Enzymatic formation of pyrrole-containing novel cyclic polyprenoids by bacterial squalene:hopene cyclase

A convergent synthesis provided two pyrrole-containing squalene analogues, in which a C₂₀ isoprene unit is connected to pyrrole, 2-(geranylgeranyl)pyrrole and 2-(farnesyldimethylallyl)pyrrole. When incubated with recombinant squalene:hopene cyclase from Alicyclobacillus acidocaldarius, 2-(farnesyldimethylallyl)pyrrole was enzymatically converted to a 10:1 mixture of a tricyclic and a bicyclic unnatural novel polyprenoids, whereas 2-(geranylgeranyl)pyrrole was not a substrate for the enzyme.     

一种新型α-甲醚基吡咯的合成

以乙酰乙酸苄酯(4)为原料, 经Knorr缩合制备了2,4-二甲基-3-丙酸甲酯基-5-羧酸苄酯基-1-氢吡咯 (2) 和2,4-二甲基-3-羧酸甲酯基-5-羧酸苄酯基-1-氢吡咯(3)。乙醚介质中,溴水氧化条件下,吡咯 (2) 发生自身缩合生成二吡咯甲烷 (7),吡咯 (3)无反应发生。在Pb(OAC)₄氧化条件下,当其浓度为吡咯 (3)浓度的2倍时,在80 ℃,吡咯 (3) 完全转华。所得产物经HCl甲醇溶液回流,以82%的产率制备了新型2-甲氧基甲基-3-羧酸甲酯基-4-甲基-5-羧酸苄酯基-1氢吡咯 (1)。吡咯(1)、(2)、(3)及二吡咯(7)的结构用核磁、元素分析、质谱和红外等测试技术进行了表征。吡咯(1)的构建对进一步研究吡咯构效关系具有一定参考价值。     

Gadolinium triflate catalyzed alkylation of pyrroles: efficient synthesis of 3-oxo-2,3-dihydro-1H-pyrrolizine derivatives

Novel 2-alkylated pyrrole derivatives were synthesized regioselectively by Gd(OTf)₃ catalyzed addition reactions of pyrrole to substituted dimethyl 2-benzylidenemalonate derivatives under mild reaction conditions. 2-Alkylated pyrrole derivatives are used for the construction of the 3-oxo pyrrolizine skeleton. Intramolecular cyclization of alkylated pyrrole derivatives afforded new diastereoselective 3-oxo-2,3-dihydro-1H-pyrrolizine derivatives with good to high yields.     

Comparison of benzene, nitrobenzene, and dinitrobenzene 2-arylsulfenylpyrroles

The effectiveness of the 2,4-dinitrobenzenesulfenyl and 4-nitrobenzenesulfenyl groups as masking and directing groups at the 2-position of pyrrole has been investigated and compared to that of 2-phenylthiopyrrole. The presence of the nitro group(s) enhances stability of the corresponding pyrrole toward acid and does not significantly decrease the ability of the pyrrolic unit to undergo electrophilic aromatic substitution reactions in the form of formylation, nitration, and condensation with aldehydes. The synthetic utility of 2-(2,4-dinitrobenzenesulfenyl)pyrrole was demonstrated through the synthesis of meso-substituted dipyrromethanes. The sulfoxides 2-(2,4-dinitrobenzenesulfinyl)pyrrole and 2-(4-nitrobenzenesulfinyl)pyrrole underwent neither formylation nor nitration, and the increasing presence of nitro groups within the moiety at the 2-position resulted in decreased stability under acidic conditions.     

A highly enantiopure biconcave porphyrin with effective D4-structure

A first representative of an effectively D4-symmetric biconcave porphyrin (1) was prepared from a tetramerizing condensation of a C2-symmetric pyrrole (2). The chiral pyrrole 2 was synthesized in a six-step reaction sequence starting from the C2h-symmetric 2,6-di-tert-butylanthracene. The relevant stereochemistry was introduced in a highly diastereo-discriminating Diels-Alder reaction with fumaric acid di(-)menthyl ester, catalyzed by aluminum chloride. X-ray analyses of two of the dimenthyl esters prepared unambiguously secured their tentatively assigned absolute configuration and that of the pyrrole 2 (as the S,S isomer). The enantiomeric purity of the pyrrole 2 was determined as 99% ee, using the Co11 complex of the porphyrin 1 as a chiral shift reagent. The pyrrole 2 lent itself to a stereochemically nearly uniform preparation of the chiral, biconcave porphyrin 1. Applying Horeau's principle, 1 was calculated to be present in an enantiomeric excess of about 10(9):1. The validity of the statistical considerations relevant for this estimate were verified by examination of the results from preparative tetramerization experiments in which the enantiomeric purity of the pyrrole 2 was deliberately lowered.     

Gas-phase kinetic measurements of the ligation of Ni+, Cu+, Ni(pyrrole)1,2+ and Cu(pyrrole)1,2+ with CO2, D2O, NH3 and NO

The rate and equilibrium kinetics of the reactions of the biologically important metal species M(+), M(+)(pyrrole) and M(+)(pyrrole)(2) (M = Ni, Cu) have been investigated with the biological gases CO(2), D(2)O, NH(3) and NO in the gas phase at 295 +/- 2 K in helium buffer-gas at a pressure of 0.35 +/- 0.01 Torr. The measurements were taken with an Inductively Coupled Plasma/Selected-Ion Flow Tube (ICP/SIFT) tandem mass spectrometer. Only ligation was observed for the reactions of bare Ni(+) and Cu(+) with CO(2), D(2)O and NH(3) with rates consistent with the known strengths of the resulting ligand-metal bonds. Both metal cations appeared to be oxidized and produce N(2)O in interesting reactions that are second order in NO. One pyrrole ligand was observed to increase the rate of ligation by as much as a factor of 100 and to switch off the oxidation with NO. Equilibrium was achieved for the ligation of CO(2), D(2)O and NO to both Ni(+)(pyrrole) and Cu(+)(pyrrole), and so it was possible to determine absolute values for the standard free energies of ligation. No ligand substitution was observed with M(+)(pyrrole). M(+)(pyrrole)(2) was observed to be generally unreactive towards the small molecules investigated: a notable exception is ammonia. Very fast ligand substitution reactions were observed for reactions of M(+)(pyrrole)(2) with NH(2).     

Trimethylsilyl‐Protected Alkynes as Selective Cross‐Coupling Partners in Titanium‐Catalyzed [2+2+1] Pyrrole Synthesis

Trimethylsilyl (TMS)‐protected alkynes served as selective alkyne cross‐coupling partners in titanium‐catalyzed [2+2+1] pyrrole synthesis. Reactions of TMS‐protected alkynes with internal alkynes and azobenzene under the catalysis of titanium imido complexes yielded pentasubstituted 2‐TMS‐pyrroles with greater than 90 % selectivity over the other nine possible pyrrole products. The steric and electronic effects of the TMS group were both identified to play key roles in this highly selective pyrrole synthesis. This strategy provides a convenient method to synthesize multisubstituted pyrroles as well as an entry point for further pyrrole diversification through facile modification of the resulting 2‐silyl pyrrole products, as demonstrated through a short formal synthesis of the marine natural product lamellarin R.     

Theoretical analysis of pyrrole anions addition to carbon disulfide and carbon dioxide

Quantum chemical analysis (MP2/6‐31+G*) of the pyrrole anions addition to carbon disulfide and the substitution effects therein shows that pyrrole‐2 (5)‐carbodithioates are thermodynamically the most stable compounds, while 1‐isomer obtained from the unsubstituted pyrrole is likely a kinetic product. Steric hindrances destabilize N‐adducts when a methyl substituent appears in a 2(5) position and the 2,5‐dimethyl‐1‐pyrrolecarbodithioate anion turns out to be even less stable than the 2,5‐dimethyl‐3‐pyrrolecarbodithioate anion. By contrast, pyrrole‐1‐carboxylates are calculated to be the most stable adducts of CO₂ with pyrrole anions. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem, 2002     

Strain-Induced Ring Expansion Reactions of Calix[3]pyrrole-Related Macrocycles

The recent discovery of calix[3]pyrrole, a porphyrinogen-like tripyrrolic macrocycle, has provided an unprecedented strain-induced ring expansion reaction into calix[6]pyrrole. Here, we synthesized calix[n]furan[3-n]pyrrole (n=1∼3) macrocycles to investigate the reaction scope and mechanism of the ring expansion. Single crystal X-ray analysis and theoretical calculations revealed that macrocyclic ring strain increases as the number of inner NH sites increases. While calix[1]furan[2]pyrrole exhibited almost quantitative conversion into calix[2]furan[4]pyrrole within 5 minutes, less-strained calix[2]furan[1]pyrrole and calix[3]furan were inert. However, N-methylation of calix[2]furan[1]pyrrole induced a ring-expansion reaction that enabled the isolation of a linear reaction intermediate. The mechanism analysis revealed that the ring expansion consists of regioselective ring cleavage and subsequent cyclodimerization. This reaction was further utilized for synthesis of calix[6]-type macrocycles.     

Mono- and dialkylations of pyrrole at C2 and C5 positions by nucleophilic substitution reaction in ionic liquid

[reaction: see text] A novel ionic liquid methodology for pyrrole C-alkylation is described. The pyrrole alkylation is achieved with various simple alkyl halides and mesylates selectively at C2 and C5 positions in good yields with minimal byproducts under relatively mild conditions in various ionic liquids. 2-(3-Phenylpropyl)pyrrole (2a) was synthesized from pyrrole and 1-bromo-3-phenylpropane in a mixture solvent system, [bmim][SbF6] and CH3CN, in 81% yield at 115 degrees C for 44 h with 5% yield of dialkylated compound 3a.     

Regioselective addition of pyrrole to N-tosyl imines in the presence of Cu(OTf)2

The Cu(OTf)₂ catalysed reaction of pyrrole with N-tosyl imines gives pyrrole sulfonamides in high yields. The addition reaction takes place regioselectively at C(2) of the pyrrole. The procedure is simple and does not require anhydrous conditions.     

CH...anion interaction in BF2 complexes of C3-bridged oligopyrroles

Alkyl-substituted derivatives of 1,3-dipyrrolyl-1,3-propanedione BF2 complexes, the efficient receptors for halide and oxoanions with use of bridging CH as well as pyrrole NH, are reported. BF2 complexes with only one pyrrole NH interaction site (2d,e), which exhibit smaller affinities than the basic structure (2b), bind anions tightly, which is inferred by UV/vis absorption spectral changes, compared to the derivatives with an alkyl group at the bridging carbon (2f) or two pyrrole nitrogen sites (2c). With use of 1H NMR and theoretical studies for anion complexes of 2d and 2e, bridging CH (and one beta-CH in 2d) as well as pyrrole NH is found to interact with anions.     

Calix[6]pyrrole and hybrid calix[n]furan[m]pyrroles (n+m=6): syntheses and host-guest chemistry

Calix[6]pyrrole 2 and the "hybrid systems" calix[3]furan[3]pyrrole 12, calix[2]furan[4]pyrrole 13, and calix[1]furan[5]pyrrole 14, have been synthesized by increasing conversion of the furan units present in the readily accessible calix[6]furan 3 to pyrroles. The host-guest chemistry of these novel macrocycles towards a number of anions, including halogen ions, dihydrogen phosphate, hydrogen sulfate, nitrate, and cyanide has been investigated in solution by (1)H NMR titration techniques and/or phase transfer experiments. The solid-state structures of the free receptors 2, 12, and 13, the 1:1 complexes of calix[6]pyrrole 2 with chloride and bromide, and the 1:1 complex of 14 with chloride are also reported.     

Alkylthio unit as an alpha-pyrrole protecting group for use in dipyrromethane synthesis

The synthesis of porphyrin precursors requires the successive introduction of substituents at the pyrrole alpha- and alpha'-positions (2- and 5-, respectively). An alpha-pyrrole substituent that serves as a temporary masking agent and is not deactivating would greatly facilitate such syntheses, particularly for beta-(3,4)-unsubstituted pyrroles, but has heretofore not been available. A series of alpha-RS groups (R = Me, Et, n-decyl, Ph) have been investigated in this regard, including the determination of the kinetics of substitution at the pyrrolic 3-, 4-, and 5-positions and the application to dipyrromethane formation. The RS group was readily introduced into the pyrrole alpha-position by the reaction of 2-thiocyanatopyrrole (prepared from pyrrole, ammonium thiocyanate, and iodine) and the corresponding Grignard reagent RMgBr. Each 2-alkylthio group activated the pyrrole ring toward deuteration at the 3- or 5- (vs 4-) position. The dipyrromethane synthesis was carried out using a 2:1 ratio of 2-(RS)pyrrole/benzaldehyde with a catalytic amount of InCl3 at room temperature in the absence of any solvent. The alpha-RS group was removed by hydrodesulfurization using Raney nickel or nickel complexes. This stoichiometric synthesis using the alpha-RS-protected pyrrole is in contrast to the traditional synthesis that employs an aldehyde and 25-100 mol equiv of pyrrole. Six meso-substituted dipyrromethanes were prepared by the reaction of 2-(n-decylthio)pyrrole/aldehyde/InCl3 (2.2:1:0.2 ratio) followed by hydrodesulfurization. Other reactions of the 1,9-bis(RS)dipyrromethane include oxidation to give (i) the 1,9-bis(RS)dipyrrin or (ii) the 1,9-bis(RSO2)dipyrromethane, which underwent subsequent complexation with dibutyltin dichloride. In summary, under mild reaction conditions, the 2-alkylthio group is readily introduced to the pyrrole nucleus, directs electrophilic substitution to the 5-position, and is readily removed as required for elaboration of porphyrinic precursors.     

Yb（OTf）3 Catalyzed Nucleophilic Conjugate Addition of Pyrrole to α，β-Unsaturated Ketones and Nitro-compounds

Under the catalysis of Yb(OTf)3, nucleophilic conjugate addition of pyrrole to electron deficient olefins in CH2Cl2 at ambient temperature gives corresponding 2-alkylated pyrrole derivatives in good yields with high selectivity.     

A novel class of fused heterocycles,benzo­[b]­furo­[2,3‐c]­pyrroles

In the isomeric compounds 2‐benzyl‐3‐methyl‐1‐phenyl­benzo­[b]­furo­[2,3‐c]­pyrrole and 2‐benzyl‐1‐methyl‐3‐phenyl­benzo­[b]­furo­[2,3‐c]­pyrrole, both C₂₄H₁₉NO, the pyrrole ring, although presumably somewhat strained, does not differ appreciably from N‐methyl­pyrrole except for a relatively short C—C single bond in the pyrrole ring.     

I2-catalyzed one-pot synthesis of benzofuro/thieno[2,3-b]pyrrole motifs

A novel I₂-catalyzed one-pot multicomponent protocol for the synthesis of a variety of elusive furo[2,3-b]pyrrole and thieno[2,3-b]pyrrole libraries has been established. To date, cyclization among alkanone, hydrazine and 2-bromobenzofuran or 2-bromobenzo[b]thiophene has not been explored in one-pot. Thus, the proposed single step protocol provides a versatile alternative to existing routes for accessing useful furo[2,3-b]pyrrole and thieno[2,3-b]pyrrole libraries.     

Efficient Copper-Catalyzed Annulation of 2-Formylazoles with 2-Haloanilines for the Synthesis of Pyrrole-and Imidazole-Fused Quinoxalines

Promoted by CuI/2‐hydroxybenzohydrazide catalytic system, a variety of pyrrole‐ and imidazole‐fused quinoxalines have been efficiently one‐pot synthesized from pyrrole‐/imidazole‐2‐carboxaldehyde and 2‐haloanilines in moderate to excellent yields.     

The application of vinylogous iminium salt derivatives to an efficient synthesis of the pyrrole containing alkaloids Rigidin and Rigidin E

Studies directed on the synthesis of the pyrrole containing marine natural products Rigidin and Rigidin E via vinylogous iminium salts are described. The successful strategy relies on the formation of a 2,4-disubstituted pyrrole from a vinamidinium salt followed by acylation at the 5-position of pyrrole. Halogenation and aminocarbonylation at the 3-position of pyrrole followed by hydrolysis of the ester group at C-2 and subsequent Curtius rearrangement generates the pyrrolopyrimidine skeleton. A final deprotection step completes the synthesis of Rigidin and Rigidin E.     

Synthesis and Electrochemical Polymerisation of Calix[4]pyrroles Containing N-substituted Pyrrole Moieties

Abstract

The first examples of the synthesis of calix[4]pyrroles containing pendant N-substituted pyrrole moieties (in the meso- (2) and β- (1) positions) is reported. Attempts at the production of electropolymerised films containing (1) or (2) alone failed, however the electrochemical co-polymerisation of (1) and pyrrole and (2) and pyrrole has been achieved.