Spectral and chemical determination of copolymer composition of poly (butyl acrylate-co-glycidyl methacrylate) from emulsion polymerization

Batch emulsion polymerization was used for preparing poly(butyl acrylate-co-glycidyl methacrylate) with different copolymer compositions at 75 °C with potassium persulfate as an initiator. Solubility and gel content of the prepared copolymers were studied. Four different spectral (¹H-NMR and FTIR) and chemical (elemental analysis and titration) methods were used to determine the copolymer composition. The epoxy was used as a key functional group, particularly in FTIR and titration methods of quantification. Results obtained from the chemical methods showed good agreement with those of the spectral methods. Effects of some probable phenomena occurring during copolymerization were investigated to account for differences of data obtained from the different analytical methods. Finally, the methods were compared and ¹H-NMR and elemental analysis were recognized as preferred approaches for the copolymer composition determination.     

Effective dispersion of fullerene with methacrylate copolymer in organic solvent and poly(methyl methacrylate)

Dispersion of fullerene, C₆₀, by addition of polymethacrylate dispersant in methyl methacrylate (MMA) and incorporation of C₆₀ into poly(methyl methacrylate) (PMMA) were investigated. Copolymers synthesized by radical copolymerization of MMA and 2-naphthyl methacrylate (NMA), poly(MMA-co-NMA), effectively dispersed C₆₀ in MMA to form clusters of 20?nm. In these cases, addition of minimal 110 naphthyl groups per unit C₆₀ molecule afforded to give clusters with minimum of 20?nm sizes. Furthermore, block copolymers, poly(MMA-b-NMA) with MMA/NMA mole ratio from 12:1 to 20:1, also efficiently dispersed C₆₀ to give formation of clusters of 20?nm size by addition of minimal 40 naphthyl groups per unit C₆₀ molecule, which was corresponding to approximate nine layers of naphthyl group in block copolymer adsorbed on the surface of the cluster. Hybrid films of C₆₀/PMMA, prepared by casting of C₆₀-dispersed solution containing PMMA, exhibited absorbance at 400?nm linearly increased with C₆₀ content.     

Effect of ion content in ionomer on the ion conductivity of polymer electrolytes based on the P(MMA-co-LiMA)/PEG/LiCF3SO3 blend

We have prepared polymer electrolytes composed of poly(methyl methacrylate-co-lithium methacrylate) ionomer (P(MMA-co-LiMA)), low molecular weight PEG, and LiCF₃SO₃ salt. The ion groups in P(MMA-co-LiMA) could enhance the miscibility between the MMA units and PEG in the polymer electrolytes. This miscibility enhancement made the pathway of ion transport less tortuous, and consequently led to the increase in ion conductivity. The maximum ambient ion conductivities in these systems were measured to be in the range of 10⁻⁴–10⁻⁵ S/cm. The polymer electrolytes became transparent at the higher ion content owing to the enhanced miscibility. The mechanical stability of the polymer electrolytes was also improved through the introduction of ion groups into the PMMA. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 991–997, 1998     

Synthesis and characterization of poly (n-butyl acrylate)-poly (methyl methacrylate) latex interpenetrating polymer networks by radiation-induced seeded emulsion polymerization

A series of latex interpenetrating polymer networks (LIPNs) were prepared via a two-stage emulsion polymerization of methyl methacrylate (MMA) or mixture of MMA and n-butyl acrylate (n-BA) on crosslinked poly(n-butyl acrylate)(PBA) seed latex using ⁶⁰Co γ-ray radiation. The particles of resultant latex were produced with diameters between 150 and 250 nm. FTIR spectra identified the formation of crosslinked copolymers of PMMA or P(MMA-co-BA). Dynamic light scattering (DLS) showed that with increasing n-BA concentration in second-stage monomers, the particle size of LIPN increased. Transmission electron microscope(TEM) photographs showed that the morphology of resultant acrylate interpenetrating polymer network (IPN) latex varied from the distinct core-shell structure to homogenous particle structure with the increase of n-BA concentration, and the morphology was mainly controlled by the miscibility between crosslinked PBA seed and second-stage copolymers and polarity of P(MMA-co-BA)copolymers. In addition, differential scanning calorimeter (DSC) measurements indicated the existence of reinforced miscibility between PBA seed and P(MMA-co-BA)copolymer in prepared LIPNs.     

SYNTHESIS OF POLY(METHYL METHACRYLATE)-SILICA NANO-COMPOSITE

ABSTRACT

Transparent organic/pre-ceramic composite films of poly(methyl methacrylate) [PMMA] and perhydropolysilazane [PHPS] were synthesized by blending poly(methyl methacrylate-co-2-hydroxyethyl methacrylate) [P(MMA-co-HEMA)] random copolymers and PHPS. In the blend films, P(MMA-graft-PHPS) graft copolymers were formed, PMMA and PHPS were microscopically phase-separated in the solid state. Morphology of the microphase separation was investigated by transmission electron microscopy by changing HEMA content of the random copolymers and blend ratio of PHPS to HEMA. To convert PHPS to silica glass, the blend films were calcinated at 100°C. The morphology of the microphase separation of the films was not changed by the calcinations; the calcinated films were transparent. When the molar content of HEMA of P(MMA-co-HEMA) and the molar content of PHPS to HEMA in feed were 14.5% and 150%, respectively, the morphology was well ordered lamellae of PMMA and silica.     

Synthesis and characterization of a novel macromolecular surface modifier for polyethylene

A new macromolecular surface modifier, a copolymer of lauryl methacrylate (LMA) and poly(ethylene glycol) methyl methacrylate (PEGMA), was synthesized through free radical polymerization. The copolymer was characterized by nuclear magnetic resonance spectrum (1H-NMR) and thermogravimetric analysis (TGA). The copolymer was used to blend with polyethylene. The binary blends have been characterized by attenuated total reflection/Fourier transform infrared (ATR-FTIR), contact-angle measurements (CDA) and scanning electron microscopy (SEM). The results indicated that poly(ethylene glycol) methyl methacrylate-co-lauryl methacrylate (PEGMA-co-LMA) could diffuse preferably onto the surface of the polyethylene (PE) film, and thus can be used as an efficient surface modifier for PE.     

Organostibine mediated controlled/living random copolymerization of styrene and methyl methacrylate

The first example of organostibine mediated controlled/living random copolymerization of styrene (St) and methyl methacrylate (MMA) was achieved by heating a solution of St/MMA/organostibine mediator at 100 °C or St/MMA/organostibine mediator/AIBN with various monomer feed ratios at 60 °C. The addition of AIBN significantly decreased the reaction temperature and enhanced the rate of copolymerization. The structure of poly(St-co-MMA) was verified by ¹H NMR. The reactivity ratios at 60 °C were determined by the extended Kelen-Tüd?s method to be γ_St = 0.40 and γ_MMA = 0.44. The ln([M]₀/[M]) increased linearly with increasing reaction time. The number-average molecular weights of poly(St-co-MMA) increased linearly with conversion. Poly(St-co-MMA) with expected number-average molecular weight and low polydispersity index was formed. The living characteristic was further confirmed by chain-extension of poly(St-co-MMA) to form poly(St-co-MMA)-b-PMMA.     

Non-bioaccumulative, environmentally preferable stabilizer architectures for the dispersion polymerization of MMA in supercritical CO2

To overcome the environmental concerns associated with long-chain perfluorinated compounds, in this report, non-bioaccumulative, environmentally friendly stabilizer architectures based on short-chain fluorinated polymers have been designed for the dispersion polymerization of methyl methacrylate (MMA) in supercritical CO₂. Random copolymers composed of 2-(diisopropylamino)ethyl methacrylate (DPAEMA) and 2,2,3,3,4,4,4-heptafluorobutyl methacrylate (FBMA) or 2,2,3,3,4,4,5,5-octafluoropentyl methacrylate were prepared with various comonomer ratios and utilized as stabilizers. It was found that the copolymers effectively stabilized PMMA latexes in CO₂, leading to the formation of free-flowing, spherical PMMA particles. With increase in the concentration of the stabilizer poly(FBMA-co-DPAEMA) from 2% to 6% (w/w with respected to MMA), the particles diameter decreased from 3.02 to 1.0 μm.     

Microfluidic-directed assembly of uniform fluorescent supraballs from CdTe nanocrystals-loaded acrylosilane microemulsion

We report herein a facile approach of fabricating fluorescent supraballs from CdTe nanocrystals (NCs)-loaded acrylosilane microemulsion by a simple microfluidic strategy. Initially, core–shell acrylosilane microemulsion with poly(methylmethacrylate-co-butylacrylate-co-vinyltri(isopropoxy)silane) (poly (MMA-co-BA-co-VPS)) as the core and poly(methylmethacrylate-co-butylacrylate-co-vinyltri(isopropoxy)silane-co-acrylamide) (poly(MMA-co-BA-co-VPS-co-AM)) as the shell were synthesized by differential microemulsion polymerization. Subsequently, CdTe NCs were assembled with these acrylosilane microemulsion particles in the presence of N′-(ethylcarbonimidoyl)-N, N-dimethylpropane-1, 3-diaminemonohydrochloride. Eventually, we fabricated uniformly distributed fluorescent supraballs using the as-prepared CdTe-loaded acrylosilane microemulsion as the discontinuous phase, and methylsilicone oil as the continuous phase by means of a microfluidic device. These fluorescent supraballs display unique colors and favorable fluorescence, which might be useful in optoelectronic applications, such as fluorescent switches, light-emitting diode displays, and illuminations.     

Synthesis of ABABA pentablock copolymers via copper mediated living radical polymerisation

In this work, the syntheses of poly(butyl methacrylate-b-methyl methacrylate-b-butyl methacrylate) triblock copolymer and poly(methyl methacrylate-b-butyl methacrylate-b-methyl methacrylate-b-butyl methacrylate-b-methyl methacrylate) pentablock copolymers using copper mediated living radical polymerisation are reported. Living radical polymerisations were performed using the system Cu^IBr/N-(n-propyl)-2-pyridylmethanimine as catalyst in conjunction with a difunctional initiator, the 1,4-(2^′-bromo-2^′-methylpropionoto)benzene (1). The syntheses of poly(MMA), poly(BMA-b-MMA-b-BMA) and poly(MMA-b-BMA-b-MMA-b-BMA-b-MMA) are described in detail using ¹H NMR spectroscopy and size exclusion chromatography. The living behaviour and the blocking efficiency of these polymerisations were investigated in each case. Difunctional initiator, 1, based on hydroquinone was synthesised and fully characterised and subsequently used to give difunctional poly(methyl methacrylate) macroinitiators with molecular weights up to 54,000 g mol⁻¹ and polydispersity between 1.07 and 1.32; molecular weights were close to the theoretical values. The difunctional macroinitiators were used to reinitiate butyl methacrylate to give triblock copolymers of M_n between 17,500 and 45,700 g mol⁻¹. Polydispersities remained narrow below 25,000 g mol⁻¹ but broadened at higher masses. The difunctional triblock macroinitiators were subsequently used to reinitiate methyl methacrylate to give ABABA pentablock copolymers with M_n up to 37,000 g mol⁻¹ with polydispersity=1.13. Under certain conditions radical-radical reaction led to a broadening of polydispersity index.     

Dispersion polymerization of styrene in supercritical carbon dioxide using monofunctional perfluoropolyether and silicone-containing fluoroacrylate stabilizers

The free radical dispersion polymerization of styrene was carried out in supercritical carbon dioxide (scCO₂) using two different stabilizers. The polymerizations are performed in the presence of poly(heptadecafluorodecyl acrylate-co-tris(trimethylsilyloxy)silyllpropyl methacrylate) p(HDFDA-co-SiMA) and a commercially available carboxylic acid-terminated perfluoropolyether (Krytox^® 157FSL) as polymerization stabilizers. Dry, fine powdered spherical polystyrene particles were produced under optimised conditions. The resulting high yield of spherical and relatively uniform micron-size polystyrene particles were formed utilizing various amounts of p(HDFDA-co-SiMA) random copolymer. However, it was observed that Krytox^® 157FSL was not a good stabilizer as p(HDFDA-co-SiMA) for the dispersion polymerization of styrene. The particle diameter was shown to be dependent on the type of the stabilizer and the weight percent of the stabilizer added to the system. The effect of varying the concentrations of stabilizers and initiator, reaction time and reaction pressure upon the polymerization yield, molar mass and morphology of polystyrene have been investigated.     

Thermal transformation of water-dispersible magnetite nanoparticles

This paper presents a study on rapid hardening behaviors of β-C₂S by accelerated carbonation curing. β-C₂S cubes compacted at various molding pressures were subjected to different CO₂ concentration for accelerated carbonation curing. The CO₂ uptake and microstructure changes were analyzed by thermogravimetric analysis (TG), QXRD, FT-IR and MAS-NMR. The results indicated that CO₂ uptake was affected by molding pressure and CO₂ concentration seriously. TG analysis indicated that the carbonation reaction was rapid in the first hour. The carbonation degree reached 21.6% and giving a compressive strength of 85.7 MPa after 6 h carbonation in 99.9% CO₂ concentration. And it showed a much less carbonation degree in 20.0% CO₂. Calcite, vaterite and amorphous silica-rich phase formed in the carbonation progress. The FT-IR and NMR analysis indicated β-C₂S was decalcified to C–S–H gel and further decalcified to formation of an amorphous silica gel composed of Q ³ and Q ⁴ silicate tetrahedral. The chain length of C–S–H gel increased from to 2.67 to 6.36 with prolonged carbonation time, showing a lower C/S ratio and higher polymerization and also resulting in a lower C–S–H content.     

Synthesis of gradient copolymers with complexing groups by RAFT polymerization and their solubility in supercritical CO2

We report the synthesis of new gradient fluorinated copolymers with complexing groups and soluble in supercritical carbon dioxide (scCO₂). Poly(1,1,2,2‐tetrahydroperfluorodecyl acrylate‐co‐acetoacetoxyethyl methacrylate) (poly(FDA‐co‐AAEM)) and poly(1,1,2,2‐tetrahydroperfluorodecyl acrylate‐co‐vinylbenzylphosphonic acid diethylester) (poly(FDA‐co‐VBPDE)) gradient copolymers were synthesized by reversible addition fragmentation chain transfer polymerization in α,α,α‐trifluorotoluene. Poly(1,1,2,2‐tetrahydroperfluorodecyl acrylate‐co‐vinylbenzylphosphonic diacid) (poly(FDA‐co‐VBPDA)) gradient copolymer was efficiently obtained by cleavage of the phosphonic ester groups of poly(FDA‐co‐VBPDE). The cloud points of these gradient copolymers in dense CO₂ were measured in a variable volume view cell at temperatures between 25 and 65 °C. The gradient copolymers show very good solubility in compressed CO₂ with the decreasing order: poly(FDA‐co‐AAEM) ≈ poly(FDA‐co‐VBPDE) > poly(FDA‐co‐VBPDA). Following a green chemistry strategy, poly(FDA‐co‐AAEM) gradient copolymer was successfully synthesized in scCO₂ with a good control over number‐average molecular weight and composition. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5448–5460, 2009     

Synthesis of poly[(2‐oxo‐1,3‐dioxolane‐4‐yl) methyl methacrylate‐co‐ethyl acrylate] by incorporation of carbon dioxide into epoxide polymer and the miscibility behavior of its blends with poly(methyl methacrylate) or poly(vinyl chloride)

This study was related to the investigation of the chemical fixation of carbon dioxide to a copolymer bearing epoxide and the application of the cyclic carbonate group containing copolymer‐to‐polymer blends. In the synthesis of poly[(2‐oxo‐1,3‐dioxolane‐4‐yl) methyl methacrylate‐co‐ethyl acrylate] [poly(DOMA‐co‐EA)] from poly(glycidyl methacrylate‐co‐ethyl acrylate) [poly(GMA‐co‐EA)] and CO₂, quaternary ammonium salts showed good catalytic activity. The films of poly(DOMA‐co‐EA) with poly(methyl methacrylate) (PMMA) or poly(vinyl chloride) (PVC) blends were cast from N,N′‐dimethylformamide solution. The miscibility of the blends of poly(DOMA‐co‐EA) with PMMA or PVC have been investigated both by DSC and visual inspection of the blends. The optical clarity test and DSC analysis showed that poly(DOMA‐co‐EA) containing blends were miscible over the whole composition range. The miscibility behaviors were discussed in terms of Fourier transform infrared spectra and interaction parameters based on the binary interaction model. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1472–1480, 2001     

A novel synthesis of acrylic acid containing polymers

A novel synthesis of linear acrylic acid containing polymers, poly(styrene-co-acrylic acid) and poly(acrylic acid), was accomplished through hydrolysis of the respective parent polymers, i.e. poly(styrene-co-methyl acrylate) and poly(methyl acrylate), with trimethylsilyl iodide under mild conditions. Combination of ¹H NMR, ¹³C NMR, FTIR, DSC and chemical titration confirms that the conversion from methoxycarbonyl to carboxyl is almost complete. This method is further successfully applied to synthesize poly-(ethyl methacrylate-co-acrylic acid) through selective hydrolysis of the methyl acrylate units in poly(ethyl methacrylate-co-methyl acrylate).     

The Influence of Reaction Conditions on the Copolymer Composition in Inverse Miniemulsion

Summary: Water-soluble poly(2-acrylamido-2-methylpropane-1-sulfonic acid-co-1-vinylimidazole) (P(AMPS-co-1-VIm)) and poly(2-acrylamido-2-methylpropane-1-sulfonic acid-co-2-(dimethylamino)ethyl methacrylate (P(AMPS-co-DAMA)) are studied as it is known that the copolymer composition is affected by pH of the monomer phase in inverse miniemulsion. The distribution of the basic monomers in the continuous and dispersed phase changes due to their degrees of protonation. The amounts of the monomers in the cyclohexane phase is determined by gas chromatography, the copolymer composition is studied by elemental and thermogravimetric analysis. An insight into the monomer distribution in the polymer is provided by simultaneous potentiometric and conductometric titration of polymer solutions.     

Synthesis and properties of poly(oxyethylene)s containing thioether,sulfoxide, or sulfone groups

Poly[oxy(ethylthiomethyl)ethylene] (ETE) was prepared from poly[oxy (chloromethyl)ethylene] (CE) by reaction with sodium ethanethiolate. Sulfoxide and sulfone analogues were synthesized by oxidation of the poly[oxy(ethylthiomethyl)ethylene]. By changing the chloromethyl/sodium ethanethiolate ratio, poly[oxy (chloromethyl)ethylene-co-oxy(ethylthiomethyl)ethylene] (CE-ETEs) were easily made. Poly[oxy(ethylsulfinylmethyl)ethylene] (ESXE), poly[oxy(chloromethyl)ethylene-co-oxy(ethylsulfinylmethyl)ethylene] (CE-ESXEs), poly[oxy(ethylsulfonylmethyl)ethylene] (ESE), and poly[oxy(chloromethyl)ethylene-co-oxy(ethylsulfonylmethyl)ethylene] (CE-ESEs) were obtained by oxidation of ETE or CE-ETEs. There was little if any chain degradation. The (co)polymer structures were confirmed by FTIR and ¹H-NMR spectroscopic studies. Their thermal properties were studied by DSC and TGA. T_gs of ETE, ESXE, and ESE were -57, 36, and 57°C, respectively, and T_d,os (initial decomposition temperature, TGA) were 331, 198, and 308°C, respectively. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 793–801, 1998     

Synthesis and characterization of graft copolymers based on polyepichlorohydrin via reversible addition-fragmentation chain transfer polymerization

In this study, synthesis of poly(epichlorohydrin-g-methyl methacrylate) graft copolymers by reversible addition-fragmentation chain transfer (RAFT) polymerization was reported. For this purpose, epichlorohydrin was polymerized by using HNO₃ via cationic ring-opening mechanism. A RAFT macroinitiator (macro-RAFT agent) was obtained by the reaction of potassium ethyl xanthogenate and polyepichlorohydrin. The graft copolymers were synthesized using macro-RAFT agent as initiator and methyl methacrylate as monomer. The synthesis of graft copolymers was conducted by changing the time of polymerization and the amount of monomer-initiator concentration that affect the RAFT polymerization. The effects of these parameters on polymerization were evaluated via various analyses. The characterization of the products was determined using ¹H-nuclear magnetic resonance (¹H-NMR), Fourier-transform infrared spectroscopy, gel-permeation chromatography, thermogravimetric analysis, elemental analysis, and fractional precipitation techniques. The block lengths of the graft copolymers were calculated by using ¹H-NMR spectrum. It was observed that the block length could be altered by varying the monomer and initiator concentrations.     

Aminated PCL‐based copolymers by chemical modification of poly(α‐iodo‐ε‐caprolactone‐co‐ε‐caprolactone)

A novel method is proposed to access to new poly(α‐amino‐ε‐caprolactone‐co‐ε‐caprolactone) using poly(α‐iodo‐ε‐caprolactone‐co‐ε‐caprolactone) as polymeric substrate. First, ring‐opening (co)polymerizations of α‐iodo‐ε‐caprolactone (αIεCL) with ε‐caprolactone (εCL) are performed using tin 2‐ethylhexanoate (Sn(Oct)₂) as catalyst. (Co)polymers are fully characterized by ¹H NMR, ¹³C NMR, FTIR, SEC, DSC, and TGA. Then, these iodinated polyesters are used as polymeric substrates to access to poly(α‐amino‐ε‐caprolactone‐co‐ε‐caprolactone) by two different strategies. The first one is the reaction of poly(αIεCL‐co‐εCL) with ammonia, the second one is the reduction of poly(αN₃εCL‐co‐εCL) by hydrogenolysis. This poly(α‐amino‐ε‐caprolactone‐co‐ε‐caprolactone) (F_αNH2εCL < 0.1) opens the way to new cationic and water‐soluble PCL‐based degradable polyesters. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6104–6115, 2009     

Dispersion polymerization of methyl methacrylate in supercritical CO2 in the presence of non-fluorous random copolymers

A series of non-fluorous random copolymers, composed of 3-[tris(trimethylsilyloxy)silyl] propyl methacrylate and 2-dimethylaminoethyl methacrylate, poly(SiMA-co-DMAEMA) with different comonomer ratios were prepared and utilized as stabilizers for the free radical dispersion polymerization of methyl methacrylate (MMA) in supercritical carbon dioxide (scCO₂). It was demonstrated that the composition and concentration of the stabilizer have a dramatic effect on the morphology of resulting poly methyl methacrylate (PMMA) latex. When the copolymeric stabilizer poly(SiMA-co-DMAEMA) (71:29) was employed, free-flowing spherical PMMA particles were produced in high yield. As the concentration of stabilizer increases, the resulting size of colloidal particles decreases. In addition, the monomer concentration and initial pressure affected the particle diameter of PMMA.