NiCl(2)(dppe)-catalyzed cross-coupling of aryl mesylates, arenesulfonates, and halides with arylboronic acids

An investigation of the NiCl(2)(dppe)-, NiCl(2)(dppb)-, NiCl(2)(dppf)-, NiCl(2)(PCy(3))(2)-, and NiCl(2)(PPh(3))(2)-catalyzed cross-coupling of the previously unreported aryl mesylates, and of aryl arenesulfonates, chlorides, bromides, and iodides containing electron-withdrawing and electron-donating substituents with aryl boronic acids, in the absence of a reducing agent, is reported. NiCl(2)(dppe) was the only catalyst that exhibited high and solvent-independent activity in the two solvents investigated, toluene and dioxane. NiCl(2)(dppe) with an excess of dppe, NiCl(2)(dppe)/dppe, was reactive in the cross-coupling of electron-poor aryl mesylates, tosylates, chlorides, bromides, and iodides. This catalyst was also efficient in the cross-coupling of aryl bromides and iodides containing electron-donating substituents. Most surprisingly, the replacement of the excess dppe from NiCl(2)(dppe)/dppe with excess PPh(3) generated NiCl(2)(dppe)/PPh(3), which was found to be reactive for the cross-coupling of both electron-rich and electron-poor aryl mesylates and chlorides. Therefore, the solvent-independent reactivity of NiCl(2)(dppe) provides an inexpensive and general nickel catalyst for the cross-coupling of aryl mesylates, tosylates, chlorides, bromides, and iodides with aryl boronic acids.     

Preparation of 2,5-disubstituted oxazoles from N-propargylamides

[reaction: see text] 2,5-Disubstituted oxazoles have been prepared through the reaction of N-propargylamides with aryl iodides in the presence of Pd(2)(dba)(3), tri(2-furyl)phosphine, and NaO(t)()Bu. The reaction appears to proceed through a palladium-catalyzed coupling step followed by the in situ cyclization of the resultant coupling product.     

Palladium-catalyzed oxidative coupling of trialkylamines with aryl iodides leading to alkyl aryl ketones

A new, simple method for selectively synthesizing alkyl aryl ketones has been developed by palladium-catalyzed oxidative coupling of trialkylamines with aryl iodides. In the presence of PdCl(2)(MeCN)(2), TBAB, and ZnO, a variety of aryl iodides underwent an oxidative coupling reaction with tertiary amines and water to afford the corresponding alkyl aryl ketones in moderate to excellent yields. It is noteworthy that this method is the first example of using trialkylamines as the carbonyl sources for constructing alkyl aryl ketone skeletons.     

Efficient palladium-catalyzed homocoupling reaction and Sonogashira cross-coupling reaction of terminal alkynes under aerobic conditions

An efficient method for palladium-catalyzed homocoupling reaction of terminal alkynes in the synthesis of symmetric diynes is presented. The results showed that both Pd(OAc)(2) and CuI played crucial roles in the reaction. In the presence of 2 mol % Pd(OAc)(2), 2 mol % CuI, 3 equiv of Dabco, and air, homocoupling of various terminal alkynes afforded the corresponding symmetrical diynes in moderate to excellent yields, whereas low yields were obtained without either Pd(OAc)(2) or CuI. Moreover, high TONs (turnover numbers; up to 940 000 for the reaction of phenylacetylene) for the homocoupling reaction were observed. Under similar reaction conditions, cross-coupling of 1-iodo-4-nitrobenzene with phenylacetylene was also carried out smoothly in quantitative yield. However, the presence of CuI disfavored the palladium-catalyzed Sonogashira cross-coupling reactions of the less active aryl iodides and bromides. In the presence of 0.01-2 mol % Pd(OAc)(2), a number of aryl iodides and bromides were coupled with terminal alkynes in good to excellent yields. It is noteworthy that this protocol employs mild, efficient, aerobic, copper-free, and ligand-free conditions.     

Rhodium(I)-catalyzed silylation of aryl halides with triethoxysilane: practical synthetic route to aryltriethoxysilanes

[reaction: see text] The specific silylation of aryl iodides and bromides with triethoxysilane (EtO)(3)SiH in the presence of NEt(3) and a catalytic amount of [Rh(cod)(MeCN)(2)]BF(4) provides the corresponding aryltriethoxysilanes in high yield.     

Mizoroki-Heck reaction of (1-fluorovinyl)methyldiphenylsilane with aryl iodides

The Mizoroki-Heck reaction of (1-fluorovinyl)methyldiphenylsilane with a variety of aryl iodides was accomplished under the conditions composing Pd(OAc)(2), Ag(2)CO(3) and MS 4 ? in 1,4-dioxane to give the corresponding (E)-β-aryl-(α-fluorovinyl)methyldiphenylsilanes with excellent stereoselectivity.     

Bis-diimidazolylidine complexes of nickel: investigations into nickel catalyzed coupling reactions

Air and moisture stable homoleptic bis(diimidazolylidine)nickel(II) complexes, ([(diNHC)(2)Ni](2+)) 3a,b and their corresponding silver(I) 4a,b and palladium(II) 5a,b complexes were synthesized and characterized by NMR and single crystal X-ray analysis. The catalytic potential of complex 3a was assessed in Mizoroki-Heck and Suzuki-Miyaura coupling reactions. In the Suzuki-Miyaura coupling reaction, nickel precatalyst 3a was active for the coupling of aryl chlorides as well as aryl fluorides. The analogously synthesized Pd(II) complexes resulted in formation of (diNHC)PdCl(2) species which were not active for the coupling of aryl fluorides. For the Mizoroki-Heck reaction, it was found that aryl iodides could be activated in the absence of nickel or palladium precatalysts when using Na(2)CO(3) or NEt(3) as base while aryl iodides and aryl bromides could be activated in the Suzuki-Miyaura reaction sans precatalyst when K(3)PO(4) was used as base.     

Palladium-catalyzed intermolecular three-component coupling of aryl iodides, alkynes, and alkenes to produce 1,3-butadiene derivatives

[reaction: see text] The sequential three-component coupling of aryl iodides, diarylacetylenes, and monosubstituted alkenes effectively proceeds in the presence of Pd(OAc)(2), LiCl, and NaHCO(3) as catalyst, promoter, and base, respectively, in DMF-H(2)O to produce the corresponding 1,3-butadiene derivatives.     

Heck vinylation of aryl iodides by a silica sol-gel entrapped Pd(II) catalyst and its combination with a photocyclization process

[reaction: see text] Silica sol-gel encaged PdCl(2)(PPh(3))(2) is a recyclable catalyst for the Heck vinylation of aryl iodides. It is possible to couple the Heck reaction with photocyclization in a one-pot process.     

Carbonylative cross-coupling reaction of ethynylstibane with aryl iodides

Palladium-catalyzed carbonylative cross-coupling reaction of ethynylstibane (PhSbPh(2)) and aryl iodides (Ar-I) is described. The reaction of the stibanes and the halides under 1 atm of carbon monoxide in N,N-dimethylacetamide using a combination of 5 mol% Pd(OAc)(2) and 4 equivalents (20 mol%) of PPh(3) brought about carbonylative cross-coupling reaction to afford arylethynylketones [ArC(O)Ph] in good yields along with a small amount of directly coupled products, aryl acetylens (ArPh). Formation of the side product was completely suppressed by conducting the reaction under high CO pressure (20 atm) conditions. The present method provides a variety of carbonylated products in good yield even with electron-deficient aryl iodides which usually give inferior results due to their tendency to undergo decarbonylation in the cross-coupling reaction of ethynylstibanes and acyl halides.     

Palladium-Catalyzed Synthesis of 1,3-Dienes from Allenes and Organic Halides

A wide range of aryl and vinylic halides react with 1,1-dimethylallene (2a) and potassium carbonate in the presence of Pd(dba)(2) (dba = dibenzylideneacetone) in N,N-dimethylacetamide (DMA) at temperature 100-120 degrees C to give the corresponding dienes CH(2)C(CH(3))CRCH(2) (3a-o), where R is aryl or vinylic, in good to excellent yields. Higher yields of diene products were obtained for aryl bromides than for the corresponding aryl iodides and chlorides. Under similar reaction conditions, tetramethylallene (2b), 1-methyl-1-phenylallene (2c), 1-methyl-3-phenylallene (2d), and 1-cyclohexylallene (2e) also react with aryl and vinylic halides to give diene products (3p-w). For 2d, both E and Z isomers 3t and 3u of the diene product were observed. For 2e, two regioisomers 3vand 3w were isolated with 3w likely from alkene isomerization of 3v. Various palladium systems were tested for the catalytic activity of diene formation. In addition to Pd(dba)(2)/PPh(3), Pd(OAc)(2)/PPh(3), PdCl(2)(PPh(3))(2), and PdCl(2)(dppe) are also very effective as catalysts for the reaction of 2a with p-bromoacetophenone (1a) to give 3a. Studies on the effect of solvents and bases show that DMA and K(2)CO(3) are the solvent and base that give the highest yield of diene 3a. Possible mechanisms for this catalytic diene formation are proposed.     

An efficient palladium-catalyzed synthesis of cinnamaldehydes from acrolein diethyl acetal and aryl iodides and bromides

The reaction of aryl iodides and bromides with acrolein diethyl acetal in the presence of Pd(OAc)(2), (n)()Bu(4)NOAc, K(2)CO(3), KCl, and DMF, at 90 degrees C until the disappearance of the acetal followed by the addition of 2 N HCl to the crude reaction mixture, affords cinnamaldehydes in good to high yields. A variety of functional groups are tolerated in the aryl halides, including ether, aldehyde, ketone, ester, dialkylamino, nitrile, and nitro groups. The presence of substituents close to the oxidative addition site does not hamper the reaction.     

Functionalized arylzinc compounds in ethereal solvent: direct synthesis from aryl iodides and zinc powder and application to Pd-catalyzed reaction with allylic halides

Arylzinc compounds, ArZnX, were conveniently prepared in high yields by the reaction of zinc powder with aryl iodides, which contain electron-withdrawing groups such as CO(2)CH(3), CN, Br, or CF(3) at the ortho-, meta- or para-position, or electron-donating groups such as CH(3), OCH(3), or H, at 70 degrees C in THF, at 100 degrees C, or at 130 degrees C in diglyme, respectively. Pd(dba)(2) exhibited an outstanding efficient catalytic effect for the cross-coupling of these ethereal solutions of ArZnX with allylic halides to afford a variety of functionalized allylbenzenes in high yields; the reactions were mostly carried out at 0 degrees C for 5-30 min in the presence of 5 mol % of catalyst. The conversion of the aryl iodides to allylbenzenes via two reactions could be accomplished in one pot.     

Sequential Ni-catalyzed borylation and cross-coupling of aryl halides via in situ prepared neopentylglycolborane

A procedure for NiCl(2)(dppp)-catalyzed pinacolborylation and neopentylglycolborylation that utilizes in situ prepared inexpensive pinacolborane and neopentylglycolborane is reported. The scope of this reaction was demonstrated with a variety of aryl bromides and iodides. The resulting aryl neopentylglycolboronic esters undergo a NiCl(2)(dppe)-catalyzed cross-coupling with aryl halides, resulting in an extremely efficient and cost-effective method for the synthesis of functional biaryls, dendritic building blocks, and other complex architectures.     

Palladium-catalyzed sequential alkylation-alkenylation reactions. Application to the synthesis of 2-substituted-4-benzoxepines and 2,5-disubstituted-4-benzoxepines

The synthesis of 2-substituted-4-benzoxepines and 2,5-disubstituted-4-benzoxepines from aryl iodides and bromoenoates is described. This methodology is based on a palladium-catalyzed aromatic substitution followed by an intramolecular Heck sequence. Under the reaction conditions (Pd(OAc)(2) (10 mol %), tri-2-furylphosphine (20 mol %), norbornene (2 equiv), Cs(2)CO(3) (2 equiv), CH(3)CN, 85 degrees C), moderate to excellent yields of benzoxepines bearing numerous substituents (Me, F, Cl, etc.) are obtained.     

1,2-Bis(diphenylphosphino)carborane as a dual mode ligand for both the Sonogashira coupling and hydride-transfer steps in palladium-catalyzed one-pot synthesis of allenes from aryl iodides

[reaction: see text] One-pot allene synthesis from aryl iodides 1 and propargyldicyclohexylamine 2 proceeded in the presence of Pd(2)(dba)(3).CHCl(3) catalyst (2.5 mol %), 1,2-bis(diphenylphosphino)carborane 5 (10 mol %), CuI (15 mol %), and Et(3)N (150 mol %) to give the corresponding allenes 4 in good to high yields. Electron-deficient bidentate phosphines, such as 1,2-bis(diphenylphosphino)carborane 5 and (C(6)F(5))(2)PC(2)H(4)P(C(6)F(5))(2), play the role of a dual mode ligand for both the Sonogashira coupling and hydride-transfer reactions.     

Evidence for the role of tetramethylethylenediamine in aqueous Negishi cross-coupling: synthesis of nonproteinogenic phenylalanine derivatives on water

The structure of the alkylzinc-tetramethylethyl-enediamine (TMEDA) cluster cation 3 has been determined in the gas phase by a combination of tandem mass spectrometry, infrared multiphoton dissociation (IRMPD) spectroscopy, and DFT calculations. Both sets of experimental results establish the existence of a strongly stabilizing interaction of TMEDA with the zinc cation. High-level DFT calculations on the alkylzinc-TMEDA cluster cation 3 allowed the identification of two low energy conformers, each featuring a four-coordinate zinc atom with a bidentate TMEDA ligand, and internal coordination from the carbonyl group of the Boc group to zinc. The experimental IRMPD spectrum is reproduced with an appropriately weighted combination of the IR spectra of the two conformers identified by theory. DFT calculations on the structure of the alkylzinc halide 2 with coordinated TMEDA using the PCM model of water solvent suggest that TMEDA can promote ionization of the zinc-iodine bond in organozinc iodides under aqueous conditions, providing a credible explanation for the role of TMEDA in stabilizing the carbon-zinc bond. Reaction of the serine-derived iodide 1 with aryl iodides "on water", promoted by nano zinc in the presence of PdCl(2)(Amphos)(2) (5 mol %) and TMEDA, leads to the formation of protected phenylalanine derivatives 4 in reasonable yields. In the case of ortho-substituted aryl iodides and aryl iodides that are solids at room temperature, conducting the reaction at 65 °C gives improved results. In all cases, the product 5 of reductive dimerization of the iodide 1 is also isolated.     

Dabco as an inexpensive and highly efficient ligand for palladium-catalyzed Suzuki-Miyaura cross-coupling reaction

An inexpensive and highly efficient Pd(OAc)(2)/Dabco catalytic system has been developed for the cross-coupling of aryl halides with arylboronic acids. A combination of Pd(OAc)(2) and Dabco (triethylenediamine) was observed to form an excellent catalyst, which affords high TONs (turnover numbers; TONs up to 950 000 for the reaction of PhI and p-chlorophenylboronic acid) for Suzuki-Miyaura cross-coupling of various aryl iodides and bromides with arylboronic acids. [reaction: see text]     

Homogeneous catalysts supported on soluble polymers: biphasic Sonogashira coupling of aryl halides and acetylenes using MeOPEG-bound phosphine-palladium catalysts for efficient catalyst recycling

The Sonogashira coupling of various aryl bromides and iodides with different acetylenes was studied under biphasic conditions with soluble, polymer-modified catalysts to allow the efficient recycling of the homogeneous catalyst. For this purpose, several sterically demanding and electron-rich phosphines of the type R(P)PR(2) were synthesised. They are covalently linked to a monomethyl polyethylene glycol ether with a mass of 2000 Dalton (R(P)=MeOPEG(2000)) R(P)PR(2): -PR(2)= -CH(2)C(6)H(4)CH(2)P(1-Ad)(2), -C(6)H(4)-P(1-Ad)(2), -C(6)H(4)-PPh(2). To couple aryl iodides and acetylenes, the catalyst [(MeCN)(2)PdCl(2)]/2 R(P)-C(6)H(4)-PPh(2) was used in CH(3)CN/Et(3)N/n-heptane (5/2/5). The combined yields of coupling product over five reaction cycles are between 80-95 percent. There is no apparent leaching of the catalyst into n-heptane, as evidenced by (1)H NMR spectroscopy. The new catalyst [(MeCN)(2)PdCl(2)]/2 (1-Ad)(2)PBn can be used for room-temperature coupling of various aryl bromides and acetylenes in THF with HNiPr(2) as a base. A closely related catalyst Na(2)[PdCl(4)]/2 R(P)-CH(2)C(6)H(4)CH(2)P(1-Ad)(2) linked to the polymer was used to couple aryl bromides and acetylenes in DMSO or DMSO/n-heptane at 60 degrees C with 0.5 mol percent Na(2)[PdCl(4)], 1 mol percent R(P)PR(2) and 0.33 mol percent CuI. The combined yield of coupling products over five cycles is always greater than 90 percent, except for sterically hindered aryl bromides. The determination of the turnover frequency (TOF) of the catalyst indicates only a small decrease in activity over five cycles. Leaching of the catalyst into the product containing n-heptane solution could not be detected by means of (1)H NMR and TXRF; this is indicative of >99.995 percent catalyst retention in the DMSO solvent.