metal ions polluted water, herein, NKF-6 zeolite was employed to remove U(VI) at different experimental conditions. The influence of solid/liquid ratio, contact time, pH, ionic strength, humic substances and temperature on sorption of U(VI) to NKF-6 zeolite was investigated using batch technique under ambient conditions. The experimental results demonstrated that the sorption of U(VI) on NKF-6 zeolite was strongly dependent on pH. The sorption property of U(VI) was influenced by ionic strength at pH < 7.0, whereas was independent of ionic strength at pH > 7.0. The presence of fulvic acid or humic acid promoted the sorption of U(VI) on NKF-6 zeolite at low pH values while restrained the sorption at high pH values. The thermodynamic parameters (i.e., ΔS ⁰, ΔH ⁰, and ΔG ⁰) calculated from the temperature-dependent sorption isotherms demonstrated that the sorption process of U(VI) on NKF-6 zeolite was endothermic and spontaneous. At low pH values, the sorption of U(VI) was dominated by outer-sphere surface complexation and ion exchange with Na⁺/H⁺ on NKF-6 zeolite surfaces, while inner-sphere surface complexation was the main sorption mechanism at high pH values. From the experimental results, one can conclude that NKF-6 zeolite can be used as a potential adsorbent for the preconcentration and solidification of U(VI) from large volumes of aqueous solutions.     

Effect of environmental conditions on 109Cd(II) sorption to MnO2

The sorption of Cd(II) from aqueous solution on MnO₂ was investigated under ambient conditions. Experiments were carried out as a function of contact time, solid content, pH, ionic strength, foreign ions, fulvic acid and temperature. The results indicated that the sorption of Cd(II) was strongly dependent on pH and ionic strength. At low pH, the sorption of Cd(II) was dominated by outer-sphere surface complexation and ion exchange with Na⁺/H⁺ on MnO₂ surfaces, whereas inner-sphere surface complexation was the main sorption mechanism at high pH. The Langmuir, Freundlich and Dubinin–Radushkevich models were used to simulate the sorption isotherms at three different temperatures. The thermodynamic data (ΔG ⁰, ΔS ⁰, ΔH ⁰) calculated from the temperature dependent sorption isotherms suggested that the sorption of Cd(II) on MnO₂ was an spontaneous and endothermic process.     

Removal of radiocobalt ions from aqueous solutions by natural halloysite nanotubes

In this study, natural halloysite nanotubes (HNTs) were applied to remove radiocobalt from wastewaters under various environmental parameters such as contact time, pH, ionic strength, foreign ions and temperature by using batch technique. The results indicated that the sorption of Co(II) on HNTs was dependent on ionic strength at pH < 8.5 and independent of ionic strength at pH > 8.5. Langmuir and Freundlich models were applied to simulate the sorption isotherms of Co(II) at three different temperatures of 293, 313 and 333 K. Langmuir model fitted the sorption isotherms of Co(II) on HNTs better than Freundlich model. The thermodynamic parameters (ΔG ⁰, ΔS ⁰ and ΔH ⁰) calculated from the temperature-dependent sorption isotherms manifested that the sorption of Co(II) on HNTs was an endothermic and spontaneous process. The sorption of Co(II) was dominated by outer-sphere surface complexation or ion exchange at low pH, whereas inner-sphere surface complexation or precipitation was the main sorption mechanism at high pH. The experimental results show that HNTs have good potentialities for cost-effective disposal of cobalt-bearing wastewaters.     

Effect of pH,ionic strength,foreign ions,humic acid and temperature on sorption of radionuclide <Superscript>60</Superscript>Co(II) on illite

In this article, a series of batch experiments were carried out to investigate the effect of various environmental factors such as contact time, solid content, pH, ionic strength, foreign ions, temperature and coexisting humic acid on the sorption behavior radionuclide ⁶⁰Co(II) on illite. The results indicated that the sorption of Co(II) was strongly dependent on pH, ionic strength and temperature. At low pH, the sorption was dominated by outer-sphere surface complexation and ion exchange on illite surfaces, whereas inner-sphere surface complexation was the main sorption mechanism at high pH. The Langmuir, Freundlich and Dubinin-Radushkevich (D-R) models were used to simulate the sorption isotherms at three different temperatures of 303.15, 323.15 and 343.15 K. The thermodynamic data (∆G ⁰, ∆S ⁰, ∆H ⁰) were calculated from the temperature dependent sorption isotherms and the results suggested that the sorption process of Co(II) on illite was an endothermic and spontaneous process. The sorption test revealed that the illite can be as a cost-effective adsorbent suitable for pre-concentration of Co(II) from large volumes of aqueous solutions.     

Thermodynamic studies of Ni(II) adsorption onto bentonite from aqueous solution

The adsorption behavior of Ni(II) onto bentonite was studied as a function of temperature under optimized conditions of shaking time, amount of adsorbent, pH, and concentration of the adsorbate. Thermodynamic parameters such as ΔH^°, ΔS^°, and ΔG^° were calculated from the slope and intercept of the linear plot of lgK_D against 1/T. Analysis of adsorption results obtained at T=(298, 303, 313, and 323) K showed that the adsorption pattern on bentonite followed the Langmuir, Freundlich, and D-R isotherms. A flame atomic absorption spectrophotometer was used for measuring the concentration of Ni(II).     

Impact of environmental conditions on the sorption behavior of radionuclide 63Ni(II) onto hierarchically structured γ-MnO2

A novel hierarchically structured γ-MnO₂ has been synthesized using a simple chemical reaction between MnSO₄ and KMnO₄ in aqueous solution without using any templates, surfactants, catalysts, calcination and hydrothermal processes. As an example of potential applications, hierarchically structured γ-MnO₂ was used as adsorbent in radionuclide ⁶³Ni(II) treatment, and showed an excellent ability. The effects of pH, ionic strength, temperature, humic acid (HA) and fulvic acid (FA) on the sorption of radionuclide ⁶³Ni(II) to hierarchically structured γ-MnO₂ have been investigated by using batch techniques. The results indicated that the sorption of ⁶³Ni(II) on γ-MnO₂ is obviously dependent on pH values but independent of ionic strength. The presence of HA/FA strongly enhances the sorption of ⁶³Ni(II) on γ-MnO₂ at low pH values, whereas reduces ⁶³Ni(II) sorption at high pH values. The sorption of ⁶³Ni(II) on γ-MnO₂ is attributed to inner-sphere surface complexation rather than outer-sphere surface complexation or ion exchange. The thermodynamic parameters (ΔH ⁰, ΔS ⁰, ΔG ⁰) are also calculated from the temperature dependent sorption isotherms, and the results suggest that the sorption of ⁶³Ni(II) on γ-MnO₂ is a spontaneous and endothermic process.     

Removal of Co(II) from aqueous solution by using hydroxyapatite

Herein, hydroxyapatite (HAP) was prepared by aqueous precipitation technique and was characterized by using FT-IR and XRD to determine its chemical functional groups and micro-structure. The removal of cobalt from aqueous solution to HAP was studied by batch technique as a function of various environmental parameters such as contact time, pH, ionic strength, foreign ions, fulvic acid (FA), and temperature under ambient conditions. The results indicated that the sorption of Co(II) on HAP was strongly dependent on pH and ionic strength. The presence of FA enhanced the sorption of Co(II) on HAP at low pH, whereas reduced Co(II) sorption on HAP at high pH. The Langmuir, Freundlich and D-R models were used to simulate the sorption isotherms at three different temperatures of 303.15, 323.15 and 343.15 K. The thermodynamic parameters (ΔH°, ΔS° and ΔG°) calculated from the temperature dependent sorption isotherms indicated that the sorption process of Co(II) on HAP was spontaneous and endothermic. The sorption of Co(II) was dominated by outer-sphere surface complexation and ion exchange at low pH, whereas inner-sphere surface complexation or surface precipitation was the main sorption mechanism at high pH values. The results suggest that the HAP is a suitable material in the preconcentration and solidification of Co(II) from large volumes of aqueous solutions.     

Impact of environmental conditions on the sorption behavior of 60Co(II) on illite

In this work, a naturally occurring illite was characterized by using FT-IR and XRD technique to determine its surface functional groups and crystal structure. Sorption of ⁶⁰Co(II) on illite as a function of contact time, pH, ionic strength, foreign ions, humic substances and temperature was studied under ambient condition using batch technique. The results indicated that the sorption of ⁶⁰Co(II) on illite is strongly affected by pH values (2–9) and ionic strength. A positive effect of humic substances on ⁶⁰Co(II) sorption was found at pH < 7.0, whereas a negative effect was observed at pH > 7.0. At low pH, the sorption of ⁶⁰Co(II) was dominated by outer-sphere surface complexation and ion exchange with Na⁺/H⁺ on illite surfaces, whereas inner-sphere surface complexation was the main sorption mechanism at high pH. The Langmuir and Freundlich models were used to simulate the sorption isotherms of ⁶⁰Co(II) at three different temperatures of 298.15, 323.15 and 343.15 K. The thermodynamic parameters (ΔH ⁰, ΔS ⁰ and ΔG ⁰) calculated from the temperature dependent sorption isotherms indicated that the sorption process of ⁶⁰Co(II) on illite was endothermic and spontaneous.     

Immobilization of uranium(VI) onto Mg2Al layered double hydroxide: role of key geochemical parameters

In this study, the sorption of U(VI) from aqueous solution on Mg₂Al layered double hydroxide (Mg₂Al LDH) was studied as a function of various water quality parameters such as contact time, pH, ionic strength, soil fulvic acid (FA), solid content and temperature by using a batch technique. The sorption of U(VI) on Mg₂Al LDH was dependent on pH. The presence of FA increased U(VI) sorption at low pH, whereas decreased U(VI) sorption at high pH. Both kinetics and thermodynamic parameters of the sorption process were evaluated. It was found that the pseudo-second-order model was more suitable for our experiment. The Langmuir model fitted the sorption isotherms of U(VI) better than the Freundlich and D-R model at three different temperatures of 298, 303 and 313 K. The thermodynamic parameters (ΔH°, ΔS°, and ΔG°) were calculated from the temperature dependent sorption isotherms, and the results suggested that U(VI) sorption was a spontaneous and endothermic process. The results demonstrate that Mg₂Al LDH is a promising sorbent material for the preconcentration and separation of uranium pollution from large volumes of aqueous solutions.     

Impact of environmental conditions on the sorption behavior of Co(II) on Na-rectorite studied by batch experiments

The sorption of Co(II) from aqueous solution on Na-rectorite was investigated under ambient conditions. Experiments were carried out as a function of contact time, solid content, pH, ionic strength, foreign ions, fulvic acid and temperature. The results indicated that the sorption of Co(II) was strongly dependent on pH. At low pH the sorption was dominated by outer-sphere surface complexation or ion exchange, whereas inner-sphere surface complexation was the main sorption mechanism at high pH. The Langmuir, Freundlich and Dubinin–Radushkevich (D–R) models were used to simulate the sorption isotherms at three different temperatures. The thermodynamic data (∆G ⁰, ∆S ⁰, ∆H ⁰) were calculated from the temperature dependent sorption isotherms and the results suggested that the sorption process of Co(II) on Na-rectorite was spontaneous and endothermic. Experimental results indicate that Na-rectorite is a suitable adsorbent for preconcentration and solidification of Co(II) from large volumes of aqueous solutions.     

Sorption of Cu(II) onto silica gel immobilized calix[4]arene derivative with tripodal structure

This study contains the synthesis of silica gel-immobilized calix[4]arene derivative (TR-CL[4]P) as a new sorbent and its sorption studies towards Cu (II) ion in aqueous solution. The aldehyde pointed calix[4]arene derivative 5 was synthesized and then it was immobilized onto 3-aminopropilsilica gel (APS). In batch sorption experiments, the experimental results showed that TR-CL[4]P is effective sorbent towards Cu (II) ion. Therefore, the effect of solution pH, sorption time, temperature and initial metal ion concentration onto Cu (II) sorption was investigated. Maximum Cu(II) removal was obtained at 30?°C, 30?min and pH 6.0 for TR-CL[4]P and the batch sorption capacity was found as 17.8?mg/g. The characteristics of the sorption process for Cu (II) ion were evaluated by using the Langmuir, Freundlich and Dubinin–Radushkevich (D–R) adsorption isotherms. Also, thermodynamic parameters, i.e., ΔG, ΔS, and ΔH were calculated for the system.     

Investigation of Co(II) sorption on GMZ bentonite from aqueous solutions by batch experiments

In this study, a local bentonite from Gaomiaozi county (Inner Mongolia, China) was converted to Na-bentonite and was characterized by FTIR and XRD to determine its chemical constituents and micro-structure. The removal of cobalt from aqueous solutions by Na-bentonite was investigated as a function of contact time, pH, ionic strength, foreign ions and temperature by batch technique under ambient conditions. The results indicated that the sorption of Co(II) was strongly dependent on pH. At low pH, the sorption of Co(II) was dominated by outer-sphere surface complexation or ion exchange whereas inner-sphere surface complexation was the main sorption mechanism at high pH. The Langmuir, Freundlich, and D-R models were used to simulate the sorption isotherms of Co(II) at the temperatures of 293.15, 313.15 and 333.15 K, respectively. The thermodynamic parameters (∆G°, ∆S°, ∆H°) of Co(II) sorption on GMZ bentonite calculated from the temperature-dependent sorption isotherms indicated that the sorption of Co(II) on GMZ bentonite was an exothermic and spontaneous process. The Na-bentonite is a suitable material for the preconcentration and solidification of Co(II) from aqueous solutions.     

Interaction of U(VI) with Na-attapulgite in the presence and absence of humic acid as a function of pH, ionic strength and temperature

The interaction of U(VI) with Na-attapulgite was studied by using batch technique at different experimental conditions. The effect of contact time, solid content, pH, ionic strength and temperature on the sorption of U(VI) onto Na-attapulgite in the presence and absence of humic acid was also investigated. The results showed that the sorption of U(VI) on Na-attapulgite achieved sorption equilibrium quickly. Sorption of U(VI) on Na-attapulgite increased quickly with increasing pH at pH < 6.5, and then decreased with pH increasing at pH > 6.5. The sorption curves were shifted to left in low NaClO₄ solutions as compared those in high NaClO₄ solutions. The sorption was strongly dependent on pH and ionic strength. The sorption was dominated by ion exchange or outer-sphere surface complexation at low pH values, and by inner-sphere surface complexation or surface precipitation at high pH values. The thermodynamic parameters (i.e., ΔH ⁰, ΔS ⁰, and ΔG ⁰) for the sorption of U(VI) were calculated from the temperature dependent sorption isotherms, and the results suggested that the sorption reaction was an endothermic and spontaneous process. The Na-attapulgite is a suitable material in the removal and preconcentration of U(VI) from large volumes of aqueous solutions in nuclear waste management.     

Sorption of radiocobalt(II) onto MWCNTs: effects of solid content, contact time, pH, ionic strength, humic acid and temperature

Multiwalled carbon nanotubes (MWCNTs) have attracted intense multidisciplinary study because of their special physicochemical properties. In this paper, the effect of solid content, contact time, pH, temperature and humic acid on radionuclide (⁶⁰Co(II)) on MWCNTs was studied by using batch technique. The results indicate that the sorption of Co(II) on MWCNTs can achieve sorption equilibration in short time and the kinetic sorption can be described by pseudo-second-order model well. The sorption of Co(II) on MWCNTs is strongly dependent on pH and independent of ionic strength, suggesting that the sorption of Co(II) on MWCNTs is mainly dominated by inner-sphere surface complexation rather than by outer-sphere surface complexation or ion exchange. The thermodynamic parameters calculated from the temperature-dependent sorption isotherms indicate that the sorption of Co(II) on MWCNTs was an endothermic and spontaneous process. The results of high sorption capacity of Co(II) suggest that MWCNTs can be used as efficient materials for the preconcentration of radiocobalt from large volumes of aqueous solutions in radionuclide polluted water.