Spondias mombin L. as a green corrosion inhibitor for aluminium in sulphuric acid: Correlation between inhibitive effect and electronic properties of extracts major constituents using density functional theory

The inhibition of aluminium in 0.5 M H₂SO₄ by extracts of Spondias mombin L. was investigated using the standard gravimetric technique at 30–60 °C. The trend of inhibition efficiency with temperature was used to propose the mechanism of inhibition. It was found that the S. mombin L. extract acts as an inhibitor for acid-induced corrosion of aluminium. Inhibition efficiency (%I) of the extract increased with an increase in concentration of the S. mombin L. extract but decreased with temperature. Furthermore, inhibition efficiency (%I) synergistically increased on addition of potassium iodide. Inhibitor adsorption characteristics were approximated by Langmuir adsorption isotherm at all the concentrations and temperatures studied. The mechanism of physical adsorption is proposed from the trend of inhibition efficiency with temperature and from the calculated values of Gibbs free energy, activation energy and heat of adsorption. Quantum chemical calculations were performed using the density functional theory at B3LYP/6-31G (d) level of theory to find out whether a clear link exists between the inhibitive effect of the extract and the electronic properties of its main constituents.     

Inhibition effect of environmentally benign Karanj (Pongamia pinnata) seed extract on corrosion of mild steel in hydrochloric acid solution

The inhibition of the corrosion of mild steel in hydrochloric acid solution by the seed extract of Karanj (Pongamia pinnata) has been studied using weight loss, electrochemical impedance spectroscopy, potentiodynamic polarization, and linear polarization techniques. Inhibition was found to increase with increasing concentration of the extract. The effect of temperature, immersion time, and acid concentration on the corrosion behavior of mild steel in 1 M HCl with addition of extract was also studied. The adsorption of the extract on the mild steel surface obeyed the Langmuir adsorption isotherm. Values of inhibition efficiency calculated from weight loss, potentiodynamic polarization, and electrochemical impedance spectroscopy are in good agreement. Polarization curves showed that Karanj (P. pinnata) seed extract behaves as a mixed-type inhibitor in hydrochloric acid. The activation energy as well as other thermodynamic parameters for the inhibition process was calculated. The adsorbed film on mild steel surface containing Karanj (P. pinnata) seed extract inhibitor was also measured by Fourier transform infrared spectroscopy. The results obtained showed that the seed extract of Karanj (P. pinnata) could serve as an effective inhibitor of the corrosion of mild steel in hydrochloric acid media.     

Inhibitive effect by extract of Mentha rotundifolia leaves on the corrosion of steel in 1 M HCl solution

An extract of Mentha rotundifolia leaves (EMRL) was tested as a corrosion inhibitor of steel in 1 M HCl using electrochemical impedance spectroscopy, Tafel polarization methods, and weight loss measurements. The inhibition efficiency of the extract of Mentha rotundifolia leaves was calculated and compared. We note good agreement between these methods. The results obtained revealed that the inhibitor tested differently reduced the kinetics of the corrosion process of steel. Its efficiency increases with the concentration and attained 92.87 % at 35 %. The effect of temperature on the corrosion behavior of steel in 1 M HCl was also studied in the range 298 and 338 K. The thermodynamic data of activation were determined. Mentha rotundifolia extract is adsorbed on the steel surface according to a Langmuir adsorption model.     

Preparation of poly(naphthylamine-formaldehyde); Application as a new and an effective inhibitor of steel in hydrochloride acid solution

In this research, we first prepared poly (naphthylamine-formaldehyde) (PNAF) and then investigated its corrosion inhibition properties for polished steel specimens in 1 M HCl solution using chemical and electrochemical methods. Results showed that the PNAF could serve as an effective inhibitor of the corrosion of steel in hydrochloric acid media (the inhibition efficiency of this polymer at an optimum concentration of 100 mg L^–1 was 99.9 %). The effect of temperatures on the corrosion behavior of steel was studied in the temperature ranging from 303 to 333 K for 1 M HCl at an optimum concentration of PNAF. It has been demonstrated that the adsorption behavior of this polymer on steel in 1 M HCl was found to obey Langmuir adsorption isotherm. Also, potentiodynamic polarization measurements showed that PNAF was a mixed type inhibitor.     

Inhibitory effects of Murraya koenigii (curry leaf) leaf extract on the corrosion of mild steel in 1 M HCl

Abstract

The inhibitive effect of the Murraya koenigii (curry leaf) leaf extract on the corrosion of mild steel in 1 M HCl was investigated by using weight loss, open circuit potential measurements, potentiostatic polarization techniques, and impedance analysis. The results show that Murraya koenigii extract is an effective corrosion inhibitor for protecting the corrosion of mild steel in 1 M HCl medium even at stimulated conditions. The inhibition efficiency increases with increasing the concentration of the inhibitor in the medium. The percentage inhibitor efficiency under stagnant condition calculated based on weight loss method is found to be above 94.5% when the medium contains 1000 ppm of the inhibitor.     

An investigation of carbon steel corrosion inhibition in hydrochloric acid medium by an environmentally friendly green inhibitor

The inhibition effect of polyphenols extracted from olive mill wastewater (PP) on carbon steel in 1.0 M HCl solution was studied. Inhibition efficiency of PP was carried out by using chemical (weight loss method) and electrochemical techniques [potentiodynamic polarization and electrochemical impedance spectroscopy (EIS)]. The effect of temperature and immersion time on the corrosion behavior of carbon steel in 1.0 M HCl with addition of an extract was also studied. The results show that PP acts as a very good inhibitor, and the inhibition efficiency increases with the concentration of PP and decreases with rising temperature. Polarization curves show that PP behaves as a mixed-type inhibitor in hydrochloric acid. Data, obtained from EIS measurements, were analyzed to model the corrosion inhibition process through an appropriate equivalent circuit model; a constant phase element has been used. EIS shows that charge-transfer resistance increases and the capacitance of double layer decreases with the inhibitor concentration, confirming the adsorption process mechanism. The activation energy as well as other thermodynamic parameters for the inhibition process were calculated. The adsorption of PP obeys the Langmuir adsorption isotherm.     

Electrochemical investigation of a schiff base synthesized by cinnamaldehyde as corrosion inhibitor on mild steel in acidic medium

The inhibiting effect of (NE)-4-phenoxy-N-(3-phenylallylidene) aniline (PAC) on the corrosion of mild steel in 1.0 M HCl has been studied by electrochemical impedance spectroscopy, and Tafel polarization measurements. The corrosion rate was also calculated theoretically in terms of mm per year and mil per year, using current density values of mild steel in 1.0 M HCl medium. It was found that PAC has a remarkable inhibition efficiency on the corrosion of mild steel especially at high temperatures. The values of E _a obtained in presence of a Schiff base were found to be lower than those obtained in the inhibitor-free solution. The increase of inhibition efficiency percent with temperature increase was associated with the transformation of physical adsorption into chemical adsorption. The thermodynamic functions of adsorption processes have been evaluated and discussed at each temperature. Scanning electron microscope observations of the electrode surface confirmed the existence of a protective adsorbed film of the inhibitor on the electrode surface.     

Green approach to corrosion inhibition of mild steel in hydrochloric acid medium using extract of spirogyra algae

In the present investigation, a fresh water green algae spirogyra is used as an inexpensive and efficient mild steel corrosion inhibitor. The study is carried out in 0.5?M HCl solution using weight loss measurements, scanning electron microscopy–energy-dispersive X-ray spectroscopy, X-ray diffraction, and Fourier transforms infrared (FT-IR) techniques. The maximum inhibition efficiency was found to be 93.03% at 2?g?L^?1. The adsorption of extract of spirogyra on mild steel surface obeys the Langmuir adsorption isotherm. Corrosion inhibition mechanisms were inferred from the temperature dependence of the inhibition efficiency as well as from calculation of thermodynamic and kinetic parameters which direct the process. FT-IR analysis of green algae spirogyra revealed the presence of hydroxyl, amino, and carbonyl groups, which are responsible for the adsorption on the mild steel surface. SEM analysis supported the inhibitive action of the spirogyra extract against the mild steel corrosion in acid solution.     

Corrosion inhibition and adsorption properties of Azadirachta indica mature leaves extract as green inhibitor for mild steel in HNO3

Abstract

The corrosion inhibition and adsorption properties of Neem (Azadirachta indica – AZI) mature leaves extract as a green inhibitor of mild steel (MS) corrosion in nitric acid (HNO₃) solutions have been studied using a gravimetric technique for experiments conducted at 30 and 60°C. The results disclose that the different concentrations of the AZI extract inhibit MS corrosion and that inhibition efficiency of the extract varies with concentration and temperature. For extract concentrations studied and ranging from 9.09 to 28.57 mg/L, the maximum inhibition efficiency was 80.5 and 80.07% both at 28.57 mg/L AZI at 30 and 60°C, respectively, in 2.0 N HNO₃. The adsorption of the inhibitor on the MS surface was exothermic and consistent with the physical adsorption mechanism, best described by the Frumkin adsorption isotherm.     

Extract sarampa wood (Xylocarpus Moluccensis) as an eco-friendly corrosion inhibitor for mild steel in HCl 1M

Plant extracts are currently being used as eco-friendly corrosion inhibitors. In this study, the inhibitive performance of Xylocarpus Moluccensis extract (XME) was used as an eco-friendly corrosion inhibitor for the first time. The extract was studied using electrochemical measurement on mild steel in 1M HCl. Results from FIR and phytochemical confirmed that Xylocarpus Moluccensis extract contains compound hydroxyl group, phenolic, and flavonoid content which can be used as a corrosion inhibitor. The inhibition efficiency was determined using Tafel polarization and electrochemical impedance spectroscopy and showed 68% efficiency in 500 ppm. Langmuir adsorption isotherm was used to determine the adsorption mechanism of XME. Surface characterization (AFM) was also used to study the surface morphology of protective film inhibitors.     

Hydroclathrus clathratus marine alga as a green inhibitor of acid corrosion of mild steel

The corrosion inhibitive and adsorption behaviors of Hydroclathrus clathratus on mild steel in 1 M HCl and 1 M H₂SO₄ solutions at 303, 313 and 323 K were investigated by weight loss, electrochemical, and surface analysis techniques. The results show that H. clathratus acts as an inhibitor of corrosion of mild steel in acid media. The inhibition efficiency was found to increase with increase in inhibitor concentration but to decrease with rise in temperature, suggestive of physical adsorption. The adsorption of the inhibitor onto the mild steel surface was found to follow the Temkin adsorption isotherm. The inhibition mechanism was further corroborated by the results obtained from electrochemical methods. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) analyses supported the inhibitive action of the alga against acid corrosion of mild steel.     

Anticorrosive property of Spiraea Cantoniensisis extract as an eco-friendly inhibitor on mild steel surface in acid medium

Abstract

The inhibitive performance of methanolic extract of eco-friendly green inhibitor Spiraea cantoniensis (S. cantoniensis) on inhibiting corrosion of mild steel (MS) in 1?M HCl was studied by weight loss, AC-impedance, Fourier transform infrared spectroscopy (FT-IR), Raman, x-ray diffraction (XRD), ultraviolet-visible (UV-Vis), atomic absorption spectroscopy (AAS), and scanning electron microscopy (SEM) analysis. The results showed that the corrosion rate significantly decreased in the presence of the S. cantoniensis inhibitor with a gradual increase in inhibition efficiency at an increased inhibitor concentration. The temperature studies were conducted which included activation energy (E_a), change in enthalpy (ΔH°_ads), change in entropy (ΔS°_ads), change in free energy (ΔG°_ads) and heat of adsorption (Q_ads). These calculations were helpful to determine the reaction mechanism and proved it as a physisorption type following the Langmuir adsorption isotherm. The analysis of the protective film using FT-IR, Raman, XRD, and SEM analysis clearly showed the potentiality of S. cantoniensis in blocking the MS surface to prevent corrosion by 1?M HCl. The solution analysis via AAS and UV-Vis showed the inhibitive effect of the inhibitor (S. cantoniensis) in both inhibitive and the uninhibitive solution exhibiting the adsorption of the phytochemical molecules on the MS surface.     

Influence of pyridazine derivative on corrosion inhibition of mild steel in acidic media

The inhibition behavior of 6-methyl-4,5-dihydropyridazin-3(2H)-one (MDP) on corrosion of mild steel in 1 M HCl and 0.5 M H₂SO₄ was investigated using weight loss, potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS) measurements. The results indicated that the corrosion inhibition efficiency depends on concentration, immersion time, solution temperature, and the nature of the acidic solutions. It is also noted that MDP is at its the most efficient in 1 M HCl and least in 0.5 M H₂SO₄. The effect is more pronounced with MDP concentration. It is found that the inhibition efficiency attains 98 % at 5 × 10^?3 M in 1 M HCl and 75 % at 5 × 10^?2 in 0.5 M H₂SO₄. Polarization measurements showed that the MDP acts as a mixed inhibitor. EIS diagrams showed that the adsorption of MDP increases the transfer resistance and decreases the capacitance of the interface metal/solution. From the temperature studies, the activation energies in the presence of MDP were found to be superior to those in uninhibited medium. Finally, a mechanism for the adsorption of MDP was proposed and discussed.     

Inhibition of acid corrosion of carbon steel using aqueous extract of olive leaves

The inhibitive action of the aqueous extract of olive (Olea europaea L.) leaves toward the corrosion of C-steel in 2 M HCl solution was investigated using weight loss measurements, Tafel polarization, and cyclic voltammetry. It was found that the extract acts as a good corrosion inhibitor for the tested system. The inhibition efficiency increases with increasing extract concentration. The inhibitive action of the extract is discussed with a view to adsorption of its components onto the steel surface, making a barrier to mass and charge transfer. The adsorption of extract components onto the steel surface was found to be a spontaneous process and to follow the Langmuir adsorption isotherm. It was found also that such adsorption increases the activation energy of the corrosion process. The results of cyclic voltammetry showed that the presence of olive extract decreases the charge density in the transpassive region. The inhibition efficiency is greatly reduced as the temperature is increased.     

Influence of bis-(2-benzothiazolyl)-disulfide on corrosion inhibition of mild steel in hydrochloric acid media

The inhibiting behavior of bis-(2-benzothiazolyl)-disulfide on mild steel corrosion was evaluated in 1?M HCl solution. Weight loss, potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS) techniques were used in this study. In EIS technique, by performing Kramers–Kronig transformations, the experimental results validated, before fitting any theoretical model on them. The obtained results showed that the inhibition efficiency (%IE) increases by increasing the concentration of bis-(2-benzothiazolyl)-disulfide up to 2.02?×??0^???M (%IE?～??2??8). Between the results obtained from various used techniques, a good agreement was found. Polarization curves indicate that the inhibition of the inhibitor is a mixed anodic–cathodic nature and Langmuir isotherm is found as an accurate isotherm describing the adsorption behavior. It also found that its inhibition mechanism of bis-(2-benzothiazolyl)-disulfide is at the interval of physical adsorption and chemical binding. The inhibition efficiency of the inhibitor decreased by rising of temperature in the range of 25??5?°C and these results, verified adsorption behavior of the inhibitor.     

Inhibitory action of aqueous Ruellia Tuberosa L leaves extract on the corrosion of copper in HCl solution

The inhibitive action of the aqueous extract of Ruellia tuberosa L (ART) on the corrosion of copper in 0.5 ​M HCl was investigated. The inhibition efficiency increased with the extract concentration, acid concentration, as well as increasing the temperature. The Polarization studies revealed that the ART act as a mixed-type inhibitor. Based on the analysis of electrochemical impedance spectroscopy, an equivalent circuit is suggested. The adsorption of the inhibitor ART on the copper surface obeyed the Langmuir adsorption isotherm. From the results of scanning electron microscopy, Fourier transform infrared spectroscopy, and energy-dispersive X-ray spectroscopy the adsorption of ART on the copper surface is confirmed.     

Electrochemical investigation of corrosion and corrosion inhibition of iron in hydrochloric acid solutions

The inhibition effect of 1-methyl pyrazole (MPA) on the acidic corrosion of iron in 1.0 M HCl was studied at different concentrations (10^?3–10^?2 M) by potentiodynamic polarization and electrochemical impedance spectroscopy, and EIS measurements. It is found from the polarization studies that methyl pyrazole (MPA) behaves mainly as anodic inhibitor in HCl. Values of polarization resistance (R_p) and double layer capacitance (C_dl) in the absence and presence of MPA in 1.0 M HCl are determined. The adsorption of MPA on iron surface from HCl is found to obey Temkin adsorption isotherm.     

Study on the Inhibition of Mild Steel Corrosion by Cationic Gemini Surfactant in 1 M HCl

The cationic gemini surfactant 1,2-bis(N-tetradecyl-N,N-dimethylammonium)ethane dibromide (14-2-14) was synthesized using a previously described method. The surfactant was characterized using ¹H NMR. The corrosion inhibition effect of 14-2-14 on mild steel in 1 M HCl at temperatures 30–60°C was studied using weight loss measurements, potentiodynamic polarization measurements and electrochemical impedance spectroscopy. Morphology of the corroded mild steel specimens was examined using scanning electron microscopy (SEM). The results of the studies show that gemini surfactant is an efficient inhibitor for mild steel corrosion in 1 M HCl; the maximum inhibition efficiency (IE) of 98.06% is observed at surfactant concentration of 100 ppm at 60°C. The %IE increases with the increasing inhibitor concentration and temperature. The adsorption of inhibitor on the mild steel surface obeys Langmuir adsorption isotherm. SEM studies confirmed smoother surface for inhibited mild steel specimen.     

Effect of polyacrylic acid on the corrosion behaviour of aluminium in sulphuric acid solution

Electrochemical techniques using both ac and dc as well as surface analyses approach were used to investigate the corrosion inhibition characteristics of polyacrylic acid (PAA) for pure cast aluminium in 0.5 M H₂SO₄ at 30 ± 1 °C. The effect of iodide ion additives was also studied. The results obtained indicate that PAA inhibited the corrosion of pure cast aluminium in the acid medium by adsorption onto the metal surface following Frumkin adsorption isotherm model. Inhibition efficiency increases with an increase in PAA concentration and synergistically enhanced by the addition of iodide ions. A mixed inhibition mechanism is proposed for the inhibitive effects of PAA as revealed by potentiodynamic polarisation technique. Synergism parameter evaluated was found to be greater than unity, indicating that the enhanced inhibition efficiency of PAA on addition of iodide ions was synergistic in nature. Fourier transform infrared analyses revealed that the synergistic effect of iodide ions and PAA is due to co-adsorption of iodide ions and PAA molecules which is cooperative in nature.     

Corrosion inhibition of aluminum in 1 M HCl by novel pyrimidine derivatives,EFM measurements,DFT calculations and MD simulation

Four pyridine-pyrimidine derivatives, namely pyridine-2,6-diamine (PD), pyrimidine-2-amine (PA), 6-amino-3,4-dihydropyrimidine-2(1H)-thione (ADT) and ethyl (R)-6-(4-chlorophenyl)-2-mercapto-4-methyl-1,6-dihydropyrimidine-5-carboxylate (EMMD) are used as effective inhibitors for aluminum corrosion in 1 M HCl solution. The anti-corrosive potential of these heterocyclic compounds has been evaluated by electrochemical frequency modulation (EFM) method, The inhibition efficiency of these inhibitors was strongly associated to the concentration (10^?7–10^?3M) and the structure of the molecules; reached a maximum of 95.68% for EMMD at 10^?3 M owing to more anchoring functional groups. The effect of temperature on the corrosion behaviour was assessed at solution temperature range 298–323 K. The four inhibitors adsorbed according to the Langmuir’s adsorption isotherm. Thermodynamic activation parameters for the dissolution process of aluminum in 1 M HCl and inhibited solutions were calculated and discussed. Surface analysis (SEM, EDX, and AFM) confirmed the formation of a protective layer adsorbed on the aluminum surface. In addition, theoretical studies by DFT and MD revealed the correlation between the molecular chemical structure of studied inhibitors and their inhibition efficiency. The adsorption mechanism is revealed by theoretical calculations.