Hypersonic viscous shock layer on sweptback wings of infinite span at different angles of attack

A study is made of the flow of a viscous compressible gas in a hypersonic shock layer on sweptback wings of infinite span with blunt leading edge at different angles of attack. The equations of the hypersonic viscous shock layer with modified Rankine-Hugoniot relations across the shock wave and boundary conditions on the surface of the body that take into account slip and discontinuity of the temperature are solved by a method of successive approximation which yields not only an analytic solution for the first approximations but also an exact numerical solution when the method is implemented on a computer. The analytic solution of the problem is found in the first approximation. Expressions are obtained for the coefficients of friction and heat transfer on the surface of the body, and also for the profiles of the velocities and the temperature across the shock layer. Comparison of the analytic solution with the numerical solution reveals a satisfactory accuracy of the analytic solution for not too large Reynolds numbers.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 91–102, March–April, 1979.We thank G. A. Tirskii for his interest in the work and valuable discussions.     

Numerical investigation of the hypersonic viscous shock layer on wings of infinite span at angles of attack and slip

In the framework of the theory of a hypersonic viscous shock layer [1] with modified Rankine-Hugoniot relations [2] at the shock wave a study is made of flow past wings of infinite span with a rounded leading edge. A numerical solution to the problem has been obtained in a wide range of variation of the Reynolds number (5–10⁶), the blowing-suction parameter, the angle of attack (0–45 °), and the angle of slip (0–70 °). Data are given on the influence of the angle of slip on the profiles of the temperature and the velocity across the shock layer. A study is made of the dependence of the distributions of the pressure, the heat flux, and the friction coefficients along the surface of the body on the blowing-suction parameter and the angles of attack and slip.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 104–108, March–April, 1984.     

Laminar boundary layer on a yawed infinite cylinder

Using mixed momentum and energy integral equations, a simple quadrature method is developed to compute incompressible laminar boundary layer on a yawed infinite cylinder. As an illustration, the results — including various boundary layer thicknesses, form parameters and potential and surface streamlines — are obtained for a circular cylinder and compared with a known solution.     

Study of laminar boundary layer separation on a cone at an angle of attack

Experimental data are obtained on the position of the line of separation as a function of angle of attack, cone apex angle, and flow Mach number.     

Laminar boundary layer on an oscillating wedge

A study is made of the nonstationary laminar boundary layer on a sharp wedge over which a compressible perfect gas flows; the wedge executes slow harmonic oscillations about its front point. It is assumed that the perturbations due to the oscillations are small, and the problem is solved in the linear approximation. It is also assumed that the thickness of the boundary layer is small compared with the thickness of the complete perturbed region. Then in a first approximation the influence of the boundary layer on the exterior inviscid flow can be ignored, and the parameters on the outer boundary of the boundary layer can be taken equal to their values on the body for the case of inviscid flow over the wedge. They are determined from the solution to the inviscid problem that is exact in the framework of the linear formulation. The wall is assumed to be isothermal. The dependence of the viscosity on the temperature is linear. Under these assumptions, the problem of calculating the nonstationary perturbations in the boundary layer on the wedge is a self-similar problem.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 4, pp. 146–151, July–August, 1980.     

Laminar boundary layer of infinitely long elliptic cylinders for an arbitrary yaw angle

Results are presented of the calculation of the laminar boundary layer on infinitely long elliptic cylinders in a supersonic perfect gas flow at an arbitrary angle of attack. It was assumed that the Prandtl number is constant and equal to 0.7, the dynamic viscosity coefficient follows a power-law variation ( T^0.76) with temperature, and there is high heat transfer at the body surface (H_1w=0.05).The calculations showed that a change of the body shape—the ellipticity coefficient =b/a—has a significant effect on the nature of the distribution and the magnitude of the local heat flux.In evaluating the thermal fluxes at the blunt leading edges, swept wings are usually considered as infinitely long yawed cylinders. In studying heat transfer at the surface of bodies of small aspect ratio at high angles of attack, wide use is made of the hypothesis of plane sections, when each section, orthogonal to the longitudinal axis of the body, is considered equivalent to a corresponding yawed infinite cylinder.By now quite detailed studies have been made of the behavior of the boundary layer on an infinitely long yawed circular cylinder with both the laminar and turbulent flow regimes for a compressible gas [1, 2]. However, there are no data on the heat transfer at the surface of a yawed infinite cylinder with arbitrary cross section, although the availability of such data is urgently needed, for example, for the proper selection of the form of the leading edges of the swept wing.This article presents the results of the calculation of the characteristics of the laminar boundary layer on the surface of infinite elliptic cylinders in a supersonic perfect gas flow. The calculations were made over a quite wide range of flight Mach number M, yaw angle , and ellipticity factor . The data presented on the distribution of the relative heat flux along the cylinder directrix may be used also for estimating the heat flux with account for the real properties of air if we know the corresponding value of the heat flux in the vicinity of the stagnation line.     

Effect of disturbances at inlet on hypersonic boundary layer transition on a blunt cone at small angle of attack

To investigate the effect of different disturbances in the upstream, we present numerical simulation of transition for a hypersonic boundary layer on a 5-degree half-angle blunt cone in a freestream with Mach number 6 at 1-degree angle of attack. Evolution of small disturbances is simulated to compare with the linear stability theory （LST）, indicating that LST can provide a good prediction on the growth rate of the disturbance. The effect of different disturbances on transition is investigated. Transition onset distributions along the azimuthal direction are obtained with two groups of disturbances of different frequencies. It shows that transition onset is relevant to frequencies and amplitudes of the disturbances at the inlet, and is decided by the amplitudes of most unstable waves at the inlet. According to the characteristics of environmental disturbances in most wind tunnels, we explain why transition occurs leeside-forward and windside-aft over a circular cone at an angle of attack. Moreover, the indentation phenomenon in the transition curve on the leeward is also revealed.     

Hypersonic flow past delta wings of a certain class at angle of attack with an attached shock

We study the hypersonic flow of an inviscid ideal gas past a delta wing of small aspect ratio at a finite angle of attack. Increasing the Mach number M of the approaching flow to infinity for a constant geometric parameter characterizing the stream disturbance (for example, the body relative thickness or angle of attack), we obtain the limiting hypersonic flow pattern about the body, when the very strong compression shock approaches close to the body, forming a thin compressed layer of disturbed gas flow. Such a flow may be studied using the method of the small parameter, which characterizes the density ratio across the compression shock [1, 2].In [3,4] an analysis is made of the flow past conical wings whose aspect ratio is of order unity. In this case the compression shock will be attached to the leading edge. In [5] a study is made of the flow past wings of small aspect ratio which diminishes along with the small parameter in such a way that the wing half-apex angle has the same order of magnitude as the Mach cone angle within the compressed layer.In this case the angle of attack remains finite (of order unity) so that as M the hypersonic law of plane sections for slender bodies at large angles of attack [6] is satisfied, which together with the additional limit passage0 leads to the similarity law established in [5]. In this case both the case of the detached shock (when the similarity parameter <2), considered in [5, 7], and the case of the attached compression shock (>2) are possible.The monograph [2] reproduces the results of these studies with certain extensions, and also considers the direct problem of flow past a flat delta plate with attached shock, whose solution was found to contain several singular points which require further investigation.In the present study, considering the inverse problem, we were able to construct a closed pattern of the flow past wings of a certain class with thickness and with an attached compression shock, where the field of the gas-dynamic parameters and the shape of the wing surface and of the shock wave are everywhere continuous and do not contain any singular points with the exception of the known thin entropy layer near the stagnation point, which shows up only in the higher approximations [2, 4].In conclusion I would like to thank V. V. Sychev and V. Ya. Neiland for discussions of the subject and of the results, and I would also like to thank V. P. Kolgan for assistance in making the calculations.     

Heat transfer to blunt-edged swept wings at angle of attack in hypersonic flow

An approximate analytic solution is obtained for the relative heat fluxes on the lateral surface of swept wings of infinite span in a hypersonic viscous gas flow at angles of attack and yaw. The accuracy of the relations obtained is estimated on the basis of a comparison with numerical solutions. Moscow. Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 4, pp. 170–179, July–August, 1994.     

Wave processes in the shock layer on a flat plate at an angle of attack

A numerical and experimental study of receptivity of the viscous shock layer on a flat plate aligned at an angle of attack to external acoustic perturbations is performed. Density and pressure fluctuations are measured in experiments at the free-stream Mach number M _∞ = 21 and Reynolds number Re ₁ = 6·10 ⁵ m ⁻¹ . Direct numerical simulations of receptivity of the viscous shock layer to external acoustic perturbations in wide ranges of the governing parameters are performed by solving the Navier-Stokes equations with the use of high-order shock-capturing schemes. The calculated intensities of density and pressure fluctuations are found to be in good agreement with experimental data. Results of the study show that entropy-vortex disturbances dominate in the shock layer at small angles of attack, whereas acoustic perturbations prevail at angles of attack above 20°.     

Investigation of hypersonic flow of rarefied gas past wings of infinite span

In the framework of the locally self-similar approximation of the Navier-Stokes equations an investigation is made of the flow of homogeneous gas in a hypersonic viscous shock layer, including the transition region through the shock wave, on wings of infinite span with rounded leading edge. The neighborhood of the stagnation line is considered. The boundary conditions, which take into account blowing or suction of gas, are specified on the surface of the body and in the undisturbed flow. A method of numerical solution of the problem proposed by Gershbein and Kolesnikov [1] and generalized to the case of flow past wings at different angles of slip is used. A solution to the problem is found in a wide range of variation of the Reynolds numbers, the blowing (suction) parameter, and the angle of slip. Flow past wings with rounded leading edge at different angles of slip has been investigated earlier only in the framework of the boundary layer equations (see, for example, [2], which gives a brief review of early studies) or a hypersonic viscous shock layer [3].Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 150–154, May–June, 1984.     

Three-dimensional boundary layer and vortex wake over a cone at high angle of attack: study of asymmetries

An experimental investigation of the flow over a one at a large angle of attack is reported. First, the study was focused on the wall shear stress measurement, including the localization of the separation. Secondly, the mean flow field in the whole wake of the cone was measured, as well as the velocity fluctuations. Results indicate that the separation and the fluctuations are asymmetrical in a certain way, whereas the mean flow field is approximately symmetrical. Finally, the different parts of the flow can be easily determined using vorticity calculations.List of symbols C vortex core - D diffusion coefficient for the polarographic solution - D cone diameter for the rotation plane of the electrochemical probes - D separation point - F function F (sin ) = (K ₁-K ₂)/(K ₁+K ₂) - G function G(sin ) = (K ₁+K ₂)/(K ₁+K ₂)( = 90dg) - g bidimensional gain of the electrochemical probe (constant for each probe) - K ₁, K ₂ mass transfer coefficients for differential probes - Re _x Reynolds number based on the X length, and relative to the forward upstream velocity - wall velocity gradient vector - S wall velocity gradient modulus - S enclosing saddle point - S _x azimuthal component of the wall velocity gradient (perpendicular to a generator) - S _z longitudinal component of the wall velocity gradient (along a generator) - U mean value of the forward upstream velocity - U _i component number i of the velocity vector in the (X, Y, Z) coordinates - X, Y, Z cone cartesian coordinates - non-dimensional cone cartesian coordinates (relative to D) Greek symbols incidence (part 1) angle between the wall velocity gradient and the neutral axis of the electrochemical probe (except part 1) - _r relative incidence /0 _c - velocity circulation - wavelength of the laser beam - kinematic viscosity - azimuthal angle - _c cone semi-apex angle     

Laminar boundary layer in a swirling flow

The spatial non-self-similar boundary layer in a compressible gas in a swirling flow is studied. Boundary-layer equations are written in variables ensuring constancy of the coefficients of first derivatives and are solved by the finite-difference method. Boundary-layer peculiarities in the presence of a return circulation region in the channel are clarified.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 43–49, January–February, 1976.