CHARACTERISTIC DIMENSIONLESS NUMBERS IN MULTl-SCALE AND RATE-DEPENDENT PROCESSES

Multi-scale modeling of materials properties and chemical processes has drawn great attention from science and engineering. For these multi-scale and rate-dependent processes, how to characterize their trans-scale for-mulation is a key point. Three questions should be addressed:How do multi-sizes affect the problems?How are length scales coupled with time scales?How to identify emergence of new structure in process and its effect?For this sake, the macroscopic equations of mechanics and the kinetic equations of the microstructural transforma-tions should form a unified set that be solved simultaneously.As a case study of coupling length and time scales, the trans-scale formulation of wave-induced damage evolution due to mesoscopic nucleation and growth is discussed. In this problem, the trans-scaling could be reduced to two inde-pendent dimensionless numbers: the imposed Deborah number De=(ac)/(LV) and the intrinsic Deborah num-ber D = (nNc5)/V* ,where a. L, c, V and nN are wave speed, sample size, micr     

Interaction between cracks and effect of microcrack zone on main crack tip

Mechanism interaction between cracks with different orientation angles is analyzed based on the principle of superposition and a flattening method. It is found that the maximum interaction effect does not occur when the microcrack is along the direction parallel or perpendicular to the principal tensile stress, which is different from the conclusion drawn by Ortiz （1987）. The mechanism of microcrack generation and the effect of the microcrack zone on the main crack tip are studied. It is concluded that the microcrack zone has effect on the main crack tip, which increases with the increase of microcrack density and length.     

Effects of temperature-dependent viscosity variation on entropy generation,heat and fluid flow through a porous-saturated duct of rectangular cross-section

Effect of temperature-dependent viscosity on fully developed forced convection in a duct of rectangular cross-section occupied by a fluid-saturated porous medium is investigated analytically. The Darcy flow model is applied and the viscosity-temperature relation is assumed to be an inverse-linear one. The case of uniform heat flux on the walls, i.e. the H boundary condition in the terminology of Kays and Crawford [12], is treated. For the case of a fluid whose viscosity decreases with temperature, it is found that the effect of the variation is to increase the Nusselt number for heated walls. Having found the velocity and the temperature distribution, the second law of thermodynamics is invoked to find the local and average entropy generation rate. Expressions for the entropy generation rate, the Bejan number, the heat transfer irreversibility, and the fluid flow irreversibility are presented in terms of the Brinkman number, the Peclet number, the viscosity variation number, the dimensionless wall heat flux, and the aspect ratio (width to height ratio). These expressions let a parametric study of the problem based on which it is observed that the entropy generated due to flow in a duct of square cross-section is more than those of rectangular counterparts while increasing the aspect ratio decreases the entropy generation rate similar to what previously reported for the clear flow case by Ratts and Raut [14].     

Universal hierarchical symmetry for turbulence and general multi-scale fluctuation systems

Scaling is an important measure of multi-scale fluctuation systems. Turbulence as the most remarkable multi-scale system possesses scaling over a wide range of scales. She-Leveque （SL） hierarchical symmetry, since its publication in 1994, has received wide attention. A number of experimental, numerical and theoretical work have been devoted to its verification, extension, and modification. Application to the understanding of magnetohydrodynamic turbulence, motions of cosmic baryon fluids, cosmological supersonic turbulence, natural image, spiral turbulent patterns, DNA anomalous composition, human heart variability are just a few among the most successful examples. A number of modified scaling laws have been derived in the framework of the hierarchical symmetry, and the SL model parameters are found to reveal both the organizational order of the whole system and the properties of the most significant fluctuation structures. A partial set of work related to these studies are reviewed. Particular emphasis is placed on the nature of the hierarchical symmetry. It is suggested that the SL hierarchical symmetry is a new form of the self-organization principle for multi-scale fluctuation systems, and can be employed as a standard analysis tool in the general multi-scale methodology. It is further suggested that the SL hierarchical symmetry implies the existence of a turbulence ensemble. It is speculated that the search for defining the turbulence ensemble might open a new way for deriving statistical closure equations for turbulence and other multi-scale fluctuation systems.     

Analytical solution for the stress field of hierarchical defects:multiscale framework and applications

Hierarchical defects are defined as adjacent defects at different length scales.Involved are the two scales where the stress field distribution is interrelated.Based on the complex variable method and conformal mapping,a multiscale framework for solving the problems of hierarchical defects is formulated.The separated representations of mapping function,the governing equations of potentials,and the stress field are subsequently obtained.The proposed multiscale framework can be used to solve a variety of simplified engineering problems.The case in point is the analytical solution of a macroscopic elliptic hole with a microscopic circular edge defect.The results indicate that the microscopic defect aggregates the stress concentration on the macroscopic defect and likely leads to global propagation and rupture.Multiple micro-defects have interactive effects on the distribution of the stress field.The level of stress concentration may be reduced by the coalescence of micro-defects.This work provides a unified method to analytically investigate the influence of edge micro-defects within the scope of multiscale hierarchy.The formulated multiscale approach can also be potentially applied to materials with hierarchical defects,such as additive manufacturing and bio-inspired materials.     

Modified smoothed particle hydrodynamics approach for modelling dynamic contact angle hysteresis

Dynamic wetting plays an important role in the physics of multiphase flow, and has a significant influence on many industrial and geotechnical applications. In this work, a modified smoothed particle hydrodynamics (SPH) model is employed to simulate surface tension, contact angle and dynamic wetting effects at meso-scale. The wetting and dewetting phenomena are simulated in a capillary tube, where the liquid particles are raised or withdrawn by a shifting substrate. The SPH model is modified by introducing a newly developed viscous force formulation at the liquid-solid interface to reproduce the rate-dependent behaviour of the moving contact line. Dynamic contact angle simulations with the interfacial viscous force are conducted to verify the effectiveness and accuracy of this new formulation. In addition, the influence of interfacial viscous forces with different magnitude on the contact angle dynamics is examined by empirical power-law correlations;the derived constants suggest that the dynamic contact angle changes monotonically with the interfacial viscous force. The simulation results are consistent with experimental observations and theoretical predictions, implying that the interfacial viscous force can be associated with the slip length of flow and the microscopic surface roughness. This work demonstrates that the modified SPH model can successfully account for the rate-dependent effects of a moving contact line, and can be used for realistic multiphase flow simulations under dynamic conditions.     

A new subregion mesh method for the investigation of the elastic-plastic impact in flexible multibody systems

Impact processes between flexible bodies often lead to local stress concentration and wave propagation of high frequency. Therefore, the modeling of flexible multi-body systems involving impact should consider the local plastic deformation and the strict requirements of the spa-tial discretization. Owing to the nonlinearity of the stiffness matrix, the reduction of the element number is extremely important. For the contact-impact problem, since different regions have different requirements regarding the element size, a new subregion mesh method is proposed to reduce the number of the unnecessary elements. A dynamic model for flexible multibody systems with elastic-plastic contact impact is established based on a floating frame of reference formulation and complete Lagrange incremental nonlin-ear finite-element method to investigate the effect of the elastic-plastic deformation as well as spatial discretization. Experiments on the impact between two bodies are carried out to validate the correctness of the elastic-plastic model. The proposed formulation is applied to a slider-crank system with elastic-plastic impact.     

PRODUCT ENGINEERING OF PARTICULATE SOLIDS

An important development in Particle Technology is directed towards tailored product properties, i.e. product engineering. Product properties are strongly related to the disperse properties of the particles, i.e. their size, shape, morphology and surface. We discuss some general applicable principles in product engineering and give various examples. Strongly related to this approach are methods to characterize and to tailor product and particle properties. For systems which are controlled by the interfaces (e.g. particles in the micron size range and below) we apply a multi-scale approach from the particulate interfaces over particle interactions to the macroscopic properties. Thus, we tailor macroscopic product properties through microscopic control of the interfaces. This approach must be complemented by methods to characteri zeparticle and product properties. It is shown that by careful consideration of the underlying physical processes considerable progress can be achieved.     

Unconventional phase field simulations of transforming materials with evolving microstructures

Transforming materials with evolving microstructures is one of the most important classes of smart materials that have many potential technological applications,and an unconventional phase field approach based on the characteristic functions of transforming variants has been developed to simulate the formation and evolution of their microstructures.This approach is advantageous in its explicit material symmetry and energy well structure,minimal number of material coefficients,and easiness in coupling multiple physical processes and order parameters,and has been applied successfully to study the microstructures and macroscopic properties of shape memory alloys,ferroelectrics,ferromagnetic shape memory alloys,and multiferroic magnetoelectric crystals and films with increased complexity.In this topical review,the formulation of this unconventional phase field approach will be introduced in details,and its applications to various transforming materials will be discussed.Some examples of specific microstructures will also be presented.     

Analysis of two-dimensional cavity flow by finite elements

The variational principle in terms of stream function ψ for free surface gravity flow is discussed by the formulation of first-order variation in a variable domain. Because of different transversal conditions adopted, there are four forms of variational principle in terms of ψ.A n air-gilled cavity flow with given discharge and total energy is then analysed by finite element method. At the end of the cavity, the free stream line is tangent to a short fictitious plate of given length, which joins the fixed boundary at on angle to be determined. The condition that the free stream line should be tangent to the fixed boundary at the point of separation makes the solution unique.Finally curves giving the cavity length as a function of the Fraude number, cavity pressure and channel bottom slope are presented.     

一种基于直接计算高阶奇异积分的断裂力学双边界积分方程分析法

相对于有限元法,边界单元法在求解断裂问题上有着独特的优势,现有的边界单元法中主要有子区域法和双边界积分方程法.采用一种改进的双边界积分方程法求解二维、三维断裂问题的应力强度因子,对非裂纹边界采用传统的位移边界积分方程,只需对裂纹面中的一面采用面力边界积分方程,并以裂纹间断位移为未知量直接用于计算应力强度因子.采用一种高阶奇异积分的直接法计算面力边界积分方程中的超强奇异积分;对于裂纹尖端单元,提供了三种不同形式的间断位移插值函数,采用两点公式计算应力强度因子.给出了多个具体的算例,与现存的精确解或参考解对比,可得到高精度的计算结果.      

汶川地震诱发文家沟巨型滑坡 碎屑流基本特征及成因机制初步分析


2008年5月12日,汶川M80地震在四川省绵竹市清平乡文家沟内诱发一巨型滑坡。通过现场调查得知,滑坡前后缘高差455m,厚度20～30m,滑面为基岩层面,初始方量2750×107m3。滑体在运动中转化为碎屑流。滑坡-碎屑流总的水平运动距离为4022m,垂直运动距离为1443m,遗留的堆积物体积达5×107m3。滑坡距映秀—北川断裂仅36km,位于其下盘,地震烈度达XI度。滑坡导致文家沟中48人遇害,并形成一条完整的地震次生地质灾害链。初步分析表明滑坡启动速度快,滑坡向碎屑流转化过程明显、地点明确。碎屑流运动过程复杂,伴有强烈的“气垫效应”和“前缘气浪冲击效应”。作者认为,文家沟滑坡的高启动速度是长持时强烈地震动作用的结果,与山体的猛烈碰撞是导致滑体解体并转化为碎屑流的原因。     

Preface: Orbits around asteroid

One of the core issues in modern celestial mechanics is the orbital dynamics in the near-regime gravitational field of as- teroids, which provides deep insights into the mathematical nature of a class of nonlinear systems, and plays as a critical basis for in situ explorations of different science goals. Lots of efforts have been made to reveal the characteristics of orbital motion in the vicinity of asteroids, and to improve the skills of asteroid research in methodology.     

The 7th International Conference on Fluid Mechanics May 24-27,2015,Qingdao,China

正http://www.icfm7.org First Announcement and Call for PapersThe objective of International Conference on Fluid Mechanics(ICFM)is to provide a forum for researchers to exchange new ideas and recent advances in the fields of theoretical,experimental,computational Fluid Mechanics as well as interdisciplinary subjects.It was successfully convened by the Chinese Society of Theoretical and Applied Mechanics(CSTAM)in Beijing(1987,     

INFORMATION FOR CONTRIBUTORS

Contributions： The Journal, Acta Mechanica Solida Sinica, is pleased to receive papers from engineers and scientists working in various aspects of solid mechanics. All contributions are subject to critical review prior to acceptance and publication.