Vibrational sum-frequency generation (VSFG) spectra of n-alkyltrichlorosilanes chemisorbed on quartz plate

Organic thin films prepared by chemical adsorption of n-alkyltrichlorosilanes (CH₃(CH₂)_mSiCl₃; m=6,7,13,17,18) on quartz plates were investigated by vibrational sum-frequency generation (VSFG) spectroscopy. The vibrational resonances by CH stretch bands of methyl and methylene groups were examined taking advantage of the fact that the bands associated with methylene groups in the trans conformation do not contribute to the VSFG signal. The density of adsorbed molecules and that of all-trans conformational sequences of alkyl chains decreased when the substrates were pretreated by oxygen plasma indicating the depletion of surface hydroxyls, which are the adsorption sites. The g-t conformation sequences on the plasma-treated substrates were found to increase by the length of the alkyl chain and the total number of gauche conformations exceeded that of adsorbed molecules when the number of CH₂ groups in an alkyl chain is around 8.     

Preparation of piperazine-grafted amine-functionalized UiO-66 metal organic framework and its application for CO<Subscript>2</Subscript> over CH<Subscript>4</Subscript> separation

UiO-66 amine functionalized was synthesized by solvothermal method. Post-synthetic modification of UiO-66-NH₂ with piperazine, a known promoter to enhance the chemisorption rate of CO₂ uptake, was carried out and analyzed to understand its crystalline structure, morphology and porous structure. Results show that piperazine is an effective agent for enhancing the capacity of absorption of CO₂. This porous product exhibits an improved CO₂ uptake at pressures up to 3000 kPa via physisorption and chemisorption mechanisms. The CH₄ adsorption and desorption isotherms on UiO-66, UiO-66-NH₂ and pip-UiO-66-NH₂ at temperature of 298.15 K and pressures ranging from 0 to 5000 kPa were carried out. IAS theory for a mixture of 0.05 bar CO₂, 0.85 bar CH₄ and 0.1 bar other gas revealed a selectivity factor of 19.09 for CO₂/CH₄ from pip-UiO-66-NH₂. Results show that these materials are effective adsorbents for CO₂ and CH₄ uptakes.     

Adsorption behaviors of CO<Subscript>2</Subscript> and CH<Subscript>4</Subscript> on zeolites JSR and Na<Subscript>n</Subscript>JSR using the GCMC simulations

The adsorption behaviors of CO₂ and CH₄ on new siliceous zeolites JSR and Na_nJSR (n = 2, 8, 16) were simulated using the Grand Canonical Monte Carlo method. The adsorption isotherms of CO₂ became higher with an increase in the Na⁺ number at a low pressure range (<150 kPa), whereas the isotherms showed a crossover with increasing pressure and the adsorption amount became smaller at a high pressure range (>850 kPa). With an increase in Na⁺ number, the pore volume decreased as the pore space was occupied by increasing Na⁺ ions. Additionally, two energy peaks on the interaction energy curves implied that CO₂ was adsorbed on two active sites. On the other hand, the adsorption amount of CH₄ decreased with an increase in the Na⁺ number and only one energy peak was observed. Adsorption isotherms were well fitted with the Langmuir and Freundlich equations up to 1000 kPa and the adsorption affinity of CO₂ on Na₁₆JSR zeolite was highest. The adsorption capacities of CO₂ in the studied zeolites were up to 38 times higher than those of CH₄. Diffusion constants of CO₂ and CH₄ decreased with an increase in the adsorbed amount and Na⁺ number. Considering the adsorbed amount, adsorption selectivity and affinity, zeolites JSR with a low Na⁺ number (JSR and Na₂JSR) is a good candidate for a pressure swing adsorption in the separation of CO₂/CH₄ mixture whereas JSR zeolites with high Na⁺ ratios (Na₁₆JSR and Na₈JSR) may be a better selection for a vacuum swing adsorption.     

Polymer swelling. XXV. Structure‐affinity correlation studies that involve poly(styrene‐co‐divinylbenzene) exposed to acetylenic liquids

The adsorption parameters (α) established for the monosubstituted acetylenic liquids in this investigation are consistent with expectation based on analogies with the log α_f = log α_i ‐ D_s(N_f − N_i) relationships reported earlier for the many homologous series of liquids ZR, in which Z is a functional group having strong affinity for the pendent phenyl group of polystyrene and R is an alkyl substituent that is varied systematically. The order of relative Z‐affinities, based on α for the respective ZCH₂CH₃ molecules, confirm that the nature of Z is the major factor that affects α and that electronic and steric contributions from R are modifying effects, which are reflected in D_s. Comparisons of the results observed for HCC(CH₂)_nZ′ liquids with those for HCC(CH₂)_nH and with analogous pairs of Z(CH₂)_nZ′ series confirm that Z′ at the other end of the polymethylene chain can have a moderate positive effect or a marked negative effect on α, depending on whether the mode of adsorption to pendent phenyl groups is mono‐ or bidentate. This study also confirms that a sharp reversal in the roles played by the molecules participating in the adsorption process occurs when all of the hydrogen atoms covalently bonded to the center of unsaturation are replaced by alkyl substituents. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2611–2633, 1999     

The influence of the size and position of the alkyl groups in alkylimidazole molecules on their acid‐base properties

Dissociation constants of HL⁺ acids, where L stands for 1‐alkylimidazole, 1‐alkyl‐2‐methylimidazole, 1‐alkyl‐2‐ethylimidazole, 1‐alkyl‐2‐propylimidazole, 1‐alkyl‐4‐methylimidazole and 1‐alkyl‐2‐ethyl‐4‐methylimidazole, were determined potentiometrically. For each of the homologous series of these bases, a relationship has been derived between the pK_a value and the number of carbon atoms in the hydrocarbon group for (CH₂)_n ≤ 13. The basicity of the alkylimidazoles has been found to increase linearly with increasing carbon chain length. The slopes of straight plots of pK_a = f(n_CH2) have been found to increase with increasing basicity of homologous series of the alkylimidazoles.     

The Reactions of Two New Alkoxy-silyl Functionalized Alkynes with M<Subscript>3</Subscript>(CO)<Subscript>12</Subscript> {M = Fe,Ru} and Co<Subscript>2</Subscript>(CO)<Subscript>8</Subscript>. Spectroscopic Identification of the Products

The new alkoxysilyl-functionalized alkynes [HC≡CCH₂N(H)C(=O)N(H)(CH₂)₃Si(OEt)₃] and [HC≡C(C₆H₄)–N(H)C(=O)N(H)(CH₂)₃Si(OEt)₃] have been synthesized using literature methods. These have been reacted with Fe₃(CO)₁₂, Ru₃(CO)₁₂ and Co₂(CO)₈. With the iron carbonyl only decomposition was observed: with Ru₃(CO)₁₂ splitting of the alkynes into their parent components and formation of the complexes (μ-H)Ru₃(CO)₉[HC=N(CH₂)₃Si(OEt)₃], (μ-H)Ru₃(CO)₉[C–C(C₆H₄)NH₂] and (μ-H)₂Ru₃(CO)₉[HC–CCH₃] occurred. Finally, with Co₂(CO)₈ formation of complexes Co₂(CO)₆(HC₂R) R=(C₆H₄)NH₂, CH₂NH(CO)NH(CH₂)₃Si(OEt)₃, (C₆H₄)NH(CO)NH(CH₂)₃Si(OEt)₃ containing the intact alkynes could be obtained.     

Assembly of succinic acid and isoxazolidine motifs in a single entity to mitigate CO2 corrosion of mild steel in saline media

Inhibition of CO₂ corrosion of mild steel in 0.5 M NaCl under atmospheric pressure at 40 °C as well as high pressure (10 bar) at 120 °C by 2-[2-methyl-4(or 5)-alkylisoxazolidin-5(or 4)-yl)methyl]succinic acids, a new class of molecules having inhibitive motifs of succinic acid, isoxazolidine and hydrophobic alkyl chain assembled in a single entity, has been examined by gravimetric and electrochemical methods. Inhibitor molecule containing CH₃(CH₂)₈ outperformed its counterpart with a shorter hydrophobe CH₃(CH₂)₄ and two other commercial imidazoline-based inhibitors. The effectiveness of these new inhibitors was also evaluated by electrochemical impedance spectroscopy. The inhibition efficiency by EIS was found to be 75%, 91% and 98% in the presence of 1, 5 and 20 ppm, respectively, at 40 °C. The potentiodynamic polarization studies indicated that the new inhibitors act as anodic inhibitors. The adsorption of the synthesized inhibitors follows Temkin adsorption isotherm model with favorable high values of –ΔG°_ads and −ΔH°_ads pointing the inhibitors adsorbed on the metal surface by chemisorption process. The XPS study confirmed the adsorption of the inhibitors on the metal surface.     

Theoretical studies on the pentacoordinate silylenoid PhCH<Subscript>2</Subscript>(NH<Subscript>2</Subscript>)CH<Subscript>3</Subscript>SiLiF

The structures of pentacoordinate silylenoid PhCH₂(NH₂)CH₃SiLiF were studied by density functional theory at the B3LYP/6-31G(d) level. Three equilibrium structures, the three-membered ring (1), the p-complex (2), and the σ-complex (3) structures, were located. Their energies are in the order of 2 > 1 > 3 both in vacuum and in THF. To exploit the stability of PhCH₂(NH₂)CH₃SiLiF, the insertion reactions of 1 and PhCH₂(NH₂)CH₃Si into C–F have been investigated, respectively. The results show that the insertion of PhCH₂(NH₂)CH₃Si is more favorable. To probe the influence of amine-coordination to the stability of PhCH₂(NH₂)CH₃SiLiF, the insertion reaction of PhCH₃CH₃SiLiF was also investigated. The calculations indicate that the insertion of PhCH₃CH₃SiLiF is more favorable than that of 1. So the N atom plays an important role on the stability of silylenoid PhCH₂(NH₂)CH₃SiLiF.     

Adsorption equilibria of CO<Subscript>2</Subscript> and CH<Subscript>4</Subscript> in cation-exchanged zeolites 13X

Ion-exchange with different cations (Na⁺, NH₄ ⁺, Li⁺, Ba²⁺ and Fe³⁺) was performed in binderless 13X zeolite pellets. Original and cation-exchanged samples were characterized by thermogravimetric analysis coupled with mass spectrometry (inert atmosphere), X-ray powder diffraction and N₂ adsorption/desorption isotherms at 77 K. Despite the presence of other cations than Na (as revealed in TG-MS), crystalline structure and textural properties were not significantly altered upon ion-exchange. Single component equilibrium adsorption isotherms of carbon dioxide (CO₂) and methane (CH₄) were measured for all samples up to 10 bar at 298 and 348 K using a magnetic suspension balance. All of these isotherms are type Ia and maximum adsorption capacities decrease in the order Li > Na > NH₄–Ba > Fe for CO₂ and NH₄–Na > Li > Ba for CH₄. In addition to that, equilibrium adsorption data were measured for CO₂/CH₄ mixtures for representative compositions of biogas (50 % each gas, in vol.) and natural gas (30 %/70 %, in vol.) in order to assess CO₂ selectivity in such scenarios. The application of the Extended Sips Model for samples BaX and NaX led to an overall better agreement with experimental data of binary gas adsorption as compared to the Extended Langmuir Model. Fresh sample LiX show promise to be a better adsorption than NaX for pressure swing separation (CO₂/CH₄), due to its higher working capacity, selectivity and lower adsorption enthalpy. Nevertheless, cation stability for both this samples and NH₄X should be further investigated.     

Structure of palladium(I) carbonylcarboxylate clusters [Pd<Subscript>2</Subscript>(CO)<Subscript>2</Subscript>(RCOO)<Subscript>2</Subscript>]<Subscript><Emphasis Type="Italic">n</Emphasis></Subscript> in solution: NMR and IR study

The structures of palladium carbonylcarboxylate clusters [Pd₂(CO)₂(RCOO)₂] _n (n = 2, R = CH₃, CH₂Cl, CF₃, n = 3, R = CMe₃, CHMe₂, n-C₅H₁₁) are studied in benzene and tetrahydrofuran solutions by IR and ¹H and ¹³C NMR spectroscopy. The clusters in the solid state have a planar cyclic metal framework with pairs of the carbonyl and carboxylate ligands alternately coordinated on its sides. In solutions, compounds under consideration contain one-type carbonyl ligands and one-type carboxylate ligands; their structures are similar to thaso in the solid state.     

Monocyclopentadienyl titanium(IV) alkyl xanthate complexes

Titanium(IV) alkyl xanthates of the types CpTi(S₂COR)Cl₂, CpTi(S₂COR)₂Cl and CpTi(S₂COR)₃, where R = CH₃, C₂H₅, C₃H₇, C₄H₉ and C₅H₁₁, have been prepared by the reaction of monocyclopentadienyl titanium(IV) trichloride with potassium alkyl xanthates in anhydrous dichloromethane. Conductance and infrared studies suggest that these complexes are non-electrolytes in which all of the xanthate ligands are bidentate. Proton nmr spectra of these complexes indicate that there is rapid rotation of the cyclopentadienyl ring about the metal-ring axis and for the CpTi(S₂COR)₃ complexes non-equivalence of the alkylxanthate ligands was observed.     

Organic-inorganic hybrid perovskite (C<Subscript>6</Subscript>H<Subscript>5</Subscript>(CH<Subscript>2</Subscript>)<Subscript>2</Subscript>NH<Subscript>3</Subscript>)<Subscript>2</Subscript>CdCl<Subscript>4</Subscript>: Synthesis,structural and thermal properties

The present research work reports the study on crystal structure, vibrational spectroscopy and thermal analysis of organic-inorganic hybrid compound (C₆H₅(CH₂)₂NH₃)₂CdCl₄. Single crystals of bis(phenethylammonium)tetrachlorocadmate (C₆H₅(CH₂)₂NH₃)₂CdCl₄ (PEA–Cd) were obtained by diffusion at room temperature. This compound crystallizes in the orthorhombic space group C2cb with unit cell parameters a = 7.4444(2) Å, b = 38.8965(3) Å, c = 7.3737(2) Å and Z = 4. Single crystal structure has been solved and refined to R = 0.036 and wR = 0.092. The structure consists of an extended [CdCl₄]^2– network and two [C₆H₅(CH₂)₂NH₃]⁺ cations to form a two-dimensional perovskite system. The infrared (IR) spectrum of the title compound was recorded at room temperature. Differential scanning calorimetry (DSC) was used to investigate the phase transition; this compound exhibits a reversible single solid-solid phase transition.     

Green,purple, blue — [Cu(N-Methylimidazole)<Subscript>n</Subscript> (OOCCH<Subscript>3</Subscript>)<Subscript>2</Subscript>]<Subscript>m</Subscript>, what is in a colour

Starting from the paddlewheel complex copper(II)acetate, the green N-methylimidazole adduct of copper(II)acetate is formed and transformed into the monomeric and dimeric N-methylimidazole adducts of copper(II)acetate [Cu(C₄H₆N₂)₂(CH₃COO)₂]_n·xH₂O (n = 1,2; x = 0, 6). The formation of the blue dimer or the purple monomer depends on the solvent and the presence or absence of water.     

Ethylene/ethane separation by CuCl/AC adsorbent prepared using CuCl<Subscript>2</Subscript> as a precursor

Activated carbon (AC) supported CuCl (CuCl/AC) for ethylene/ethane separation has been prepared with CuCl₂ as precursor by a solid-state dispersion method. The samples are characterized by inductively coupled plasma optical emission spectrometry, X-ray diffraction, N₂ adsorption/desorption and X-ray photoelectron spectroscopy, and investigated for ethylene (C₂H₄) and ethane (C₂H₆) adsorptions. The characterization results reveal that CuCl₂ supported on AC can be highly dispersed on the surfaces of AC support and completely converted to CuCl after activation at 543 K in N₂. The resultant adsorbent displays high ethylene adsorption capacity, high C₂H₄/C₂H₆ adsorption selectivity and excellent reversibility. The adsorption isotherms of ethylene and ethane on CuCl/AC at temperatures up to 333 K can be well fitted by the Sips models, and the corresponding isosteric heats of adsorption are calculated from the Clausius–Clapeyron equation. The value of isosteric heat of adsorption suggests that the interaction of ethylene with CuCl/AC is between physisorption and chemisorption.     

Ionic Transformations in Extremely Nonpolar Fluorous Media: Easily Recoverable Phase‐Transfer Catalysts for Halide‐Substitution Reactions

Solutions of the fluorous alkyl halides R_f8(CH₂)_mX (R_fn=(CF₂)_n?1CF₃; m=2, 3; X=Cl, Br, I) in perfluoromethylcyclohexane or perfluoromethyldecalin are inert towards solid or aqueous NaCl, NaBr, KI, KCN, and NaOAc. However, halide substitution occurs in the presence of fluorous phosphonium salts (R_f8(CH₂)₂)(R_f6(CH₂)₂)₃P⁺X^? (X=I ( 1 ), Br ( 3 )) and (R_f8(CH₂)₂)₄P⁺I^? (10 mol %), which are soluble in the fluorous solvents under the reaction conditions (76–100 °C). Stoichiometric reactions of a) 1 with R_f8(CH₂)₂Br and b) 3 with R_f8(CH₂)₂I were conducted under homogenous conditions in perfluoromethyldecalin at 100 °C and yielded the same R_f8(CH₂)₂I/R_f8(CH₂)₂Br equilibrium ratio (≈60:40). This shows that ionic displacements can take place in extremely nonpolar fluorous phases and suggests a classical phase‐transfer mechanism for the catalyzed reactions. Interestingly, the nonfluorous salt (CH₃(CH₂)₁₁)(CH₃(CH₂)₇)₃P⁺I^? ( 4 ) also catalyzes halide substitutions, but under triphasic conditions with 4 suspended between the lower fluorous and upper aqueous layers. NMR experiments established very low solubilities in both phases, which suggests interfacial catalysis. Catalyst 1 is easily recycled, optimally by simple precipitation onto teflon tape.     

Near-infrared spectroscopy as an effective tool for monitoring the conformation of alkylammonium surfactants in montmorillonite interlayers

Application of near-infrared (NIR) spectroscopy to probing the arrangement of trimethylalkylammonium cations in montmorillonite interlayers has been demonstrated. Detailed analysis of the mid-IR (MIR) and NIR spectra of montmorillonite from Jelšový Potok (JP, Slovakia) saturated with surfactants with varying alkyl chain length (even numbers of carbon atoms from C6 to C18) was performed to show the advantages of the NIR region in characterizing surfactant conformations. The position of the ν_as(CH₂), (∼2930–2920 cm⁻¹), ν_s(CH₂) (∼2860–2850 cm⁻¹), 2ν_as(CH₂) (∼5810–5785 cm⁻¹), (ν + δ)_as(CH₂) (∼4340–4330 cm⁻¹) and (ν + δ)_s(CH₂) (∼4270–4250 cm⁻¹) signals was used as an indicator of the gauche/trans conformer ratio. For all bands, a shift toward lower wavenumber on increasing the alkyl chain length from 6 to 18 carbons suggests a transition from disordered liquid-like to more ordered solid-like structures of the surfactants. The magnitude of the shift was significantly higher for 2ν_as(CH₂) (28 cm⁻¹) than for ν_as(CH₂) (8 cm⁻¹) or ν_s(CH₂) (10 cm⁻¹), showing the NIR region to be a useful tool for examining this issue. Comparison of the IR spectra of crystalline alkylammonium salts and the corresponding organo-montmorillonites demonstrated a confining effect of montmorillonite layers on surfactant ordering. For each alkyl chain length the CH₂ bands of the organo-montmorillonites appeared at higher wavenumbers than for the unconfined surfactant, thus indicating a higher disorder of the alkyl chains. The wavenumber difference between corresponding samples was always higher in the NIR than in the MIR region. All these findings show NIR spectroscopy to be useful for conformational studies.     

Role of the concentration and nature of grafted groups in the adsorption of hydrocarbon vapors on silica modified by monofunctional polyfluoroalkylsilanes

The role of the grafting density of monofunctional polyfluoroalkylsilanes of the C _n F_{2n − 1}(CH₂) _m Si(CH₃)₂Cl general formula (where n = 3, 4, and 6; and m = 2 and 3) and their composition in intermolecular interactions of the molecules of saturated and aromatic hydrocarbons with a surface of chemically modified silica is studied by means of IR spectroscopy and adsorption-static and gas chromatography. It is shown that the higher the concentration and the shorter the length of the grafted chain, the greater (by a factor of 2 to 25) the drop in the adsorption values of hydrocarbons as a result of modifications, due to an increase in the degree of oleophobization of surface upon the formation of polyorganofluorine coatings. The high specificity of the surface with respect to benzene, which is due to the active participation of the polar fragment of a grafted chain in adsorption process, is related to the features of a relatively low-density sample with a concentration of grafted perfluorobutyl groups of 1.7 nm⁻². It is shown that the thermodestruction of polyfluoroalkyl silica remains virtually unobserved upon heating to 523 K in an argon flow.     

Solid-state chlorodecarboxylation of mono- and dicarboxylic acids with the Pb(OAc)<Subscript>4</Subscript>-MCl system

Solid state reactions of acids RCOOH (R = n-C₇H₁₅, BuC(Et)H, n-C₉H₁₉, PhCH₂, PhCH₂CH₂, H₂C=CH(CH₂)₈, or MeOOC(CH₂)₃) with Pb(OAc)₄ combined with KCl, NaCl, CdCl₂, or NH₄Cl in the absence of a solvent and without mechanical activation afford chlorohydrocarbons RCl. The corresponding reactions of acids HOOC(CH₂)_nCOOH (n = 3–6) give dichloroalkanes Cl(CH₂)_nCl and γ-butyrolactone (n = 3).__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2105–2109, October, 2004.     

Influence of activated carbon in zeolite X/activated carbon composites on CH<Subscript>4</Subscript>/N<Subscript>2</Subscript> adsorption separation ability

A series of zeolite X/activated carbon composites with different ratio of zeolite X and activated carbon were prepared, which were adjusted by adding solid pitch powder and silicon dioxide as additional carbonaceous and silica source, respectively. The corresponding modified samples were obtained by treatment with the ammonium chloride solution. CH₄ and N₂ adsorption isotherms on all composites were determined within the pressure of 0–100 kPa at 298 K, and fitted with Henry model and Freundlich model. The results showed the adsorption separation abilities for CH₄ and N₂ were strongly influenced by activated carbon content, micropore structure and surface properties. The increase of activated carbon content increased the BET surface area, micropore surface area and micropore volume, leading to an enhanced CH₄ adsorption capacity and CH₄/N₂ adsorption selectivity. Compared with the unmodified composites, the modified composites showed higher CH₄/N₂ adsorption selectivity, and CH₄ adsorption capacity decreased slightly, which can be attributed to the reduction of the micropore structure parameters, the surface basic amount and basic strength. Furthermore, the modified composite HAX-3 presented the highest CH₄/N₂ selectivity of 3.4, and high CH₄ adsorption capacities, which is favorable for application in pressure swing adsorption processes.     

Study on chemisorption of H<Subscript>2</Subscript>, O<Subscript>2</Subscript>, CO and C<Subscript>2</Subscript>H<Subscript>4</Subscript>on Pt-Ag/SiO<Subscript>2</Subscript>catalysts by microcalorimetry and FTIR

Adsorption microcalorimetry has been employed to study the interaction of ethylene with the reduced and oxidized Pt-Ag/SiO₂catalysts with different Ag contents to elucidate the modified effect of Ag towards the hydrocarbon processing on platinum catalysts. In addition, microcalorimetric adsorption of H₂, O₂, CO and FTIR of CO adsorption were conducted to investigate the influence of Ag on the surface structure of Pt catalyst. It is found from the microcalorimetric results of H₂and O₂adsorption that the addition of Ag to Pt/SiO₂leads to the enrichment of Ag on the catalyst surface which decreases the size of Pt surface ensembles of Pt-Ag/SiO₂catalysts. The microcalorimetry and FTIR of CO adsorption indicates that there still exist sites for linear and bridged CO adsorption on the surface of platinum catalysts simultaneously although Ag was incorporated into Pt/SiO₂. The ethylene microcalorimetric results show that the decrease of ensemble size of Pt surface sites suppresses the formation of dissociative species (ethylidyne) upon the chemisorption of C₂H₄on Pt-Ag/SiO₂. The differential heat vs. uptake plots for C₂H₄adsorption on the oxygen-preadsorbed Pt/SiO₂and Pt-Ag/SiO₂catalysts suggest that the incorporation of Ag to Pt/SiO₂could decrease the ability for the oxidation of C₂H₄.