Application of NKF-6 zeolite for the removal of U(VI) from aqueous solution

To better understand the application of NKF-6 zeolite as an adsorbent for the removal of U(VI) from radionuclides and heavy metal ions polluted water, herein, NKF-6 zeolite was employed to remove U(VI) at different experimental conditions. The influence of solid/liquid ratio, contact time, pH, ionic strength, humic substances and temperature on sorption of U(VI) to NKF-6 zeolite was investigated using batch technique under ambient conditions. The experimental results demonstrated that the sorption of U(VI) on NKF-6 zeolite was strongly dependent on pH. The sorption property of U(VI) was influenced by ionic strength at pH < 7.0, whereas was independent of ionic strength at pH > 7.0. The presence of fulvic acid or humic acid promoted the sorption of U(VI) on NKF-6 zeolite at low pH values while restrained the sorption at high pH values. The thermodynamic parameters (i.e., ΔS ⁰, ΔH ⁰, and ΔG ⁰) calculated from the temperature-dependent sorption isotherms demonstrated that the sorption process of U(VI) on NKF-6 zeolite was endothermic and spontaneous. At low pH values, the sorption of U(VI) was dominated by outer-sphere surface complexation and ion exchange with Na⁺/H⁺ on NKF-6 zeolite surfaces, while inner-sphere surface complexation was the main sorption mechanism at high pH values. From the experimental results, one can conclude that NKF-6 zeolite can be used as a potential adsorbent for the preconcentration and solidification of U(VI) from large volumes of aqueous solutions.     

Impact of environmental conditions on the sorption behavior of UO<Subscript>2</Subscript><Superscript>2+</Superscript> onto attapulgite studied by batch experiments

The sorption of UO₂ ²⁺ from aqueous solution on attapulgite was investigated as a function of contact time, solid content, pH, ionic strength, foreign ions, humic acid (HA), and fulvic acid (FA) under ambient conditions by using batch technique. The attapulgite sample was characterized by XRD and FTIR in detail. The results indicated that the sorption of UO₂ ²⁺ was strongly dependent on pH and ionic strength. The sorption of UO₂ ²⁺ on attapulgite increased quickly with rising pH at pH < 6.5, and decreased with increasing pH at pH > 6.5. The presence of HA or FA enhanced the sorption of UO₂ ²⁺ on attapulgite obviously at low pH because of the strong complexation of surface adsorbed HA/FA with UO₂ ²⁺ on attapulgite surface. Sorption of UO₂ ²⁺ on attapulgite was mainly dominated by ion-exchange or outer-sphere surface complexation at low pH values, but by inner-sphere surface complexation at high pH values. The results indicate that attapulgite is a very suitable adsorbent for the preconcentration and solidification of UO₂ ²⁺ from large volumes of aqueous solutions because of its negative surface charge and large surface areas.     

Removal of U(VI) from aqueous solutions by using MWCNTs and chitosan modified MWCNTs

In this paper, the multiwalled carbon nanotubes (MWCNTs) were modified with chitosan (CS) by using low temperature plasma grafting technique (denoted as MWCNT-CS). The prepared MWCNTs and MWCNT-CS were characterized by SEM, TEM, FTIR and Raman spectroscopy in detail and the results suggested that CS molecules were successfully grafted on the surfaces of MWCNTs. The materials were applied as adsorbents in the removal of U(VI) ions from large volumes of aqueous solutions as a function of environmental conditions. The removal of U(VI) from aqueous solution to MWCNTs and MWCNT-CS increased with increasing pH values at pH < 7, and then decreased with increasing pH values at pH > 7. The sorption of U(VI) on MWCNTs and MWCNT-CS was strongly dependent on pH and independent of ionic strength. The sorption of U(VI) on MWCNTs and MWCNT-CS was dominated by inner-sphere surface complexation rather than by ion exchange or outer-sphere surface complexation. The surface grafted chitosan molecules can enhances U(VI) sorption on MWCNTs obviously, which was also evidenced from the XPS spectroscopy analysis. The results of high sorption capacity of U(VI) on MWCNT-CS suggest that the MWCNT-CS nanomaterial is a suitable candidate in the preconcentration of U(VI) ions from large volumes of aqueous solutions.     

Removal of radiocobalt ions from aqueous solutions by natural halloysite nanotubes

In this study, natural halloysite nanotubes (HNTs) were applied to remove radiocobalt from wastewaters under various environmental parameters such as contact time, pH, ionic strength, foreign ions and temperature by using batch technique. The results indicated that the sorption of Co(II) on HNTs was dependent on ionic strength at pH < 8.5 and independent of ionic strength at pH > 8.5. Langmuir and Freundlich models were applied to simulate the sorption isotherms of Co(II) at three different temperatures of 293, 313 and 333 K. Langmuir model fitted the sorption isotherms of Co(II) on HNTs better than Freundlich model. The thermodynamic parameters (ΔG ⁰, ΔS ⁰ and ΔH ⁰) calculated from the temperature-dependent sorption isotherms manifested that the sorption of Co(II) on HNTs was an endothermic and spontaneous process. The sorption of Co(II) was dominated by outer-sphere surface complexation or ion exchange at low pH, whereas inner-sphere surface complexation or precipitation was the main sorption mechanism at high pH. The experimental results show that HNTs have good potentialities for cost-effective disposal of cobalt-bearing wastewaters.     

Impact of environmental conditions on the sorption behavior of Pb(II) onto attapulgite

This paper examined the application of attapulgite as an adsorbent for the removal of Pb(II) from heavy metal-contaminated water under various conditions. The sorption results indicated that the sorption of Pb(II) on attapulgite was strongly dependent on ionic strength at pH < 7.0. Outer-sphere surface complexation or ion exchange may be the main sorption mechanism of Pb(II) on attapulgite at low pH values. No drastic difference of Pb(II) sorption was observed at pH 7.0–10.0, and the sorption at pH > 10.0 was mainly dominated by inner-sphere surface complexation. The sorption of Pb(II) on attapulgite was affected by foreign ions in solution at pH < 7.0, and was not affected by foreign ions at pH > 7.0. The thermodynamic parameters (ΔH°, ΔS° and ΔG°) were evaluated from the temperature-dependent sorption isotherms, and the results indicated that the sorption process of Pb(II) on attapulgite was spontaneous and endothermic in nature.     

Sorption of uranium(VI) on Na-attapulgite as a function of contact time,solid content,pH, ionic strength,temperature and humic acid

Sorption of U(VI) from aqueous solution to Na-attapulgite was investigated at different experimental chemistry conditions by using batch technique. The attapulgite sample was characterized by FTIR and XRD. Sorption of U(VI) on attapulgite was strongly dependent on pH and ionic strength. The sorption of U(VI) on attapulgite increased quickly with rising pH at pH < 6, and decreased with increasing pH at pH > 7. The presence of humic acid (HA) enhanced the sorption of U(VI) on attapulgite obviously at low pH because of the strong complexation of surface adsorbed HA with U(VI) on attapulgite surface. Sorption of U(VI) on attapulgite was mainly dominated by ion exchange and/or outer-sphere surface complexation at low pH values, whereas the sorption was attributed to the inner-sphere surface complexation or precipitation at high pH values. The sorption increased with increasing temperature and the thermodynamic parameters calculated from the temperature dependent sorption isotherms suggested that the sorption of U(VI) on attapulgite was a spontaneous and endothermic process. The results indicate that attapulgite is a very suitable material for the preconcentration of U(VI) ions from large volumes of aqueous solutions.     

Immobilization of uranium(VI) onto Mg2Al layered double hydroxide: role of key geochemical parameters

In this study, the sorption of U(VI) from aqueous solution on Mg₂Al layered double hydroxide (Mg₂Al LDH) was studied as a function of various water quality parameters such as contact time, pH, ionic strength, soil fulvic acid (FA), solid content and temperature by using a batch technique. The sorption of U(VI) on Mg₂Al LDH was dependent on pH. The presence of FA increased U(VI) sorption at low pH, whereas decreased U(VI) sorption at high pH. Both kinetics and thermodynamic parameters of the sorption process were evaluated. It was found that the pseudo-second-order model was more suitable for our experiment. The Langmuir model fitted the sorption isotherms of U(VI) better than the Freundlich and D-R model at three different temperatures of 298, 303 and 313 K. The thermodynamic parameters (ΔH°, ΔS°, and ΔG°) were calculated from the temperature dependent sorption isotherms, and the results suggested that U(VI) sorption was a spontaneous and endothermic process. The results demonstrate that Mg₂Al LDH is a promising sorbent material for the preconcentration and separation of uranium pollution from large volumes of aqueous solutions.     

Sorption of plutonium from low level liquid waste using nano MnO2

Nano-crystalline MnO₂ has been synthesized by the method of alcoholic hydrolysis of KMnO₄ and its potential as a sorbent for plutonium present in the low level liquid waste (LLW) solutions was investigated. The kinetic studies on the sorption of Pu by MnO₂ reveal the attainment of equilibrium sorption in 15 h, however 90 % of sorption could be achieved within an hour. In the studies on optimization of the solution conditions for sorption, it was observed that the sorption increases with the pH of the aqueous solution, attains the maximum value of 100 % at pH = 3 and remains constant thereafter. The sorption was found to be nearly independent of the ionic strength (0.01–1.0 M) of the aqueous solutions maintained using NaClO₄, indicating the inner sphere complexation between the Pu⁴⁺ ions and the surface sites on MnO₂. Interference studies with different fission products, viz., Cs⁺, Sr²⁺ and Nd³⁺, revealed decrease in the percentage sorption with increasing pH of the suspension indicating the competition between the metal ions. However, at the metal ion concentrations prevalent in the low level liquid waste solutions, the decrease in the Pu sorption was only marginally decreased to 90 % at pH = 3, the decrease being more in the case of Nd³⁺ than that in the case of Cs⁺. This study, therefore, shows nano-crystalline MnO₂ can be used as a sorbent for separation of Pu from LLW solutions.     

Impact of environmental conditions on the sorption behavior of 60Co(II) on illite

In this work, a naturally occurring illite was characterized by using FT-IR and XRD technique to determine its surface functional groups and crystal structure. Sorption of ⁶⁰Co(II) on illite as a function of contact time, pH, ionic strength, foreign ions, humic substances and temperature was studied under ambient condition using batch technique. The results indicated that the sorption of ⁶⁰Co(II) on illite is strongly affected by pH values (2–9) and ionic strength. A positive effect of humic substances on ⁶⁰Co(II) sorption was found at pH < 7.0, whereas a negative effect was observed at pH > 7.0. At low pH, the sorption of ⁶⁰Co(II) was dominated by outer-sphere surface complexation and ion exchange with Na⁺/H⁺ on illite surfaces, whereas inner-sphere surface complexation was the main sorption mechanism at high pH. The Langmuir and Freundlich models were used to simulate the sorption isotherms of ⁶⁰Co(II) at three different temperatures of 298.15, 323.15 and 343.15 K. The thermodynamic parameters (ΔH ⁰, ΔS ⁰ and ΔG ⁰) calculated from the temperature dependent sorption isotherms indicated that the sorption process of ⁶⁰Co(II) on illite was endothermic and spontaneous.     

Uptake properties of Eu(III) on Na-attapulgite as a function of pH, ionic strength and temperature

Herein, the sorption properties of Eu(III) on Na-attapulgite were performed by using batch sorption experiments under different experimental conditions, such as contact time, pH, ionic strength, humic acid and temperatures. The results indicated that the sorption of Eu(III) on Na-attapulgite was strongly dependent on pH and temperature. At low pH values, the sorption of Eu(III) was influenced by ionic strength, whereas the sorption was not affected by ionic strength at high pH values. The sorption of Eu(III) was mainly dominated by ion exchange or outer-sphere surface complexation at low pH values, and by inner-sphere surface complexation or surface precipitation at high pH values. The sorption of Eu(III) onto Na-attapulgite increased with increasing temperature. The Langmuir and Freundlich models were applied to simulate the sorption isotherms, and the results indicated that the Langmuir model simulated the sorption isotherms better than the Freundlich model. The thermodynamic parameters (∆G ^o, ∆S ^o, ∆H ^o) were calculated from the temperature dependent sorption isotherms at 293, 313 and 333 K, respectively, and the results indicated that the uptake of Eu(III) on Na-attapulgite was an endothermic and spontaneous process. The results of high Eu(III) sorption capacity on Na-attapulgite suggest that the attapulgite is a suitable material for the preconcentration and immobilization of Eu(III) ions from large volumes of aqueous solutions.     

Sorption of Th(IV) from aqueous solution to GMZ bentonite: effect of pH, ionic strength, fulvic acid and electrolyte ions

Bentonite has been studied extensively because of its strong sorption and complexation ability. In this study, GMZ bentonite (China) was studied as a potential sorbent for the removal of Th(IV) from aqueous solutions. The results indicate that the sorption of Th(IV) is strongly dependent on pH and ionic strength at pH <5, and is independent of ionic strength at pH >5. Outer-sphere surface complexation or ion exchange in inter-layer sites of the montmorillonite fraction of the GMZ bentonite may be the main sorption mechanism of Th(IV) onto GMZ bentonite at low pH values, whereas the sorption of Th(IV) at pH >5 is mainly dominated by inner-sphere surface complexation or surface precipitation. The presence of soil fulvic acid has a positive influence on the sorption of Th(IV) on GMZ bentonite at pH <5. The competition between Th(IV) with aqueous or surface adsorbed cation ions (e.g., herein Li⁺, Na⁺ and K⁺) and surface functional groups of GMZ bentonite is important for Th(IV) sorption on GMZ bentonite. The results of high sorption of Th(IV) suggest that the GMZ bentonite is a suitable backfill material in nuclear waste management.     

Solution chemistry effects on sorption behavior of 109Cd(II) on Ca-montmorillonite

The sorption of radiocadmium on Ca-montmorillonite as a function of contact time, pH, ionic strength, foreign ions, humic acid (HA) and fulvic acid (FA) was studied using batch technique. The results demonstrated that the sorption of Cd(II) was dependent on ionic strength at pH < 9, and was independent of ionic strength at pH > 9. Outer-sphere surface complexation and/or ion exchange were the main mechanism of Cd(II) sorption on Ca-montmorillonite at low pH, whereas the sorption at high pH was mainly dominated via inner-sphere surface complexation. The sorption of Cd(II) on Ca-montmorillonite was dependent on foreign ions at low pH values, but was independent of foreign ions at high pH values. A positive effect of HA/FA on Cd(II) sorption was found at low pH values, whereas a negative effect was observed at high pH values. The thermodynamic parameters (i.e., ??H ⁰, ??S ⁰, ??G ⁰) were calculated from the temperature dependent sorption isotherms, and the results indicated that the sorption process of Cd(II) on Ca-montmorillonite was spontaneous and endothermic.     

Adsorption of U(VI) onto the carboxymethylated chitosan/Na-bentonite membranes: kinetic,isothermic and thermodynamic studies

The carboxymethylated chitosan (CMC)/Na-bentonite (Na-Bt) composite membranes were prepared and throughly characterized. The Na-Bt/CMC mass ratio was optimized, and CB10 (membrane with Na-Bt/CMC mass ratio of 10%) was selected as the best membrane for U(VI) sorption. XPS analysis indicates that the main mechanism for UO₂²⁺ sorption onto CB10 is through inner-surface complexation. The sorption kinetics followed pseudo-second order model, indicating the chemisorption as the rate-controlling step. The U(VI) sorption on CB10 is endothermic and spontaneous, with the maximum mono-layer adsorption capacity of 115.6 mg/g at pH 5.0 and 298 K. Finally, the U(VI)-loaded CB10 can consecutively desorbed and reused for several cycles.     

Sorption of radiocobalt(II) from aqueous solutions to Na-attapulgite

The sorption of Co(II) on Na-attapulgite as a function of contact time, solid content, pH, ionic strength, foreign ions, fulvic acid (FA) and temperature under ambient conditions was studied. The kinetic of Co(II) sorption on Na-attapulgite was described well by pseudo-second-order model. The sorption of Co(II) on Na-attapulgite was strongly dependent on pH and ionic strength. The sorption of Co(II) was mainly dominated by outer-sphere surface complexation and/or ion exchange at low pH, whereas inner-sphere surface complexation or surface precipitation was the main sorption mechanism at high pH values. The presence of FA did not affect Co(II) sorption obviously at pH <7, and a negative effect was observed at pH >7. The Langmuir and Freundlich models were used to simulate the sorption data at different temperatures, and the results indicated that the Langmuir model simulated the data better than the Freundlich isotherm model. The thermodynamic parameters (∆G°, ∆S°, ∆H°) calculated from the temperature-dependent sorption isotherms indicated that the sorption of Co(II) on Na-attapulgite was an endothermic and spontaneous process. The results suggest that the attapulgite sample is a suitable material in the preconcentration and solidification of radiocobalt from large volumes of aqueous solutions.     

Removal of uranium(VI) from aqueous solutions using nanoporous ZnO prepared with microwave-assisted combustion synthesis

The adsorption of the uranyl ions from aqueous solutions on the nanoporous ZnO powders has been investigated under different experimental conditions. The adsorption of uranyl on nanoporous ZnO powders were examined as a function of the contact times, pH of the solution, concentration of uranium(VI) and temperature. The ability of this material to remove U(VI) from aqueous solution was followed by a series of Langmuir and Freunlinch adsorption isotherms. The adsorption percent and distribution coefficient for nanoporous ZnO powders were 98.65 % ± 1.05 and 7,304 mL g^?1, respectively. The optimum conditions were found as at pH 5.0, contact time 1 h, at 1/5 Zn²⁺/urea ratio, 50 ppm U(VI) concentration and 303 K. The monomolecular adsorption capacity of nanoporous ZnO powders for U(VI) was found to be 1,111 mg g^?1 at 303 K. Using the thermodynamic equilibrium constants obtained at different temperatures, various thermodynamic parameters, such as ΔG°, ΔH° and ΔS°, have been calculated. Thermodynamic parameters (ΔH° = 28.1 kJ mol ^?1, ΔS° = 160.30 J mol^?1 K^?1, ΔG° = ?48.54 kJ mol^?1) showed the endothermic and spontaneous of the process. The results suggested that nanoporous ZnO powders was suitable as sorbent material for recovery and adsorption of U(VI) ions from aqueous solutions.     

Characterization of radioactive cobalt on graphene oxide by macroscopic and spectroscopic techniques

Graphene oxide (GO) was synthesized using the modified Hummers method and characterized by XRD and FTIR. The sorption of ⁶⁰Co(II) on GO as a function of contact time, pH, polyacrylic acid, ionic strength, temperature and solution concentration was studied by batch technique. The sorption kinetics indicated that the sorption of ⁶⁰Co(II) on GO could be simulated by the pseudo-second-order model very well. The maximum sorption capacities of GO for ⁶⁰Co(II) calculated from Langmuir model at pH 6.40 and T = 300 K was ~62.0 mg/g. The thermodynamic parameters from the temperature-dependent sorption isotherms indicated that the ⁶⁰Co(II) sorption on GO was an endothermic and spontaneous process. The interaction mechanism between GO and Co(II) were outer-sphere surface complexation or ion exchange at pH <7, whereas the inner-sphere surface complexation was observed at pH 7–9 in terms of the analysis of XPS spectra.     

Influence of pH,soil humic acid,ionic strength and temperature on sorption of U(VI) onto attapulgite

The surface property of attapulgite was investigated by N₂-BET surface area and zeta potential analysis in this paper. Solution pH had a remarkable effect on the sorption process, indicated an inner-sphere complexation. Humic acid (HA) in the solution enhanced U(VI) sorption significantly at pH?<?5.0, while decreased U(VI) sorption obviously at pH?>?9.0. The characteristic fluorescence changes of HA indicated that a strong chemical reaction occurred between the functional groups in HA and UO₂²⁺. The sorption was a spontaneous and endothermic process with increased entropy, and the increase in temperature would benefit the sorption.     

Sorption study of uranium from aqueous solution on ordered mesoporous carbon CMK-3

The ability of ordered mesoporous carbon CMK-3 has been explored for the removal and recovery of uraium from aqueous solutions. The textural properties of CMK-3 were characterized using small-angle X-ray diffraction and N₂ adsorption–desorption, and the BET specific surface area, pore volume and the pore size were 1143.7 m²/g, 1.10 cm³/g and 3.4 nm. The influences of different experimental parameters such as solution pH, initial concentration, contact time, ionic strength and temperature on adsorption were investigated. The CMK-3 showed the highest uranium sorption capacity at initial pH of 6.0 and contact time of 35 min. Adsorption kinetics was better described by the pseudo-second-order model and adsorption process could be well defined by the Langmuir and Freundlich isotherm. The thermodynamic parameters, ?G°(298 K), ?H° and ?S° were determined to be ?7.7, 21.5 k J mol^?1 and 98.2 J mol^?1 K^?1, respectively, which demonstrated the sorption process of CMK-3 towards U(VI) was feasible, spontaneous and endothermic in nature. The adsorbed CMK-3 could be effectively regenerated by 0.05 mol/L HCl solution for the removal and recovery of U(VI). Complete removal (99.9 %) of U(VI) from 1.0 L industry wastewater containing 15.0 mg U(VI) ions was possible with 2.0 g CMK-3.     

Effect of environmental conditions on 109Cd(II) sorption to MnO2

The sorption of Cd(II) from aqueous solution on MnO₂ was investigated under ambient conditions. Experiments were carried out as a function of contact time, solid content, pH, ionic strength, foreign ions, fulvic acid and temperature. The results indicated that the sorption of Cd(II) was strongly dependent on pH and ionic strength. At low pH, the sorption of Cd(II) was dominated by outer-sphere surface complexation and ion exchange with Na⁺/H⁺ on MnO₂ surfaces, whereas inner-sphere surface complexation was the main sorption mechanism at high pH. The Langmuir, Freundlich and Dubinin–Radushkevich models were used to simulate the sorption isotherms at three different temperatures. The thermodynamic data (ΔG ⁰, ΔS ⁰, ΔH ⁰) calculated from the temperature dependent sorption isotherms suggested that the sorption of Cd(II) on MnO₂ was an spontaneous and endothermic process.     

Uranium extraction from aqueous solution using dried and pyrolyzed tea and coffee wastes

The adsorption of U(VI) onto dried and pyrolyzed tea and coffee wastes was investigated. The adsorption properties of the materials were characterized by measuring uranium uptake as a function of solution pH, kinetics and adsorption isotherms. pH profile of uranium adsorption where UO₂ ²⁺ is expected to be the predominant species was measured between pH 0 and 4. Both Langmuir and Freundlich adsorption models were used to describe adsorption equilibria, and corresponding constants evaluated. Using the Langmuir model, the maximum adsorption capacity of uranium by dried tea and coffee wastes was 59.5 and 34.8 mg/g, respectively at 291 K. Adsorption thermodynamic constants, ΔH° ΔS° and ΔG° were also calculated from adsorption data obtained at three different temperatures. Adsorption thermodynamics of uranyl ions on dried tea and coffee systems indicated spontaneous and endothermic processes. Additionally, a Lagergren pseudo-second-order kinetic model was used to fit the kinetic experimental data for both adsorbents and the constants evaluated. Dried tea and coffee wastes proved to be effective adsorbents with high capacities and significant advantage of a very low cost.